Step Setting adapter

How can I change the Adapter type in the Step Settings for all of my sequence calls from the "NONE" to "CVI" type.
I have a large number of sequences and don't want to change each one individually.
Thanks
John
Solved!
Go to Solution.

I wish it was that easy. I am using a customer supplied program that created the sequence files, but each test is a separate sequence in the sequence file. So each test is listed as a sequence in the sequence pane. I am not able to change multiple steps by selecting muliple sequences. The attached screenshot might help.
Thanks
John
Attachments:
Capture.JPG ‏32 KB

Similar Messages

Setting Adapter-Specific Message Attributes in an Adapter Module

Hi!
I want to set Adapter-Specific Message Attributes in an Adapter Module. Is it possible to configure the Variable Transport Binding in this way?
Best regards,
Daniel

I'd like to know it as well.
I've checked out the XI AF API but didn't find much.
One thing that I've observed is that since Module API can treat any Message Class (not only XI Messages), I guess it won't have any specific methods for XI messages (hence, no dynamic configuration). But you could try to get the message object and then treat it as an XI Message (you would be doing the steps that the Java Mapping API do before it calls a Java Mapping class) to get the Map objects (which include the parameters).
Good luck on it, and let us know if you have any progress!
Regards,
Henrique.

How to set adapter specific message attributes on Pi 7.1 inside a Java map.

Hello,
how can I set adapter specific message attributes in a Java mapping on PI 7.1.? The TransformationInput grants access to the DynamicConfiguration but the TransformationOutput doesn't. I have found threads refering to the old way of implementing Java mappings (e.g. Get dynamic filename in a Java Mapping (NOT UDF)). But there doesn't seem to be one refering to the actual PI.
Kind regards,
Heiko

Using DynamicConfiguration from the TransformationInput works.

Setting adapter specific message attributes

hi xi guroos.
i just got one doubt in a file to file scenario.
if i set adapter specifec message attributes in sender file CC.
and if i enabled file name checkbox.
some xi prof saying that the file at recievr directory will get created with the same filename which we r using at source directory .
if this is the case then no need to create any UDF for getting same file name i n mapping and one more doubt is
then what is the use of typing filename at reciever file adapter.
u r anwer will be appreciated.
waiting for u.
bey.
regards.
seeta ram.

some xi prof saying that the file at recievr directory will get created with the same filename which we r using at source directory .
Its true.
if this is the case then no need to create any UDF for getting same file name i n mapping and one more doubt is
By marking the checkbox, at receiver u could have the same filename as that of sender. But this is the only requirement, UDF is not required.
However if u want the filename as a value in Message mapping, u need the UDF. And moreover, there r many more header parameters that could be accessed in UDF
then what is the use of typing filename at reciever file adapter.
If u doesnt tick the checkbox (in most of the cases), then XI should know with which name file should be created
Hope each doubt is cleared
[Reward if helpful]
Regards,
Prateek

Where is the Set Adapter Specific Attributes indicator on the comm channel?

I really think I must be losing it guys.
We are SP16, we went directly to SP16 from 9, so we skipped over SP14.
When I go into a communication channel and choose an adapter(File) for instance. I cannot find the Set adapter-specific message attributes indicator anywhere!
Someone please tell me where it is located! If possible please send a screenshot to [email protected]
Thanks,
chris

Hi,
did you reimport SAP BASIS component to IR ?
just like specified in question 3 (adapter section)
in the XI FAQ?
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Regards,
michal

Error : Input Definition 'Ground WIP' does not have a % Step set.

Input Definition 'Ground WIP' does not have a % Step set.
Why are we getting this error when the % Step has a percentage set? It will not allow us to save the spec.
Material
Qty
Material G/L
Moisture G/L
Solids G/L
Yld
% Step
EXT Cost
Ground WIP
Internal
1.00
1000.00
100.00
1000.00000 lb 1.00000 1.00000 1.00000 1000.00000 lb 100.00 --
Total
1000.00000 lb
1000.00000 lb

the user copied a formulation spec and entered a wip , then tried to save. it's like it wasn't recognizing the 100%. We didn't change tabs and try that, they endedup writing a new spec to get around it. We are not modifying and inputs programatically.
Another issue we saw this morning:
1, create a marinade in step 1
2 consume an FO in step 2
3 click consume from step - receive unhandled error
we found that if we put a percentage in on the FO un step 2 before clicking consume from step , it works fine. Can you guys cast a warning or error message instead of the unhandled?
thanks,
David
The description for Event ID '0' in Source 'Prodika' cannot be found. The local computer may not have the necessary registry information or message DLL files to display the message, or you may not have permission to access them. The following information is part of the event:'ErrorType: First| ErrorCount: 0| App: GSM| SessionId: 800f067b-7860-6de0-517f-ac4ac13c0f69| UserId: johnsong| IsNewSession: False| ServerID: 10.31.11.20| Misc: Spec 5329214-001 ; Uncooked ; EditMode| Exception: System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Xeno.Prodika.GSMLib.BOMCalc.BomCalcNormalizeException: All inputs have a % Step of 0.0. at Xeno.Prodika.GSMLib.BOMCalc.Utils.InputsCalculationValidationsHelper.ValidateInputWithNonZeroPercentStepExists(IEnumerable`1 inputs, IList`1 errors) at Xeno.Prodika.GSMLib.BOMCalc.InputsCalcMethods.FixedStepPercentage.FixedStepPercentageInputsCalcMethod.Validate() at Xeno.Prodika.GSMLib.BOMCalc.InputsCalcMethods.FixedStepPercentage.FixedStepPercentageInputsCalcMethod.CalculateInputs() at Xeno.Prodika.GSMLib.BOMCalc.StepCalcMethods.InputDrivenStepCalcMethod.CalculateStep() at Xeno.Prodika.GSMLib.BOMCalc.BomCalcStepTreeCalculatorBase.CalculateStep(IFormulationStep step, IStepCalcMethodFactory calcMethodFactory) at Xeno.Prodika.GSMLib.BOMCalc.BomCalcStepTreeCalculator.CalculateStepAndRelatedSteps(IFormulationStep step, IStepCalcMethodFactory calcMethodFactory) at Xeno.Prodika.GSMLib.BOMCalc.BaseBomCalcCalculator.Calculate(IFormulationStep initialStep, List`1 calculatedSteps, GetCalculator getCalculator) at Xeno.Prodika.GSMLib.BOMCalc.BaseBomCalcCalculator.Calculate(IFormulationStepAdminable initialStep) at Xeno.Web.UI.GSMExtensions.BomCalc.BomCalcEvents.Calculate(IFormulationStep step) at Xeno.Web.UI.GSMExtensions.BomCalc.FixedInputBomCalcEvents.Calculate(IFormulationStep step) at Xeno.Web.UI.GSMExtensions.BomCalc.FixedPercentBomCalcEvents.Calculate(IFormulationStep step) at Xeno.Web.UI.GSMExtensions.BomCalc.EditModeOnlyBomCalcEventsDecorator.OpenConsumeFromStepOutput(IFormulationStep step) at Xeno.Web.UI.GSMExtensions.Formulation.Steps.FormulationUIEvents.OpenConsumeFromStepOutput(IFormulationStep step) at Xeno.Web.UI.GSMExtensions.Formulation.Steps.ctlInput.btnConsumeFromStep_OnClick(Object sender, EventArgs e) at System.Web.UI.HtmlControls.HtmlInputButton.OnServerClick(EventArgs e) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) --- End of inner exception stack trace --- at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at ASP.baseforms_frmformulation_aspx.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)'

I get run time error in step Set Report in reportgen_xml sequence

I get run time error in step "Set Report" in reportgen_xml.seq. The error code is "Out of memory".
I don't know what to do.
I use BatchModel, I have 6 batch loops. The problem appears on the 3d loop. I have NI 3.5.
Help me!!!!!!
I send attachment (screen of error).
Attachments:
problem.jpg ‏106 KB

Hi Terry, it happened again :-(
Actually I see that the problem appeares in the same subsequence of my sequence. In that subsequence I have approximately 25 numeric steps, 6 of them are on skip now.
The problem appeares suddenly after many batch loops. I have the message "Error, Parameter new value: Out of memory. [Error code -17000, out of memory].
After that on next loop I see it runs and writes reports for others subsequences and steps, but on the "problem subsequence" again I get message "Out of memory"...
At the one of the problem loops I saw other message "An error occured calling 'Process One Result' in ITSO FlyReportGen of TestStand on-the-Fly-Report-Generator. Out of memory. Source: TSOTFRG [Error Code: -17000, Out of memory].
I use "Discard Results or Disable Results " enable option in the ModelOptions. But without success. Is this a problem of TestStand or may be is this the special problem of my subsequence or any step in that subsequence?

The post-expression for the step 'Set Station Global Models' could not be evaluated.

When running a TestStand sequence, I get the following error message:
The post-expression for the step 'Set Station Global Models' could not be evaluated.
Variable or property types do not match or are not compatible.
Error Code: -17321; Variable or property types do not match or are not compatible.
Although I do understand what the above is telling me, fixing the root cause is somewhat another thing.
I'll explain the scenario. The code is developped in TS4.1.0, although that should be irrelevant.
I inherited a TestStand project which calls LabVIEW modules. The original sequence works fine on the test pc (which is remotely located). The local and remote PC's share the same StationGlobals.ini.
Here is why it is strange.. I do get the error message on the local PC whether I use the old or the new code. I was assuming that using the same StationGlobals.ini would have fixed that, but it didn't.
When I run the old code on the remote PC, I do not get that message, but I do get it with the new code. I don't recall modifying code that affected the StationGlobals. My goal is to fix it on both machines (at least the remote one).
This is the expression that it does not like:
StationGlobals.Models=Locals.Models,
However, that very same expression exists in the original code. The one thing that did change is the addition of a new model number in the Locals.Models.newNumber. I suspect that this contributes to the error. But why does it give me an error when I run the original sequence locally? Maybe I should try running it again..
In either case, any suggestions to overcome the error?
Thanks.
RayR
Solved!
Go to Solution.

Please ignore post.
I found the problem.. There was a mismatch with the number of models. Easy fix. It's all good.
For someone else who might tumble onto this thread for the same reason, here's an explanation.
I added a new model with its variants to the list of Locals.Models. In total, there were 16 additions to the list.
I also added these to the StationGlobals. Which meant that my StationGlobals no longer matched the one on the remote PC.
Where the error came in is that there was one missing model in the StationGlobals, so the size (number of models) did not match that of the Locals.
Slight oversight in the sea of models that are listed (I'm not even going to count them). Now fixed.
... and embarrassed ...
I may as well give myself an "Accepted Solution".
Spoiler (Highlight to read)
Since I've been naughty all year it will be my only Christmas gift..
Since I've been naughty all year it will be my only Christmas gift..

Set adapter specific message attribute in graphical mapping

Hi,
I'm trying to set the mail reply to field in email messages sent by mail receiver adapter.
To do this, I use the ASMA and developped my own UDF
public String setMailFrom(String mailFrom, Container container) throws StreamTransformationException{
DynamicConfiguration conf = (DynamicConfiguration) container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(
    "http://sap.com/xi/XI/System/Mail",
    "THeaderREPLY-TO");
String valueOld = conf.get(key);
if (valueOld != null) {
    String valueNew = mailFrom;
    conf.put(key, valueNew);
return mailFrom;
This works but I needed to asign the result of the udf to a node of my target message in order for the udf to be called.
Is there a way to call a UDF without assigning the result to anything in the target message....
Is there a better way to modify the ASMA than using a UDF in a mapping.
Thanks.

assign it to the root node of the target message.
Also use exceptions in your code so that you can do independent testing.
Additional ref:
/people/shabarish.vijayakumar/blog/2009/03/26/dynamic-configuration-vs-variable-substitution--the-ultimate-battle-for-the-file-name

Setting Adapter Timeout

Hello
I am having a File/FTP Adapter at my receiving end.I have noted that if a async msg is sent with Exactly Once option and if FTP server is down the message does not gets delivered but as soon as its up it gets delivered.
I just wanted to know how long Adapter keeps polling to the target directory? Can we set some specific timeout for adapter e.g. if FTP server does not comeup within 15 mins the adapter should timeout and message should fail. The message can then be sent manually.
Thanks in advance.
Regards
Rajeev Patkie

Ashu,
It is not only the JTA timeout which may cause transaction rollback. If JDBC and BPEL are involved then following timeouts also does matter and ideally all of them will be less than the JTA timeout -
1. XA connection timeout configured in data-source
2. Statement timeout configured in data-source
3. BPEL timeout - set property SyncMaxWaitTime (value in seconds) in the EM console
4. SOA EJB's timeout
Now question here should not be that which timeout is actually causing the transaction rollback, rather question should be that why a JDBC call is taking 300 seconds? What processing are you doing which is taking this much time?
Regards,
Anuj

Setting adapter Ldap in Oracle Virtual Directory

I'm setting up a new adapter in Oracle Virtual Directory for a OpenLDAP, something curious happens does not enable me finish the button, another detail is when I click on SSL I get the following message:
could not load certificate chain: java.lang.exception: Could not retrieve certificate

After inspecting the OVD's RootDSE, I noticed that it does not support LDAPv3 controls. There is no supportedControl attribute present in RootDSE even if the Persistent Search Control flag is enabled from OVM.
Is there any way to point to the backend SunOne server's RootDSE through OVD so the SunOne's persistent search control could be used?
Thanks,
Smita Raut

Setting Adapter Specific properties

Hi All,
I have the following Scenario :
Source system ; SAP R/3 - Client Proxy is created to send the data
Destination System : JMS(Websphere MQ) . Receiver JMS channel is used to deliver the message.
I have written a proxy in R/3 system to post the data to JMS.
The receiveing Application is expecting the Message in byte format and it is also expecting a custom property "File Name" as part of the JMS Message properties.
I just stuck up how to set these in my XI message at the sending system and resolve the same at receiver JMS channel and deliver to the target application.
Thanks in advance.
Regards
Renu

Hi,
http://help.sap.com/saphelp_nw04/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/content.htm
have a look at this link from java.sun.com, there you can read details (predefined JMS properties, types you can use, etc..) about JMS properties.
http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/jms/Message.html
If you're talking about "Adapter-Specific Message Properties"
then this is the same as for any other adapter:
have a look at my weblog on "Adapter-Specific Message Properties" usage:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
also check:
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/content.htm
and on this page:
http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/content.htm
you'll see what kind of "Adapter-Specific Message Properties" can you get from your mapping program
Thanks
Swarup

Setting adapter specific re-schedule time period

When sending message in asynchronous mode, if it fails, XI will automatically re-schedule it for a few times later, for a certain amount of repeat times.(I believe our current setting, the retry period is 5 minutes, and for 3 times)
The problem: We have different adapters, and for some adapters, we have special requirement of retry period. My question is, can I set up the retry period per adapter level?

Hi Wgao,
Actually this depends on the Inbound or Outbound Queues.. , I don't think so it is depending on the Interface Level/Adapter Level.
http://help.sap.com/saphelp_nw2004s/helpdata/en/b0/df5f3c8dde1c67e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/75/66ee407552742ae10000000a155106/content.htm
Hope this helps,
Regards,
Moorthy

Speed Step Setting under XP - when I am NON running on batteries

Under XPPRO
Why does the CPU speed (System Properties, General Tab) measure this:
T7600 @ 2.33Ghz, 977 MHz, 2.98 GB of RAM.
Except during load it changes to:
T7600 @ 2.33Ghz, 2.33 MHz, 2.98 GB of RAM.
* During load = running photoshop and makeing the cpu work
Can the speed step be disabled during non-battery mode..... (the 4 sony SZ vaio's that I also bought can.. same CPU core 2 duo) ...)
I would rather have the cpu run slower only when running on battery..
Thank you
MacBook Pro 2.33 3 gigs ram Mac OS X (10.4.8) boot camp

Aha - thanks a bunch (I assume you've very accurately pointed me to the BIOS setting "Timer Wake with Battery Operation") ; the fact that the factory setting is "disabled" (not really clear to me why this is the case with the flash disk in the x300; a spinning disk I could have understood, but would then maybe have expected an option or a hint in the Lenovo tools within Windows for first-time Lenovo users like myself) and/or the warnings associated with changing it must have made me not try changing that of all things.
Also, I DID of course search the forums first, but found nothing specific enough - my bad.

Can I set adaptive resolution to OFF as the default ?

Hi -
I turn off adaptive resolution (fast previews) as a matter of course but it seems that I have to do this specifically for every composition window.
The default is apparently for adaptive resolution to be on.
This is a little tedious and I wondered if there is a way to change this default behaviour.
I would expect to find such a setting in preferences but that only offers an option to set the degree of adaptive resolution - not turn it off completely.
Obviously not desperate but it would be one less hassle.
Thanks.

Thanks Rick.
By the time I discovered that I didn't like adaptive resolution and then how to do something about it I already had a couple of CS6 project files and lots of comps on the current job.
I suppose I would have realised this before too long but I'm grateful to you for taking the time and getting me there quicker.
Thanks - Rod

Step Setting adapter

Similar Messages

Maybe you are looking for