Steps required while moving employees from one organisational
Can any one explain and write down steps required while moving employees from one organisational unit to other organisational unit.
regards
Hi ganesh,
Firstly create the new position for the employee if it is not already existing.
Then goto SPRO : Personnel Man. -> Pers. Adm-> Customizing procedures -> Actions -> Define infogroups -> infogroup.
Only Copy 0001 is enough.
Then Setup personnel actions with this infogroup.
Then go to PA40 and execute this action for that specific employee.
You will only need to change the position assignment, org unit, job, vs all come from position info.
Regards,
Dilek
Edited by: Dilek Ersoz on Oct 14, 2008 9:41 AM
Similar Messages
-
Moving Stack from one folder to another?
Is there a way to keep a stack together while moving it from one folder to another. When I grab the stack and drop it to a folder, I view the folder and the images are no longer in a stack. It would save me a lot of time if they would stay stacked. Am I missing something?
Thank you.Well your code is unreadable because you didn't post it properly, but I'd guess you've fallen into the old multiple-delete trap in a new way. It's like this:
To start with you have messages numbered 0, 1, and 2, let's say. So you write a loop that lets i run from 0 to 2 and delete message number i in the loop. What really happens? The first time through the loop you delete message number 0, after which you are left with messages numbered 0 and 1. The second time through the loop you delete message number 1, after which you are left with message 0 only. The third time through the loop you delete message 2, which isn't there and you get that message.
That's just a guess, I didn't have the patience to read that ugly unformatted code. There are two ways to do the multiple delete properly, if that's actually your problem: (1) run the loop upwards from 0 and always delete message 0; (2) run the loop downwards from N-1 to 0 and delete message i. -
Impact of moving a user from one organisational unit to another.
Hi
my system description :
extended classic
srm 5.00
I am new to srm and i would have some questions about the impact of moving a user from one organisational unit to another.
The senario is that:
I have moved a user from organisational unit X to Y lets say different purchasing organisation
The user had PO created in organisational unit X waiting for goods receipt but even if he is now in organisational unit Y he can still create the good receipt for the PO created in organisational unit X .
Is it ok?
Futhermore not only can he create good receipt but the good receipt take the cost center assigned in organisational unit Y whereas the PO has the cost center of organisation X.
I believe that is how the confirmation works in SRM. However is there a way for it to take account assignment from the PO instead of where the user is situated in the org hierarchy when doing confirmation.
ThanksThanks for your answers
Maybe i should explain how the user was moved.
I did not used users_gen because i didn't want the user's partner ID to be changed. If the partner ID is changed then the user would not be able to access PO from old Organisation Unit. (can somebody confirm this please)
I did right click on the wanted Organisation Unit then assign the user. The problem is that the relationship between the user partner ID and the new organisation unit was not maintained and the user could not create shopping cart in the new organisation unit.
To solve this issue oss note 1041701 was implemented and the issue was solved.
But before the the implementation of oss note 1041701, if the user had open items from old organisational unit he could not access PO thus could not confirm goods receipt when moved in new organisation unit.
Now this is possible he can confirm goods from old unit but the confirmation is done using cost centre of user instead of the cost centre of the PO.
Jagadish you said that the confirmation must be done using PO accounting details not the user attributes. Then i think i have a problem in my system.
regards,
yannick. -
Error while transferring an employee from one position to another
When i am transferring an employee from one position to another i am not being able to do so. This position is visible in HRP10001.
Hi,
Have you tried using any other aciton like Org re-assignment, promotion action etc or tryid in PA30 itself?
Regards
ET -
Problems moving distribution from one environment toanother
Hi all,
Problems moving distribution from one environment to another
Initially we have the environment as below:-
Production :-
Server1 : AIX Environment manager (dealing with conductor, web, db)
Server2 : NT Node manager (dealing with outlook)
Development :-
Server3 : NT Environment manager (dealing with conductor, web, db)
Server4 : NT Node manager (dealing with outlook)
Currently, we intended to change the production environment via
changing the Server1 to Server3, as the new environment
manager, while the node manager unchanged.
Things that we've done in Server2, the node manager for
production environment:-
1) Pointing to Server3 instead of Server1, by changing Forte
Control Panel and changing registry entry.
2) Re-deploy the needed libraries in the new environment, so
that it can has the updated version.
3) Re-olegen the vb component.
4) Re-deploy the whole application.
However, we're facing the following problems/error messages
for the newly deployed Forte application:
1) Failed to bind to object named (/wfuseraccessobj/odbso/1)
2) Failed to bind to object named (/wfuseraccessobj/emailso/1)
These errors are actually refer to the libraries that used by
Conductor in order to perform database retrieval, and emailing
functions. These functions were worked properly in the initial
environments.
NOTE: The first error could be okay when refreshing the internet browser
(as our system is a web-based system), somehow it keeps on occurring every
now and then.
Please advice on this matter and reply ASAP as the project
delivery is crucial for our side.
Errors:
ERROR 1:
registering agent anchor /WorkFlow/centrale/lmseng/Agents/EngineUnit_Unit1
Attached to manager for node CHARON.
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: changing engine state
to
ONLINE
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: trying to remove old
shell anchor
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: creating engine object
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: engine object created
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: attaching database
service
23-Nov-1999 17:38:33: EngineShell.SetEngine: Unit1: connected to database
23-Nov-1999 17:38:33: EngineShell.SetEngine: Cold-starting engine... 0
23-Nov-1999 17:38:35: EngineShell.SetEngine: Unit1: registering shell
anchor
23-Nov-1999 17:41:31: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:41:33: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:41:34: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:41:34: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:42:54: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:42:56: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
ERROR 2:
registering agent anchor /WorkFlow/centrale/lmseng/Agents/EngineUnit_Unit1
Attached to manager for node CHARON.
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: changing engine state
to
ONLINE
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: trying to remove old
shell anchor
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: creating engine object
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: engine object created
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: attaching database
service
13-Oct-1999 16:45:43: EngineShell.SetEngine: Unit1: connected to database
13-Oct-1999 16:45:43: EngineShell.SetEngine: Cold-starting engine... 0
13-Oct-1999 16:45:47: EngineShell.SetEngine: Unit1: registering shell
anchor
13-Oct-1999 16:49:58: Build: Exception raised of type ActivityException and
severity 3: A TOOL execution exception caught in ReadyAction().
13-Oct-1999 16:49:58: Build: Exception raised of type ActivityException and
severity 3: Exception in activity TempReview (4) will cause an abort of
process LMSPD (10).
SYSTEM ERROR: Exception in activity TempReview (4) will cause an abort of
process LMSPD (10).
Class: ErrorException
Error #: [2, 122]
Detected at: OfferedActivity.Activity.AbortProcessInException()
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
INFORMATION: Stack Trace for Exception:
No 4gl Traceback
Class: qqsp_ErrorDescriptor
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
SYSTEM ERROR: A TOOL execution exception caught in ReadyAction().
Class: ErrorException
Error #: [2, 107]
Detected at: OfferedActivity.ReadyAction
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
INFORMATION: Stack Trace for Exception:
No 4gl Traceback
Class: qqsp_ErrorDescriptor
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
SYSTEM ERROR: The attribute firstReviewerID is not available in this
accessor.
Class: qqsp_UsageException with ReasonCode: SP_ER_PARAMETERERROR
Error #: [15, 1206]
Detected at: AttributeAccessor.AttributeAccessor.Find()
Last TOOL statement: method TempReview.OnReady
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
Begin Stack Backtrace
==========================================================
Trace caused by a segmentation or access violation in the Forte executable:
Application: WFEngineUnit_cl1
Platform: PC / NT
Partition: WFEngineUnit_cl1_Part1
Generated: 02-Jun-1998 19:10:20
By: ftexec Version 3.0.G.2
Fault at 13-Oct-1999 16:49:58, pid '2441', node 'CHARON':
User Name: SYSTEM
Machine Name: CHARON with 2 CPU(s)
OS version 4.0
Loading symbols for ...
d:\forte\install\bin\QQCT.dll
d:\forte\install\bin\QQSH.dll
d:\forte\userapp\wfengine\cl1\wfengi1.exe
d:\forte\install\bin\QQKN.dll
d:\forte\install\bin\QQSM.dll
d:\forte\install\bin\QQDO.dll
d:\forte\install\bin\QQCM.dll
d:\forte\install\bin\QQRT.dll
d:\forte\userapp\ofcustom\cl0\libofcus.dll
d:\forte\install\bin\QQHD.dll
d:\forte\install\bin\QQDB.dll
d:\forte\install\bin\QQDS.dll
d:\forte\install\bin\QQDD.dll
d:\forte\userapp\wfcustom\cl0\libwfcus.dll
d:\forte\userapp\wfenvdef\cl1\libwfenv.dll
d:\forte\install\bin\QQEM.dll
d:\forte\install\bin\QQFO.dll
d:\forte\install\bin\qqtlnt.dll
d:\forte\install\bin\w3tpwss.dll
C:\WINNT\System32\rpcltc1.dll
C:\WINNT\System32\comctl32.ocx
d:\forte\install\bin\QQRP.dll
C:\WINNT\System32\OLEPRO32.DLL
C:\WINNT\System32\WINSPOOL.DRV
C:\WINNT\System32\MFC40.DLL
C:\WINNT\system32\OLEAUT32.dll
C:\WINNT\System32\rnr20.dll
C:\WINNT\System32\IMM32.dll
C:\WINNT\system32\msafd.dll
C:\WINNT\System32\wshtcpip.dll
C:\WINNT\System32\WS2HELP.dll
C:\WINNT\System32\WS2_32.dll
C:\WINNT\System32\WSOCK32.dll
C:\WINNT\System32\MSVCRT40.dll
C:\WINNT\system32\COMCTL32.dll
C:\WINNT\system32\ole32.dll
C:\WINNT\system32\SHELL32.dll
C:\WINNT\system32\comdlg32.dll
C:\WINNT\system32\ADVAPI32.dll
C:\WINNT\system32\RPCRT4.dll
C:\WINNT\system32\USER32.dll
C:\WINNT\system32\GDI32.dll
C:\WINNT\system32\KERNEL32.dll
C:\WINNT\System32\ntdll.dll
C:\WINNT\system32\MSVCRT.dll
C:\WINNT\System32\MSVCIRT.dll
Stack backtrace ...
wfengi1 004edd89 (017bb4f0,019e85e0,046bfe34,016a0c08)
wfengi1 004e29d1 (017bb4f0,019f1fc0,00000000,00f039d0)
wfengi1 004e2ecb (017bb4f0,00000024,019e85e0,019f1f98)
wfengi1 004e4503 (017bb4f0,019e85e0,01a20025,01a22868)
QQKN 005dc66f (017bb4f0,019e85e0,019f0025,01a22848)
QQKN 005df7a5 (017bb4f0,019e85e0,01a22890,01a22848)
QQKN 00697109 (017bb4f0,00000000,00f039d0,00f039d0)
QQSH 0027c47b (017bb4f0,0161b9d8,00000000,017bb4f0)
QQKN 0067f24f (01619c14,017bb4f0,f34a8eb8,046bffb8)
QQKN 0067e2d5 (01619c14,00000000,00000000,00f039d0)
MSVCRT 780099ed (00f039d0,00000000,00000000,00f039d0)
KERNEL32 77f04f2c (78009990,00f039d0,00000000,00905a4d)
QQCT 00000000 (00000000,00000000,00000000,00000000)
End of Stack Backtrace
=========================================================
13-Oct-1999 16:50:10: Build: Exception raised of type TimerException and
severity 3: Exception in timer OneWorkingDayTimer (3) will cause an abort
of
process LMSPD (10).
SYSTEM ERROR: Exception in timer OneWorkingDayTimer (3) will cause an abort
of process LMSPD (10).
Class: ErrorException
Error #: [8, 111]
Detected at: ElapsedTimer.PTimer.FinishExpiration()
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
INFORMATION: Stack Trace for Exception:
No 4gl Traceback
Class: qqsp_ErrorDescriptor
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
FATAL ERROR: System segmentation/access violation caught.
Class: qqos_SystemException
Error #: [101, 321]
Detected at: qqos_MainExFilter at 1
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
ERROR: qqlo_LomTaskInitiator::Run: Asynchronous task exiting:
The following error was not on the error stack:
FATAL ERROR: System segmentation/access violation caught.
Class: qqos_SystemException
Error #: [101, 321]
Detected at: qqos_MainExFilter at 1
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
ERROR: TMgr.Terminate: fatal error terminated partitionLori,
Yes. I organize all my film rolls by name. If I import new pictures that don't fit into an existing film roll name I create a new film roll with a name appropriate to the theme of the new pictures. No problem with this.
However, if I import pictures at a later date that I want to move to an existing film roll, there is a problem if scrolling is required to bring the existing film roll into view in the display pane.
For example, I have a film roll called "Flowers & Plants". I later import a roll that contains some pictures that I want to move to the Flowers & Plants roll. The Flowers & Plants roll is not visible in the display pane so scrolling is necessary. I select and drag the new pictures up (the new film roll is always at the bottom of the display pane) to reveal the Flowers & Plants film roll. However, the film rolls scroll by so fast it is virtually impossible to stop on the Flowers & Plants roll's title bar.
This was not a problem with earlier versions of iPhoto on slower Macs. I really appreciate the much improved iPhoto/Mac performance but I wish there were some way to control this aspect.
I hope this helps.
Thanks.
Mike -
Position can move from one organisational unit to another.
hi,
position can be moved from one organisational unit to another
or a person should move from one organisational unit to another.
regards,
shrutiu have to move the position as the person is holder u have to move the position form one org unti to another
check PP01 in detailed maintainence
assign a position number which u have created and which has assigned to one orgunit
and hire an employee and assign that positon number
now check with that position number and go to PP01 detailed maintianec
give the position number go to relationship there give ur orgunit to which u want o move and assign the relationship
still have dounbts i will send u the doc
Edited by: Sikindar on Sep 17, 2008 4:01 PM -
Transfer Employee From one Business group to another
Hello,
As per my understanding we do have a functionality of transferring employee from one business group to another. Can any one tell me the exact steps for the same. It is there from 11.5.10 and the profile setting we have to set is HR: Propagate Data. Can anyone tell what from here I need to do for a transfer for employee between business group.
Thankshello Pdelapena,
Benefit tab is not available for all BG responsibility, like india is not having the benefit tab.
Secondly if i want to go for some Long range compensation say an employee has worked for 2 yrs then he is eligible. Now technically speaking the the transfer employee should be eligible for the same. But if we terminate him and then hire him back in the new BG only the thing that is same is Party_ID apart from that is nothing same. Can you please put some suggestions.
Eg: Person Hired on 10 Jul 2007 in US BG
Person Transferred to India BG on 20 Jul 2008
Now the company plans to give a compensation to all the employee who have been part of the company for 2 yrs or plus till 20 Jul 2009
Now this particular employee will not be pulled out in the eligibility criteria.
Can any one please pass there comments
Thanks
Nitin -
Moving personalization from one instance to another.
Hi All,
Could anyone guide me with the steps of moving personalizations from one istance to another..
I tried this syntax..
FNDLOAD <userid>/<password> 0 Y DOWNLOAD $FND_TOP/patch/115/import/affrmcus.lct <filename.ldt> FND_FORM_CUSTOM_RULES form_name=<form name>
what could be the filename.ldt location,
should i execute this from putty on unix box...
Regards, Ashish
Edited by: Ashish on Aug 30, 2010 9:59 AMAshish,
I am followin that document, but it does not tell me where do i execute the script.. Please if you could..Run the command on the server as applmgr user and after sourcing the application env file. You can run the command anywhere provided that the directory is writable by applmgr user.
Thanks,
Hussein -
Transferring an Employee from one Company Code to Another Company Code
Dear All,
we are implementing the HR Implementation for the group of Hospitals, each hospital being an Individual Legal entity, but there is a requirement, where in there is a possibility that the employee may be transferred from one Hospital to other on a short term basis or on a long term basis, and as long as the Employee stays in that transferred place, his salary is to be paid from that particular Hospital,
As per my understanding, we have to run the seperation action and then go for a hiring action in the new company,,, but this wouldnt solve the purpose if the employee works for 10 days in a month in one Hospital and the rest in the Other Hospital...
I have come across various posts on sdn regarding the same issue that it is possible, but i didn't find the end result for this one,I would request you to provide me with your inputs on this one.
Regards,
BharadwajHi ,, I am aware that we need to execute a transfer action, but how can we transfer an employee from one company code to another??? let me explain you with my scenario here....
HOSPITAL-1 : XYZ1 ( Company Code)
HOSPITAL-2 : XYZ2( Company Code)
Hospital 1 (XYZ1) and 2(XYZ2) belong to the XYZ Group of Companies
both these hospitals are separate legal entities
an Employee "A" is working in a Hospital 1 ( XYZ1) from 1st of a month till 10th and from 11th onwards he is working in Hospital2(XYZ2).
if i want to transfer an employee internally from one Personnel Area to another Personnel area or from one org unit to other org unit then i can do it through transfer actions, but how am i supposed to do a transfer action in between two company codes? -
Need to transfer more than 150 employees from one company code to another company code
Dear Sir/Madam,
I am new in SAP HCM . We need to transfer more than 150 employees from one company code to another company code due to some business requirement. Please suggest the process of transfer from one company code to another company code considering the other element like gratuity , leave entitlement, Bonus , Exgratia etc.
Your quick response will be highly appreciated.
Thanks & regards,
Babuna Ray
Mob:- 9007295305
[email protected]Dear,
do not transfer employee from one company code to another issues are as under.
1. Employees Form 16 you will get wrong value as per I Tax law because of company is having different PAN & TAN.
2. Form 24 Q annual return data will not get properly/easily from SAP because of form 24 Q will run on Payroll area base/ company code base
3. PF number is different for these 2 company codes then you are unable to submit annual return.
4. If employee will get hike after the transfer case then system will post expenses period wise means if employee is having 2 different cost center related 2 different company codes posting will done as per this scenario is it accepted to Account Depatment? it is reflected in FICO through KSBB how can they manage expenditure which is related to previous month?
Like this many points are there you have to study it and then suggest to your client.
Regards
Subhedar
9158881202 -
Transferring of employee from One Company Code to Another company code
Hi Friends,
There is already configured SAP HR solution for say 1000 Company code, Now I am implementing for another company code 2000, Client has requirement to transfer employees from 1000 ( company code ) to 2000 ( company code ).
Country is UAE (Gratuity / Pension legal calculation)
According to me as company code is an legal entity, We need to resign the emplyee in one company code and hire him in another company code. What you say? OR any best SAP Preactice ?
Thanks
JayHello Jay,
You need to have different PAs for different company codes and assign those PAs to the respective company codes (check IMG: Enterprise Structure -> Assignment -> Human Resources Management -> Assignment of Personnel Area to Company Code).
Now you need to run action (transfer or org reassignment) wherein you will change the existing PA (belonging to one company code) to another PA (belonging to different company code). This way the employee master in IT 0001 will show different company code from the date of such action
Goto PA40, choose Transfer actionChange Info group
0001 COP
0006 COP
0009 COP
0007 INSS
0008 COP
0014 COP
0015 COP
0588 COP
OR
Perform the action Organizational reassignment in PA40 for that employee and change the personnel area. by changing the personnel area the company code will cahnge automatically
regards, -
How can I script moving paths from one file to another?
Hello. I have 1 image with various color correction layers. The other is the exact same size but only contains paths. How can I script moving paths from one file to another? Thanks, in advance, for any help you can offer. Thanks!
Thanks! This one actually worked for me. Thanks for your help.
http://forums.adobe.com/message/3305389#3305389 -
This may be something easy but for some reason I am having a hard time figuring this out. Basically this is the situation: I have a library on my MBP hd that I import pictures to when I am not hooked up to my external hd for the time being. The main library is of course on the external 2tb drive. How do I have 2 libraries open so that I can essentially drag and drop the pictures from one library to another? It would basically be like moving files from one project to another. Thanks for any help!
Always keep a backup of your original images, before you delete them. I make a backup right form the card, before I even import them to Aperture.
How are your images stored right now? Are the referenced or managed? On your big volume I'd consolidate the newly imported images, to be sure they are really inside the Aperture library before I delete any images outside the library.
but they have the little yellow triangle caution symbol on them and I can see them but not really edit them
That is a very typical problem, when you imported your images as referenced images then somehow delete or move the original master image files, that are stored outside the Aperture library.
Do you still have the original masters of the images with the yellow triangle that you cannot edit? In Aperture 3 you can point Aperture to the location of the master image file "File >Locate referenced image" - probably Aperture 2 has a similar command to let you reconnect your masters, if you still have them. Look into the manual. -
Moving Image from one Review to Another?
I attempted to upload an image (open in Photoshop) to a specific review. However, I could not see the desired review in the Photoshop CS Review panel. Out of frustration - after attempting to "find" the desired review for several minutes - I uploaded the image to another review and then went online, using Safari, to Acrobat.com.
There is no visible means of moving an image from one review to another. There is a way of dragging one review (with all sub-images) to another location. But I can't see a way of moving a sub-image from one review to another review.
IF there is some "magic" that someone knows I would sure appreciate some education.This works quite well for a single image review. I've moved them from one workspace to another. The issue is when a review has multiple images and you want to take only one of them from that review and move it to another review in another workspace; I can't seem to get that to work at all.
When I open a review and navigate to the desired image, then click in the lower left corner and select a new workspace to move the image to, it moves the entire review - not the single image - to the new workspace.
I guess I could delete the "part" from the workspace it currently exists in and then create it as a stand alone review, but then I won't be able to imbed it into another review as I want to do.
The source frustration here is that I can't get CS Review in CSPS5 to navigate to the desired workspace/review. I get "ALL REVIEWS" displayed but not the workspaces... Any ideas on how to display workspaces instead of reviews? -
Moving Itunes From one computer to another
HI,
Can anyone offer advice for moving Itunes from one laptop to another? The original laptop that has my itunes on it, has broke, it froze and will not operate. Rather that lose all my purchased music and playlists i would like to swap it to another laptop. Can anyone advise if this will be possible and how to do it? Both laptops have windows XP installed
thanks
ArleneHi
I am having a similar problem- when I record from Itunes to a cd it only works in "Data cd" format in the advanced tab. That's okay, but when I re-insert the cd and try to import it, it doesn't show anything- it plays in Itunes okay. There aren't any little boxes to check for selecting any songs and if I try to use the import function, it shows as blank.(file type shows as .txt) I am using Itunes 6- would Itunes 7 help this?
thanks- I have a lot of music to transfer and this is a problem.
Max
Maybe you are looking for
-
How do I share my entire music library with my other computers?
Only a subset of my library is listed under my Shared Library. I have tried changing the settings under Preferences: Sharing to include the Entire Library, as well as dragging and dropping the contents of the entire Library into the Shared Library.
-
Closing tag in xml transformation
Hi experts, I have the following ABAP code: ABAP itab to XML string CALL TRANSFORMATION id SOURCE data = ti_stocks[] RESULT XML ps_output. The result in ps_output should be an xml like this <?xml version="1.0" encoding="
-
HI..... I HAVE COMPLETED SAP FICO MODULE .... I WANT TO CONFIGURE PROCURE TO PAY CYCLE. CAN ANY ONE PLS TELL ME THE FULL PROCESS OF CONFIGURING THIS CYCLE WITH T CODE. REGARDS AMITAVA
-
Hi experts, how can I handle it to exporting a table from a structure from a methode? At the moment I export the structure in the methode but I need to export a table. At the moment: Parameter Type Typing Methode Associated Type param_1
-
Illustrator CC 2014 hos stopped working
I'm just starting Illustrator CC 2014 but application stopped message this below. "Illustrator CC 2014 hos stopped working" Faulting application name: Illustrator.exe, version: 18.1.0.430, time stamp: 0x54247b91 Faulting module name: MSVCR110.dll, ve