Steps to uninstall from iMac (Intel Core i7) MacKeeper 1.8.1

What steps should I take to uninstall from iMac (3.4 GHz Intel Core i7 with OS X 10.9.4 /  8 Ram) MacKeeper 1.8.1? I saw something similar on the site, but it's a different version not stored in the Library files. Instead MacKeeper is in the Applications file, so can I just dump it in the trash to be gone with it or do I have to have an uninstaller? Thanks!, and sorry if this is a redundant question.

How to Remove MacKeeper
Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide and The Safe Mac » Adware Removal Tool. Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
  Mac OS X Snow Leopard and malware detection
  OS X Lion- Protect your Mac from malware
  OS X Mountain Lion- Protect your Mac from malware
  OS X Mavericks- Protect your Mac from malware
  About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
     is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

Similar Messages

  • Updates from Mountain Lion 10.8.3 to 10.8.4 on my iMac Intel Core i7 are giving me problems.

    I recently updated my Mountain Lion 10.8.3 to 10.8.4 on my iMac Intel Core i7. Now I am experiencing all sorts of problems.
    1. It won't recognize my phone: Under the last OS I used to just plug in my phone and it would automatically recognize it and give me a desk icon. Now, nothing. I am forced to use bluetooth, which is so time consuming, to off load my photos. I even tried lauching iPhoto first and then plugging in my smart phone, and it would not recognize it.
    2. Clicking on files or folders on the desktop acts as if I have the shift or command key engaged and highlights all the ones I clicked on, instead of just releasing the last file I clicked on when I click on the next file.
    3. My mouse keeps disappearing all of a sudden. So I have to keep moving my mouse around until the cursor finally becomes visable.
    4. Some applications, when clicked on in the dock, open a new window as if the computer has lost the path as where to find the original except I don't get an error message saying the alias needs to be fixed. It just opens Applications.
    These are the most annoying things that are happening since I have upgraded my iMac. Number 1 is the most important thing now as my videos are taking hours to off load.
    Any help would be appreciated.

    Hi Eric... I restarted my iMac in Safe Mode. It gave me the option of Me or Guest. I chose Me. It started up. I ran Disk Utility and I noticed that the repairs of permissions were focused on my scanner and printer. Nothing else. Restarted. Noticed that the mouse issue is fixed. Yay! Folder issue is fixed. Yay! Application/path finding also seems to be back to normal. Yay!
    My Smartphone will still not mount. Disk Utility did not recognize the phone. Going into About This Mac showed me that it can recognize the phone via Bluetooth. Under About This Mac>Hardware>USB, it also sees the phone. So why is it not mounting like before? Or what is the next step? I read those articles you attached in your initial response.
    betty

  • How do i back up my files from an intel core duo imac to an external hard drive?

    Hello
    How do I back up my files from an intel core duo imac to an external hard drive?

    Like you do with any other Mac*:
    http://www.macmaps.com/backup.html
    Note: if you have a CoreDuo, you can only upgrade up to 10.6.8.  Only Core2Duos and higher can go to 10.7 (Lion).

  • IMac Intel Core 2 Duo Airport Latency Issue

    I've got a iMac Intel Core 2 Duo 2.5Ghz
    Model Name: iMac
    Model Identifier: iMac7,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 3 GB
    Bus Speed: 800 MHz
    Boot ROM Version: IM71.007A.B03
    SMC Version (system): 1.20f4
    Software Versions:
    Menu Extra: 6.2.1 (621.1)
    configd plug-in: 6.2.3 (623.2)
    System Profiler: 6.0 (600.9)
    Network Preference: 6.2.1 (621.1)
    AirPort Utility: 5.5.2 (552.11)
    IO80211 Family: 3.1.2 (312)
    Interfaces:
    en1:
    Card Type: AirPort Extreme (0x14E4, 0x88)
    Firmware Version: Broadcom BCM43xx 1.0 (5.10.131.36.1)
    Locale: ETSI
    Country Code: GB
    Supported PHY Modes: 802.11 a/b/g/n
    Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
    Wake On Wireless: Supported
    Status: Not Associated
    I get very odd ping results :
    PING 192.168.10.1 (192.168.10.1): 56 data bytes
    64 bytes from 192.168.10.1: icmp_seq=0 ttl=255 time=308.961 ms
    64 bytes from 192.168.10.1: icmp_seq=1 ttl=255 time=24.379 ms
    64 bytes from 192.168.10.1: icmp_seq=2 ttl=255 time=150.639 ms
    64 bytes from 192.168.10.1: icmp_seq=3 ttl=255 time=71.886 ms
    64 bytes from 192.168.10.1: icmp_seq=4 ttl=255 time=300.769 ms
    64 bytes from 192.168.10.1: icmp_seq=5 ttl=255 time=222.342 ms
    64 bytes from 192.168.10.1: icmp_seq=6 ttl=255 time=143.709 ms
    64 bytes from 192.168.10.1: icmp_seq=7 ttl=255 time=65.389 ms
    64 bytes from 192.168.10.1: icmp_seq=8 ttl=255 time=295.895 ms
    64 bytes from 192.168.10.1: icmp_seq=9 ttl=255 time=215.486 ms
    64 bytes from 192.168.10.1: icmp_seq=10 ttl=255 time=137.251 ms
    64 bytes from 192.168.10.1: icmp_seq=11 ttl=255 time=58.463 ms
    64 bytes from 192.168.10.1: icmp_seq=12 ttl=255 time=287.227 ms
    64 bytes from 192.168.10.1: icmp_seq=13 ttl=255 time=208.830 ms
    64 bytes from 192.168.10.1: icmp_seq=14 ttl=255 time=130.264 ms
    64 bytes from 192.168.10.1: icmp_seq=15 ttl=255 time=51.747 ms
    64 bytes from 192.168.10.1: icmp_seq=16 ttl=255 time=280.527 ms
    This happens approx 10 mins or so after restarting the machine.
    The IP i'm pinging is the router on my network. All other machines that ping to this IP are returning around <5ms pings so I know it's not the router.
    When I connect via ethernet I get <5ms as well so I know it's not another program on my mac causing issues.
    I've tried connecting wirelessly to an Airport Extreme, Airport Express and directly to the Netgear DG384 wireless box, they all have the same issue.
    Any help out there!?
    Thanks
    Alaistair

    Update- I deleted HP via Hp uninstall and also did a search on HD and deleted anything that siad HP. Reinstalled HP prpgram via original CD, then downloaded and installed OS 10.6 drivers and software from HP website then ran Apple software update and it updated 2 files and restarted the computer. The HP photosmart studio still did the same thing running very slow and not responding to clicking on any command. I called HP and they don't have Apple support on Sundays. Not sure if they will ever help me b/c I don't have extended service plan or they want to charge me. Apparently fro do google searches, they have been problems with the software and OS X 6-Snow Leopard. It's funny, I can print but just not use the photosmart software anymore. The problem seams to have worsened after I made a picture DVD using iDVD.- Where does iDVD get installed from? It's not part of iLife. I may uninstall iDVD and reinstall if I know where I got it from and see if that helps. I did run iPhoto yesterday and except for taking a long time to import my photos (hours for 1,600 picutres), it seems to run fine, so I can use that as long as I can use the printer to print and scan. I uninstalled HP again and was going to try reinstalling and only doing the Apple software update after and see if that chances anything. I will try calling HP after I have the software back on my computer. If I do decide to buy a new printer=- any suggestions?
    Thanks
    Michele

  • My imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I've

    my imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I’ve tried shutting it down and unplugging it, and that does not work -- I’ve run disk utilities checked permissions, and run anti-virus and get no adverse results – I cannot figure out what is different that causes this problem

    From previous experience 3 indicates a shutdown initiated by the SMC (System Management Controller) — hardware responsible for many low-level functions including power, sleep, lights, and fan activity.
    Try resetting it:
    Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
    Before Resetting the SMC
    Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
    Press Command + Option + Escape to force quit any application that is not responding.
    Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
    Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
    Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
    Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.

  • Imac,Intel Core i7 on OS 10.9.3 maintenance recommendations

    What are the maintenance recommendations for an Imac,Intel Core i7 on OS 10.9.3 .

    Kappy's Personal Suggestions About Mac Maintenance
    For disk repairs use Disk Utility.  For situations DU cannot handle the best third-party utility is: Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption. Drive Genius provides additional tools not found in Disk Warrior for defragmentation of older drives, disk repair, disk scans, formatting, partitioning, disk copy, and benchmarking. 
    Four outstanding sources of information on Mac maintenance are:
    1. OS X Maintenance - MacAttorney.
    2. Mac maintenance Quick Assist
    3. Maintaining Mac OS X
    4. Mac Maintenance Guide
    Periodic Maintenance
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) See Mac OS X- About background maintenance tasks. If you are running Leopard or later these tasks are run automatically, so there is no need to use any third-party software to force running these tasks.
    If you are using a pre-Leopard version of OS X, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced after Tiger.  (These utilities have limited or no functionality with Snow Leopard, Lion, or Mountain Lion and should not be installed.)
    Defragmentation
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive except when trying to install Boot Camp on a fragmented drive. Malware Protection
    As for malware protection there are few if any such animals affecting OS X. Starting with Lion, Apple has included built-in malware protection that is automatically updated as necessary. To assure proper protection, update your system software when Apple releases new OS X updates for your computer.
    Helpful Links Regarding Malware Protection:
    1. Mac Malware Guide.
    2. Detecting and avoiding malware and spyware
    3. Macintosh Virus Guide
    For general anti-virus protection I recommend only using ClamXav, but it is not necessary if you are keeping your computer's operating system software up to date. You should avoid any other third-party software advertised as providing anti-malware/virus protection. They are not required and could cause the performance of your computer to drop.
    Cache Clearing
    I recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, Mountain Lion Cache Cleaner 7.0.9, Maintenance 1.6.8, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc. Corrupted cache files can cause slowness, kernel panics, and other issues. Although this is not a frequent nor a recurring problem, when it does happen there are tools such as those above to fix the problem.
    If you are using Snow Leopard or earlier, then for emergency cleaning install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. (AppleJack works with Snow Leopard or earlier.)
    Installing System Updates or Upgrades
    Repair the hard drive and permissions beforehand.
    Update your backups in case an update goes bad.
    Backup and Restore
    Having a backup and restore strategy is one of the most important things you can do to maintain your computer. Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. You can never have too many backups. Don't rely on just one. Make several using different backup utilities. My personal recommendations are (order is not significant):
         1. Carbon Copy Cloner
         2. Get Backup
         3. Deja Vu
         4. SuperDuper!
         5. Synk Pro
         6. Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance and backup and restore.
    Always have a current backup before performing any system updates or upgrades.
    Final Suggestions
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity or 20 GBs, whichever is greater, as free space. Avoid installing utilities that rely on Haxies, SIMBL, or that alter the OS appearance, add features you will rarely if ever need, etc. The more extras you install the greater the probability of having problems. If you install software be sure you know how to uninstall it. Avoid installing multiple new software at the same time. Install one at a time and use it for a while to be sure it's compatible.
    Additional reading may be found in:    
    1. Mac OS X speed FAQ
    2. Speeding up Macs
    3. Macintosh OS X Routine Maintenance
    4. Essential Mac Maintenance: Get set up
    5. Essential Mac Maintenance: Rev up your routines
    6. Five Mac maintenance myths
    7. How to Speed up Macs
    8. Myths of required versus not required maintenance for Mac OS X
    Referenced software can be found at CNet Downloads or MacUpdate.
    Most if not all maintenance is for troubleshooting problems. If your computer is running OK, then there isn't really a thing you need to do except repair the hard drive and permissions before installing any new system updates.

  • How can i update my old 2006 iMac Intel core 2 duo running 10.6.8 to OSX Lion so that I can sync using iCloud with my newer devices?  Mountain Lion is not an option for my older model and Lion is no longer available at App store.

    How can i update my old 2006 iMac Intel core 2 duo running 10.6.8 to OSX Lion so that I can sync using iCloud with my newer devices?  Mountain Lion is not an option for my older model and Lion is no longer available at App store. 

    Call Apple's online store's telesales agents: 1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775. For Lion you'll get a redemptions code via e-mail and need to DL from the Mac Apple Store (requires SL 10.6.6+).

  • 20" iMac Intel Core 2 Duo Display problems.

    It was hard trying to sum up my problem for the thread title... so let me try and describe what I am experiencing a bit more clearly.
    I have recently acquired a 20" iMac Intel Core 2 Duo,2 GHz(aluminum body black plastic back)-with display issues...
    The problem is basically that there appears to be no happy middle ground in regards to contrast- it is either WAY too white or WAY too black... I would have to say it is more of an issue with CONTRAST than brightness, it appears that nothing I can do in calibrating the screen really matters.
    I have calibrated displays before and never had this sort of issue. It is pretty bad (for example): a royal blue appears as black or gray mac highlight color choice appears as black.... white and medium grays appear indistinguishable.
    all this in addition to the fact that there appears to be a gradient to the screen when you display a solid color neutral back ground, not too mention that it is VERY hard to look at this screen for very long and for what I do( 3D model making and texture creation) the display is pretty useless.
    I have read about similar issues with this model's screen at other sites, but most of the threads ended without being resolved and were more than a year old.
    This machine belonged to my in-laws and according to them, it always looked this way and when they took to back to the Apple store few weeks after purchasing it( brand new), they were told there was "nothing wrong with the display, it's supposed to look that way"... the machine was hardly used(just for iChating with our infant daughters), so I don't really think it is an issue with age or anything.
    Now here is the really weird part:
    I just upgraded the OS from 10.4 to 10.5 and when the machine first displayed the default 10.5 background(the Nebula one... blueish-pink with stars)... as it was going though the start up IT LOOKED RIGHT.
    Once everything was done and all my icons appeared- Boom! Back to ugly.
    I have noticed the same thing occur if I shut down the machine.
    Startup screen, the default (nebula)background(my choice of background) comes up... it looks fine, the icons start to show up... everything still looks good and then when everything is done... BAM! UGLY!
    I'm not sure what to make of this... any suggestions
    One last thing- I am VERY familiar with the default background for OS 10.5, I have used it on my iMac G5 for over 2 years. When I say the displayed "looked right" I mean, it looked like what I was used to and how it appears on other machines.
    Thank you in advance for any help or suggestions.

    mcgyver,
    If start up and shut down look correct then something is set or corrupt in the user options. To test this, add a new user and signon as them.
    Regards
    Edit: I don't use 10.5.8 anymore so the following suggestions are for 10.6.5.
    The things that may affect your display are:
    System Preferences > Universal Access > Seeing Tab. Display: Make sure Enhance contrast slider is set to normal. Use grayscale is unchecked.
    System Preferences > Displays > Color tab > Display profile set to display or iMac. Whatever the default is on your system.
    Message was edited by: captfred

  • Can I upgrade to an Intel core 2 Duo processor from my Intel core duo processor ? If so, what all must be replaced.

    Can I upgrade to an Intel core 2 Duo processor from my Intel core duo processor ? If so, what all must be replaced. imac
    <Edited by Host>

    No CPU upgrades possible.
    You should not post your serial number or other personal information in this forum.

  • Quark 6.5 crashes when opening existing files on iMac Intel Core Duo

    I just switched from a G4 titanium laptop to an Intel iMac and Quark works fine except when I try to open a file that I created on the laptop (same Quark 6.5). It crashes. I talked to Quark and they said that I need to open the files on a PC and resave (I don't have a PC or a friend with a PC and Quark not that I'd send them all my files even if I did). I've tried resaving and renaming files with no luck. I tried reinstalling both the operating system and Quark (both 6 and 6.5) with no luck. Has anybody else had this problem and found a work around? I want to sell my laptop but I can't until I know I can access the hundreds of client files I have there.
    iMac Intel Core Duo   Mac OS X (10.4.6)  

    Sorry I have no real experience with this, just a thought. Did you use migration assistant to move the old files over from your G4 to your Intel? And did you then perform a "Repair Disk Permissions" upon the entire hard drive from within Disk Utility's "First Aid" panel? (located at Applications>Utilities>Disk Utility)
    If the file move still is causing you a problem afterwards, you could try and work around it by moving the files in a different way. As a test, create a small file on the G4 and then email it to yourself from the G4. Receive that message into the Intel and see if the Intel can then open the file from inside Mail. This might avoid any "bias" created during the move from old to new Mac.

  • IMac Intel Core Duo Hard Drive Replacement

    I may need to replace my iMac (Intel Core Duo) HD soon; I'm wondering whether the Geek Squad does work on Macs. Also, is this something a person can do themselves with good directions, or is that risky. I've put in memory, but think the HD is probably a step up. I have everything backed up and would get all my stuff back on HD myself. Has anyone had experience with Mac repair here?
    Solved!
    Go to Solution.

    Welcome, Selia!
    We certainly do work on Macintosh computers.  The criteria is: "Is the part user-serviceable?"  We would need to sendthe unit in for upgrade to our repair center if it is not something Apple has in their DIY section of their website.  This is toensure consistency and to avoid any issues if still under warranty. Typically only Mac Book laptop hard drives areserviceable in the store.
    Either way, I recommend letting an Agent assist you in the store.  Let us know if you need further answers.
    Matthew|Community Advocate | Best Buy® Corporate
    Visit our Channel on
     Private Message

  • IMac Intel Core Duo: Which Install DVD disks should I be looking for?

    I have an iMac Intel Core Duo (2 Ghz, 20") model. This was sent to me from Apple as a replacement for my iMac G5 when it had problems a couple years ago. I just realized today that they did not send me OS install disks for it; I still have the iMac G5 install disks though.
    What iMac install disks should be looking for to purchase? Are they specific to an Intel Core Duo? Would any iMac Intel installation disk work?
    Thanks in advance.

    You may be able to contact Apple and have them provide a replacement set for a nominal fee.
    If it's the Core Duo white iMac from +early 2006+, it came with Tiger (10.4). Therefore, you can get install Leopard or the current Snow Leopard on it. You just need the standard retail disc.
    Would any iMac Intel installation disk work?
    Usually, installation discs that come with Macs (the grey ones) only work with that specific Mac model. A retail disc (the ones that are sold separately) will work with any supported Mac model.
    There is another difference. The disc that is included with Macs also have additional bundled apps, such as the iLife suite. The original included disc for your iMac would have iLife '06, which is two versions old, so it may not be that much of a benefit today (iLife '09 is the current version).

  • IMac intel core 2 duo cant conect wireless

    hi, I have an iMac intel core 2 duo and I cant get it wireless, the iMac detects the network but when I write down the WEP password it just says that an error occurs. Also it doesnt detect other mac computers. But with an ethernet cable works fine and my macbook pro have no problems with the wireless network

    Hi
    My problem was semi-solved when I realised my wireless router firmware wasn't up to date. So I updated the firmware and now my imac no longer gets the message " There was an error connecting to the wireless network..." BUT the imac still does not detect the network by itself (even thought it's saved under Preferred Networks) - and I am forced to use connect via Airport > Other... on every restart and awakening from sleep.
    Any ideas?
    Thanks, Krishan

  • IMac Intel Core 2 Duo and Lion - Prep work before install

    Thinking of migrating from Snow Leopard to Lion on our 2008 iMac Intel Core Duo.
    Here are my specs
    Processor 2GHz
    4GB RAM
    Graphic ATI, RadeonHD2400 VRAM 128MB
    Looking for any links to avoid any gotchas.  I reviewed and updated all my software via the roaringapps website
    Wondering how other iMac users with my specs favor Lion
    thanks
    JTS

    See: Installing Lion: Our complete guide

  • Upgrading RAM for an iMAC  Intel Core i5 2.8 GHz Quad Core - Late 2012 (I'm guessing).

    I have an iMAC Intel Core i5 2.8 GHz Quad Core - Late 2012 (I'm guessing).  I am trying to upgrade the RAM of my iMAC and I am not sure how to go about it. Running on OSx 10.6.3
    This iMac has 4 slots - Currently my RAM is using 2 slots with 4 GB so I have 8 GB right now. 
    The speed is 1333MHz. Now I have some RAM that could get to 32GB but the 4 RAM chips speed is
    1866 MHz.
    Would it be possible to swap my old RAM (8GB) 1333MHz for the new 1866mhz RAM? even with the difference in speed?  The RAM is from Crucial. 
    If possible I can try and swap the RAM if I get inside my iMAC.

    If you are really running 10.6.3, then you do not have a 2012 machine. Please check to see if this is yours (it's a 2010):
    http://www.everymac.com/systems/apple/imac/specs/imac-core-i5-2.8-27-inch-alumin um-mid-2010-specs.html
    It also mentions the exact specs of the RAM. I would only use the RAM supported by Apple; using the higher speed rated RAM will not result in higher speed.

Maybe you are looking for