SCCM 2007 PXE point role uninstallation

Hi Friends,
I am working on dead line and I have found a solution on forums for PXE boot problems I want to try uninstall WDS and uninstall PXE role unfortunately I did not find any thing which makes sense to me on forums . Can anyone help me to get through the way...?
Appreciate quick response.
Many thanks..
Mo

None of these answer have helped. I have read that same TechNet article too many times over.
I removed PXE service point in configmgr, and awaited a successful uninstall message in PXEsetup.log
Never showed, I've tried everything to get a succssessful uninstall but there is so little information outside of the unhelpful information in this question and the TechNet articles.
Is there a way to rekick off the uninstall? Originally the logs on the parent site server indicated that it would reattempt an uninstall after 60 minutes. However that message is gone after a few days of waiting and now it only gives the error that PXE is
not responding, even though the role is no longer defined in SCCM.
Bottum line I need a sure fire fix to remove PXE.

Similar Messages

SCCM 2007 Distribution Point Share on a Failover Clustered File Server.

Is SCCM 2007 Distribution Point Share supported on a Windows 2008 R2 Failover Clustered File Server? I can get the packages to copy to the DP Share. But if I create them on a non clustered server it works fine. Are there any special settings that need top
be configured for clustered shares?
Thanks,
Steve
Steve

Hi Steve,
As far as I know this scenario is not supported scenario, In Windows Server® 2008 R2, the Cluster Shared Volumes feature included in failover clustering is only supported for
use with the Hyper-V server role.
The creation, reproduction, and storage of files on Cluster Shared Volumes that were not created for the Hyper-V role, including any user or application data stored under the
ClusterStorage folder of the system drive on every node, are not supported and may result in unpredictable behavior, including data corruption or data loss on these shared volumes. Only files that are created for the Hyper-V role can be stored on Cluster Shared
Volumes. An example of a file type that is created for the Hyper-V role is a Virtual Hard Disk (VHD) file.
More information:
Deploying Cluster Shared Volumes (CSV) in Windows Server 2008 R2 Failover Clustering
http://blogs.msdn.com/b/clustering/archive/2009/02/19/9433146.aspx
Backing Up Cluster Shared Volumes in a Failover Cluster in Windows Server 2008 R2
http://technet.microsoft.com/en-us/library/ff182356(WS.10).aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

SCCM 2007 Management Point

Hello ,
With example :
There are 10 clients reporting to ABC management point and I was change to XYZ management point ....!
I removed the Site IP Subnets from ABD and registered into XYZ
I removed System Management Container for the ABC Name
But I am getting updates from ABC only
I want to get from XYZ ....For this anything I need to do help me on the same
Thanks
Best Regard's Krishna

Is XYZ a new MP that is part of the primary site or part of a child secondary site?
A little bit of background and more detail will help us help you.
Jason | http://blog.configmgrftw.com

SCCM 2012 R2 Cu1: Can I reinstall the Reporting Services Point role without delete or change the SSRS-DB?

Hi, I have some issue with the reports,
Can I reinstall the SCCM Reporting Services Point role without delete or change the SSRS-DB (just reset the SCCM SSRS function)?
I have saved/backup the custom made reports.
/SaiTech

Yes you can remove and reinstall the Role. I had to do this recently on our SCCM 2012 R2 due to an issue with the reports not loading. Found out that the problem with reports was from the upgrade to R2 from 2012 SP1 and was able to run
a command to re-register the reports with WMI. I actually removed the role, uninstalled reporting services feature from SQL, deleted the report databases, reinstalled the SQL feature, configured the reporting databases again, added the role back, and
ran the following command.
mofcomp "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof"
This allowed all my reports to register as they should have and run without errors. If you are having similar problems, you may be able to just run that command to get reports running without all the extra work I did. For us we were getting an
invalid Class error in the srsrp.log.
Brian

"Enable distribution-point sharing for this source site" did not showing SCCM 2007 DPs as SCCM 2012 content shares for CM12 clients

Hi
We have one central site server and three primary site servers in SCCM 2007 and completed the SCCM 2012 migration as single hierarchy.
During the migration, We have configured SCCM 2007 Central site server as source hierarchy for data gathering process and configured the "Enable distribution-point sharing for this source site" to make SCCM 2007 distribution points
as SCCM 2012 content shares to serve SCCM 2012 migrated clients. Now we are facing a problem that one of the primary site server's data gathering process did not gather SCCM 2007 DPs even though we configured "Enable distribution-point sharing for this
source site" but data gathering process is completing successfully.
Is anyone have idea, why these SCCM 2007 DPs did not appearing as SCCM 2012 content shares under "Shared Distribution Points"
Thanks in Advance
srkr

Now we are facing a problem that one of the primary site server's data gathering process did not gather SCCM 2007 DPs even though we configured "Enable distribution-point sharing for this source
site" but data gathering process is completing successfully.
Earlier all the shared DPs are showing under Shared Distribution Points ? Or since starting itself these DPs are not showing down? Have you checked migmctrl.log for some clue?
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

SCCM 2012 and SCCM 2007 Shared Distribution Points

I am building a new SCCM 2012 site (primary and 4 secondaries) besides a SCCM 2007 site (primary, 3 secondaries and 65 DPs).
I migrated all objects from SCCM 2007 to SCCM 2012 which worked well.
I migrated a client from SCCM 2007 to my SCCM 2012 environment and that worked well. Then i push some packages from SCCM 2012 to my migrated client which worked as well either.
Then I switch on the SHARED DISTRIBUTION option in the migration section and now my migrated SCCM 2012 client only can access the SCCM 2007 DPs and packages from SCCM 2012 DP can't be accessed anymore...in Software Center the packages will stay at 0% downloading....
Is that normal behavior after enabling shared DPs ?

Did you ever find a solution for this? I am experiencing the same issue.
I have an IP address range boundary for testing SCCM 2012. After enabling shared distribution option SCCM 2012 migrated boundaries from SCCM 2007. My test IP address range boundary has two boundary groups... One is the SCCM 2012 Boundary group
pointing towards the SCCM 2012 DPs. The 2nd is the automatically created "Boundary Group for SCCM 2007 distribution point."
With both of those in there I can only push SCCM 2007 packages to the SCCM 2012 clients. SCCM 2012 packages come back in the logs as "Calling back with empty distribution points list." If I remove the automatically created "Boundary Group for SCCM 2007 distribution
point" from the test IP boundary then SCCM 2012 clients will properly download from the SCCM 2012 DPs, but now the SCCM 2007 packages fail to download to the SCCM 2012 test clients.
I assume I have some kind of boundary issue but am at a loss of resolving it. Either that or I have the shared dp concept down incorrectly. Shouldn't I be able to have a boundary that has SCCM 2012 clients that uses the 2012 DP for 2012 content but the 2007
DP for 2007 content while I am migrating?
Thanks for any help
- Ryan

How manually remove a DP in SCCM 2007 ?

Hello,
we had a disaster and our old SCCM 2007 site server is dead.
We already have a SCCM 2012 site server up and running and a old SCCM 2007 distribution point still up.
we need to convert the old DP to a 2012 DP.
How can i manually remove the DP from SCCM 2007 without an access to the console, site server, bd, etc...?
On the DP, Can I just remove all the share and permission?
thanks

If you don't use the 2007 environment any more you can delete the old shares and folders.

SCCM 2007 R2: PXE Service Point Properties: Database Account

Got the following constellation:
Site Server: SRV01 (W2K8 / SCCM 2007 R2)
SQL Server: SRV02 (W2K8 / SQL 2008 )
Deploy Server: SRV03 (W2K8)
Basic Installation worked. Now I try to install DP and PXE Role on SRV03. All servers are member of each other's local admin group (all servers are running in one domain).
I installed WDS on SRV03. Everything's fine. After that I configured PXE role on SRV01 for SRV03 (configured nothing special in this area) WDS stopped on SRV03. After defining a PXE service point's computer account (a domain admin account that is also member of the local admin group of each server) in SCCM admin console on SRV01 for thePXE Role on SRV03 the WDS service on SRV03 able to start.
Looking at SQL Server during my tests I can see that the server account of SRV03 was properly added to the SMS DB with expected PSP_Role.
What is the reason that I'm not able to get the WDS service started on SRV03 without a special PXE service point account?
Thanks in advance for any idea.
Alex

I'm having the same issue, same kind of setup and error in my logs. I'm not able to kickstart the WDS Service of my DP with the computer account. However, if I use the ConfigMgr account it works without any problem. There is no indication that there is
an issue with the computer account's permissions.
I did activate Verbose logging on the DP and when trying to start WDS Service I get the following:
[1948] 19:51:28: WDS Diagnostics Initialized
[1948] 19:51:28: [Profiles] Initialized.
[1948] 19:51:28: [MCSCOPE] Address Range=239.0.0.1-239.0.0.254, Count=254
[1948] 19:51:28: [UDPPorts] Dynamic Port Range: 64001-65000.
[1948] 19:51:28: [RPC] Using Tcp Port 5040 for Rpc Calls.
[1948] 19:51:28: [RPC] Client Impersonation Logging=Disabled
[1948] 19:51:28: [RPC] Host Name: debobnbk02.emea.att.com
[1948] 19:51:28: [RPC] NTLM/Kerberos Spn: ldap/debobnbk02.emea.att.com
[1948] 19:51:28: [RPC] Initialized
[8920] 19:51:28: [RPC] Server Started.
[1948] 19:51:28: WDS VSS Writer Pre-Initialized
[1948] 19:51:28: [BINLSVC][RPC] Registered
[1948] 19:51:28: [BINLSVC] Provider Initialized.
[1948] 19:51:28: [218][WdsImgSrv] -> Initialize
[1948] 19:51:28: [249][WdsImgSrv] -> pInitializeManagement
[1948] 19:51:28: [327][WdsImgSrv] <- pInitializeManagement=c1030104
[1948] 19:51:28: [327][WdsImgSrv] <- Initialize=c1030104
[1948] 19:51:28: [d:\longhorn\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovider.cpp:147] Expression: , Win32 Error=3238199556
[1948] 19:51:28: [WdsImgSrv] Initialization Failed (rc=3238199556)
[1948] 19:51:28: [d:\longhorn\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovhdl.cpp:169] Expression: , Win32 Error=3238199556
[1948] 19:51:28: [WdsImgSrv] Deleted.
[1948] 19:51:29: [WDSMC][RPC][Ep=Registered
[1948] 19:51:29: [WDSMC][RPC][Ep=Registered
[1948] 19:51:29: [WDSMC] Provider Initialized.
[1948] 19:51:29: [1201][WDSPXE] -> CBannedGuids::Initialize
[1948] 19:51:29: [1201][WDSPXE] -> CBannedGuids::Shutdown
[1948] 19:51:29: [1201][WDSPXE] <- CBannedGuids::Shutdown=0
[1948] 19:51:29: [1201][WDSPXE] <- CBannedGuids::Initialize=0
[1948] 19:51:29: [1825][WDSPXE] [d:\longhorn\base\ntsetup\opktools\wds\wdssrv\wdspxe\src\pxeprov.cpp:172] Expression: , Win32 Error=3661
[1948] 19:51:29: [1825][WDSPXE] [SMSPXE] Initialization failed (rc=3661)
[1948] 19:51:29: [1825][WDSPXE] [d:\longhorn\base\ntsetup\opktools\wds\wdssrv\wdspxe\src\pxeprovhdl.cpp:481] Expression: , Win32 Error=3661
[1948] 19:51:29: [1825][WDSPXE] -> CBannedGuids::Shutdown
[1948] 19:51:29: [1825][WDSPXE] <- CBannedGuids::Shutdown=0
[1948] 19:51:29: [1825][WDSPXE] [d:\longhorn\base\ntsetup\opktools\wds\wdssrv\wdspxe\src\pxeprovhdl.cpp:598] Expression: , Win32 Error=3661
[1948] 19:51:29: [1825][WDSPXE] [d:\longhorn\base\ntsetup\opktools\wds\wdssrv\wdspxe\src\pxemain.cpp:201] Expression: , Win32 Error=3661
[1948] 19:51:29: [d:\longhorn\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovider.cpp:147] Expression: , Win32 Error=3661
[1948] 19:51:29: [WDSPXE] Initialization Failed (rc=3661)
[1948] 19:51:29: [1825][WDSPXE] -> CBannedGuids::Shutdown
[1948] 19:51:29: [1825][WDSPXE] <- CBannedGuids::Shutdown=0
[1948] 19:51:29: [d:\longhorn\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovhdl.cpp:169] Expression: , Win32 Error=3661
[1948] 19:51:29: [WDSPXE] Deleted.
[1948] 19:51:29: [d:\longhorn\base\ntsetup\opktools\wds\wdssrv\server\src\wdsservice.cpp:177] Expression: , Win32 Error=3661
[1948] 19:51:29: [Udp] Listen Shutdown.
[8388] 19:51:29: [NetMon] Network Interface(s) Change Notification
[8920] 19:51:29: [RPC] Server terminated (rc=0)
[1948] 19:51:29: [RPC] Listen Stopped.
[1948] 19:51:29: [BINLSVC] Shutting down
[1948] 19:51:29: [BINLSVC][RPC] Closed
[1948] 19:51:29: -> CBannedGuids::Shutdown
[1948] 19:51:29: <- CBannedGuids::Shutdown=0
[1948] 19:51:29: -> CBannedGuids::Shutdown
[1948] 19:51:29: <- CBannedGuids::Shutdown=0
[1948] 19:51:29: [BINLSVC] Deleted.
[1948] 19:51:29: [WDSMC] Shutting down
[1948] 19:51:29: [WDSMC][RPC] Closed
[1948] 19:51:29: [WDSMC][RPC] Closed
[1948] 19:51:29: [WDSMC] Deleted.
[1948] 19:51:29: [d:\longhorn\base\ntsetup\opktools\wds\wdssrv\server\src\ifmonitor.cpp:174] Expression: , Return Value=1 (WSLE=10038)
[1948] 19:51:29: Timer Queue deleted successfully.
[1948] 19:51:29: WDS Vss Writer Shutdown
Doesn't really tell much, but if there is someone who can shed a light on this, or tell me in which direction I need to look...

SCCM 2007 Won't remove Distribution Points in Site Status

I'm working SCCM 2007 and have removed some orphaned Distribution Points by going through and removing any application assigned to them and then removing the roles under the Site Systems Folder.
The Systems then disappeared from under Site Systems but when I look under Site Status, they're still appearing in the list there and I have no option to delete them.
I've tried following this link (http://myitforum.com/myitforumwp/2012/02/10/removing-old-orphaned-site-systems-from-the-sms-and-configmgr-2007-database/) and changing their replication field from a 0 to -1 which removes them temporarily but they always return
into the Site Status.
I can't see them anywhere else in the console, they're definitely not sited under Site Systems so I'm a bit stuck and have 3 sites saying they're in a Critical State in Site Status because the Orphaned Distribution Points are still appearing there and I
can't see how to remove them.
To clarify, I removed the orphaned Distribution points over a week ago so I doubt it's something like waiting for the system to e them. I've tried rebooting the SCCM server and this has made no difference
My list of servers under Site Systems;
My Servers in Site Status;

Execute the following command on the database
Delete from DPinfo where server name like '%DPName%'
It is completely unsupported to delete anything from the CM07 database. Before doing this you should contact CSS directly for support and ONLY with their guidance should you perform this task.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Distribution-Point sharing (SCCM 2007 - SCCM 2012)

I've some problems by gathering data from a SCCM 2007 Hierarchy, into the SCCM 2012 environment.
Gathering Data without enable Distribution Point sharing is successful, enabling Distribution Point Sharing the Process always fail.
In migmctrl.log i recogniced that the process alway stucks on the following Row for about one hour:
[Worker]:                                 Query against Legacy Site , @SourceSiteCode=KR1,
@LastID=KR10001B:                       WITH Block AS
(                          SELECT TOP 2500 ID FROM PkgStatus WHERE ID > @LastID ORDER BY ID
)                      SELECT
ps.ID COLLATE SQL_Latin1_General_CP1_CI_AS AS ID,                          ps.Type AS Type,
ps.SiteCode COLLATE SQL_Latin1_General_CP1_CI_AS AS SiteCode,                          ps.PkgServer COLLATE SQL_Latin1_General_CP1_CI_AS
AS PkgServer,                          ps.Personality AS Personality,
ps.Status AS Status,                          ps.SourceVersion AS SourceVersion,
ps.UpdateTime AS UpdateTime,                          ps.Location COLLATE SQL_Latin1_General_CP1_CI_AS AS Location,
ps.SigLocation COLLATE SQL_Latin1_General_CP1_CI_AS AS SigLocation,                          ps.ShareName COLLATE SQL_Latin1_General_CP1_CI_AS
AS ShareName,                          ps.HTTPUrl COLLATE SQL_Latin1_General_CP1_CI_AS AS HTTPUrl,
ps.State AS State,                          ps.SigURL COLLATE SQL_Latin1_General_CP1_CI_AS AS SigURL
FROM dbo.PkgStatus ps                      JOIN (
SELECT d.ThisSiteCode COLLATE SQL_Latin1_General_CP1_CI_AS AS SiteCode FROM SMSData d                           UNION ALL
SELECT s.SiteCode FROM Sites s JOIN SMSData d ON s.ReportToSite = d.ThisSiteCode AND s.SiteType = 1) s2                      ON s2.SiteCode = ps.SiteCode
JOIN DistributionPoints dp ON ps.SiteCode = dp.SMSSiteCode                          AND ps.PkgServer = dp.NALPath collate SQL_Latin1_General_CP1_CI_AS
WHERE ps.Type != 1 AND dp.Action != 3                          AND ps.ID > @LastID
AND ps.ID <= (SELECT MAX(ID) FROM Block)
And after that this Errormessage appear:
ERROR: [Worker]:                                 Failed to execute:
WHILE (1 = 1)                      BEGIN
MERGE TOP (1000) PkgStatus AS target                          USING   (
SELECT                                ps.ID, ps.Type, SiteCode = @CurrentSiteCode, PkgServer = dps.PkgServerFQDN,
ps.Personality, ps.Status, ps.SourceVersion, ps.UpdateTime,                                ps.Location,
ps.SigLocation, ps.ShareName, ps.HTTPUrl, ps.State, ps.SigURL, SiteCode as SourceSiteCode
FROM #MIG_PkgStatus ps                              JOIN #MIG_DistributionPointSource dps ON ps.PkgServer = dps.PkgServer
WHERE ID in (SELECT PkgID collate SQL_Latin1_General_CP1_CI_AS from dbo.SMSPackages_L)                             )
AS src                          ON
(target.ID = src.ID AND target.Type = src.Type AND target.SiteCode = src.SiteCode AND target.PkgServer = src.PkgServer AND target.Personality = src.Personality) -- TODO: Ensure we match an index
WHEN NOT MATCHED THEN                              INSERT (ID, Type, SiteCode, PkgServer, Personality, Status,
SourceVersion, UpdateTime,                                      Location,
SigLocation, ShareName, HTTPUrl, State, SigURL)                              VALUES (src.ID, src.Type, src.SiteCode,
src.PkgServer, src.Personality, src.Status, src.SourceVersion, src.UpdateTime,
src.Location, src.SigLocation, src.ShareName, src.HTTPUrl, src.State, src.SigURL)                          WHEN MATCHED AND (
target.Status != src.Status                              OR target.SourceVersion != src.SourceVersion
OR target.UpdateTime != src.UpdateTime                              OR target.Location != src.Location
OR target.SigLocation != src.SigLocation                              OR target.ShareName != src.ShareName
OR target.HTTPUrl != src.HTTPUrl                              OR target.State != src.State
OR target.SigURL != src.SigURL                              ) THEN
UPDATE SET                                  target.Status = src.Status,
target.SourceVersion = src.SourceVersion,                                  target.UpdateTime
= src.UpdateTime,                                  target.Location = src.Location,
target.SigLocation = src.SigLocation,                                  target.ShareName = src.ShareName,
target.HTTPUrl = src.HTTPUrl,                                  target.State = src.State,
target.SigURL = src.SigURL                          WHEN NOT MATCHED BY SOURCE AND EXISTS(
SELECT * FROM MIG_Entity me WHERE me.Type = 2 AND me.ObjectKey = target.ID)                              AND EXISTS
(                                  SELECT * FROM MIG_DistributionPointSource dpsrc
WHERE dpsrc.PkgServerFQDN = target.PkgServer AND dpsrc.SourceSiteCode = @SourceSiteCode
)                              AND NOT EXISTS (
SELECT * FROM MIG_Job job                                  WHERE Type = 3 AND dbo.fn_GetNALPathFromMIGJobConfiguration(job.AdditionalConfiguration)
= target.PkgServer                              )
THEN DELETE ;                            IF @@ROWCOUNT = 0 BREAK
END SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
[Worker]:                 End syncing Distribution Points related tables. SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
[Worker]:         ========== End syncing distribution points ========== SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
ERROR: [Worker]:         System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.     at System.Data.SqlClient.SqlConnection.OnError(SqlException
exception, Boolean breakConnection)     at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)     at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler,
SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)     at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)     at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior
runBehavior, Boolean returnStream, String method, DbAsyncResult result)     at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)     at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ConfigurationManagement.MigrationManager.MigrationRepository.BulkCopyData[T](Snapshot snapshot, LegacyRepository legacyRepository, IntlSqlFormatter formatter, Func`2 watermarkFunc, T lastMaxId, Boolean doNotDrop)     at Microsoft.ConfigurationManagement.MigrationManager.MigrationRepository.BulkCopyData[T](Snapshot
snapshot, LegacyRepository legacyRepository, IntlSqlFormatter formatter, Func`2 watermarkFunc, T lastMaxId)     at Microsoft.ConfigurationManagement.MigrationManager.SyncAgentJob.<SyncDPSettings>d__5f.MoveNext()
at Microsoft.ConfigurationManagement.MigrationManager.ExtensionMethods.<AttachErrorHandler>d__6`1.MoveNext() SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
STATMSG: ID=8610 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_MIGRATION_MANAGER" SYS="<SourceSITESERVER>" SITE=CA1 PID=2348 TID=4516 GMTDATE=Do Nov 07 11:28:33.390 2013 ISTR0=""<SourceSITESERVER>" (CA1)"
ISTR1="<DestinationSITESERVER>" ISTR2="-2146232060" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_MIGRATION_MANAGER 07.11.2013 12:28:33
4516 (0x11A4)
STATMSG: ID=8605 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_MIGRATION_MANAGER" SYS="<SourceSITESERVER>" SITE=CA1 PID=2348 TID=4516 GMTDATE=Do Nov 07 11:28:33.416 2013 ISTR0=""<SourceSITESERVER>" (CA1)"
ISTR1="<DestinationSITESERVER>" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516
(0x11A4)
[Worker]: ==================== Sync Agent Job 16 Ended ==================== SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
ERROR: [Worker]: Microsoft.ConfigurationManagement.Migration.MigrationException: 1 exceptions occurred during syncing.     at Microsoft.ConfigurationManagement.MigrationManager.SyncAgentJob.<get_ExecutionPlan>d__7.MoveNext()
at Microsoft.ConfigurationManagement.MigrationManager.Job`1.ExecuteNext() SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
[Worker]: Start processing status changed event for MIG_SiteMapping.ID=16 SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
[Worker]:         Set the schedule item 16 end time SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
[Worker]:         Set the schedule item 16 status to Failed SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
[Worker]: End processing status changed event for MIG_SiteMapping.ID=16 SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
[Worker]: Disposing Job 16 SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
[Worker]: Removing Job 16 from job manager. SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
[Worker]: Removing the Job with Id 16. SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
[Worker]: Disposing worker SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
[Worker]: Disposing current site connection SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
ERROR: [MigMCtrl]: FAILED to EXECUTE job. error = Unknown error 0x80131500, 80131500 SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
ERROR: [MigMCtrl]: FAILED to EXECUTE job. error = Unknown error 0x80131500, 80131500 SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
In the StatusMessages of Migration_Manager there are the following Errormessage:
The Migration Manager on Configuration Manager site server "<SourceSITESERVER>" was unable to complete the SQL operation on the SQL Server "<DestinationSITESERVER>" of Configuration Manager 2007 due to error "-2146232060".
Thanks in advance

Hi,
1.Please examine reports “All active package distributions” on SCCM 2007 to check whether have package is currently being installed or removed. Then refresh all DPs on SCCM 2007.
After completing these actions above, try to re-gather data.
2.If fail, please check the transaction log both on SCCM 2012 and SCCM 2007 SQL Server. Then, a SQL engineer should be involved in this case.(This forum do not support database issue)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 Application Catalog Website Point role Status is critical

Hi team,
In a client's SCCM 2012 R2 environment there is a Critical Icon and Status against one of two Application Catalog Website point roles. Looking at the Component status, there are no errors and all the components show as green.
Trying to find any warnings or errors in the messages for the Site System role doesnt show any errors, and I tried to reset counts but this has not changed the status.
I am not sure where to go from here. The application catalog itself works and is up. All the services are running. I am unsure as to where this error status comes from or what it pertains to.
Any advice would be appreciated.

Hi,
Please check portlctl.log and awebsctl.log to see if there is any error.
You could also check the thread below.
Symptom: Reporting Services Point Status (under Monitoring - System Status - Site Status) appears as Critical, No error messages in logs or status messages
Cause: 'Status' can be set to "2" for 'SMS SRS Reporting Point' in dbo.summarizer_sitesystem table in sql
Resolution: > Run below query:
update dbo.summarizer_sitesystem set status = '0' where SiteSystem = '["Display=\\abc.local\"]MSWNET:["SMS_SITE=ABC"]\\abc.local\' and role = 'SMS SRS Reporting Point'
> It should set the status back to 0.
> Check in console and errors should go away.
> In case if value reverts back then check below namespace in wmi of site server:
root\sms\site_pri\sms_sitesystemsummarizer
> check the value for reporting services point, ideally it should be 0, let's say it's set to 2 there as well then remove role of reporting services point.
> if entry for reporting services point goes away from both the places then it's good, you can re-install the reporting services point and it should work fine.
> Let's say if value/values doesn't get removed from sql/wmi , remove them manually via queries and then go with uninstall and re-install.
> then it should work and errors in console and common.log should go away.
https://social.technet.microsoft.com/Forums/en-US/5e0b7af6-f00c-4610-a709-f3e0e26505be/sccm-2012-monitoring-site-status-reporting-services-point-status-critical?forum=configmanagergeneral
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Is the distribution point role required on an SCCM 2012 site server?

I am wondering if the distribution point role is required on an SCCM 2012 site server.
We have an installation of SCCM 2012 SP1 with a site server, and two remote DPs.
I would like to remove the DP role from the site server, and stand up another server (2012) at the same location, making it a DP and also have it hold the WSUS content.
I was successful in creating the DP on the new server. I distributed all of our packages to the new server.
I then removed the packages from the DP on the site server, and removed the DP role from the site server.
After making these changes, we lost the ability to deploy packages, either from the new DP server, or from the previously existing DPs that were at other locations.
Deployment status in the SCCM console showed that clients were “waiting for content”.
I found that adding the DP role back to the site server, and distributing packages to it corrected the problem.
Deployment resumed after doing that. Is it necessary to have packages on a DP on the site server?
We want to virtualize the server, and would like to make it as small as possible to facility restores.

Hi,
Have you checked the log file distmgr.log? Maybe it can give us some clues.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Change "Update distribution points on a schedule" in SCCM 2007 via powershell script

Hi
I would like to change the Custom Schedule start time in the "Update distribution points on a schedule" on a package in SCCM 2007 with out logging into the SCCM console.
I have following line code to query the package.
Get-WmiObject
-Namespace
"Root\SMS\Site_$sitecode"
-Query
"SELECT * FROM SMS_PackageBaseclass WHERE PackageID='$PackageID'"
-ComputerName $ServerName
The problem is I only get the "SourceDate" and "LastRefreshedTime" from the query. I am not sure if I change the "LastRefreshTime" that it would change the start time in the Custom Schedule

Hi Jason
I progressed a little bit with you help. I now have the following bit of code.
$Package = Get-WmiObject -class SMS_Package -Namespace "Root\SMS\Site_$sitecode" -Filter "PackageID='$PackageID'" -ComputerName $ServerName
$RefreshPkg = $Package.RefreshSchedule()
$RefreshPkg.RefreshSchedule
I get the following error:
Method invocation failed because [System.Management.ManagementObject] doesn't contain a method named 'RefreshSchedule'.
At line:7 char:1
+ $RefreshPkg = $Package.RefreshSchedule()
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (RefreshSchedule:String) [], RuntimeException
+ FullyQualifiedErrorId : MethodNotFound

Lenovo X1 Carbon PXe boot errors with SCCM 2007

I know there are many posts on this and I've gone through them all, but I am still having issues PXe booting a X1. I have a USB ethernet dongle (the new type with the rounded edge). the part number is 0b67708. It's branded Lenovo but when I pxe it recognises it as ASIX AX88772b. So far so good. It picks up an IP from DHCP ok, recognises the hardware as x64 and then tries to download the \smsboot\boot.sdi file from the SCCM 2007 server. It waits for 20 seconds then falls over with the following:
Status: 0xc0000001 - Info: The boot selection failed because a required device is inaccessible.
Now, I have the the following drivers in the boot.wim file:
x86 -
1. Lenovo USB2.0 Ethernet Adapter 5.12.7.0
2. PCI bus
3. Intel ICHR/DO/DH SATA AHCI Controller
4. Intel USB 3.0 Root Hub
5. Intel USB 3.0 eXtensible Host Controller
x64 -
1. Lenovo USB 2.0 Ethernet Adapter 5.14.4.0
2. PCI Bus
3. Intel ICHR/DO/DH SATA AHCI Controller - 2821
4. Intel USB 3.0 Root Hub
5. Intel USB 3.0 eXtensible Host Controller
I have tried using the ASIX drivers, all previous driver version, adding in the mass storage drivers, adding in the USB 3.0 drivers, praying to the PXe gods but nothing works.
All other hardware works fine. Any suggestions greatly welcomed.
Cheers - Mark.

Make a USB recovery drive before reinstalling.Thats the only option with a preload. With a retail serial number, you can download an iso with the upgrade assistant.
Also, how much ram do you have. If yopu have more than 4GB, you will need 64 bit XP, or the performance will take a hit. I tried XP on my W530, but I had to change several settings in the BIOS/UEFI.
W530(2436-CTO): i7-3720QM, nVidia Quadro K2000M,16GB RAM, 500 GB hard drive, 128GB mSATA SSD, Ubuntu 14.04 Gnome, Centrino Ultimate-N 6300.
Yoga 3 Pro: Intel Core-M 5Y70, Intel HD 5300, 8GB RAM, 128GB eMMC, Windows 8.1, Broadcom Wireless 802.11ac.

Trouble installing Distribution Point in SCCM 2007

Hi
I am experiencing issues while installing DP on a new Windows 2008 R2 server. I am using New Site System Server Wizard to install the DP from my primary site which is SCCM 2007 R3. After the wizard completes, it shows the new server under Site Systems in
the console however there is no info available in distmgr.log and sitecomp.log
Also, it has not created the SMSPKGD$ and other folders it creates after the DP installs successfully. I have also added the Primary site server to the local admin group of the new server however with no success. Not sure if I am missing something or there
are some other logs to check. I have installed DP in the past using same steps however not getting success this time.
Any suggestions.

check hman.log to see that new site system is in use or not? what status it shows under site components?
did you tried to distribute package to this new DP?
Prashant Patil

SCCM 2007 PXE point role uninstallation

Similar Messages

Maybe you are looking for