Still unable to find icons even using getResource()

String ICON = "/Icon/";          // is the directory which contains button icons
String imgLocation = ICON+ imageName+ ".jpg";
URL imageURL = MainFrame.class.getResource(imgLocation);has already been used.
When building the JAR file, I use
jar cvfm PhotoFusion.jar manifest.mf ./
so the entire directory has been included into the jar file.
Anybody can give me a hand?

You probably needURL imageURL = MainFrame.class.getClassLoader().getResource(imgLocation);

Similar Messages

  • HT1414 is it necessary to put in sim card in iphone at the time of restore ? My phone is stolen and i am concerned that if somebody will restore it then i will not be able to find it even using find my phone.

    is it necessary to put in sim card in iphone at the time of restore ? My phone is stolen and i am concerned that if somebody will restore it then i will not be able to find it even using find my phone.

    There is no way that you can locate the iphone at all.
    The thief can restore it and use it as their own.  You will never know or be able to tell what they do with it.
    Very sorry.  Your iphone is gone.
    Report it to the police and change your passwords.

  • Unable to find channel ID - using Test Message in RWB

    Hey all - we are using the Test Message tab of the RWB, and we get "Unable to find channel ID" as the response to our message being sent.  We are clueless what this means... since this is supposed to send straight into the engine, I'd expect something like "no interface determination" or sometimes similar - but we can't figure out what this error means.  This is the message we get, regardless of payload or interface chosen...  We even chose an interface that has already been tested & is running successfully into XI via the JMS adapter, so we know the actual path thru XI is valid. 
    Help is appreciated - I'm sure this is something silly we don't have set up that we need...

    We were hitting the Test tab after clicking the AF in RWB - you should choose the engine... it likes that much better. 

  • WRT160N V2 - Web Browser unable to find home server using server name, IP address OK.

    Hi, I have just got a WRT160N V2, it is working fine apart from one irritating issue. I am unable to browse a web server running on my local network by the computers (servers) name. If I use the IP address it works fine. Viewing my shared files and folders  with Windows Explorer using servers name also works fine. The problem seems to be limited to web browsers, I have tried Internet Explorer and Chrome, neither can find the server using its name, using IP address they can. I have checked NetBIOS settings on all connected computers and they are ok. If I switch back to my old Netgear router the problem goes away. So, it seems it's something specific the the WRT160N. This isn't a huge issue as I can fix by adding a line in the Hosts file. I just wondered if this is a known issue?
    Many Thanks
    Ian

    The first thing that you can try is upgrading the firmware of the router..
    Reset the router for 30 sec , reconfigure the router again and then try to setup the web browser for the server.

  • Firefox 29.0 still showing spinning wheel icon even though I stopped loading the page and the sign beside URL shows that loading has stopped. Is this a bug?

    I have recently updated Firefox to 29.0. I generally keep lot of tabs pinned and whenever I open firefox I stop the unwanted pages from loading. With Firefox even after I stop loading pages, some of them still show the spinning wheel on the tab title. The spinning wheel is shown even though the sign beside the URL shows that the page stopped loading. Though there is technically no problem with this, its annoying to see so many spinning wheels for no reason.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    *In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • HT1277 I have followed this to the letter for an email account that I needed to manually configure and I am still unable to send mail even though I can now receive it.  I have gone through exactly the same process with my iPhone and there seems to be no p

    I am trying to configure my macbook pro to allow mac mail to send and receive via pop and smtp.123-reg.co.uk.  I have managed this today on my iphone but still can only receive but not send from my laptop  Any sugestions?

    Hi mopster555,
    Thanks for the question. If I understand correctly, you are not receiving messages on two iOS devices. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    iOS: Troubleshooting Messages - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • Man this is totally frustrating.. I may jump to another provider - still unable to find my book marks 704-795-1836

    I hate it when you make changes my world was perfect before you made changes.. No i am totally bummed and can not find my internet explorer book marks.....AHHHHHHHHHHHHHHH. today I had a set of task and this change has taken my away from my priorities... come on you can do a better job....704-795-1836 glenn & christine

    I have asked a moderator to provide assistance, they will post an invite on this thread.
    Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
    Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Why am I still unable to open videos even though I have installed the most updated version of Flashplayer?

    I have an IMAC using Safari version 5.1.10.  I have uninstalled and reinstalled flashplayer 5 times now.  I am still getting an error message "blocked plug-in" when I try to launch a video.
    I never had this issue before when installing an updated version of flashplayer

    Welcome to the Apple Support Communities
    One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
    First of all, open  > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
    We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there

  • TS1424 Still unable to connect to iTunes using my IPad, have tried all suggestions still no luck.

    I am unable to update my apps through the app store. I have updated software, synced to my iMac. Still can not connect to iTunes store. Any suggestions?

    Don't know if this has any bearing on the conversation at hand, but I ran into this issue last night. Started when I couldn't purchase anything via Comixology. Which caused a lot of swearing.
    But then realized, that I couldn't get to the Apple store either.
    Figuring that it was my wifi access point being a jerk, I reset that. And "forgot", then reconfigured my wireless.
    Still nothing.
    At this point, I checked our ISP (Charter) to see if they had an outage. They did. DNS servers were hosed. I gave up and went to bed.
    This morning. Same thing. One thing I noticed, was that all of our computers -- not iDevices -- had no problems. Weird.
    So I checked the firewall, and found that every request was going to Malaysia, or Thailand. I have country blocking enabled on our firewall. So, I thought that was weird. Checked the IP addresses that were blocked, and found that they were Akamai addresses. I allowed one device through, to test, and everything works.
    Wondering if Apple is leaning on Akamai for the flood of traffic that the IOS 6 upgrade is causing.
    In any case, if your ISP, or firewall, router, what-not blocks Asian rim countries, it's worth a check.

  • One particular plug-in that I am trying to install reports 'an engine with the same name already exists.' However I cannot find it, even using the troubleshooting routines

    Hi,
    I am trying to install a add-on that will enable Google to behave as if I am in the USA. When I try to install the add-on I get a message which says 'An engine with the same name already exists'. However, I can find no evidence of the add-on and I have been through the various troubleshooting routines. Anybody know of a way around this?
    I have looked at the list of installed plugins and cannot see it. So whty does does FireFox think it's there?

    Hey oks10,
    It sounds like the Bing plugin might have been corrupted. I would bet that it's still installed, but not working. Try removing it from the \searchplugins\ folder in your [http://support.mozilla.com/en-us/kb/Profiles#How_to_find_your_profile profile folder].
    I'd close and restart everything after you are done, then try installing it again.

  • Unable to find RAID model type

    Hi Everyone,
    I am completely new to this Xraid and Xserve stuff. I have one of the old Xraid and I am trying to find out the model type for this raid.
    After looking at the back panel, only thing I found is this:
    512MB/512MB 720GB/2x2GB /FC
    but nothing else. After doing controller reset, I was able to connect to RAID using RAID Admin Tools using IP address but still unable to find any model number.
    Can anyone please help me with this?
    Thanks,

    I may be mistaken, but if you're trying to work out what model of XServe RAID you have I believe Apple only made the one.
    If you mean working out what firmware version the controllers are running, if you go in to RAID Admin, then in the Components tab you should be able to click the picture of the controllers, and it should tell you on the right hand side what firmware you have (latest is 1.5.1c)

  • N70 Unable to establish network connection using p...

    . . . but can browse the net using handset alone; PC suite can do other functions but OTA is not able to connect. This happened after I downloaded the latest PC Suite 7. Recommendation of FAQ/Help is to check connections settings (duh) and have cooperated with instructions. Nope, didnt work. Have tried:
    Uninstall; install of PC Suite to the letter 5x
    Reset phone to factory settings
    Use settings wizard to ensure proper internet settings
    Was recommended download usb cable driver - link is non existent
    Tested using a different N70 unit on my laptop - still no go (now doesnt that mean there is a software issue????)
    Most of the help desk tips at the call center are stop gap and rarely meant to go the distance assisting you (like when a blanket fix is recommended - go to service center to have phone software upgraded) or the standard spiel of "we'll put your case on record and we'll call you back in hours" and sometimes they do call back or not. So far in my case none of the tips have worked. I am about to reformat my pc, and if this doesnt work, then what can we say about the problem? Did we get a dud PC Suite, a lemon, a beta version?
    How then can I browse the net using my mobile as modem? I guess I am venting my frustrations here - but hey, may I challenge Nokia to find a fix for connectivity issues related to use of a Nokia Phone as a modem? Check out the discussions and you will find similar issues echoed all over. Or is Nokia just waiting for one of us indomitable tinkerers to find a solution and share it in these discussions?

    I REFORMATTED MY PC TO SEE IF IT IS A PROBLEM WITH MY LAPTOP SOFTWARE. I AM STILL UNABLE TO ESTABLISH NETWORK CONNECTION USING MY PHONE AS A MODEM. IT SAYS CHECK CONNECTION SETTINGS, BUT HOW FAR CAN YOU GO WITH THAT? THE CONNECTION SETTINGS ARE FINE! I CAN BROWSE THE NET USING THE HANDSET ALONE, SO WHAT GIVES? I CHALLENGE NOKIA TO FIND A SOLUTION TO THIS PROBLEM.

  • Unable to unlock iphone even if itunes password is correct

    Hello, I recently changed my itunes password but after my phone went to a lockscreen i am unable to unlock it using my new itunes password. I am sure the itunes password is OK because i am able to log in to icloud and even to the itunes applicaton on my PC but i am still unable to unlock my phone using the same, new password.
    Please help!

    The unlock code for your locked screen is not the same as your iTunes password. It is usually a 4-digit code that is a different sequence of numbers.

  • Unable to find downloaded theemes

    i own n73me and downloaded some themes using GPRS and saved them once to menu and second one to images and third one to lifeblog. now i'm unable to find them in the cell. so can't use them

    Hi, samsonkh. If you're still unable to find the file, let me further assist you with this. The file is an email attachment, right? On your email, you tapped 'Download all' and opened it by tapping the file, correct? If so, it should be visible under Office> places> email.
    If you made changes to a file or want to change its file name, just open the file under 'email'> ...> save as. You can select where to save the file. It's either on the phone or to Onedrive. 
    For more information about the Office Hub, see below links:
    Office Hub
    Use Excel Mobile for Windows Phone
    Use Word Mobile for Windows Phone
    Use PowerPoint Mobile for Windows Phone
    Use OneNote Mobile for Windows Phone
    In case this did not help, just let me know. Good day and welcome to our community! 
    Note: The links are intended for the US.

  • Unable to find CUSTCRMPRJ

    Hello,
    We are trying to configure NWDI for the E-Commerce application. We are following the "Devleopment and Extension Guide - SAP E-Commerce 5.0" for this.
    While defining the tracks, we are not able to find the SC "CUSTCRMPRJ" - CRM JAVA CUSTOMER PROJECT 5.0. We implemented note 669669 as mentioned in the guide, but are still unable to find this SC.
    Can someone help us?
    Thanks and Regards,
    Reena

    Hi,
    I feel the note update was not successful. This is my third project and everytime i didnt find any problem after applying note. Probably i may not have encountered your issue.
    As per coping the contents don't follow the ISA development guide . just follow this.
    [How to create custom Application in E-commerce 5.0 with NWDI|http://sateeshchandrach.googlepages.com/How_To_Create_Custom_App_ECO5200.pdf]
    and the other way is
    [How to create custom Application in E-commerce 5.0 without NWDI|https://wiki.sdn.sap.com/wiki/display/Snippets/HowtocreatecustomApplicationinE-commerce5.0without+NWDI]
    Please follow anyone of the documents and go ahead in development.
    Regards,
    Sateesh Chandra

Maybe you are looking for