STDO: Log  could not be written on output device T

During the import of a transport to our qas system I see in the job log of RDDEXECL  several (50+) lines like this:
STDO: Log  could not be written on output device T
At the end it dumps:
RAISE_EXCEPTION
Exception condition "INVALID_TYPE" raised.
Any ideas?
-AD

Hi,
We had similar error earlier , and problem was BW system was running out of space.
Check table spaces in transaction code DB02 and if required ask basis guys to extend it . This solved our problem and hopefully will solve yours too.
Hope that helps.
Regards
Mr Kapadia
Assigning points is the way to say thanks in SDN.

Similar Messages

  • Transport Error 12:STDO: Log  could not be written on output device T

    Hi,
    I am trying to Import a transport request from D to T..
    Error 12
    Program terminated (job: RDDEXECL)
    All DB buffers of application server fgukcbpbbp001 were synchronized
    STDO: Log  could not be written on output device T                  
    How shall i proceed and

    Hi,
    Refer
    STDO:LOG COULD NOT BE WRITTEN ON OUTPUT DEVICE:T
    ODS Activation Error
    STDO: Log  could not be written on output device T
    /thread/146627 [original link is broken]
    BI Content Installation and Activation Job Error
    ODS Error
    Problem when activating ods object
    Hope this helps.
    Thanks,
    JituK

  • Transport Error:could not be written on output device T

    Hi,
      I transport ODS/CUBE/Transformation to QAS of BW. Error information:
       Program terminated (job: RDDEXECL, no.: 16525500)
          See job log
       Execution of programs after import (XPRA)
       End date and time : 20071217165645
       Ended with return code:  ===> 12 <===
    Click "See job log" display these information:
    Job started
    Step 001 started (program RDDEXECL, variant , user ID DDIC)
    All DB buffers of application server janapbq1 were synchronized
    STDO: Log  could not be written on output device T
    Replication completed successfully
    InfoSource 8ZSFE_O21 was successfully created
    Communication Structure /BIC/CS8ZSFE_O21 activated
    Transfer Rule(s) 8ZSFE_O21_AA activated
    STDO: Log  could not be written on output device T
    STDO: Log  could not be written on output device T
    STDO: Log  could not be written on output device T
    STDO: Log  could not be written on output device T
    STDO: Log  could not be written on output device T
    STDO: Log  could not be written on output device T
    STDO: Log  could not be written on output device T
    STDO: Log  could not be written on output device T
    STDO: Log  could not be written on output device T
    Replication completed successfully
    InfoSource 8ZSFE_O33 was successfully created
    Communication Structure /BIC/CS8ZSFE_O33 activated
    Transfer Rule(s) 8ZSFE_O33_AA activated
    ABAP/4 processor: OBJECTS_OBJREF_NOT_ASSIGNED
    Job cancelled
    My BI System information:
    SAP_ABA                     700                     0013
    SAP_BASIS     700                     0013
    PI_BASIS                    2005_1_700     0013
    ST-PI                    2005_1_700     0003
    SAP_BW                    700                     0015
    FINBASIS                    600                     0005
    SEM-BW                    600                     0005
    BI_CONT                   703                     0004
    ST-A/PI                   01I_BCO700     0000
    This is urgent..
    Any Thoughts.....
    Thanks.

    Hi,
    Once again try to activate all the object and retry the transport, this is due to inactive object or object not properly activate.
    since nothing is mentioned activate all object incluging data target and transformation also.
    if this success don't forget to assign points
    Thanks,
    Ravi - IM
    Edited by: Ravi Kumar P S on Dec 18, 2007 5:37 AM

  • Help! Getting error "The file could not be written" when exporting

    When I attempt to export a group of approximately 50 photos from LR4, a window opens at the end of the process saying "The file could not be written" along with a list of approximately 10-15 NEF file names.  I have never had a problem exporting before, but I recently started storing my LR catalog and files on an external USB 3.0 drive.  I'm looking for any suggestions!
    Here are the details:
    LR4 with latest updates
    Win 7 with latest updates
    LR catalog and photo files stored on external USB 3.0 G: drive
    Trying to export to a folder on my desktop on C: drive (46GB free out of 134GB, solid state drive)
    LR files are NEF, exported files are JPG
    I've tried to export to the same group of photos multiple times with different names and different output file sizes (8MB, 5MB, 2MB).  Each time the list of failures is different.
    Some of the thumbnails which appear in Windows Explorer are corrupted (part of the thumbnail is gray)
    When I try to export the same group of photos to the external USB 3.0, it works perfectly!
    Here is an example of one of the LR log files:
    The file could not be written. (17)
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1915.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1918.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1919.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1939.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1948.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1958.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1961.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1964.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1968.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1971.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1972.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1973.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1978.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1983.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1986.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1989.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1990.NEF

    http://forums.adobe.com/community/search.jspa?peopleEnabled=true&userID=&spotlight=false&c ontainerType=14&container=3316&rankBy=date&q=%22file+could+not+be+written%22

  • Firefox does not open at all - error message when loading firefox 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program in English

    I cannot open firefox at all. I have removed and re-installed but it has made no differenct. I just get an error message when loading firefox - as follows - 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program.
    Can anyone help me sort this out? If I log in as someone else Firefox works?
    == This happened ==
    Every time Firefox opened
    == the computer shut down unexpectedly ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    You can o a malware check with a few malware scan programs.<br />
    You need to use all programs because each detects different malware.<br />
    Make sure that you update each program to get the latest version of the database before doing a scan.<br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

  • Import Wizard fails to export - object could not be written in the ids-file

    Hello,
    the complete export of the BO environment into a biar-file with the import wizard fails. In the wizard's dialog every option is choosen as "all". When the export is started it stops already in the folder objects. The log file says the object allocation could not be written in the ids-file. So I presume a problem with references.
    In order to figure out which object is responsible for the error I varied the export and finally identified the "repository objects" as the the responsible type of objects. When I now run the export and only use the needed repository objects it works fine.
    But I don't know, if export is complete (I presume it).
    Has anyone a idea what the reason can be for this problem? Can it be fixed in the database? This kind of export did work fine the week before.
    thanks, matthias

    Could you quote the entire error message, word-for-word, verbatim? What Import settings are you using ... Copy, Move, Add?
    Most likely you have a permissions issue, but it will be much more clear to me if I can see the entire message.

  • Error "The file could not be written"

    Hi!
    'm tyring to export some pictures in lightroon but I receive the error "The file could not be written".
    Any suggestion?
    Thanks

    Make sure you have permission to write to the output folder and that there is enough space on the disk.
    What OS are you running?   What version of Lightroom?
    Hal

  • 'file could not be written due to an error' when exporting jpg

    I'm working with an Illustrator file in CS2 and after a certain point it has started saying 'the file could not be written due to an error' when exporting to a jpg.
    i've tried a couple things like deleting layers and although the file is much smaller, it still says the same error when exporting.
    at its highest it was 130mb as an illustrator file and jpgs were 2-5mb.
    i''ve tried copying some of the layers into a new file but the error report still comes when i'm exporting.
    i have vector and raster based data in the file and tried turning off/deleting either of the layers and there is no difference.
    i don't understand why it's started doing this because before it had no problem at all exporting before.
    ANY IDEAS ANYONE?  I'm trying not to have to reproduce days of work to remake the file.
    many thanks,
    P

    Mylenium,
    Sounds like you know a good deal about this product.  Is there any way to restore a color profile/setting to an earlier point?
    I don't recall changing it and to tell you the truth, wouldn't be able to say which it may have been set to before - if different.
    Thanks,
    Paul

  • Error message the disk could not be written to or read from.

    Every time I try to synchronize my shuffle,I get the message that attempting to (I forget what it said exactly) failed, the disk could not be written to or read from.
    To synchronize it I have to reset the shuffle using the reset utility and then only it synchronizes automatically(for the first time only and not again).
    Is there a way to resolve this?
    Thanks a lot for any help.

    I get the same thing. I bought 2 of them today and both are now doing the same thing.
    When I first hook it up it asks me to name it then if I want it to grab music from my itunes. If I say yes it does and shows the songs in iTunes. All works good. The problem comes in when I try to remove a song or change them. That's when I get the error.
    If I reset using the ipod reset utility it blanks it out, has me name it, then asks if I want it to pull music from iTunes automatically. If I say no then it appears blank on my iTunes. Which it should. I then try to drag a music file over or hit autofill and it waits a while then says the same error message. It shows the music in my shuffle until I disconnect it. Once I re-connect it then it shows blank again.
    So right now the only way I can get music on it is to use the reset utility. Name the Shuffle again. Have it automatically grab the music from iTunes...and can then never edit the music.
    I am using iTunes 7.1.1.5

  • RWRBE60.EXE - Application Error. The memory could not be written - URGENT !

    Hi,
    We are getting the error "RWRBE60.EXE - Application Error. The memory could not be written" in two of the 5 machines. That too, this error is encountered only some times and not always.
    Scenario: The report builder generates the .PDF file and places it in the network path. The report is called from the forms 6i. We are using the Report Builder - 6.0.8.20.1.
    This error is encountered in only 2 machines but not always.
    It's a critical release issue. Could any let us know the possible solution?
    Thanks,
    Uma

    Thanks. We can not re-install the report builder now. How do I check whether memory is sufficient or not?

  • Why on close am I geting " firefox.exe -Application error - The memory could not be "written" "?

    Why on close am I geting " firefox.exe -Application error "The instruction at "0x00000000" reference menory at "0x00000000". The memory could not be "written" Click OK to terminate."?
    This is on Window XP
    A program White Smoke was loaded into this unit about 3 month ago and a popup to buy started appearing 1 week ago. I unistalled the program and i found virus that was removed.
    The unit will not allow a system restore also.

    You do not need to start Firefox to disable the Java Quick Starter, you can do that via the Java Control Panel (Control Panel > Java > Advanced)
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • TS1424 Has anyone encountered trouble transferring rented films to their iPhone? I get error message "iTunes could not copy [film name]  to the iPhone because the file could not be written"

    I have dowloaded a film to rent. Downloads to iTunes without problem. However it does not transfer to my iPhone.
    At first it appeared on iTunes as though it should be on my phone (it definately wasn't).
    Apple Support sent me film to download again.
    Tried to transfer it again tonight and the error message I get is: "iTunes could not copy [film title]Spy to the iPhone because the file could not be written"
    Can anyone help ASAP

    Two possibilities come to mind.
    Check your source hard drive for errors, right-click on the drive holding the library, click Properties, tools, check for errors, scan for and attempt recovery of bad sectors...
    Or...
    Repair Security Permissions
    Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and SYSTEM full control of this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but Windows 7 shouldn't be too different.
    If it won't let you change the permissions use the Owner tab to take ownership from an account with administrator privileges.
    tt2

  • ITunes could not copy ''file'' because the file could not be written

    Recently, I have been experiencing some problems with iTunes and my iPad 2. Whenever I try to sync movies into my iPad, I get the error message ''iTunes could not copy ''file'' because the file could not be written''. This message always appears whenever I try to sync a few movies at once. When I check my iPad after it's synced, I find that a few of my movies successfully sync into my iPad, and can be played. However, some movies show up on my iPad but cannot be played. The video thumbnail just shows a picture of a blank TV screen. Is there any way where I can fix this problem? Thanks.

    Hi JimmySlax.
    I was having the same issue with music and movies but it had been ok before. The sync would freeze on a random file and then i had to take out the USB cable to clear it. After trying all sorts of things i saw someone mentioning about Anti virus and firewalls. I am using McAfee so i disabled it as a test. After this i could sync music and movies without issue!!!!! So in my case the firewall/anti virus was causing a problem. McAfee updates itself a lot so I am guessing something has happened in a recent update that impacted iTunes.I am not sure if this kind of thing is also causing your problem but it sounds very familiar.
    Hope this helps.

  • HP scanning error: "An error has occurred saving the file because it could not be written to..

     HP scanning error: “An error has occurred saving the file because it could not be written to.  Check the properties for the file to make sure it is not read-only.” Dr. Google finds others with this problem.  Some claim that this is caused by an upgrade of Apple OS10 (which I did do).  One claims that HP has a "patch" for this problem. If I try to quit HP scan, it won't quit and freezes my computer. Here's the odd thing.  I have no problem scanning in a colored page from Scientific American either before or after this error (after rebooting each time), but simple black and white documents started just today to give the error message above.

    Thank you for the link however if I understood all of the instructions I would still be reluctant to try this on my own especially from a third unknown party where some of the information may be wrong and/or lost in translation. (Google translation at the end of this comment). The instructions say to uninstall the software.  So if I uninstall the original HP software am I using the original disk to reinstall and then personalize again?What about all of the updates since I originally installed the software? I found the Disk Utility but what is "gatekeeper"And I am using OS X 10.9.1 that is current because I downloaded the latest upgrade.  How would I reinstall it?And at what point do I go to the URL for the software drivers and the patch? This is just not practical for someone who is not proficient in troubleshooting applications.I switched to Apple because I don't want to have to go through this kind of process, take my time to fix the application and potentially mess up my system .  WHy should I have to try to figure out how to retrieve the normal function in this case, of my All-In-One. If it is so simple why can't HP develop the fix and make it available? Unfortunately right now I have to find an alternative to scan some important business documents that are due today. Since I am using an older printer by technology standards even though it is working fine I may be looking for a replacement and HP may no longer be at the top of my list given that the problem appears to affect other HP models. No need to answer my questions,  I'm not going to try this fix based on these instructions. Please HP provide a fix for this problem with the scanner and MAC OS X 10.9.1 compatibility! Translation of the information on the suggested link: We hereby send you a guide that should help you in solving the problem .Please carry the following: 1 Please uninstall the software again .Goto -> Programs - > Hewlett -Packard - > HP Uninstaller 2 Please repair permissions on your Mac .Go -> Utilities -> Disk Utility - > Repair Disk Permissions . 3 Please disable ' gatekeeper ' on your Mac . 4 Reinstall the full software for MAC 10.6 and patch for 10.7 / 10.8 / 10.9. HP Scanjet Software and Drivers for Mac OS X v10.6 features :http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/ ? sp4ts.oid = 457 534 & spf_p.tpst = swdMain & spf_p.prp_swdMain = wsrp - navigationalState 3Di % dx % 253D % 257CswItem % 253Dsj_78355_5 % 257CswEnvOID % 253D219 % 257CitemLocale % 253D % 253D % % 257Cs wLang 257Cmode % 253D % 257Caction % 253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken
    Scanjet software patch to Use OS X 10.6 Software and Driver on OS X:http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/ ? sp4ts.oid = 457 534 & spf_p.tpst = swdMain & spf_p.prp_swdMain = wsrp - navigationalState 3Di % dx % 253D % 257CswItem % 253Dcs_97791_1 % 257CswEnvOID % 253D219 % 257CitemLocale % 253D % 253D % % 257Cs wLang 257Cmode % 253D % 257Caction % 253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken    

  • This is an error from my HP scanner. How can I fix the problem? An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

    I recently uploaded the Maverick operating system. I wanted to scan some things on my HP Printer/Scanner and could not . This is the error message I received: An  error has occurred saving the file because it could not be written to.   Check the properties for the file to make sure it is not read-only. I am a novice with the computer and have no one to help. I hope someone knows an easy fix.
    Thank you

    This worked for me:
    "Although it is not a 'fix' for the HP issue, I did find a workaround that helped me. In the Preferences Panel in MacOS X you can pull up the Printer/Scanner preferences and scan directly from OS X. I'd not known of this prior to posting here and it worked like a charm."
    "Of course, HP should still update their software, but it's good to know that Apple has it covered for them."
    I found it here:
    http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/MAVERICKS-WONT-SCAN-HP-C3 09A/td-p/3052105

Maybe you are looking for