Steps for upgradin 10.2.0.3.0 -4

Hai all,
am upgrading my clusterware and db from 10.2.0.3. - 10.2.0.4
Am going to use the following steps :
Can anyone have a glance on this and let me know if these steps are ok?
non-Rolling upgrade
1) SELECT version FROM v$timezone_file;
If this query reports version 4, no action is required; in this case, continue with steps described in section 7.6.
If this reports a version lower or higher then 4, see OracleMetalink document 553812.1 Actions for the DSTv4 update in the Release 10.2.0.4 patchset.
2) Stop all this service in both the nodes :
OracleDBConsoleSID
OracleServiceSID
OracleJobSchedulerSID
OracleASMServiceASMSID
OracleHOME_NAMETNSListenerLISTENER_nodename
Oracle Object Service
OracleClusterVolumeService
OracleCRService
OracleCSService
OracleEVMService
OracleRemExecService
3) Installing the Oracle Database 10g Patch Set Interactively
RUN OUI (select both the nodes)
After completing successfully, run crs_home\bin\opmd -install on both the nodes to install OPMN ..
4) Run patch102.bat to upgrade the current node, and to automatically start the Oracle Clusterware services:
C:\> CRS_home\install\patch102.bat
5) To upgrade the rest of the nodes, go to the next node and enter the following command:
C:\> CRS_home\install\patch102.bat
UPgrade the database using DBUA or manually ..
Kai

Note, You don't have to shutdown all nodes for the clusterware part. This part can be in a rolling fashion.
have a look at this:
http://jarneil.wordpress.com/2008/06/23/rolling-oracle-clusterware-upgrade-to-10204/
jason.
http://jarneil.wordpress.com

Similar Messages

Ipod not recognized by itunes...next step for nike+

when i started to set up the nike+ i downloaded the new version of itunes then later downloaded the new software update for the ipod nano...now when i plug the ipod into the computer using the usb cord, i get a message that says this...The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software....i have attempted to install, reinstall, remove and install again, itunes and the updated software... yet it still will not recognize the ipod when it is plugged in. How do i get the ipod to be recognized and then what is my next step for using the Nike+ shoes?
ipod nano

I can't even get the tab that says Nike+ when I am trying to sync up. I can't get it to even go on to the Itunes. I can purchase music no problem

Step for Publish a development created with Webdynpro for Java

Good Afternoon.
I am new in this of publish development in the portal.
We created a development with Webdynpro java using RFC. We want know what are the step for publish this development in the portal ESS?
The development work fine. But i don't know how to publish this in the portal.
What configurations i have that do In the part of ECC and in the part of portal.?.
Can someone help me?
Kind Regards-

Hi,
When i have that do configurations for the following paths:
Employee Self-Service>General Settings>Homepage for Self-Services-->Resources
Employee Self-Service>General Settings>Homepage for Self-Services-->Headers and Area Group Pages
Employee Self-Service>General Settings>Homepage for Self-Services-->Areas
Employee Self-Service>General Settings>Homepage for Self-Services-->Subareas
Employee Self-Service>General Settings>Homepage for Self-Services-->Services.
Kind Regards,

Step by step for 2.6

So I think im finally ready to make the plundge to the 2.6 kernel.
So I need some help. Ive only compiled a kernel a few times, and I never changed many settings.
So could someone give a step by step for it (being sure to list any arch-specific quirks)? I would greatly appreciate it.
Also, I hear theres a patch that lets you run the Official Nvidia drivers with the 2.6 kerne, has anyone gone through this? I really have no idea how to go about doing this,as i've only ever installed the .run file.
Any help would be appreciated.
Also, its possible to switch between the 2.4 and 2.6 kernel, right? (obviously with a reboot).
Lastly, Is a new release of the 2.6 due out anytime soon? I dont want to download and compile this just to find a new version comes out.

You have to use module-init-tools which supercedes modutils. I made a PKGBUILD for it for my local system simply so I could uninstall it easier if I wanted. However, you still need the old modutils as well.
Here is my hack to get module-init-tools working:
1. Use the PKGBUILD below to compile and install module-init-tools.
2. For each of modprobe, lsmod, rmmod, depmod, and modinfo from modutils, rename those to modprobe.old, lsmod.old, etc. To find where these binaries are, use "pacman -Ql modutils".
3. Create symbolic links from the binaries that modutils used to provide to the new binaries that module-init-tools provides. Again, use "pacman -Ql module-init-tools" to figure out where the new ones are.
Example - modutils provides /sbin/lsmod. Rename that to /sbin/lsmod.old. module-init-tools provides /usr/bin/lsmod. Create a symbolic link as follows:
[root@limbo root]# ln -s /usr/bin/lsmod /sbin/lsmod
If you aren't 100% sure what i am trying to say here, don't try any of it, or you will bork your system. Also, this is more of a hack, and that's why I didn't upload the package to incoming. I only made the PKGBUILD to keep track of where everything was going.
Anyway... hope this helps you on your way to:
[john@limbo john]$ uname -r
2.6.0-test5
[john@limbo john]$
PKGBUILD
pkgname=module-init-tools
pkgver=0.9.13
pkgdesc=""
url="http://www.kernel.org/pub/linux/kernel/people/rusty/modules/"
depends=()
conflicts=()
backup=()
install=
source=(http://www.kernel.org/pub/linux/kernel/people/rusty/modules/$pkgname-$pkgver.tar.gz)
build() {
cd $startdir/src/$pkgname-$pkgver
./configure
make || return 1
make prefix=$startdir/pkg/usr install

Steps for Email integration in sap crm system?

Hi Experts,
Please guide me the steps for email integration so that the emails are in syn with the WEB UI Interaction centre.Settings at the backend GUI are already defined.Actually in my case the Development system is not integrated with Email sync in WEB UI.I need to test the email functionality in Development system as steps I have followed are as below:
1)TCode :- SBWP,then I have created a mail & send it to email address which is defined in the SO28
2)TCode :- SOST,there I have clicked on my test mail,select it & click on execute button,green light appears & shows the message that the email is successfully forwarded.
Now when I open Web Ui,select my business role & then I go to inbox in the Navigation Bar,select email & click on search.Then it does not appear anything & shows search result zero.
Kindly suggest me the steps so that I can see my test email in Dev system Web Ui business role .
Thanks
Warm Regards
Vineet Joshi

Hi Prashant,
Thanks for your response. I want steps to configure communication channels like e-mail & fax to facilitate receipt of invoice from vendors, sending of PO to vendors, cheques, payment advices to name a few. Please let me know the detailed configuration steps for the same and also do we need to instal any tool to facilitate this process.
Thanks
Best regards,
Bhaskar
Edited by: Bhaskar Umashankar on Nov 25, 2008 4:08 AM
Edited by: Bhaskar Umashankar on Nov 25, 2008 4:08 AM

HT201269 When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a serve

When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

So, in iTunes, when you look at the shuffle's content (in the sidebar) and click on the playlist under the shuffle, over to the right, the songs are in your desired order, correct? Where do you look, or what do you do, that indicates the playlists are in alphabetical order? Are you saying that when you play the songs while using the shuffle, they play in alphabetical order?
If so, when you listen to the songs on the shuffle, are you using the playlist, or are you using the All Songs list? If you are in the default All Songs list, with the shuffle's power switch set to play-in-order (the middle position), the songs play alphabetically, I believe.
The 3rd gen shuffle uses VoiceOver. If you are in the All Songs list, you need to use VoiceOver to switch to the playlist (see manual linked below for details). When you are in the playlist (with the shuffle's power switch set to play-in-order), then the songs should play in playlist order.
There are more details in the manual for the 3rd gen shuffle, which is online here
http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
See page 22 for the section about setting up and using VoiceOver. The part about switching playlists starts on page 23 (Using the Playlist Menu).

Steps for free goods, purchase order and sales order

Hi all,
I am just starting to learn SAP and would appreciate it anyone can guide me along with navigation/steps for the below questions:
1) can we create free goods automatically when purchase order is generated?
2) Can we duplicate data from the purchase order to the inputs of sales order?
Thank you so much for your help!

Hi Experts,
I set Free Goods determination Inclusive Calculation Rule 1=Pro Rata and Cal Rule 2=Unit reference both are working fine.
When trying for cal Rule 3 it gives error message "The system determined free goods with quantity 0 for item 000010
Means for 10Ton of A product 10% means 2To are free. If I apply quantity in multiple of 10 i.e.10, 20 30 free goods are determined, delivery & billing is working well.
But if I apply 25Ton or 38ton, it is not even giving minimum discounts say for 25ton, it should give atleast 20ton equivalent fre goods. I checked in rounding rule OB90 where my company code3000 is giving 10 2 digit for USD currency. I set like this. When I checked pricing for condition type R100 it says requirement 055 not fulfilled. However I have maintained Req 055 & BaseType 28 in pricing procedure.
For cal rule 3 what else setting I should check.
Early reply with detail steps shall be highly appreciated.
Thanks

Intsallation steps for Oracle Applications 11i(11.5.10.1)

Hello All,
Please some one provide me the installation steps for installing Oracle Applications 11i(11.5.10.1) in my local PC.
I got a 5 DVD media pack. I require only Vision database instance(for learning purpose).
Regards,
Kiran

Hi Kiran;
Please some one provide me the installation steps for installing Oracle Applications 11i(11.5.10.1) in my local PC.Please follow below and see its helpful:
Subject: Oracle Applications Installation Update Notes, Release 11i (11.5.10.2) Doc ID: 316806.1
Subject: Recommendations to Install Oracle Applications 11i Doc ID: 294932.1
I got a 5 DVD media pack. I require only Vision database instance(for learning purpose).You have to create stage area. Please follow below and see its helpful:
Re: 12.1.1 on windows 2003
Creating Stages of R12 on Windows
Regard
Helios

What are the steps for loading master data

Hello
what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
if anyone has documents please send me the documents i will be really greatful
[email protected] thanks everyone
Evion

Hi Heng,
Download the data into a CSV file.
Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
http://www.sap-img.com/abap/vendor-master-upload-program.htm
Reward Points for the useful solutions.
Regards,
Harini.S

What are the Major Step for Completely Avoiding the Server Problem?

Like Ora-01033,Ora-12514.

leen wrote:
Ora-12514 : is listener error you need to make sure is running up and no error in listener.log
any database error can be avoided by monitor your database everyday .
It's possible to check daily that listener is running properly. Please, Don't mind can you provide the steps.The steps for what? Checking your listener? Just try to make a connection that uses it. For example.
sqlplus scott/tiger@orclBut believe me, once your listener and clients are configured, the listener will 'just run' and NOT be a problem. I've been an Oracle DBA since 1995 and I've only seen ONE listener failure. And that was only when a friend at another company called to ask about a problem HE was having.

What are the basic steps for creating a content repository?

I am trying to create a document store on a file system (fsdb) that will hold files that are ftp's to that location. Is this possible using KM? If so, what are the basic steps for creating a file system repository and using it through KM? I have found stuff on help.sap.com but that only tells you what each component does not what actual steps need to be taken to setup KM, such as user rights , creating an entry point, so that all of KM is not visible, etc...
If anyone knows of any guides that show a step by step process that would be great too.
Thanks
Paul

Hi Paul
First of all you need to create a new repository
Suppose you want to add all the documents under folder Paul under C: Drive
(Even you can put whole documents of C: drive into Paul)
Navigate to System Admin -> System Configuration -> Knowledge management -> Content Management -> Repository Manager -> File System Repository
There you can create a new directory by clicking on button New
Give the parameters as follows :-
Name               :           Anything you like
Description       :           Anything you want
Prefix (must start with /) : Probably same as your repository name like \Paul
Lookup mode : caseless
Root Directory   : C:\Paul
NOTE: This is the trick. You need to give the proper path means folder path which you want use as repository)
Repository Services : Any services you want
Property Search : Managercom.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
Security Manager         :           AclSecurityManager
ACL Manager Cache   :           ca_cm_rep_acl
The save it
Now see whether the same repository is coming under KM Content or not, if not may be after restart it will come.
I think the above information will help you. If still you have problem, please feel free to contect me.
Regards,
Chamkaur

What are the different steps for costing related to repetitive manufacturi

Hi PP guys
can any one explain the different steps for costing in repetitive scenario as compared to discrete scenario what is the major difference
thanks
shaik

Dear Michel,
!.In REM scenario Product cost collector is required for all the products for which production booking is
to be done.
2.For each production version created a product cost collector will be created in KKF6N.
3.Without a product cost collector production confirmation can not be done in MFBF.
4.Product cost collector is the cost object in REM scenario.
5.Once after creating material master,BOM,work center,rate routing,aproduction version the next steps
is creating product cost collector.
6.While creating the PCC,the system creates a preliminary cost estimate nothing bu the sum up of the
BOM and dare routing cost.
7.Either a prelimnary cost or a standard cost estimate can be used for doing the production
confirmation in MFBF as per the REM profile assigned.
8.Standard cost estimate can be done in CK40N and this costs gets updated in the material master.
9.For every production confirmation made in MFBF the costs gets accumulated in the respective PCC.
10.the variances can be settled periodically as per the business requirement.
Regards
Mangalraj.S

Steps for creation of track

Hi Experts,
Kindly tell me the steps for creating track in NWDI.
Thanks in advance!
Regards

Hello,
If you just begin work on NWIDI, here is a good tutorial
http://help.sap.com/saphelp_nw2004s/helpdata/en/d2/4551421705be30e10000000a155106/content.htm
and here is the details and example to create a track:
http://help.sap.com/saphelp_nw2004s/helpdata/en/d2/4551421705be30e10000000a155106/frameset.htm
Hope this hleps you.
Regards,
Thunder

Steps for creation of DSO in BI7.....

Hi,
Can anyone help me out with the steps for creation of DSO in BI7.....
Points will be assigned...
Cheers
Shankar

Hi Shankar,
Procedure of creation of DSO in BI7 :
1.Select the InfoArea to which the new DSO object is to be assigned, or create a new InfoArea. Choose Modeling--> InfoProvider --> Create InfoArea.
2.Choose Create DSO Object in the context menu for the InfoArea.
3.Specify a name and a description for the DSO object, and choose Create.
If you want to create a copy of an existing DSO object, specify the DSO object that you want to use as a template.
You get to the DSO object maintenance screen.
4. Transferring InfoObjects:
On the left side of the screen, there are various templates to choose from, which allow you to get a better overview in relation to a particular task. For performance reasons, the default setting here is an empty template. Using the pushbuttons, select an InfoSource (only the InfoObjects for the communication structure of the InfoSource are displayed), an InfoCube, an DSO object, or an InfoObject catalog.
On the right side of the screen you define the DSO object. Using the Drag&Drop function, assign the InfoObjects in the key fields and in the data fields. It is possible to select several InfoObjects at once. The system assigns navigation attributes automatically. These navigation attributes can be switched on for reporting in BEx.
Thanks
Reshu

Steps for upgradin 10.2.0.3.0 -4

Similar Messages

Maybe you are looking for