STMS error- Transport control program tp could not be started RFC error

Hi,
All SAP expert i have query in STMS, i am trying to transport request from r/3 4.7 to CRm 4.0 & i am getting this error
Function : TMS_TP_SHOW_BUFFER
Message : TP_CALL_FAILED
Error code: 4
let me know how do i get rid of ths error.
any help will be appriciated,
Thanks In Advance.
~John

Hi,
It may be a problem with your tp - if you want to be sure, use tp at the O/S Level to do your import and then you should be able to find the exact error.
At the request to buffer:
tp ADDTOBUFFER <change request #> <SID> pf=TP_DOMAIN_<SID>.PFL
Then import it into the suitable client:
tp IMPORT <change request #> <SID> pf=TP_DOMAIN_<SID>.PFL
Please award points, if helpful.
Thanks, Dibya

Similar Messages

Transport control program tp could not be started

Hi,
While importing a request to Quality Server , transport terminates with an error "Transport control program tp could not be started" RFC error.
Function TMS_TP_IMPORT
Message TP_CALL_FAILED
Tp output says "This is tp version 340.16.37 (release 640)
Warning: Parameter DBLIBPATH is no longer used.
Warning: Parameter DBSWPATH is no longer used."
340.16.37.kernel release 640,patch number 193.
RSTPTEST was successful .
Changed auth/rfc_authority_check to value '0' in the profile and restarted.
user id provided in RFC connection is TMSADM and the user is
having "S_RFC" authorization object.
This error started after putting the oracle patchset 9.2.0.8.
SAP version 4.7, Oracle 9.2.0.8, on AIX 5.2
It will be appreciable if any one can help me out in this issue.
Regards,
Saji Kumar

Hi,
provide result for
tcode - stms_import -> import queue -> check -> transport tool
also execute RSTPTEST report on QAS,
RFC error indicate problem in RFC connection , check it using SM59
regards,
kaushal

HT2932 When I try to save a file from my GarageBand to my PC it keeps giving me a error message . Message says could not be copied because error occurred. The file cannot be found. Any suggestions?

When I try to save a file from my GarageBand to my PC it keeps giving me a error message . Message says could not be copied because error occurred. The file cannot be found. Any suggestions?

I was trying to upload from my iPad to my pc.
That was hard for us to guess, from your post It might have helped to mention the iPad.
How are you trying to save the song to your PC? Are you sending the song to iTunes? If yes, as a project or as an audio file? Make sure, you select "AAC" and not "GarageBand", when you share the song from your iPad.
If the clip is not too large, you might alternately try to share it by mail, see:
Share GarageBand songs

An unknown error has occured, your iPhone could not be updated. Error 3014.

An unknown error has occured, your iPhone could not be updated. Error 3014. How does one resolve this and get the iPhone 4S back to working condition?

See this discussion from the More Like This section on the right...
https://discussions.apple.com/message/20220723#20220723

Transport control program tp ended with error code 0212 | URGENT

Hi All,
         We are trying to import requests in our PRD system. As soon as we select the request and try to import it , we get the error "Transport control program tp ended with error code 0212".
This is tp version 305.12.42 (release 46D) for ANY database
/usr/sap/trans/cofiles/K915883.<SID> for transport: <SID>K915883: Permissio
HALT 20070222114323
ERROR: /usr/sap/trans/cofiles/K915883.<SID> : cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 6878
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
ERRORS: Highest tp internal error was: 0212
Output from tools called by tp:
This is R3trans version 6.05 (release 46D - 18.10.01 - 11:30:00).
R3trans finished (0000).
When i checked the transport tool and rfc destinations, everything was successful.
When i tried to do tp connect -
23> tp connect <SID> pf=/usr/sap/tran/bin/TP_DOMAIN_<SID>.PFL
This is tp version 305.12.42 (release 46D) for ANY database
E-/usr/sap/tran/bin/TP_DOMAIN_<SID>.PFL could not be opened.
EXIT
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0212
tp finished with return code: 212
meaning:
could not access file as supposed (see SLOG for more details)
We are having SAP 4.6C with DB -Oracle and OS HP-UX.
Please let me know whow to rectifiy the issue. The situation here is getting worse.
Regards,
NK

Hi Ruchit, Sorry for the delay. Here is the file you wanted -
steic25q:root>ls
DOMAIN.CFG          TPPARAM.bak         TP_DOMAIN_ID1.PFL   TP_DOMAIN_IQ1.PFL
TMS_TEST.IS1        TPPRAMA0918         TP_DOMAIN_ID1.orig nik.dev_evt
TPPARAM             TP_DOMAIN_ID1.BAK   TP_DOMAIN_IP1.BAK
steic25q:root>more TP_DOMAIN_ID1.PFL
#TMS:0078:DOMAIN_ID1
Caution !
This file was generated by the Transport Management System.
Do not change this file using a text editor.
For more information, refer to the online documentation of the
Transaction STMS.
If this file was destroyed, it can be regenerated in the TMS.
To do this, log on to the domain controller (system ID1) and call
transaction STMS. In the System Overview, you can distribute the TMS
configuration. This regenerates the file.
STMS -> Overview -> Systems -> Extras -> Distribute TMS configugration
TRANSDIR            = /usr/sap/trans
DU1/CTC             = 1
DU1/DUMMY           = 1
DU1/NBUFFORM        = 1
DU1/TP_VERSION      = 266
DU2/CTC             = 1
DU2/DUMMY           = 1
DU2/NBUFFORM        = 1
DU2/TP_VERSION      = 266
ID1/CTC             = 0
ID1/DBHOST          = steic24q
ID1/DBLIBPATH       = /usr/sap/ID1/SYS/exe/run
ID1/DBNAME          = ID1
ID1/DBSWPATH        = /oracle/ID1/817_64
ID1/DBTYPE          = ora
ID1/NBUFFORM        = 1
ID1/TP_VERSION      = 266
IP1/CTC             = 0
IP1/DBHOST          = steic25q
IP1/DBLIBPATH       = /usr/sap/IP1/SYS/exe/run
IP1/DBNAME          = IP1
IP1/DBSWPATH        = /oracle/IP1/817_64
IP1/DBTYPE          = ora
IP1/NBUFFORM        = 1
IP1/TP_VERSION      = 266
IQ1/CTC             = 1
IQ1/DBHOST          = cbnysap2
IQ1/DBLIBPATH       = /usr/sap/IQ1/SYS/exe/run
IQ1/DBNAME          = IQ1
IQ1/DBSWPATH        = /oracle/IP1/817_64
IQ1/DBTYPE          = ora
IQ1/NBUFFORM        = 1
IQ1/TP_VERSION      = 266
TRN/CTC             = 1
TRN/DUMMY           = 1
TRN/NBUFFORM        = 1
TRN/TP_VERSION      = 266
steic25q:root>

Transport control program tp ended with error code 0008

Hi !
I trying to realize an export of client like that :
Source Client                     400
Target System:                    ASI
Copy Type                         Client Export
Profile                           SAP_RECO
Status                            Ended with Errors
User                              ST01051
Start on                          17.06.2009 / 17:41:00
Last Entry on                     18.06.2009 / 00:20:40
Transport Requests
- Client-Specific                 ASIKT00028
- Texts                           ASIKX00028
The export ended with this error :
Transport control program tp ended with error code 0008
Error when exporting request ASIKT00028 00:20:39
Program ended with error or warning, return code: F
What happen ?
If somebody can help me to solve this problem ?
Regards,
Johan

hai johan ,
of the return code is 008 then it is error,
what have u transported to target just chekc the log an du might find the error ,
just click the expand button of the error and u will get the detials what errror occured
may be some objects might be inactive just chekc once
m.a

Re: Transport control program tp ended with error code 0212

Hi ,
When transport request is added to import queue, getting following error :
"Transport control program tp ended with error code 0212 "
Please find the slog file description as follows:
HALT 20110530001050
ERROR: /usr/sap/trans/cofiles/K904416.<SID>: cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 2273
HALT 20110530004629
ERROR: /usr/sap/trans/cofiles/K904416.<SID> : cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 14341
HALT 20110530004703
ERROR: /usr/sap/trans/cofiles/K904416.<SID> : cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 14514
How to correct this ?
Thanks
Srikanth

Hi,
It may happen happen due to permission issue when you are having SAN and sharing common trans directory now to check the permission of the file you have to login at os level and check the permission of the TR.
cd /usr/sap/trans/cofiles/
ls -l K904416<SID> - now here it will show the permission of the file please paste the output
Thanks,
Saleem

ASSIGN TO betrag could not be performed (system error)

Hi Gurus,
Can anybody let me know when we will get the above said Subject error.
I had encountered it in MIGO GR transaction.
Iam pasting the total text of the error below
ASSIGN TO <betrag> could not be performed (system error)
    Message no. M7103
Diagnosis
    A system error has occurred during internal processing by the program.
Procedure
    Contact your system administrator.
Regards
Mohan

Hi ,
Sit with Abaper and process MIGO in foreground it seems something related to program which runs in background during material document generation.
Thanks
Suresh

Win8 Pro Hyper-V Error : Virtual machine could not be started because the hypervisor is not running

Hello,
Recently in Dec I bought a new desktop PC.
HP ENVY Desktop h8-1420t
CPU & ChipSet: Intel Core i7 Intel Z75
I have Windows 8 Pro and installed Hyper V but cannot start the virtual machines. I get the following error message: Virtual machine 'zzzz' could not be started because the hypervisor is not running
I followed these steps to enable Hyper-V:
1. Upgraded to Windows 8 Pro
2. Tried to add Hyper-V feature but Hyper-V Platform was grayed out
3. Enabled Virtualization in the BIOS - security configuarion
4. Cold booted Computer
5. Added the Hyper-V Platform Feature
6. During the restart machine was in forever state spinnign state, did a manual reboot
7. Disabled Virtualization in the BIOS again
8. Successfully Re-Booted the Computer now Hyper V manager was available
9. Configured Hyper V network to use external network
10. Created a new VM through the Hyper-V Manager
12. Tried to boot up teh newly Created VM and I get this error message:
Virtual machine 'zzzz' could not be started because the hypervisor is not running
Any solutions for the error I am seeing above?
Similar problems are discussed here:
http://h30434.www3.hp.com/t5/Desktop-Lockups-Freezes-Hangs/Cannot-boot-if-HP-ENVY-Bios-Virtualizatio...
Thanks!!

Same Problem Here - did you discover any answers? I may have to return the system if it can't do hyper-v

HT1386 error "session could not be started with iphone"

Get error message that states "session could not be started with iPhone"

Here.
http://support.apple.com/kb/ts2529

Windows Mail could not be started. Make sure that your disk is not full or that you are not out of memory (0x800C0155).

I have Vista SP2. Every time I open Firefox (3.6.13), I get three consecutive error messages:
1) Windows Mail could not be started. The application was unable to open the Windows Mail message store. Your Windows Mail mailbox data is currently being used by another program, such as a virus scanner. Close the program or wait for it to complete its operation, then open Windows Mail again (0x800C0155).
2) Windows Mail could not be started. Make sure that your disk is not full or that you are not out of memory (0x800C0155).
3) Windows Mail could not be started because MSOE.DLL could not be initialized.
This series of messages continue to recur during my Firefox session and eventually will freeze up my session.
I use Gmail. I do not use Windows Mail or Outlook Express and deleted Windows Live Mail. There is a a file named msoe.dll using the path C: /Program Files/Windows Mail. I also found C:/Program Files/Windows Live/RemoteActiveX even though I thought I deleted all Windows Live programs.
I have set Firefox as the default browser. Also, in Firefox, if I click on "File=>Send Link", it triggers the series of three error messages above.
I don't understand why Gmail would reference Winmail. Any ideas how I can fix this? Can I or should I delete the Windows Mail and Windows Live folders?

I have had many problems with permissions on Windows Vista, 7,8 & 81.1. It is usually after an update or installation, especially one that requires a reboot to finish (some AVG, Windows Live, Windows Updates, etc). Once File(s), Folder(s)
and Registry Key(s) permissions are screwed up, it can take days to work them out if ever.
After having spent several hours on a clients PC and online forums with this problem. I transferred her user profile with a free program called
Transwiz (run as Administrator) to a zip file on the HDD. I renamed her user in manage User Accounts to "Username old". I then ran Transwiz again to restore the profile but telling it to create a new user using the original Username.
After it completed restoring the profile, I logged out of "Username old" and logged in to Username and all wass well, I only needed to supply the email password which is not transferred. When you move profile data, all the old permissions
have to be removed and <st1:personname w:st="on">new</st1:personname> permissions added so the data and files belong to the <st1:personname w:st="on">new</st1:personname> user. This cleared up all the permission
problems.
James Taylor

Virtual Machine could not be started because the hypervisor is not running

Hi
I have installed Windows Server 2012 Standard Edition with a GUI. Default configuration, nothing special.
Whenever I want to turn on any machine inside of Hyper-V, the following error message appears:
"Virtual Machine could not be started because the hypervisor is not running"
Whenever this happens, I run the following command:
bcdedit /set hypervisorlaunchtype Auto
and reboot the Server. After a reboot, all Virtual Machines can be started without Problems. However, as soon as I shut down the Server instead of rebooting it, the Problem happens again and I need to enter the command again and reboot.
Now my question is how to solve this Problem. I never had this Issue with Windows Server 2008 R2, maybe there are some differences regarding the Hypervisor in Server 2012. How can I make sure the Hypervisor is always on, even after a Shutdown? Thanks in
Advance

Hi,
Please check whether you have event log with ID 3112.
Hyper-V requires hardware support, including: an x64 CPU; VT (Intel) or AMD-V (AMD) hardware extensions; No eXecute (NX)/eXecute Disable (XD) and full BIOS support for hardware virtualization.
Check if the computer meets the hardware requirements, use the appropriate utility for your CPU manufacturer.
If the computer meets the requirements for Microsoft virtualization software, see the video titled
Hypervisor is not running error: How to fix
, which demonstrates how to change the system BIOS on a computer to enable support for virtualization. Make sure DEP and CPU virtualization is enabled in BIOS. (http://go.microsoft.com/fwlink/?LinkId=163578
Also, check that
Boot Configuration Data (BCD) store is set to start the hypervisor, and then restart your physical computer.
The BCD store contains boot configuration parameters and controls how the operating system is started in Windows Vista and Windows Server 2008 operating systems. These parameters were previously in the Boot.ini file (in BIOS-based operating
systems) or in the nonvolatile RAM (NVRAM) entries (in Extensible Firmware Interface-based operating systems).
You can use the Bcdedit.exe command-line tool to update BCD store with the correct launch options as referenced in the error, and then restart the server. Bcdedit.exe is located in the \Windows\System32 directory by default.
For more information please refer to following MS articles:
Event ID 3112 — Hypervisor Operation
http://technet.microsoft.com/en-us/library/dd581879(v=ws.10).aspx
You receive the error message "virtual machine could not start because the hypervisor is not running" in Windows Server 2008 or Windows Server 2008 R2
http://support.microsoft.com/kb/2490458
Troubleshooting Event ID 3112 "The virtual machine could not be started because the hypervisor is not running."
http://social.technet.microsoft.com/wiki/contents/articles/194.hyper-v-troubleshooting-event-id-3112-the-virtual-machine-could-not-be-started-because-the-hypervisor-is-not-running.aspx
Lawrence
TechNet Community Support

Apple Mobile Device service could not be started. (-2146959337)

I keep getting the error "Apple Mobile Device service could not be started because an unknown error occurred (-2146959337). After I hit OK, it says "This iPod cannot be used because the Apple Mobile Device is not started." I have tried starting the service by going into Services, but it just tells me "Error 5: Access is denied." I have reinstalled iTunes, Quicktime, and Apple Mobile Device service multiple times, but I still get the same error. I had an iPod nano that worked fine, but now that I got an iPod touch, it gives me this issue every time I connect it.

I figured it out on my own, and it was an odd fix. I added a password to my account in users, and then made Apple Mobile Device service log in through my account, and now it works.

AIR 2.0 & PHP bin : NativeProcess could not be started

Hi there,
I'm trying to play w/ AIR 2.0 native API, so I wanted to communicate with my PHP binary to execute some code, here is what I did : http://pastie.org/private/ncwknu71kugvutimsvbzuq
An error is thrown, saying "Error: Error #3219: 3MmŽ_The NativeProcess could not be started", do you see what I could have made wrong? I must admit I'm lost here considering that tracing "startup.executable" returns null (just after setting it, line 38) and "startup.arguments" returns null too, (juste after setting it, line 31)..
Any thoughts?
Thanks !

I am assuming that your are using adl to launch the app. NativeProcess API is available only under extendedDesktop profile.You have to run adl in extendedDesktop profile to be able to set the executable and the arguments:
~/sdk/bin/adl -profile extendedDesktop /path/to/application.xml /path/to/rootContent
Did you try the same and still you see this issue?

Stms Error Could not start transport control program tp

Hi Experts,
We have installed new system and trying to configure STMS, but we are facing Issue like " Could not Start transport control program tp ". Can anyone please suggest us how to continue further...
Tasks we have done :
1. Upgraded kernel, tp , r3trans to latest.
2. Added Dbms_type = mss in Environmental variables
3. Reconfigured STMS by deleting old one..
Thanks in Advance...
Regards,
Krishna.M

Hi Benjamin,
We have checked for Authorizations to the dirve, we are having full authorizations also host file entries are correct, but we are unable to find the dev_tp trace file. Can you please tell me where can i find that file. For more information please find the image....
Please suggest me how to resolve the issue..
Regards,
Krishna.M

STMS error- Transport control program tp could not be started RFC error

Similar Messages

Maybe you are looking for