Pricing condition settings with list cond type

Hi all,
I have a very urgent problem in pricing settings. We are in CRM 4.0 sp6 scenario linked to an ECC 5.
In ECC 5 have been set some condition record that provide the field "list cond type" as blank. This are calculated in ECC but not in CRM that cannot read the blank as value.
Any ideas?
Very urgent.
Thank in advance.
Fabrizio

Hello Fabrizio,
Please refer 1010258 and see if this helps.
Please reward some points.
regards,
Muralidhar Prasad.C

Similar Messages

  • Statistical pricing condition management with TPM

    Hi gurus,
    we're planning to introduce a statistical pricing condition and we would like that triggered by TPM.
    To be precise, that condition is statistical in the sense that it does not change the price charged to the customer but it generates FI posting and we want the related amount synchronized with TFM.
    Do you gurus think this is doable?
    Regards
    C

    HI Ravin,
    Based on the details you have provided below could be the possible reasons:
    1. I see alternate calculation type routine 909 assigned to condition type GRWR in pricing procedure. Try removing this routine. If it works, ask some from ABAP to debug the issue.
    2. In condition type configuration(for GRWR), condition category is selected as L - "Generally new when copying".
    With this config, condition type will always be redetermined and not copied from reference document even when copy controls are maintained correctly.
    Most I believe option 2 would be your case.
    Regards,
    Ram

  • Transfer pricing conditions ( Ecc) to Customs Duty Types (GTS)

    Hi Experts,
    We are currently using ECC 6.0 with GTS 7.0.
    In GTS 7.0 , the option to Map the Customs Duty type to Pricing condition type does not appear. Can you share where I can look for the same
    The condition records from proforma Invoice (ECC) are transferred to GTS Customs Declaration.
    However, we have certain condition types with calculation type as percentage in ECC which need to flow over to GTS.
    1.  What changes need to be carried in the corresponding boldcustoms duty type configurationbold in GTS to ensure that we get a correct data transfer..
    2.  what unit type / currency needs to be maintained to map the "%" appearing in condition record value (ECC) to the customs duty value (GTS).
    Regards
    Jasmit

    Thank you Sathya,
    I attempted to navigate via the given path but could not locate the option of having the assignments there.
    The condition type that is in scope of the dicussion is already getting transferrred to GTS via the standard mechanism( we havent modified the BAdI for this)
    However, the issue being encountered is that te condition record value holds a percentage figure.. this in turn is not getting mapped to the currency of customs duty type .
    How do I achieve this mapping in GTS ... Do i need to modify the BAdi to carry out the calculation before transferring this to GTS or alternatively some standard configuration in GTS can help me achieve this  mapping.
    Regards
    Jasmit

  • Validation of attribute in Entity Object with List Rule Type

    hi all
    I have an entity "currncy" and I want to make
    a validation in entity level on its attribute "Isdefaultcurrency"
    which is boolean.
    Entity Object : Currency
    attributes :
    1. Currencyid DBsequence
    2. Currencyname String
    3. Isdefaultcurrency, Boolean, CheckBox
    Rule Type : List
    Operator : In
    List Type : Query Result 'select ISDEFAULTCURRENCY from currency where ISDEFAULTCURRENCY=1'
    I want when user insert in table, validation checks the attribute 'Isdefaultcurrency'
    was true then show the error message that there was default currency and if you
    want to set it to true (or default) you must change another record that was true
    and uncheck it then back to current record and will make it true and
    there is one record in my table that its attribute 'Isdefaultcurrency' must be true
    this validation that I used , it does not work correctly and it allows to enter 2 records with
    true value for Isdefaultcurrency. In fact I want when User Enter the First record and
    set the Isdefaultcurrency to true then enter the second record and set the Isdefaultcurrency
    to true the error message will be shown.
    pleas explain it
    Edited by: Marzieh on Jan 30, 2012 9:43 PM

    Is it that you want to only allow one record in the table to have isdefaultcurrency='1'?
    yes , that is correct . I used Oracle DataBase .
    DECODE(isdefaultcurrency, 1, 1, null) please explain about it.
    isdefaultcurrency attribute has boolean Type with 0 or 1 values.
    I would like to show an error if check box was checked for the second time. The idea is that just
    one check box should be checked.
    thanks for your answer

  • Problem with STO cond.type FRB1

    Hi Seniors,
        For Stock Transport Order the system is not considering the Freight condition FRB1 filled in the Header of the Purchase order. As a result, the system is not calculating the GR/IR value and the related FICO posting waiting for the Invoice from the Vendor.
    In the header there are 3 condition records for FRB1 for
    10,07  EUR
    1.840,00  USD
    135,81  EUR
    When posting the Goods issue , in the Accounting document we can't find any posting related condition FRB1 to Freight clearing and Freight finish goods (FR1 and FRE accounting procedures linked to condition type FRB1)"
    Kindly help me
    Regards,
    Jana

    Hi,
      Accurals has been ticked in M/06. What is the use of that ? both header and item condition has been ticked in M/06. what shoudl i do???
    regards,
    janamm

  • How to disable pricing condition create with reference in VK11, VK12 & VK13

    we have given the release status for all pricing entry; from VK13 pricing display mode if we select create with reference then Proc status is defualtly it is in the released status.

    Hi,
    I feel that the Generation of Field is not properly done, while creating the table. you can create the new table with the same fields and click on the icon FIELD GENERATION at the left corner of the screen with red and white circle. you can confirm by clicking on the field attribute icon.
    hope this will help,
    Reward if help
    Manoj

  • T code/ report to list all material sales pricing condition with deletion i

    I create sales org/ material level pricing conditions in VK11. Some unwanted material pricing conditions are with Deletion indicator active. Iu2019m looking for a report to list all material sales pricing condition with deletion indicator active.
    Please advice me on this.

    Hi Goto v/ld and select 16 which stands for individual prices, and then populate sales organization, distribution channel, customer ,material numbers,etc...and tick "Cond.marked for deletion" check box in "list screen" tab which is the most important, execute you will be able to see all material pricing condition even though it had been deleted.

  • Assigning Duty Types to Pricing Conditions

    Hello all,
    I have certain pricing conditions in the R/3 Purchase Order that I'd like to appear as a duty type in a Customs Declaration in GTS. I have assigned the GTS duty type to the R/3 Pricing Condition type in the IMG
    (SAP Customs Management -> Customs Processing -> Calculation of Customs Duty -> Assign Duty Types to Pricing Condition Types from Feeder Systems -> Assign Duty Type to Pricing Condition Type at Feeder System Level)
    and have activated the relevant BAdI in R/3, however the value I enter for the pricing condition in the PO doesn't get transferred. Does anyone have any experience with this that might be able to offer some advice as to why the value is not being transferred?
    Thanks in advance for your help.

    Hi ,
    You have to define
    Define Customs Duty Framework  under Calculation of Custom duty in GTS if you need different duty type  to be appeared on the custom shipment document..
    If you need further control on these Duty type then configure
    Configure Control Settings for Customs Duty Calculation
    And also Make sure that do the assigenment of pricing condition to your defined duty type in GTS under
    *Assign Duty Type to Pricing Condition Type at Feeder System
    Kind Regards,
    Sameer

  • COPA condition record with quantity scale value

    Hi Expert,
    My client wants to calculate value of AIrport Ground handling charge based on number of landing. My client has entered into an agreement with GH service provider where  cost varies with the number of landing. for example
    cost for first 100 landing at a location will be Rs 2000. then Cost of 101 to 200 is  Rs 90.
    So in case  to total landing  for a month amounts to 110 number. the expense to be booked would be
    100*2000 = 200000
    10*  90     =       900
    Total             200900.
    Can this be done   through COPA  condition record feature? If yes How
    Thanks in advance
    Pankaj

    Hi Sreedhar,
                     I am quite surprised with this requirement from the customer, Anyways this cud be acheived by the following ways...
    1.The condition in the pricing procedure shpuld not be a mandatory condition.
    2.In the pricing condition settings you need mainatin the entry 'D' in the manual entries field.
    3.Create a condition record for the codition type maintain null values and save the cond record.
    4.Create a sales order and check the results..
    Lemme know if you got the solution you required.
    Regards,
    Girish

  • Pricing condition,automatic display without doing VK11 firstly, how ?

    Hi all, another question.
    I have a pricing condition in my sale order. and its value is determined by Pricing Conditions Routines with Conditions Value.
    How can it automatic display in the condition of my sale order, without doing VK11 firstly.
    My english is poor, so I hope u can understand these.

    Hi
    As I said in my previous thread , go to VOFM->Pricing, and check in the requirements if any standard requirements are meeting your requirement or not .If it is not meeting then create a new requirement with the help of  technical consultant.  and assign the requirement  in the Pricing  procedure requirement feild for the condition type and then check wheather it is capturing the price or not in the sales order and billing documents.
    Regards
    Srinath

  • FM to get Pricing Conditions

    Hi Friends,
    I have a requirement to <b>compare the Quotations</b> in which I have to check the prices against the pricing conditions.
    Is there any FM from which we can get the <b>pricing conditions</b> with the <b>condition types</b>.
    Regards,
    Vaithy.

    Hi Vaitheeswaran,
    see the below code snippet.
    Note that you should call RV_PRICE_PRINT_REFRESH a l w a y s before 'RV_PRICE_PRINT_ITEM'. The comm_head_i parameter needs an order number and a condition record number (KNUMV).
    In result table tkomv are all conditions, tkomvd only conditions relevant for printing.
    call function 'RV_PRICE_PRINT_REFRESH'                    "RESET
         tables tkomv                         = pt_komv.
      move-corresponding:
        ps_nast    to ls_komk,
        ps_jhak to ls_komk.
      call function 'RV_PRICE_PRINT_ITEM'
        exporting
          comm_head_i                         = ls_komk
          comm_item_i                         = ls_komp
    *   LANGUAGE                              = ' '
    *  IMPORTING
    *    COMM_HEAD_E                          = COMM_HEAD_E
    *    COMM_ITEM_E                          = COMM_ITEM_E
        tables
          tkomv                               = pt_komv
          tkomvd                              = pt_komvd.
    Regards,
    Clemens

  • Modification of MIGO Financial Posting from Custom Pricing Conditions on PO

    Hello All,
    I am currently at a client where there are 7 custom Pricing Conditions associated with Sub-Contracting POs. Because there is a Global Template in place, there is no way to include these custom Pricing Conditions in the typical Purchaing Automatic Account Determination.
    We are considering a custom development whereby we would associate each custom Pricing Condition to a unique Expense GL Account, but have it all lumped to the same GR/IR LIability Account.
    My big question is....does anyone know where/how we can hook up a User Exit, BAdI, BAPI, or some other method  to affect the GL Posting based on a look up table, upon the posting of a MIGO transaction?
    Any assistance with this would be greatly appreciated.
    Thank,
    Marc

    hi,
    in the condiion type remove the Quantity scale basis and try
    Thanks

  • Creation of Customized field for  Pricing Condition tables

    Hi Friends
    I have a requirement to create a  Pricing condition table with Customized field starts with 'Z'  and
    Field length should be more than 80.
    After creating New Customized Field, system  is not allowing to create Pricing Condition table and giving error 'Too Many fields selected (larger than 100 bytes)'.
    Could you please advice how to over come this error and Maximum field to create Pricing  condition table .
    Thanks
    Ravi

    Hi there,
    Table & table attributes are defined by the ABAPers. Not by finctional consultants.
    You need to have an access key to define new tables & access sequence.
    Check with your ABAPer. He will be able to help you with that.
    Regards,
    Sivanand

  • Problem with pricing condition type in case of proforma invoicing

    Hello All,
    the problem is related to a pricing condition type in case of proforma invoice where the details are as follows -
    Name of Condition Type - ZADC - Add 10% on Cost                                         Access seq.   Z038 Diff
                                                                                    Plus/minus    A Positive
    Cond. class -  A Discount or surcharge
    Calculat.type -  A Percentage
    Cond.category - Blank
    Manual entries      D Not possible to process manually
    Amount / Percent - Checked
    Item Condition - checked
    Scale Basis - Quantity
    Currency Conversion - Checked
    Quantity Conversion - Checked
    This condition type has been kept as statistical in the pricing procedure. Still in the proforma invoice the condition type is not getting reflected automatically , whenever I am updating with " carry out new pricing " option the condition type is getting populated.In case of other commercial invoices this very condition type is getting populated automatically without any updates.Along with this point to be noted is that the Condition type in which the actual costi is captured has been kept active.
    What more needs to be configured or what are the changes to be done to populate the condition type automatically as statistical during the time of proforma invoicing?
    Thanks & Regards
    Priyanka Mitra

    Hi,
    Kindly do the pricing analysis and check whether you have the following error such as
    Inactive condition type because of subsequent price,
    Regards,
    Ravi

  • Report to check materials list with missing pricing conditions

    Hi,
    I have two levels in the BOM. Sales material in the top and purchase material in the bottom. I create VK11 pricing (condition type: XP00) for SALES ORG/ MATERIAL and SALES ORG/ MATERIAL/ CUSTOMER level for both materials. Is there any standard SAP report to display materials I missed to enter pricing conditions.
    Thanks,
    Sam

    Dear Sam
    I dont know there is such report which fulfills your requirement. but i suggest you to run V/LD and select Material Prices at 15. Give sales organization, distribution channel, condition type and material range from and to. For example i just executed report with
    Sales organization        1000
    Distribution Channel       60
    Material                          1900000         1999999
    Condition                        PR00
    The system will show you the materials for which you have maintained condition record. Export this report to excel and use VLOOKUP for your requirement.
    Update your response.

Maybe you are looking for