Still getting error 1602 need help
My girlfriends iphone 4 is in brick mode keeps looping so I have tried holding the home and power button for 10 seconds letting go of the power then restoring it. Didn't work 1602 so I tried putting the newst os on it with shift clicking restore same thing still didn't work. I have tried deleting the host information and putting # infornt of it still nothing. I have tried TU, iReb and a couple other programs and then I get error 21 which is the same error code. Also I have tried all the other trouble shooting methods that the apple website tells me to try.
Please help
There is some help here:
http://discussions.apple.com/thread.jspa?threadID=1343034&tstart=0
Similar Messages
-
Still getting ERROR 1602 when updating.. I've tried everything... HELP!
I have tried the following, and no luck.
- Uninstalling iTunes and Apple Mobile Device, then reinstalling them after reboot.
- Plugging into different USB ports, and blowing dust out of them.
- Rebooting iPhone multiple times.
- Clicking "Restore" instead of "Update". Still get error message.
- Erasing the patch file and re-downloading it.
The only thing I haven't done is call customer support because I hate dealing with stuff like this over the phone. Are there any other options, or should I plan on making a trip to an Apple store?
Thanks for any help guys and sorry about another thread relating to this. I'm just extremely frustrated...There is some help here:
http://discussions.apple.com/thread.jspa?threadID=1343034&tstart=0 -
Help!!!!!! I'm about going out of my mind....Need help loading music to my 1st generation I pod and keep getting error 50 message. I have windows xp and loaded new software last night. This all started when I upgraded to itunes 10 awile ago. My computer recognises my ipod and I think its syncing don't know...My library is intact and can't load any music from my library...purchases...or gene ....itunes 10 wiped my custom play list...and now nothing...I used ipod reset utility to restore my ipod to factory settings and still nothing....I don't have alot of computer knowledge and need someone to walk me threw on what to do. I'm at a loss. And about ready to give up on Apple and the I-tunes experiense....I am in dire need. Help!!!!!!!!!!!!
Hi and welcome to the forums!
A couple of places for you to visit: Blackberry 101 Tips & Tricks
See if this kb helps: http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB12847&slic...
I'm not sure that you saw the error msg. included in the kb, but it discusses removing .msi files from previous installations of DM. Post back and let us know how it goes.
Happy to have you here!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post. -
Getting error message, need help
Hi there, at the moment I have the following query:
select cust_no, cust_address, cust_phoneno
from customer natural join (select cust_no from businesscust minus select cust_no from rental);
This query outputs perfectly fine, with no errors.
However, when I try to change the query to this:
select cust_no, cust_address, cust_phoneno, b.cust_businessname
from customer natural join (select cust_no from businesscust minus select cust_no from rental), businesscust b;
I keep getting an error. Can someone please tell me where I'm going wrong, and where I can fix it? THanx in advance.
Edited by: user12007308 on Oct 8, 2009 10:52 PMHi,
user12007308 wrote:
Hi there, at the moment I have the following query:
select cust_no, cust_address, cust_phoneno
from customer natural join (select cust_no from businesscust minus select cust_no from rental);
This query outputs perfectly fine, with no errors.
However, when I try to change the query to this:
select cust_no, cust_address, cust_phoneno, b.cust_businessname
from customer natural join (select cust_no from businesscust minus select cust_no from rental), businesscust b;
I keep getting an error. Can someone please tell me where I'm going wrong, and where I can fix it? THanx in advance.
Edited by: user12007308 on Oct 8, 2009 10:52 PMSurely, you must know more about the error than that you get one. Don't keep that information from the people who want to help you.
Do you get an error message? Post the complete message, including line numbers.
Are you getting the wrong results? Describe the results you're getting, and what you want. Better yet, post some sample data and the results you want from that data.
It looks like all you've changed is adding a new column to the SELECT clause, and cross-joining the businesscust table. That cross-join would probably produce lmany more rows of output than the original query.
I think you can get the cust_businessname from the same copy of businesscust that you're already joining.
Maybe something like this
select c.cust_no
, c.cust_address
, c.cust_phoneno
, b.cust_businessname
from customer c
join businesscust b ON b.cust_no = c.cust_no
where b.cust_no NOT IN (
SELECT cust_no
FROM rental
WHERE cust_no IS NOT NULL -- Remove if impossible
; -
HT4461 Feb 2014 still getting Error 102 - Please Help!
It's February 2014 and I STILL can't download my mac updates due to Error 102 - please assist! (I'm not a tech savvoy so layman's terms appreciated!) I have a Mac Mini and my current OS is OS X 10.8.4
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps. The Apple Mobile Device driver is loaded and operating. The anti-virus software and firewall are not at fault (were uninstalled, and made no difference). The iTunes on my older machine running Vista does recognize the inoperative iPod (iTunes has detetced an iPod in recovery mode) and allows me to restore the device. Can anyone help to resolve this problem on the Windows 7 PC?
So yu tried all of this:
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
If you had then time for an appointment at ther Genius Bar of an Apple store. -
I have a song that I purchased from Itunes on my Iphone and there was an error downloading. Every time i try to download it times out and says to try again. I have tried several times and still get same message. Help? I have been charged for this song but have not been able to download.
Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
I backed up my movies and rebuild my computer, and after making sure i'm using the latest version of itunes and quicktime and and making sure i still had spare computer authorizations, i still get error 23132. Please help.
I had this exact issue. Spent over an hour on the phone with apple support, they couldn't resolve. Here is what I ended up doing, that worked.
1. Turned iTunes match off on all my iOS devices
2. Deleted the offending playlists from the iOS device they originated on
3. Started iTunes, let it run (literally) for an hour before it became responsive. First thing I did, before clicking anywere else was disable iTunes match. If I clicked anywhere, it would clock for another hour.
4. Let iTunes run overnight, by morning it had cleaned out the repeating play lists. This got my Mac/iTunes back to an operable state.
5. Restore iPhones from backup in iTunes.
What was causing my issue was a single playlist that was created on an iPhone, then suddenly showed up with several thousand duplicates on my other iPhone. The culprit playlist did not, for some reason, duplicate itself on my two iPads. Apple support seemed to think it was because the problem iPhone tried to sync the playlist to iCloud over and over again unsuccessfully, then it finally went through and populated the thousands of blank/failed playlists which then tried to propigate to iTunes and my other iOS devices. Seems like a reasonable theory.
I have not yet re-enabled iTunes match. So, no idea what will happen if I decide to go back down that rabbit hole. -
HT204382 Jfiles, still getting error message that required codec is not available -- Help!
Just installed Telestream to open wmv files, but still getting error message that required codec is not available -- Help!
I'm still getting that same message how did you fix it? i installed the wmv player or Flip4Mac (i'm unsure if thats the same program), but even after i am still getting the pop up saying " The movie ____.avi" can't be opened. What am i doing wrong?
-
Updating to iOS 5, getting error 1602 message...
Hey all,
as like many i've been having trouble updating my iPhone to iOS 5.
I've been getting the error code 1602. I've read online that everyone is getting error 3200 resulting from overloaded servers.
Is the 1602 error happening because of the servers or is this a different error altogether?
Anyone know how to get around this? My phone is currently in Recovery Mode...updates continue to get the same error 1602
Any help would be appreciated!!
Thanks!I have the same problem, error 1602, when trying to update to the latest iOS 5.
I have a Macbook Pro running Windows 7 64-bit, running Kaspersky anti-virus, the new iTunes (12 October 2011), and an iPhone 4 (32 GB).
1) Last night the first problem I had was a failure to backup the iPhone, so I gave up.
2) Today, I managed to backup the iPhone, but then it froze in the Recovery Mode (see image #4 in the 2nd article below), and was unrecognized by iTunes.
- I disabled my Kaspersky anti-virus software (which has caused problems always in the past with all other iPhone iOS updates and downloads)
- I restarted iTunes twice, but it failed to recognize the iPhone
- I did a forced restart (holding the home button + on/off button) and it managed to finally get it recognized, and then it asked to restore, which it is doing.
- It restored to factory settings, and it is now recognized in iTunes again and it is restoring from the backup (5 mins +/-).
- Now it has rebooted and is finalizing the Restore (very long and vague amount of time, depending on the size of data (music, apps, etc) to transfer.
I have clicked through these Apple Support articles already for guidance:
http://support.apple.com/kb/TS1275 - The first support I read, but I knew my USB wasn't the problem.
http://support.apple.com/kb/TS3694#error1602 - The most helpful so far
http://support.apple.com/kb/HT1808 - This is what I then tried, by doing a forced restart
http://support.apple.com/kb/TS1538 - Additional resources if needed
This seems to have worked for now, it is still copying over the content from the backup. I hope it is iOS 5 on it!
Good luck, such an annoying process, I really hate installing the new iOS, there are ALWAYS problems.
DMR. -
I've tried everything. Cloud Cleaner, removed all Adobe products from computer, ran in Administrator Deleted everything still get error code 1 noting in all the troubleshoots have helped.
Error Code 1: "Failed to install" | Creative Cloud Desktop :
https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html -
Still getting error 4310 with itunes 11 when trying to burn a disc (and my comp is new)!!
Help downloaded itunes 11 still getting error 4310 when buring to a disc. the computer is new.
whydoyouneedtoknow wrote:
.... Given the number of people having the same issue, and given that this issue has been around for several years, it's crazy that this isn't fixed.
I concur!! Come on Apple!!! -
Keep getting error 1611on itunes help!!
keep getting error 1611on itunes help!!
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
iTunes: Specific update-and-restore error messages and advanced troubleshooting -
Im getting errors when i do a mem test on my hp a6000f.....ive replaced the ram and still get errors
im getting errors on mem test, Ive replaced the ram, still get errors. How do I disable the L2 cache....on hp a6000f, I dont see anywhere to do it while im in the BIOS/ CMOS setup
I get error code : BIOME-1Here is what you should do to trouble shoot your problem.
Open up the composition that is giving you problems
Your error message tells you that you are having problems with the Shatter effect so select the layer with the shatter effect and turn the effect off
Try a ram preview
If the ram preview is successful add a solid to your comp
Copy your shatter effect and paste it to the new solid you created
Turn off all other layers
Try a ram preview
If the ram preview crashes go back to step 6 and reset shatter and try again
If the ram preview is successful start adding the properties from your original shatter effect until you get a crash.
If the ram preview works the first time you try step 6 then there is something wrong with the combination of shatter and the original layer it was applied to so remove shatter from that layer, pre-compose that layer moving all attributes to the new layer then paste the working shatter from the solid to the pre-comp, turn off the solid and try another ram preview.
Do you kind of get the procedure here. When something is causing a crash first isolate that problem, try it on something simple, then try different things until you can reproduce the crash. Make sure you are saving copies of your project so you can easily go back.
If you can't figure out what settings in Shatter are causing the crash then we need to know everything there is to know about your composition and see a screenshot or the project file. If it is the footage that is causing the crash then you need to transcode, recompress, or in some other way change the format of the footage. There is nothing we can surmise from the details you have given us that give us any clue why shatter is crashing. It usually does not. I can't think of the last time it caused a crash for me. The only possible thing I can think of that would be causing a crash is that the number of particles is causing your system to run out of memory. -
Why am I constantly getting the message that I don't have enough storage space? I have upgraded to the 50GB storage plan and I am still getting the message. Help?
That message refers to storage on your iPhone, not cloud storage. You will need to move content off your phone to make more space.
Maybe you are looking for
-
My mail front the original account has been deleted,i need to send it back!
my original bellsouth account is signed on to my encourage, but when the mail is updated on encourage, the emails automatically get deleted on bellsouth account(if i try to sign onto bellsouth website and check my accounts, it will not work.) please
-
An import updates a date datatype column to sysdate
Hi I couldn't find anything on this issue in the document. I did an export of the data of table1 from database A, in table1 I have a column called CREATEDATE and it has a DATE datatype. When I imported it into database B, all rows now have the curren
-
DB Adapter connecting to DB2 Database is giving Transaction Commit Error
Hi All, I have a simple BPEL process in 11g which executes a select query through the DB adapter in the DB2 database The below is the query select column1,column2,column3 from table1 where column1='123456' During the invoke of the DBAdapter I am gett
-
Is it possible to edit titles?
I'd like to use the Title called "Overlay" but I need for the colored box to go on the right side of the screen due to the photo I'd like to put underneath. Is it possible to move it? I'm not seeing a way to do it.
-
Anyone still having purchased apps not showing up in devices?
Problem since iOS 6. Purchased apps list not showing or crashing on iOS devices.