Steps in BW for intigration with PI system through ABAP proxy communication.

Hello Experts,
Need your help.
We need to extract data from PI system through ABAP proxy communication. Kindly suggest the steps need to be perform on BW side.(from data source creation to setting up the delta queue )
Thanks,
Arpan

Hi Raja Sekhar,
Thanx for the quick reply.
If i have got you point right, you are telling me to right a program that will fetch the PO's and push the data into our Interface.
Let me explain you the complete scenario, we already have a ECC to SUS thrgh PI implemeted for the same PO's generated. Our requirement is that depending on the vendor details in PO's we have got to route the PO details to either SUS or BPM.
I had thought of writing a prgm but the abapers feel that a standard BADI for the same would lessen their efforts.
Meanwhile can you explain with a little more detail the standard approach you are referring to... probably some material relating to this would help us...
thanx a lot..
waiting for your reply,
Nandan

Similar Messages

System Setup For ABAP Proxy Communication

Hi All,
I would like to know the basic configuration required in both XI and the connected SAP system (running on WebAS 6.40), for using ABAP Proxy communication (i.e., the steps that are required to be carried out before designing the Message Interfaces in IR and using SPROXY in the SAP system).
Thanks and Regards,
Bharath

Hi Bharatam
Prior to designing and configuring you need to do the following steps in SAP System where proxy will be generated..
1. Go for Tcode SXMB_ADM>Configuration>Integration Engine Configuration.
2.Click on Specific Configuration tab..
3.Category-- RUNTIMEparameter ENGINE_TYPE Current value LOC.
4.Category -- RUNTIME parameter IS_URL Current Value provide intergration server url.
save..
Note:Role of Business system Application System
SM59:
1.Create RFC Destination type H..
provide hostname (xi server) and port
Hope it helps you..
If you have any conecrn you can call me on my mobile..
Thanks
N.Prasad Babu
iGATE Global Solutions Hyderabad : 098490 65377

LV acquire the print information from the embed board with Linux system through serial port

I want to acquire the print information by LV from the embed board with Linux system through serial port, like the window hyperterminal tool?
I try to use VISA serial config function to achieve it ,but lost and prompt that is error like attachment.
I can't sure that my idea is reasonable.
help me
thanks a lot!

I ended up finding the answer to my problem. After pointing a client directly at one of the DPS systems, I saw the following error in the logs:
[27/Jul/2009:17:11:47 -0400] - OPERATION - INFO - conn=3688 op=4 BIND RESPONSE err=12 msg="The server is not configured to pass through control 1.3.6.1.4.1.42.2.27.8.5.1" etime=0After adding that control OID to the allowed-ldap-controls, I could login via password auth. Adding this control also allowed for password changes to work from a client system.

SAP R/3 connection with XI using an ABAP Proxy

Have to develop an ABAP program which will communicate with XI using an ABAP Proxy.

Hi,
you can check these links for help,
To generate abap proxies.
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
/people/bhanu.thirumala/blog/2006/02/07/abap-proxy--xml-to-abap-transformation
Smarter Approach for coding ABAP Proxies
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
Regards,
Samson Rodrigues.

What are the pre-requisite for ABAP Proxy communication?

What are the pre-requisite for ABAP Proxy communication?

hi,
How to create proxy.
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
How to Activate Proxy.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ABAP Server Proxies (Inbound Proxy)
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
OutBound Proxy (Client Proxy)
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
File to R/3 via ABAP Proxy with good example
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
Debug your inbound ABAP Proxy implementation
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
Synchronous Proxies:
Outbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
Inbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
regards
srinivasreddy

Does anyone knows a way to work with various Pages documents at the same time, for example with a system of tabs to switch directly from one document to the other?

Hello everyone,
Working with numerous Apple Pages documents at the same time, I am looking for an efficient solution to switch faster from one document to the other. Integrating all them in a single framework, for exemple by switching from one to the other with a system of tabs would be of great help. Does anyone knows if such a possibility exists?
Thanks in advance,
Jean-Baptiste

jbp- wrote:
Thanks. It works and is very efficient. Not as much as a real system of tabs, but is allows to switch very fast between different documents. Only regret I would have is that it doesn't work with a document which is on full page mode. But that's already very helpful!
You're very welcome but Peggy really gave you the answer already.
With regard to the full screen apps, I don't think Apple have yet worked out how to make them elegantly coexist with other apps. The closest you can get is the four finger swipe gestures you may use on a trackpad if you have one (Mission Control and App Exposé).
In fact nowadays I use the App Exposé (four finger swipe down gesture) more often than I use Command-Accent to move between documents in the same app (when not in full screen). It also as the advantage of showing you thumbnails of recently opened documents below the ones already open within the app. If you haven't tried it, I suggest you give it a whirl.
I can't remember now but I think the four finger gestures are not enabled by default and you must switch them on in System Preferences > Trackpad > More Gestures.

Problem with Configuration in Production ( ABAP Proxy - XI - FILE)

Hi All,
I have a ABAP Proxy -> XI -> FILE scenario wich is working perfectly in DEV and QAS environment.
When the person responsible for transporting tried to transport the objects in QAS to PRD, the following error happened:
Direction of communication channel |BS_MA_FileServer_PRD | CC_File_PedidosServ_MA_FileServer_IA is incorrect.
Correct the direction or choose another communication channel
BS_MA_FileServer_PRD - Business System (FILE)
CC_File_PedidosServ_MA_FileServer_IA - My FILE Communication Channel
This was what the Basis person sent to me. I don't have access to know exactly what happened. And I really don't know what could be wrong or if maybe a component was created wrongly in Production.
Hope you can help.
Points will be given.
tks.. Daniela

You have mentioned FILE is on the receiving side and ABAP proxy is on sender side.
But the error pasted by you clearly shows syntax of a Sender Agreement .
For receiver agreement it should be |<Sender Service>| |BS_MA_FileServer_PRD | CC_File_PedidosServ_MA_FileServer_IA
Bipin

Http to Abap Proxy communication with multiple queues generation in Recevr

Dear SDNs,
I need some help in the following scenario, appreciate your suggestions and help .
I am receiving the messages from sender to PI on http posting, from PI I am sending the message to SAP system using receiver xi communication channel ( receiver is abap proxy).
Sender will send the messages in QOS=EOIO, QUEueID=XXXt_100 etc parameters, when large volumes cases, it is getting delayed to process it using a single queue.
We are thinking to dynamically generate multiple queues in PI and send the same queue ids to receiver SAP system to process all the messages quickly in SAP System also.
Help /Clarifications needed:
1. XI receiver communication channel in pi does not provide any options to generate dynamic queue id based on payload content (using dynamic configuration) and sent it to SAP.
2. Module Tab in receiver communication channel also got disabled to add custom adapter modules, can we add custome adapter module on xi receiver channel to generate dynamic queue id ?
Really appreciate your immediate help and suggestions.
Thanks.
Suraj.

Dear Praveen,
Thanks lot for the immediate reply, we need to use EOIO, as the messages need to be processed in the same order we send and receive, there is no flexibility in QOS=EOIO, Appreciate if there is any other thoughts?
Thanks In Advance.
Suraj.

Issue with FM 'STATUS_CHANGE_EXTERN' using ABAP Proxy

Hi Experts,
I am using the FM 'STATUS_CHANGE_EXTERN'   & 'STATUS_CHANGE_INTERN' to change the user status & system status using ABAP Proxy.
But SAP is updating the system status using ABAP Proxy through ''STATUS_CHANGE_INTERN'' but not updating the User stauts 'STATUS_CHANGE_EXTERN' using ABAP Proxy but when run the same in foreground then it's working fine..
I have already used the External Commit for the same.
Please help me in this case.
Thanks in Advance
Sachin

After call of CRM_STATUS_CHANGE_EXTERN you need to call BAPI_TRANSACTION_COMMIT.
call function 'CRM_STATUS_CHANGE_EXTERN'
    exporting
        objnr               = iv_guid
        user_status         = iv_status
    exceptions
        OBJECT_NOT_FOUND    = 1
        STATUS_INCONSISTENT = 2
        STATUS_NOT_ALLOWED = 3
        OTHERS              = 4
if ( sy-subrc = 0 ).
    call function 'BAPI_TRANSACTION_COMMIT'
        exporting
            wait = ABAP_TRUE
else.
    "!+ Handle error
endif.
Best regards,
Tomas.

Problem with numeric types in Abap Proxy

Hello,
We are having problems with some abap proxy calls. When a numeric type is filled with 0 the node it´s automatically removed and no value it's recived in XI. The only way I have found to avoid this problem it's to define the field with type string or change the cardinality to 1..1 instead of 0..1. It's there any way to maintain the type and the cardinality?? Maybe with a pattern??
Regards,
Alberto Pla.

Hi Alberto
I had this problem, and I decided to use xsd:string instead of xsd:integer. This will solve the issue.
Anyway.. check this note:
[Note 1242795 - Mapping of XSD default values by ABAP Proxy Generation|https://service.sap.com/sap/support/notes/1242795]
Regards
Francesco

How to install ADS for usage with multiple systems ?

Good day,
In our ERP6 System Landscape we have the usual DEV, TST and PRD systems. I have a request to setup ADS with interactive forms to be accessible from each of these systems. Am I right to assume I would need to install a Java Add-In with ADS on each system so each system can have it's own database source for data capture from the interactive forms ? There is no mention in the documentation of using multiple database sources on a single ADS configured system.
Your suggestions and advice on this matter are greatly appreciated.
Regards,
Nelis

Nelis
you dont need any JAVA Addin install on your connected Systems (HR, eRec, ECC or whatever)
You just need the RFC from ABAP (lets say ECC) to your ADS (JAVA)
you can connect as many Systems as you like. But also check SAP Note #1133230
We actually have a 2 TIER Landscape Only. ADS-DEV and ADS-PROD. All Development and Quality Systems (HR, eRec, ECC, BW, XI, SolMan) are connected to ADS-DEV. All Production SAP Systems are connected to our ADS-PROD
http://help.sap.com/saphelp_nw70/helpdata/DE/37/504b8cbc2848a494facfdc09a359b1/content.htm
Nesimi

BES Server For Email With PC System Sync

Good day,
By turning wireless sync off on the Blackberry I have the environment I want of receiving emails from my company, while maintaing my calendar and contacts via a PC based system Goldmine.
The problem arisies in that without understanding "Why", periodically the Blackberry Calendar Option of Wireless synchronization changes to YES without my doing so. This leaves me with dupicates on the blackberry and the entire PC based calendar events on the Corporate Outlook calendar.
Is their a way to prevent this?
Your assistance will be greatly appreciated!

This is a limitation with a POP account. Is your Nokia set to automatically check the account for new messages? If so, I'm not sure why the same didn't occur between your Nokia's mail client and Outlook on your PC.
Although it is possible to access a POP account with more than one email client, a POP
account is designed to be accessed with a single email client only.
Two email clients cannot check the incoming mail server for a POP account at or near the same time. If a 2nd email client attempts to check the incoming mail server at or near the same time as another email client is doing the same, the 2nd email client will be temporarily locked out by the incoming mail server for the account.
This is not a problem with an IMAP account.

Is OVD requires additional licence for intigrating with Active Directory?

Hi
My organization have two active directories with two domains. We are planing to implement Oracle Identity Management for all oracle production databases with OVD intigrates with existing AD's. Is OVD requires any additional license? If requires cost of license?
If any one implements the same please share the setup steps and license information.
[OVD overview pdf|http://www.oracle.com/us/products/middleware/identity-management/059380.pdf]
Thanks,
Sudhakar

Usually the Identity management Suite would be self-content with all IAM products. These things mostly depends upon the type of license you have agreed upon with Oracle. Have a word with Oracle. Licensing is not a straight forward defined set of rules, may vary conditionally.

Can you get an 800 number for trouble with your system?????????????? I have to call IT every day to do something to make PDF'S Abobe 10.1

Abobe the worlds worst customer support can I return my purchase

Try the following, in order:
1. Delete Preferred Network(s)
o System Preferences > Network > AirPort > Configure
o In the "By default, join:" pull-down menu, select "Preferred networks"
o Delete the network(s) you regularly use from the list
2. Delete AirPort Keychain Entries
o Launch the "Keychain Access" application located in Applications/Utilties.
o Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
o Restart, or log out then back in.
3. Add Preferred Network(s)
o System Preferences > Network > AirPort > Configure
o In the "By default, join:" pull-down menu, select "Preferred networks"
o Add the preferred network(s) using the "+" button.
o Restart or log out then back in.

Possible to use the MBP display for use with XBOX 360 through DVI port?

Hi everyone, I know that the topic sounds ludicrous to probably a lot of you. After all, how dare a Mac user use a Microsoft machine right ;)? Well, truth be told, I like the 360 and that's the only MS product I prefer to use.
Anyway, I'm going to be picking up my own 360 within the next few days and am currently deciding whether to also buy a new HDTV with the purchase or if I can wait. I'm going to be buying a new TV eventually but I was hoping to put off the purchase for a while since I remembered that the 360 can hook up to monitors through VGA. So what I want to know is whether the DVI port on my MBP is output only or will it accept input signals? Also, if it is possible to hook up my 360 through the DVI port, is there an easy way to attach the DVI-VGA adapter to the 360 seeing? By this I mean, the adapter is only about three inches or so and it would be pretty difficult to attach both machines to each other, so I was wondering if there might be a female-female VGA adapter bridge or some easy method of doing this.
Thank you all for your help in advance.

Outsider,
Check out this link and enjoy the 360 on your MBP!
http://faq.elgato.com/index.php/faq/more/288
Here is another one!
http://faq.elgato.com/index.php/faq/more/443
N8

Steps in BW for intigration with PI system through ABAP proxy communication.

Similar Messages

Maybe you are looking for