Steps in Message Monitoring

Hello,
is there any setting/customizing which steps of processing of one message is shown in SXMB_MONI.
I have two scenarios with the same IDOC:
R/3 --> XI (mapping) --> IDOC Adapter --> R/3
and R/3 --> XI (mapping) --> XI adapter --> XI --> R/3
In the case of sending out with the IDOC Adapter I see also the steps of interface determination, mapping, call adapter and in the mapping step I can see the changed IDOC.
In the second case the last step is the receiver determination and I can not see the new generated IDOC.
But the mapping works, as in the second XI I can see the correct payload.
best regards
Werner Magerl

Hi Werner,
Check out this weblog:
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
this may be helpful to you.
regards,
Ravikiran.

Similar Messages

Multiple mapping steps in the message monitor

All,
I have an interface that has several different mapping steps for the one interface (first one is a java mapping, and then the second an XSLT) and XI only shows one mapping step in the message monitor (which encompasses all of the mapping steps). The payload before is the payload before any of the mapping steps, and the payload after is the payload after all the mapping steps.
I would like to be able to see the payload at each separate mapping stage. This would make it a lot easier when debugging problems in the later stages of the mappings. Does anyone know if this is possible?
Regards,
Jason

Hi Jason,
Even I have tried to see the results of multiple mappings in SXMB_MONI. But I couldnt find a way till now.
I believe there is no way to see the results of multiple mappings. The only possible way is to test your mapping locally in IR.
Regards,
Divija.

Wrong port in FTP receiver adapter - no errors in message monitoring?

Hello all
We're on XI 3.0 SP16 and have created / configured a HTTP XML -> XI -> FTP Server scenario. In the receiver comm. channel (ftp) we had specified a wrong port number and always wondered, why we never got errors in message monitoring. Everything seemed to be processed correctly... but no file arrived on the FTP server (receiver) side!
After correcting the wrong FTP port number in the receiver FTP comm. channel everything went fine.
We now encountered a similar problem with a RFC receiver adapter. We're using it in another scenario HTTP XML -> XI -> RFC to SAP R/3 (4.7).
For some reason it died (red status in adapter monitor) and it was no more possible to do RFC calls from XI to SAP R/3 (normal RFC adapter, NO proxies).
In XI message monitor everything seemed to be ok but no message arrived till SAP R/3. Nothing in any queue...
After deactivating and reactivation the RFC receiver comm. channel it worked again BUT ALL PREVIOUSLY SENT messages seem to be lost.
Is it really the way it works? Does XI integration engine at runtime NOT catch whether or not a RFC or FTP receiver adapter died, thus is not able to tell somewhere in message monitor that a message could not be delivered at all?
I'm really confused here but hopefully I simply don't understand some easy principles to take into account...
Our SAP R/3 is on rel. 4.70 with Web AS 6.20. The XI 3.0 plugin is not installed. Do we need to go with server proxies there and use QOS = best effort?!?
Thanks for some suggestions.
Best regards,
Renaud

Hi Michal
Thanks... works great for normal XML based messages!
Now, what if I wanted to pass binary files from one ftp server via BPM to another ftp server in order to enable the transport acknowledgment?
The files polled from ftp server using the ftp sender adapter are all in binary format (ARJ). No xml data in there. How should the message format look like in BPM for the receiving step? Or: how to make sure not to loose the binary content when passing through BPMs?
I need this sort of scenario because of the tansport acknowledgment and because I need to have some sort of message splitting (send the binary file over to a second ftp server and additionally send some kind of info message to SAP R/3 regarding thin binary file).
BTW: in the MessagingSystem/monitor/monitor.jsp I do not see sender / receiver information. Is this normal? It's quite of a bad thing to look inside each message in order to find out what message I'm having in front of me...
Thanks a lot for your support and patience!
Kind regards,
Renaud

File Adapter picks up the file but cant see it in MONI/Message Monitoring

Hi
I am using FCC in Sender File Adapter and have only one sub structure under Recordset hence I have not used the 'Key Field Name' though ''Key Field Type' by default is 'String(Case-Sensitive)'. Besides the 'fieldNames' heading I have mentioned all the fields of the sub structure in the same order as I have mentioned in the Data Type.
The problem that I am facing is that even though the file is picked up from ftp successfully still I cant see any traces of it in either MONI or Message Monitoring though
The error that I receive in the MDT is -
Success : Entire file content converted to XML format
Warning : Empty document found. Proceed without sending message
Success : File "Test.csv" deleted after processing
and I have data in the file.
Can u suggest a solution?
Warm regards,
Vaibhav

> Hey
> >>So I have filled my test excel file with the values
> A and B in adjacent columns
> are you picking up some .xls file?if yes,then Content
> conversion wont work,You have to create adapter
> module processor and you have to add to your module
> processor bean to the adapter...Just check the
> following procedure...
> https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/
> 1967
> Thanx
> Aamir suhail
Hi Aamir
I had a look at the blog and according to that I will need to create a module...the prob with that is in the blog he hasnt provided the full steps for that. Also I had tried this thing earlier of using an excel file and saving it in .csv format and it had worked. I cant figure out what the error is this time
Have u worked on creating amodule for excel files b4?
Vaibhav

"Error in message monitoring in runtime workbench"

Hello All,
I have an error in message monitoring in runtime workbench.
We have installed PI7.0 and it should run on port 50000.But it is running on port 50100.
Please suggest what are the steps involved to resolve this problem.
Thanks and Regards
SAN
null
k san

San,
Can you please copy / paste error message.
Also check if you have set correct port in Exchange profile under Runtimeworkbench.
Nilesh

Message Monitoring for each within the BPM process

I have a question concerning message monitoring within a BPM process. I receive an IDOC into my BPM process. I then have three transformation steps before sending an E-mail to the end receiver. When I look at the messages in the workflow log, I am unable to see the message after each transformation step. In the log display if I click the instance ID for all steps except the first step I am unable to see a message.
List of Message Objects
Object Type              Instance    ID                          Creation Time
ZXI_PROXY...0001     DC9F66530C7899F1AC430017A44943B2     11:04:39
ZXI_PROXY...0001     DC9F66530C789FF1AC430017A44943B2     11:04:39
ZXI_PROXY...0001     DC9F66530C78A5F1AC430017A44943B2     11:04:39
ZXI_PROXY...0001     DC9F66530C78B1F1AC430017A44943B2     11:04:39
ZXI_PROXY...0001     DC9F66530C78ABF1AC430017A44943B2      11:04:39
ZXI_PROXY...0001     DC9F614BA98C51F1AC430017A44943B2      10:28:40
If I click all except the first instance I receive the following message:
No messages available for selection
Message no. XMS_ADM113
Is there a way to make the message persistent after each step within the process? I would like to see the data after each step in the workflow log. Is this possible?
I do receive the e-mail from the send step so I know that it's completing the process. What I'm not sure of is if each step individually processed the data as I expected.

Hi Audra,
Check this link
BPM monitoring
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
Sachin

Problem with message monitor in pi 7.4 ( AEX)

Hi All,
I have been wondering if the SXMB_MONI features are all intact in the JAVA only stack.
While in the ABAP stack i could see the XI SOAP header but in the new stack i only see XML message -> payload without the message headers,
Was wondering where the old one .Am i missing any config steps to help enable the below steps as i see them.
Basically. I want to see the SOAP headers if it delivers the user id from PI or if it delivers the user id from request.

Hi,
Check your sender SOAP communication channel and play around with the settings available.
You will see the difference within the message monitor.
Kind regards,
Dimitri

Message Monitor List Empty

Hello All,
Working on MII12.1.6 Build 96, NW7.1 SP03
With my user name, I'm logging to MII on 2 different workstations, at the same time.
1st one is showing the messages received on the defined listeners in the Message Monitor.
2nd one showing "No data was found in result" ..
On the two stations we have the same browser versions, same JRE level, same everything (standard clean setup).
Anybody seen this happening before? What are your suggestions for the steps I should take to display the messages received by MII in the Message Monitor on both workstations using the default search pattern (i.e. all messages on all listeners, all types of message statuses)?
many thanks,
paul.

Hi Paul,
we have experienced something similar (empty Message Monitor list). It was due to different language settings in the NetWeaver UME user setting and the browser. Maybe you check if the language settings of the workstations and are different.
Michael

Loaded File not visible in XI Message Monitoring

Hi,
I have a configured a scenario where a flat file is integrated via XI File Sender Adapter. The file was loaded out of the file directory, but in XI Message Monitoring I can't see the message. In the Adapter Monitoring, the respective Communication Channel is green.
Any idea what this might be?
Thanks in advance.
Alex

Hi,
In general , we will follow the below steps
--First we we check for the file is picked or no, if not see the Sender side CC parameters like mode and path details
--If file was picked then we need to check whether we are using the File content conversion parameters or not if yes we need to check the FCC parameters ,
-- Goto RWB-Channelmonitoring by the following link
http://host:port/mdt/channelmonitorservlet
select the sender side CC name and check for errors
-- If no errors in above, goto SXMB_MONI for Integration Engine xml processing , check for successful or error occured black or red color
--if success in SXMB_MONI then we need to check in RWB as above channel monitor now select the receiver side CC
-- If no errors then check for output file is placed intarget or not
Regards
Chilla

Message Monitoring Tool in RWB for Integration Engine Messages not working

Hi all
We currently work on a Pi 7.11 system. I f we start the runtime workbench and going to the message monitoring, we want to get in to a message in the integration engine. Normaly we should get the same sxi_monitor in the web browser, but we only get the soap envelope. The pipeline steps on the left side and also the payload cannot be seen.
We increased the rights of the user to sap_all but this did not changed anything. We also implemented the J2EE monitoring rule.
Seems to me as we forgot a setting after installation, but which??
Thanks in advance for your help.
Oliver

Hi Oliver,
I work on PI 7.0 and I know it's very different from 7.1x releases, but your problem sounds like a similar "problem" on 7.0.
Is your message sycronous? At PI 7.0 the default configuration is defined to remove the payload of sync messages. You can change it on JAVA Visual Administrator.
Try to find this parameter in Java Visual Administrator and set it to "false", below you will find the PI 7.0 path to this:
Server >> Services >> SAP XI AF Messaging >> messaging.syncMessageRemover.removeBody
I hope it helps,
Marcelo Vieira

No authorization to view payload in auditLog Of Message Monitoring in RWB

Hello,
I am not able to view the message payload in the audit Log In Message Monitoring in RWB.
It says no authorization.
Can anybody tell me what authorization object is required for this?
Thanks,
Loveena

Hello,
Check the link below:
community/pi-and-soa-middleware/blog/2008/02/07/display-adapter-synchronous-message-content-in-rwb-of-pi-71
The configuration consist to set a parameter on NWA. Check the following step:
1. Go to <host>:<port>/nwa;
2. Go to Configuration Management and then Infrastructure;
3. Java System Properties;
4. Click on services tab and then search for XPI Service: Messaging System;
5. Search for messaging.syncMessageRemover.removeBody on parameters tab and modify from true to false. False value should be displayed in the custom value column.
After that, you'll be able to see the payload in RWB.
Regards,
Arthur Silva

Message Version option in Message Monitoring(integration engine)??

Hi All
While Message Monitoring in Integration engine, when i was checking the message contents in audit log i found a small drop down at the top saying "message version" which has version 0, version 1......
Not all messages were having the same versions, some were having 2 some 8.
What is this Message version option???
Any information on this will be appreciated.
Regards
Jabbs

hi,
>>>What is this Message version option???
have a look here
http://help.sap.com/saphelp_NW04/helpdata/en/c9/775b3b82646c3ae10000000a114084/frameset.htm
basically it lets you compare xml message after each pipeline step
Regards,
Michal Krawczyk

Activating Message Overview Message Monitoring

Hello,
We recently moved our XI system (3.0) towards SP21. Now we want to activate new way of message monitoring using the message overview. As stated in http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
note 1031773 describes how to activate the message status overview. However when i search for that note. The note is not (anymore) available.
An SAP note with the number requested could not be found.
Somebody a clue where the note has gone? Or can somebody tell me what are the steps to take to activate message-overview monitoring?
Thanks in advance,
Emile

Hi,
It is better to raise a new OSS. Sometimes, with a new solution or incorrect solution , some of the OSS notes actually gets cleaned up or deleted.
Regards
Krish

RWB-Message Monitoring and End-to-End Monitoring

hi
Can someone explain the differences between Message Monitoring & End-to-End Monitoring through RWB. I see both of them displaying the messages status with better descriptive with End-to-End Monitoring.

HI Chandra
You use message monitoring in the following cases:
1 To track the status of messages
2 To find errors that have occurred and establish what caused them
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/2f/4e313f8815d036e10000000a114084/content.htm
You use end-to-end monitoring in the following cases:
1 If you want to monitor message processing steps in a number of SAP components (to be configured).
2 If you want to monitor the path of individual messages through these SAP components, from start to end.
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/content.htm
End-to-end monitoring includes message monitoring, adapter monitoring, BPE if BPM is involved.. so end-to-end monitoring tells you complete description of your scenario......but message monitoring is concerned only with source message coming to target message successfully generated.
Cheers..
Vasu
<i>** Reward Points if found useful **</i>

Cant see synchronous http-calls in message monitoring

Hi all,
I 've got a synchronous http call. When the request was bad I saw the failed request and response messages in XI message monitoring with red lights. But now the call seems to work fine, because the sequenced step is showing. But I can not see the http-message in message monitoring.
Any ideas?
Regards
Mathias

hi,
have a look at my blog:
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
how to turn it on
logging_sync
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Steps in Message Monitoring

Similar Messages

Maybe you are looking for