Status report template activation and assignment

Hi,
when I try to create Status report after selecting the Document folder and clicking the New Status report in Status Report tab of cproject, an error message is appearing as
'No templates for status reports have been entered for the project type' .
Where can assign the templates for staus reports?(SPRO or somewhere)
Also We have configured ADS already and able to generate Approval Documents. Can anyone guide this problem?
Regards,
Ramesh
muthurameshsap at gmail com

Hi Bharathi,
First check whether ADS is installed on Java stack. For this goto SA38 transaction and give report name FP_TEST_00 and execute it. Leave the fileds as it is and execute it. A dailog box will pop up asking printer name. Give it as PDF1 and check preview.
If it is working fine, check if any forms are active for the project type you have taken.
For example, if you took upgrade project, goto spro > cprojects > basic settings > forms for printing and for status reports > Execute activate forms per project type.
Select Your project type and double click on PDF print form. If you are not able to see any entries, goto new entries and select DPR_STATUS_REPORT_AIF and check the boxes Active and Status Report.
Revert if any issue.
Regards,
Syam
Edited by: syam sundar on Oct 28, 2008 4:55 AM

Similar Messages

"System status AALK is active" and "System status LKD is active" errors

Hi,
We are on SRM 4.0. When creating a shopping cart from a specific catalog the user is receiving two error messages.
"System status AALK is active" and "System status LKD is active"
How do I resolve these errors?

It's more like a CA-JVA-JVA-PP or PS-ST-INT-BAPI issue, recommend to report a message under one of the component.

ECC IM report, the available and assigned budgets are not correct

Hi All
Can any one tell me why there is a difference in the ECC IM report, the available and assigned budgets are not correct on program position level.
But individual investment order level, they are correct..
The report we are running is : S_ALR_870122806 .
Any help higly appreciated and points are assigned .
Cheers
ravindra .

Hi,
Tcode GR23 , Under 1VK Report library, Choose Characteristics Tab for Company Code Select BUKRS,and GSBER for Business Area.
Regards,
Shankar K B

Financial Report Templates - Creation and input of accounts

Hi,
At the time of creating Financial Report Templates, these templates can be very time consuming and tedious to create, as for the inputting of accounts within each account category - filling out one or more details...
It would be helpful to have some kind of tool in which we could associate like in the GL all the sub accounts withing that account.
I hope I have been clear enough,
Regards
Vivek Chand

Hi:
I'm agree with your post, all my customer are very angry with this functionality because the want use wildcards for input the account, if i input 71* the template will show all account which begin with 71.
Now when they create a new account into the financial plan of accounts they must create also into the report templates and this work is hard and spend a lost time in it.
Best Regards
Joaquin Gomez

Create new transaction (Business Activity) and assigned to user Problem

Dear sir,
We already have the business activity with in T-code : CIC0, The transaction is ZACT1 and assigned to user group1 . It's working fine. However when I copy something from transaction ZACT1 and create to be T-code : ZACT2 . and assigned user group2. There is the problem that when log on to CIC0 . It is the authorization from for transaction ZACT1. WHen I go to su53
it need to have the authoriazaiton on Business transaction type: ZACT1
Please kindly advise.
Thank you and best regards,
Vimol

When you create new transaction variant, original transaction remains as it is. During creation of transaction variant, when you go to one by one screen, screen variants are created. It uses variant name and can be see on each screen on the top.
Once you complete trasnaction, you start using this transaction variant instead of original transaction. In SHD0, there is button on the top 'assign screen variants' which allows you to assign all screen variants created above. You can refer help file which i think has procedure to do this.

Fetch table value in BEX Web report using Javascripts, and assign condition

Hi Gurus,
I am currently using WAD 3.5. I need to change the web report to behave like below :-
1. Default layout (Field A B C) with condition A & B activated.
2. If the drilldown Field B and C is removed, leaving only field B alone in the report drilldown, deactivate condition A & B, Activate condition C & D.
3. the above can be reversed where user drilldown field B & C into the layout, the condition A & B need to then be activated back.
So I believe this can be done using Javascript. So my questions are below
1.) How do i fetch table value for the navigationblock ? with navigationblock i am able to know what are the columns are in the drilldown (i will not display free characteristics, so ignore this part). how do i read the content of NAVIGATIONBLOCK_1 as shown in following code? using javascript.
<object>
 <param name="OWNER" value="SAP_BW"/>
 <param name="CMD" value="GET_ITEM"/>
 <param name="NAME" value="NAVIGATIONBLOCK_1"/>
 <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_NAV_BLOCK"/>
 <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
 <param name="SHOW_FREE_CHARACTERISTICS" value=""/>
 <param name="SHOW_NAVIGATION_ICONS" value=""/>
 <param name="SHOW_FILTER_ICONS" value=""/>
 ITEM: NAVIGATIONBLOCK_1
</object>
2.) After question 1.) is done, please advice how do i activate/deactivate the conditions? based on the fields found in above. Maybe I can use IF navigationblock_1 contain field A only, then set condition A & B , etc.
<object>
 <param name="OWNER" value="SAP_BW"/>
 <param name="CMD" value="GET_ITEM"/>
 <param name="NAME" value="CONDITIONLIST_1"/>
 <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_CONDITION"/>
 <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
 ITEM: CONDITIONLIST_1
</object>
I would appreciate if we can solve Question 1 first before proceed to 2.)
Please advise. Thanks

Hi JTi,
what i have understood from your requirement is that you want to access the web item table_1 in javascript, you can get that as below:
Add

tag before your web item and set its id to table.

<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="GET_ITEM"/>
<param name="NAME" value="TABLE_1"/>
<param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
<param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
<param name="GENERATE_CAPTION" value=""/>
<param name="CAPTION" value="jezel"/>
<param name="ONLY_HIERARCHY_NAVIGATION" value="X"/>
<param name="BLOCK_SIZE" value="0"/>
<param name="SHOW_PAGING_AREA_BOTTOM" value=""/>
ITEM: TABLE_1

In javascript access it as :
var mytable = document.getElementsById("table");
Hope this helps
Thanks
Dipika

Where is the best target location to put configuration files (.csv), report templates (,dotm) and instructions (.pdf) when building a LabVIEW program and installer?

I am unsure of the best location to the above type of support files. I would like the files to be available to all users accounts. If I place them into something like c:\LabVIEW support files this can create an issue if manual changes are made to any of these files by a user without administrative rights. I can also place them into public documents. Any recomendations?
Related. I have added a PDF "help" file to the project. and given a path in the VI properties documentation field. I have then added a custom runtime menu with "Help for This VI". Running the application on my development machine, it works just fine. Making this in an application installed on a test machine, results in the application crashing. The PDF file is in the correct location on the target machine. Any ideas?

It seems you want to put the files where just any user can't get to them to edit them. Unfortunately, if the user account can't get to them, I don't think LV will be able to get to them. I could be wrong. To test this out, use a target location somewhere under your user account folder and then have another user try to run the app. if LV finds them then that gives you more options. If not, then you are going to have to have a common location that users are not likely to go to.
I generally create a dedicated folder structure for LV apps on a target system as shown below. I also make this the My Documents folder so that the LabView Data folder is created under this structure. Yea, it means that users can get to the files but that's where training needs to be executed. If you are in a network environment, you can place the templates, config (ini) files, etc on a network location and users are a bit less likely to inadvertently navigate to them.
I use both for some apps, Local folders for system specific files and Common folders on the network for files that all systems will share.
Not sure if this will address your location issues but thought I would share it nonetheless.
Doug
"My only wish is that I am capable of learning each and every day until my last breath."

Project Status Report - cProjects 4.0 - Run time error

Under Basic Settings, I go to 'Forms for Printing and for Project Status Reports'. Here, under 'Create PDF-Based Forms', I select the form 'DPR_STATUS_REPORT_AIF' and Activate it. I then get to 'Activate Forms per project type'.I get to 'New Entries' and add 'DPR_STATUS_REPORT_AIF' and also set the 'Active' and 'Status Rpt' checked.
When I get to cProjects front end, I see the 'Project Status Report' template under the 'Status Report' tab. However, when I click on the 'Preview' button, I get to see a dump.
"The following error text was processed in the system SRP : WebDynpro Exception: SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send returned with status code(100.101)"
Can someone please suggest how to get something useful at the click of the preview button?
Thanks.

Hi,
Yes your basis team should tell you more about this. ADS Credential needs to be installed on the java stack of your cProjects Server. For this you will have to send a message to SAP requesting for the ADS Credential. You will then receive a credential file with its password.
However not all servers support ADS. There is a list of server names that support ADS. You can get the server name on which cProjects is installed from your basis team and I shall let you know if it is supported or not. You can also have a look at in the PAM (Product availability Matrix) for SAP NetWeaver 2004s - Additional Components at http://service.sap.com/pam
Regards,
Reema.
Pl award all useful answers.

CProjects 4.0 - Status Report

Hi all,
I have activated the following forms for a project type:
DPR_STATUS_REPORT_HTML
DPR_STATUS_REPORT_PDF
DPR_FORM_STATUS_REPORT
Also I have Checked the Status Reports checkbox in the Project type because of which I can see the Status report tab in the particular project type.
However, when I say create status report I get the following error message:
No templates for status reports have been entered for the project type
Regards,
Reema

Hi.
Did you find a solution for the problem described (e.g. the shortdump received after pressing the Preview button) for the Project Status Report?
We have the same error in my project.
Regards / Anders
Ps.
The preparations done is that
a) status reports are activated in the project type used
b) the PDF print form DPR_STATUS_REPORT_AIF is ticked as active and a status rpt in the IMG step "Activate forms per Project Type".

CProjects Project status report not generated

Hi
I am facing problem of getting Project status report for a project in cProjects 4.0
I am at client side and accessing the IDES ECC6.Her I am trying for getting Project status report for the project created.
The error I am getting is :
"WebDynpro Exception: ADS: Request start time: Thu Aug 21 16:53:27 GMT+03:00 2008(200,101). "
In customizing for cProjects I have used the std. form available for the same, activated the same for the project type and when tried to get the report I got the above mentioned error.
Then in se38 I executed the programme FP_TEST_IA_01 the result was :
ADS: Request start time: Thu Aug 21 17:23:42 GMT+03:00 2008(200,101)
Also I have activated the following services
SICF->Services->default_host->sap->bc->fp and fpads, both are active.
But still I am not getting project status report from cProjects.
Please guide me what else should I do to get the project status report?
Thanks and Regards,
Niraj Sikligar

Hi Reema,
Its great to hear from you.
I have run the report : FP_PDF_TEST_00
Out put is :
Version Information: 705.20060620101936.310918
What does that mean ?
Secondly,
I have checked RFC destination for ADS the results were as shown below:
On Technical Settings tab page :
target host: ides
Path prefix: /AdobeDocumentServices/Config?style=rpc
Is this OK?
Is there anything else to be done?
Regards,
Niraj Sikligar

Status Profile: Multiple Active Statuses

I have created a status profile through BS02 and assigned to a couple of Sales Document Types.
After implementing, I have found that there can be multiple active statuses. This is not a desired result.
1. Is there a way to control the profile, so that only one status CAN be active?
2. Is there a way to "fix" the orders which currently have multiple statuses?
Thanks.

Hi Tom,
after creating status u need to assign status to sales document.the particular status work for that sales document only.Go to VOV8 in transaction flow tab u enter ur status at status profile field and save the document.
Please do check the status how u maitained Ex.for qotation bolck,order block,delivery block... assign appropriate status to the sales document.
Hope this may solve ur issue.
Regards,
Reddyy

Conditional Display in Report Template

Hello!
This is a BI Publisher / Apex question but I'm not sure which forum my question should fall under...thought I'd try this one first. Let me know if I guessed wrong. :)
I have created a report template (Word) and a report query in Apex. Everything works great (meaning the data is displayed as it should), but I can't figure out how to display a header/footer based on a user's response. On my search form, the user selects Yes or No if they want/don't want a header/footer printed on the report. The header/footer is predefined in the main database table, but it's not a field in my report query. How do I incorporate this into my template? It's been a while since I created a template in Apex but I don't think I've come across this issue before.
Any ideas?
Thank you,
Tammy

After a week off, I'm back to tackling this issue. I successfully created a sub-template and it works, except when I try to call the report via APEX. I've searched the forums and came across the "disable external references" set to False, but I'm using the standalone version of BI Publisher so I don't have that option. Is there a similar approach via the standalone version?
Thank you!
Edited by: 73pixieGirl on Feb 15, 2010 9:15 AM

Copy/Edit default Report templates

Hi,
I am given the following template options in the "Report Template" list on the Report Attribute page
of a report region:
default: HTML (standard)
default: Look 1
default: Look 2
default: Look 3
default: Look 4
default: vertical report, look 1 (exclude null columns)
I want to modify the vertical report template, so I tried to make a local copy of it using the "Templates" page in the "Build" Menu.
I used the "Create/copy" button of the "Report Templates" region, and then "Choose one from the HTML DB repository", and I am only shown these 2 templates:
Alternating Rows
Alt Rows,Navy Gray
Where can I find the default templates such that I can make modifications?

Hello,
It sounds like you want to write your own HTML thats what modifing tempaltes entails beyond that I agree having those templates avaiable would make your job easier.
But at the moment you have no way to get at the default templates. I'll see what i can do about getting an application in HTML DB Studio that has the default templates as report templates so you copy the report templates to your app.
If you have HTML DB 1.6 there are a large amount of examples and reports in the different themes you can try as well.
Carl

System status APNG is active

Hi,
I have created one process order but while realsing it system gives error.
"System status APNG is active".
and while creating this order system gives error
Master recipe XXXXXXX xx has not been approved
why these errors are coming and and how to solve.
As far for realsing the order i have tried with option individual approval but No authorization for that
Please let me know the slouation,
thank you,
Sakshi

Hello Sakshi,
Please go through below document for detail knowledge of Creating and releasing Process order step by step.
Creating and Releasing Process Orders - SAP Pharmaceuticals - SAP Library
I hope this document helpful to you for this issue,,
Thanks & Regards
Umesh Mali

'Project Status Report' activation in cProjects

Hi,
I was trying to configure the Status Reports in cProjects. I have completed creation of the form (chose DPR_PROJECT), activated the templates for the relevant Project type and also implemented the Badi with the correct form name. I am still unable to see any template dropdown in the application (cProjects). The DPR_Project template should appear in the same for me to create the Status Report. Please advice.
Thanks,
Sachin

Hi Sachin ,
I think, it may be a ADS installation issue.
The configuration of ADS server is somehow not very easy, as I saw so many installations problems with status report in cProj. 4.0.
Would you please check the following notes:
900310 & 992492 .
And the following reports may be helpful to check the setting:
FP_PDF_TEST_00 (returns version number of ADS)
FP_TEST_00 (creates a test PDF)
FP_EXAMPLE_01 (creates a test PDF using SFLIGHT data)
FP_TEST_IA_01 (creates an interactive PDF that can be signed via certificate)
FP_PDF_TEST_12 (returns signatures of a signed PDF  requires secure (SSL) ADS connection  ADS_HTTPS)
Kind regards,
Zhenbo

Status report template activation and assignment

Similar Messages

Maybe you are looking for