Statistical pricing condition management with TPM

Hi gurus,
we're planning to introduce a statistical pricing condition and we would like that triggered by TPM.
To be precise, that condition is statistical in the sense that it does not change the price charged to the customer but it generates FI posting and we want the related amount synchronized with TFM.
Do you gurus think this is doable?
Regards
C

HI Ravin,
Based on the details you have provided below could be the possible reasons:
1. I see alternate calculation type routine 909 assigned to condition type GRWR in pricing procedure. Try removing this routine. If it works, ask some from ABAP to debug the issue.
2. In condition type configuration(for GRWR), condition category is selected as L - "Generally new when copying".
With this config, condition type will always be redetermined and not copied from reference document even when copy controls are maintained correctly.
Most I believe option 2 would be your case.
Regards,
Ram

Similar Messages

  • Pricing condition type with print option

    I have a special requirement.  Printing option "b" maintained for condition type in pricing procedure.  Example ZR00.  For some customers this should not print and should allow only for specific customers.
    Any clue will appreciated.
    Please don't send the links.
    Suddu

    hi,
    is it that those conditons that are printed are only applicable to a particular customer.
    or
    though a conditoin is applicable but still you dont want to show.
    However my observation is, it requires some enhancement of Z table kind of thing. Reason is a discount which needs to be printed today may not be required tomorrow to be printed or the other way round. It depends on the customers business nature with your client. In such case it has to be part of master data where the enduser should have an option to make the necessary entries from time to time.
    If we hard code in the print program initially it can work. It will check the customer and print only those discounts but tomorrow if there is a change we have move a request to the print program again which is not the right approach.
    regards
    sadhu kishore

  • Statistical Pricing Condition - Purchase Order

    Hello,
    We have a condition type in the Sales Order that is created as a Statistical Condition. However, in the PO this condition is being added in the net value. The item category for this item in the PO is 'Third-Party'.
    Is there a way to prevent this from happening.
    Thanks, Pankaj

    Hi Pankaj,
    The Pricing Procedures for Sales Order and the Purchase Order are different. So even if you have made a Condition Type as Statistical in the Pricing Procedure for Sales that doesn't mean it is going to be statistical in Purchase Calculation Schema.
    Check whether the Condition type has been made as Statistical in the Purchase' Calculation Schema.
    Regards,
    Karthik.

  • Pricing condition settings with list cond type

    Hi all,
    I have a very urgent problem in pricing settings. We are in CRM 4.0 sp6 scenario linked to an ECC 5.
    In ECC 5 have been set some condition record that provide the field "list cond type" as blank. This are calculated in ECC but not in CRM that cannot read the blank as value.
    Any ideas?
    Very urgent.
    Thank in advance.
    Fabrizio

    Hello Fabrizio,
    Please refer 1010258 and see if this helps.
    Please reward some points.
    regards,
    Muralidhar Prasad.C

  • Pricing condition type with Scale basis "G"

    Hi,
    Did anybody tried to use scale basis "G"?
    I created formula for scale base where I calculate xkwert. The value seems correctly transferred to kstbs (scale base value) in sales order pricing, but the amount of the condition is not recalculated accordingly.
    Thanks
    Carlo
    I solved the problem today. Thanks all.
    Message was edited by: Carlo Noventa

    Hi Tushar
      You need to create your own formula or routine in Transaction VOFM.
      Put this routine in front of your condition type in Pricing procedure.
      Also in maintain condition types keep your scale basis as 'G'
       Reward if this help.
    Regards
    Karan

  • How to disable pricing condition create with reference in VK11, VK12 & VK13

    we have given the release status for all pricing entry; from VK13 pricing display mode if we select create with reference then Proc status is defualtly it is in the released status.

    Hi,
    I feel that the Generation of Field is not properly done, while creating the table. you can create the new table with the same fields and click on the icon FIELD GENERATION at the left corner of the screen with red and white circle. you can confirm by clicking on the field attribute icon.
    hope this will help,
    Reward if help
    Manoj

  • T code/ report to list all material sales pricing condition with deletion i

    I create sales org/ material level pricing conditions in VK11. Some unwanted material pricing conditions are with Deletion indicator active. Iu2019m looking for a report to list all material sales pricing condition with deletion indicator active.
    Please advice me on this.

    Hi Goto v/ld and select 16 which stands for individual prices, and then populate sales organization, distribution channel, customer ,material numbers,etc...and tick "Cond.marked for deletion" check box in "list screen" tab which is the most important, execute you will be able to see all material pricing condition even though it had been deleted.

  • Creation of Customized field for  Pricing Condition tables

    Hi Friends
    I have a requirement to create a  Pricing condition table with Customized field starts with 'Z'  and
    Field length should be more than 80.
    After creating New Customized Field, system  is not allowing to create Pricing Condition table and giving error 'Too Many fields selected (larger than 100 bytes)'.
    Could you please advice how to over come this error and Maximum field to create Pricing  condition table .
    Thanks
    Ravi

    Hi there,
    Table & table attributes are defined by the ABAPers. Not by finctional consultants.
    You need to have an access key to define new tables & access sequence.
    Check with your ABAPer. He will be able to help you with that.
    Regards,
    Sivanand

  • Table for existing PO/Sch.Agg pricing condition types

    Hi Experts,
    Which table will have PO / Sch.Aggrement  - pricing condition types with values as maintained in PO (like freight / P&F etc). I have the input of PO/Sch.Agg ref, plant, vendor & material.
    We have created Z condition types for freight/ P&F and using the same in PO/Sch.Agg.
    Thanks,
    Jeeva

    HI,
    Same status.
    In table EKKO also field "Doc. condition no." is updating for PO only, which is same as we find in EKKI. For Sch.Agg it it not updating the Doc.Condition no and remains blank.
    Any way i have gone thro a different route. since I am looking for delivery condition for a completed GR, I can pick the conditions  from EKBZ table.
    Thanks.
    Jeeva.

  • Pricing condition,automatic display without doing VK11 firstly, how ?

    Hi all, another question.
    I have a pricing condition in my sale order. and its value is determined by Pricing Conditions Routines with Conditions Value.
    How can it automatic display in the condition of my sale order, without doing VK11 firstly.
    My english is poor, so I hope u can understand these.

    Hi
    As I said in my previous thread , go to VOFM->Pricing, and check in the requirements if any standard requirements are meeting your requirement or not .If it is not meeting then create a new requirement with the help of  technical consultant.  and assign the requirement  in the Pricing  procedure requirement feild for the condition type and then check wheather it is capturing the price or not in the sales order and billing documents.
    Regards
    Srinath

  • FM to get Pricing Conditions

    Hi Friends,
    I have a requirement to <b>compare the Quotations</b> in which I have to check the prices against the pricing conditions.
    Is there any FM from which we can get the <b>pricing conditions</b> with the <b>condition types</b>.
    Regards,
    Vaithy.

    Hi Vaitheeswaran,
    see the below code snippet.
    Note that you should call RV_PRICE_PRINT_REFRESH a l w a y s before 'RV_PRICE_PRINT_ITEM'. The comm_head_i parameter needs an order number and a condition record number (KNUMV).
    In result table tkomv are all conditions, tkomvd only conditions relevant for printing.
    call function 'RV_PRICE_PRINT_REFRESH'                    "RESET
         tables tkomv                         = pt_komv.
      move-corresponding:
        ps_nast    to ls_komk,
        ps_jhak to ls_komk.
      call function 'RV_PRICE_PRINT_ITEM'
        exporting
          comm_head_i                         = ls_komk
          comm_item_i                         = ls_komp
    *   LANGUAGE                              = ' '
    *  IMPORTING
    *    COMM_HEAD_E                          = COMM_HEAD_E
    *    COMM_ITEM_E                          = COMM_ITEM_E
        tables
          tkomv                               = pt_komv
          tkomvd                              = pt_komvd.
    Regards,
    Clemens

  • Modification of MIGO Financial Posting from Custom Pricing Conditions on PO

    Hello All,
    I am currently at a client where there are 7 custom Pricing Conditions associated with Sub-Contracting POs. Because there is a Global Template in place, there is no way to include these custom Pricing Conditions in the typical Purchaing Automatic Account Determination.
    We are considering a custom development whereby we would associate each custom Pricing Condition to a unique Expense GL Account, but have it all lumped to the same GR/IR LIability Account.
    My big question is....does anyone know where/how we can hook up a User Exit, BAdI, BAPI, or some other method  to affect the GL Posting based on a look up table, upon the posting of a MIGO transaction?
    Any assistance with this would be greatly appreciated.
    Thank,
    Marc

    hi,
    in the condiion type remove the Quantity scale basis and try
    Thanks

  • Free Goods with pricing condition (Urgent)

    Hi MM Expert,
    we have a probleme with free goods. because in PO item of free goods, there is no condition management (no Invoice entry) but we should manage some pricing condition for the item (spécifique condition relative to transport, ...).
    so are the any way of managing the expenses annex condition(transport charge, customs clearance charges,…) for the free goods in an item of Purchase Order ??
    thank's in advance.
    Said

    Hi,
    This is not possible to maintain the condition s for free goods because while creating the PO for free goods by selecting the free goods tad at item level, There is no Condition tab at Item detail .means you are not able to mainatin conditions.
    If you want to maintain the conditions ,you have to treat as a Normal scenarios .
    Regards
    Sanjay L

  • Problem with pricing condition type in case of proforma invoicing

    Hello All,
    the problem is related to a pricing condition type in case of proforma invoice where the details are as follows -
    Name of Condition Type - ZADC - Add 10% on Cost                                         Access seq.   Z038 Diff
                                                                                    Plus/minus    A Positive
    Cond. class -  A Discount or surcharge
    Calculat.type -  A Percentage
    Cond.category - Blank
    Manual entries      D Not possible to process manually
    Amount / Percent - Checked
    Item Condition - checked
    Scale Basis - Quantity
    Currency Conversion - Checked
    Quantity Conversion - Checked
    This condition type has been kept as statistical in the pricing procedure. Still in the proforma invoice the condition type is not getting reflected automatically , whenever I am updating with " carry out new pricing " option the condition type is getting populated.In case of other commercial invoices this very condition type is getting populated automatically without any updates.Along with this point to be noted is that the Condition type in which the actual costi is captured has been kept active.
    What more needs to be configured or what are the changes to be done to populate the condition type automatically as statistical during the time of proforma invoicing?
    Thanks & Regards
    Priyanka Mitra

    Hi,
    Kindly do the pricing analysis and check whether you have the following error such as
    Inactive condition type because of subsequent price,
    Regards,
    Ravi

  • User exit to copy Manual pricing conditions with in sales documents

    Hi all,
    I have a situation where i have to copy the manual pricing conditions from inquiry to quotation.
    Problem: From VA21 when I try to do the same using the tab "create with reference" the document is being copied but the manually set pricing condition in the inquiry is not being copied into quotation. This is because in the copy controls the pricing type is set to 'B' which means "carry out new pricing". I can change it to 'C' or 'D' so that it copies manual pricing but i am not allowed to do so because other sales orgs in the company has a problem if i do so. Only our perticular sales org needs this config. I cannot even create another item catogory specific to this plant because it is against the rules of the company. So I am looking for a user exit in which i can change this pricing type during runtime so that i can plug in some code specific to this sales org to copy manual pricing. I have found one from the SAP note 24832 (MV61AFZA). It doesn't work as i think its obsolte. Can anyone suggest me a better way of solving this issue. Any quick response is appreciated.
    Thanks,
    Giridhar.

    Hi
    The following EXITS may help you
    Exit Name              Description                                                                               
    SDTRM001            Reschedule schedule lines without a new ATP check                 
    V45A0002            Predefine sold-to party in sales document                         
    V45A0003            Collector for customer function modulpool MV45A                   
    V45A0004            Copy packing proposal                                             
    V45E0001            Update the purchase order from the sales order                    
    V45E0002            Data transfer in procurement elements (PRreq., assembly)          
    V45L0001            SD component supplier processing (customer enhancements)          
    V45P0001            SD customer function for cross-company code sales                 
    V45S0001            Update sales document from configuration                          
    V45S0003            MRP-relevance for incomplete configuration                        
    V45S0004            Effectivity type in sales order                                   
    V45W0001            SD Service Management: Forward Contract Data to Item              
    V46H0001            SD Customer functions for resource-related billing                
    V60F0001            SD Billing plan (customer enhancement) diff. to billing plan      
    V45A0001            Determine alternative materials for product selection
    Regards
    PRabhu

Maybe you are looking for