Step-By-Step Decom Process Post O365 Migration.

Hello Geeks,
We have successfully Migrated to Office 365.
But still have Exchange 2007 & 2010 servers on-premises.
Would like to know the procedure to Uninstall them and also would like to manage them from AD.
So looking forward for information on:
1. Cutover process,
2. Dependencies need to be checked
3. crusial things need to be taken care of.
Thanks,
Prashant

Hi,
After you’ve verified that all email is being routed directly to the Exchange Online mailboxes, have completed the migration, you can uninstall Exchange from your servers and remove your on-premises Exchange organization.
How to Remove an Exchange 2007 Organization
http://technet.microsoft.com/en-us/library/aa998313(EXCHG.80).aspx
Modify or Remove Exchange 2010
http://technet.microsoft.com/library/ee332361(EXCHG.141).aspx
Here is an article about decommission on-premises Exchange servers, please refer to the Step 7 under the "How do you do this?" section in the following article.
Migrate all mailboxes to Exchange Online with a cutover migration
http://technet.microsoft.com/en-GB/library/jj874016(v=exchg.150).aspx
Best regards,
Belinda Ma
TechNet Community Support

Similar Messages

Synchronous Send step showing errors in process designer

Hi All,
I have few questions in using a synchronous send step in
BPM.
Can I use a synchronous send step without opening Sync/async bridge.
When is the sync/async bridge opened?
Scenario:
File async --> XI (receive async) --> sync send step to J2ee application (HTTP post) --> async response send to File
Sync Abstract Interface:
Input:
Message type (same as outbound)
Response:
Message type (same as Http response)
When I use the synchronous step, I see errors in the process designer saying
Message to be sent and synchronous interface are not of the same type. This happens for both request and response message.
Please help me.
Regards,
Meher

I think the Problem is with the INTERFACE Determination.
You need a BPM for the above scenario, but not a Sync/Asynch Brindge
In BPM
Step 1 : Receive from File 1
Step 2 : Do Transformation from File1 format to J2EE Request Format
Step 3 : Send a Synchronous send Step to J2EE
Step 4 : Transform the HTTP response to your File2 Format Response
Step 5 : Send the Response to File2
Interface Determination
File1 to j2ee Request
J2ee Request/Response To J2EE Request/Response
J2ee Response to file 2
Please check your Interface determination very closely.

Step by Step method to create a process chain in SAP BI

HI There,
I'm new to SAP BI, can anyone pleas explain me why we need to use Process Chains in a simpler way?
Also it would be great if someone can give me step by step description for creating process chain. I've seen couple of PDF files but they confusing me more then clearing my doubts. Appreciate your time and thanks in advance.
Vandana
Please search the forum before posting a thread
Edited by: Pravender on May 4, 2011 3:57 PM

Hi Vandana,
1.Go to RSPC tcode ->(F5) create ->It will ask for process chain name ->then it will ask for start variant
2.If you have no start variant pre created then create new one (at right side there will be a paper symbol for that ).Every process chain has one and only one start variant that is to set scheduling option etc .When you will create a new one you will go to a screen where you have scheduling option .
3.a) Direct scheduling ->to start execution immediately
b) start using meta chain or API ->chains which run at specific time (day ,month etc or after some specific event ). save your settings and go back .click check symbol for final creation of start variant.
4.Now at left screen you have chain symbol (process types) .when you will click on that you will have all the process lists .
5.You can select process as per your requirement and connect different processes together.Each process is a different event (ex : load DTP ,Infopackage ,ABAP program ,AND ,Interrupt ).You cna do detailed study for that .
6.After adding all processes activate (ctrl+F3) and execute .
7.After that you can check logs (shift+F1) .you can see todays log ,yesterday and today etc .For details of every process execution right click on process and see display variant .
Hope this will be helpful for basic startup.you can further read thoroughly on each process .
Regards,
Jaya

MDM Data Manager step-by-step process with an example

Hi All,
I recently started reading MDM. I am clear with MDM-Console concepts. But I have problem with MDM Data Manager. I am confused with data entries in qualified tables, work flows(using microsoft studio), Matching mode- rules(High treshold, low threshold) etc.. I read material posted in forums- but still I am not clear.
I need a step-by-step process for data entries with *examples*. A good example which covers all Data Manager concepts. PDF's with screen shots, videos any thing would help.
Please help me......It would be of great help.
Thanks in Advance.
Suchir

Hi Suchir ,
MDM 5.5 has 4 MDM clients to perform 4 main functionality on the MDM master records.
- Console- This is where all the Administrative work is performed
- Data Manager- This is where the actual maintainence work is done on the master data like consolidation deduplication etc.
- Import manager- Thsi is from where the source matser records are taken into MDM repoistory
- Syndicator- This is from where teh consolidated master data is send back to the target systems.
MDM Data Manager is the heart of MDM
The activities that can be performed in the MDM Data manager are:
- Data Consolidation
- Data Validation
- Data Deduplication
- Data Assignment
- Data Governanace
etc......
Qualified Table:
- Qulaified tables are used to store relational records where one field value is determining the other field or fields value.
- Qualified tables are maintained in Console and can be viewed in Data Manager
- Qualified Table are viewed under a separate section in Data Manager in the right hand side.
- Qualified table has Non qualifiers and Qualifiers.
- Non qualifiers can be seen in the Qualified table and in the linking Qualified field
- Qualifiers can be seen separately under the Qualified section in the data manager
Kindly refer the below link to know more on this:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a15239-684e-2b10-b8ae-b936b7d1c1fe
Workflows
- Workflows are designed in MDM for Governanace
- You can create the MDM workflow using the MS Visio 2003 stencils in the MDM Data manager in the record mode under the workflow table
- The saved workflow in DM can then be executed either mnaully or automatically based on teh trigger actions
- The trigger action for teh MDM wf are record Add,Update,Import,Manual
Kindly refer the below link to know more on this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60559952-ff62-2910-49a5-b4fb8e94f167 (MDM Workflows Overview)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90990743-91c0-2a10-fd8f-fad371c7ee40 (Demo of MDM Workflows)
Matching Mode
- This mode is exclusively for Master data deduplication
- We need to create Rules,Strategies,Transformation in MDM data manager in teh record mode
- Then you need to run these strategies on the selected records
- Based on your score and threshold set in the strategy MDM will identify duplicate records
- This score will be seen in teh Matching mode
- Colour coding is used along with scores to find out dupliactes
- Green - 100%dupliacte Blue- 50?% Red- No duplicate
Kindly refer the below link to know more on this:
/people/michael.reil/blog/2006/05/18/mdm-matching-strategies-for-master-data-consolidation (matching merging in mdm)
Hope It Helped
Thanks & Regards
Simona Pinto

How can I print from my ipad2 to my HP Laser Jet M1212MFP? Please, a simple step-by-step process.

How can I print from my ipad2 to my HP Laser Jet M1212MFP? Please, a simple step-by-step process. Many thanks.

Hello Tatiner,
Thanks for the post. With this one, we have a couple of options. I've included a set of links below with some excellent information and step by step instructions so that you can print from your iPad. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03119917&cc=us&dlc=en&lc=en &product=3965849&tmp_track_link=ot_search
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02623193&tmp_task=useCatego ry&cc=us&dlc=en&lang=en&lc=en&product=3965849
I work for HP but my posts and replies are my own....Thank you!

We're running Windows server 2003 32bit and want to migrate to Windows server 2012R2 64bit, can someone provide a step by step procedure on how to migrate instances on ADAM to AD LDS?

I have no experience in dealing with servers, but my senior has asked me to investigate on how to migrate instances on ADAM (windows server 2003 32bit) to AD LDS (Windows server 2012R2 64 bit) as in place upgrade is not an option as we're running a 32bit
Server and want to migrate to a 64bit Server. can someone please give me a Walkthrough on how to do this.
Thanks in advance.

Hi,
it'd be of great help if you could give me a step by step process of replication.
There is no step-by-step article/guide of replication process, replication between AD LDS instances of the same configuration set is an automatic process.
All we need to make sure is to create a replica of the existing instance, and there is no network/security obstacle preventing the replication.
Please note that we need to install AD LDS from Server manager on Windows Server 2012 and 2012 R2.
More information for you:
Understanding AD LDS Replication and Configuration Sets
http://technet.microsoft.com/en-us/library/cc770465.aspx
Best Regards,
Amy

I need Drill through creation step by step process in the BPC NW7.5

Hi,
I am doing SAP BPC Migration project.
In this I want to create Drill throughs as usal in the MS version.
I need step by step process to do this,Could you please help me in this as early as possible.
Thanks and Regards
Krishna

and what's a firewire port? how do i know if i have one?

Step by step guide of migration assistant

Hi,
I have an old MBP which crashed recently (due to some reason which is not important here). The hard disk survived though. I have ordered a new MBP. Now I have put the hard disk in a USB case. And I understand that I can plug in the hard disk to my new MBP and migrate the content to the new MBP. But I'd
like to understand what & how exactly the content is migrated. I want to migrate the content selectively. Is there any step by step guide providing the details?
Thanks.

Migration Assistant does not perform selective file transfers. You can restore your entire Home folder, third-party applications and support files, and system settings. If you wish a more selective process, then you would need to restore your files manually or you can use a third-party backup utility such as Carbon Copy Cloner 3.5.1.

Step by step process for transportation , shipping

Hi SAP GURUS,
Anybody pls send me that 'step by step process for transportation and shipping ' wt r all the process steps has to be happend .
pls explain me for both OUT BOUND ,INBOUND Process .
Thanks in advance,
Neha.R

Hi there,
Pls donot post this kind of generic questions. There are many web sites explaining you the process in SAP SD.
This is not a 1 step or 1 paragraph solution to explain step - step solution in transportation & shipping.
Pls refer http://help.sap.com/erp2005_ehp_03/helpdata/EN/38/c1853488601e33e10000009b38f83b/frameset.htm for shipping &
http://help.sap.com/erp2005_ehp_03/helpdata/EN/d5/2285347860ea35e10000009b38f83b/frameset.htm for transportation.
After going thourgh the material then think if it would be possible to post all that information that in the reply.
Regards,
Sivanand

Step by step process of DSO

hy!! BI Experts!!!!!!!!!!!!!!!
im started learning SAP BI .
iwant to know the step by step process of DSO and info cube
for both the data targets want clear procedure.
Thanks & Regards..........
Ravi...........
Please search the forum/sdn before posting a thread. Also do a spell check.
Edited by: Pravender on May 28, 2010 12:20 PM

Hi,
DSO: Is having Over write functionality and used to store the detailed level of information, Two Dimensional Structure.
A DataStore object serves as a storage location for consolidated and cleansed transaction data or master data on a document (atomic) level.
This data can be evaluated using a BEx query.
A DataStore object contains key fields (such as document number, document item) and data fields that, in addition to key figures, can also contain character fields (such as order status, customer). The data from a DataStore object can be updated with a delta update into InfoCubes (standard) and/or other DataStore objects or master data tables (attributes or texts) in the same system or across different systems.
Unlike multidimensional data storage using InfoCubes, the data in DataStore objects is stored in transparent, flat database tables. The system does not create fact tables or dimension tables.
Cube: Is additive functionality and Multidimensional Structure.
An InfoCube describes (from an analysis point of view) a self-contained dataset, for example, for a business-orientated area. You analyze this dataset in a BEx query.
An InfoCube is a set of relational tables arranged according to the star schema: A large fact table in the middle surrounded by several dimension tables.
Use
InfoCubes are filled with data from one or more InfoSources or other InfoProviders. They are available as InfoProviders for analysis and reporting purposes.
http://help.sap.com/saphelp_nw2004s/helpdata/en/8d/2b4e3cb7f4d83ee10000000a114084/frameset.htm
The details you can see in the SAP Help.
http://help.sap.com/saphelp_nw2004s/helpdata/en/f9/45503c242b4a67e10000000a114084/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/46/8d0028ebf268e5e10000000a1553f7/frameset.htm
Thanks
Reddy

Step by step process takes place in QM

hi gurus
could u please let me know the step by step process that takes place in quality management module.Not as per the real time scenario just for the training purpose.

Hi Naveen,
I`m fwdg the steps of QM cycle in Procurement and Source Inspection
Scenario: You need to inspect raw material received from the vendor at plant premises.
Basic Settings needed in IMG (PRIOR) : Control Key for QM in Prcmt
                                                   Certificate Type
Master data needed : Material Master (ROH)
                       Master Insp. Characteristics
                       Inspection Plan
Steps :
1.     MM01 : Create Raw material
In QM View in Material Master :
Give Certificate type. QM Control Key and ensure QM Proc. active
Click Insp. setup
Assign insp. Type 01 GR Insp. for order, by selecting new insp. Types.
                                      Ensure it as active plan, by ticking the active indicator.
2.     Goto QS21 , create Master Inspection characteristic
Give Status as Released and Complete copy model for mic
Select Quantitative characteristics and tick the relevant indicators i.e., in this case Lower specific limit, Upper specific limit and Check Target value.
Press Enter
It`ll prompt you for entering lower, upper and target values for the MIC ,
Enter the values.
SAVE
3.     GOTO QP01 Create Inspection Plan with status Released (4) and Usage GR (5)
-     Click operations, Create Insp. Operation and give the control key as QM01
                       - Select the inspection operation and click on the insp. Characteristics,
                           assign the MIC you`ve created and press enter. All the characteristics
                           will be copied.
SAVE
4.     GOTO ME21N Create Purchase Order
5.     GOTO ME28 or ME29N Release Purchase Order with both 1 & 2 Status
6.     GOTO MIGO GR for Purchase order
                           Check in where tab : give storage location
                           Check in Purch.order details tab : Give certificate enclosed status: YES
                               Ensure item ok indicator is ticked
                               Post (SAVE)
Now the inspection lot gets generated as you post the goods.
7.     GOTO MMBE You can observe that the stock is moved to Insp. Stock automatically
8.     GOTO QA32 Inspection lot selection
Give Material and Plant Execute
Select your inspection lot line, and select result recording.
{Incase, if it is not allowed to record results, GOTO QE02, give insp. Lot and select Change Insp. Lot Icon, give the relevant task list usage and press TASK LIST button in the Inspection specification Tab and then SAVE}
Give inspected quantity and target value that is checked
SAVE
You can find in QA32, that the status is changed to INSPECTED
Now again select the insp. Lot in QA32 and goto Usage decision,
Give UD as A for accept and Quantity to be moved to unrestricted use stock
SAVE
REFRESH
9.     GOTO MMBE
Now you can observe that the stock has moved to Unrestricted use
Source Inspection Steps :
ME41- CREATE REQUEST FOR QUOTATION
ME9A-MESSAGE OUTPUT (REGD. QUAL. AGREEMENTS, TECH. DELY. TERMS. ETC.)
ME21N-CREATE PURCHASE ORDER
ME9F-MESSAGE OUTPUT ( REGD., PURCHASE ORDER)
QI07-WORKLIST OF SOURCE INSPECTION
QA11-UD FOR SOURCE INSPECTION
MIGO-GR
MIRO-CREATE INVOICE
MRBR-RELEASE INVOICE
QC55-CERTIFICATE PROCESSING
QF11-DEFECT RECORDING
QA11-UD FOR GR
QA12-INCASE TO CHANGE QUALITY SCORE
QA13-TO CHECK HISTORY CHANGES
Reward if useful and close the thread.

X201t Factory reset step by step process.

HI,
I want to know the step by step processs for factory resetting Lenovo x201t. I Think i can do this with out cd & drivers with the help of recovery files stored in system.
Solved!
Go to Solution.

Dear Customer
Welcome in lenovo forums
Please follow the below steps to processed the recovery :-
1- Shut down the machine and connect the charger
2- Power on the machine and hold the blue ThingVantage button tell you can see a loading massage says that Windows is loading file .
3- Then you will find another massage to confirm the recovery process so you just need to hit Yes
4- Next step select System recovery and the recovery will start loading
Please check and let me know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How to migrate from exchange 2007 to 2013 step by step tutorials please

Hi
I am running Windows Server 2008 standard, with exchange 2007 SP2 on it.
We have 800 mailbox in total
Our domain controllers are
Win2012 R2 and I would like to upgrade to Exchange 2013 on Windows server 2012 R2.
I am running a VM, on VMware environment, so my Windows 2012 R2 is a VM.
Is there a website or document that explains in detail, step by step how to upgrade from 2007 to 2013.
I currently only have 1 exchange server 2007, with all the roles on the one server. I would like to keep that same as
well with exchange 2013.
Thanks

Exchange server deployment assistant is always a good service provider to achieve this task as it simply ask few questions about your current environment and proceed further accordingly.
You can refer to this blog explained by technet team that will assist you further to gather more information in depth : http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
Moreover, to avoid the interruptions and proceed a hassle-free migration from exchange 2007 to 2013, this application (http://www.exchangemigrationtool.com/) could also be a good approach to accomplish
migration task in more secure way.

I have a canon hf10 and need to be able to transfer my video from my camera to my computer so I can burn them to dvd is there a step by step process? i'm new 2 the mac world. I tried downloading imovie 7.1.2 but it said, "An eligible iMovie application

i have a canon hf10 and need to be able to transfer my video from my camera to my computer so I can burn them to dvd is there a step by step process? i'm new 2 the mac world. I tried downloading imovie 7.1.2 but it said, "An eligible iMovie application was not found in the location /Applications." can anyone give me step by step instructions? i would hate to call the geek squad!!!LOL

and what's a firewire port? how do i know if i have one?

Help wanted - step by step process on how to use two ipods on one computer

I'm just in the process of getting an ipod (waiting on delivery!) and want to know how it is possible to have two ipods using the same computer but synchronizing differently. I don't want to risk losing my partners music (he'll be very upset!) and I don't want to end up with his music on my ipod. I'd appreciate it if someone could give me a step by step guide or tell me where the best place to look for the answer is. Is it possible somehow to have two different libraries on one computer? Is that how it works?

There are a couple of methods for using more than one iPod on a single computer. Have a look at the article linked below. Method one is to have two Mac or Windows user accounts which by definition would give you two completely separate libraries. Method two as Chris has already described above is to set your preferences so each iPod is updated with only certain playlists within one library. Have a look anyway and see what you think and go for whichever you feel suits your needs best: How To Use Multiple iPods with One Computer

Step-By-Step Decom Process Post O365 Migration.

Similar Messages

Maybe you are looking for