STO line still appears in MB5T

Hi,
   I have an issue in MB5T. One of the lines of the STO is still appearing. This line is the automatically generated line of empties material. Its STO quantity is 20 while its delivery quantity is 60. I believe this difference is causing to appear in MB5T. The goal is to remove this line in MB5T.
  Please advise on how to do this.
  Some note: GR indicator is not set for empties material line (Standard behavior)\
  Thanks!

Hi,
  I think what happens is that GI is greater than GR. Initially, the quantity in the delivery is the same as STO. But later on, it was changed. Thus, causing the difference. Because of this, this line is appearing in MB5T and the concern is to remove that line in the report.
  If I'm not mistaken the process is STO->Delivery->GI. Is that correct?

Similar Messages

  • I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears.

    I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears. What can I do to remove this error.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below on this page to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    { launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; crontab -l 2> /dev/null; } | open -f -a TextEdit 
    Step 4
    ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • The camera app on my iphone 4S is crashing and while using the rear video cam black wavy lines are appearing but only when exposed to flurescent light in addition to the front cam... can any one please tell me what is happening???

    the camera app on my iphone 4S is crashing and while using the rear video cam black wavy lines are appearing but only when exposed to flurescent light in addition to the front cam... can any one please tell me what is happening???

    Try resetting your phone by holding down the home and off button until the apple symbol comes up. Then if still doing, restore your phone in itunes from your backup.

  • Some of the apps previously downloaded have now become blank - white box instead of picture. Name of app still appears. Have tried hard reboot and sync to make sure everything is up to date. Anybody ever had this? How can I fix?

    Some of the apps previously downloaded have now become blank - white box instead of picture. Name of app still appears. Have tried hard reboot and sync to make sure everything is up to date. Anybody ever had this? How can I fix?

    One more thing to try.  Double click on the home button.  Scroll in that bottom line of icons (swipe finger to left) to the app that are all white.  Hold your finger on the app until the - sign appears.  Tap it to close the app.  Hopefully it will then show up correctly.  (As they say about chicken soup curing a cold, "can't hurt")

  • Extra line space appearing - Help!

    Hiya,
    Can anyone help.  When in Contribute, I have edited and have deleted a line space using 'shift+enter', it shows as having no line space in Contribute, but when it publishes - lo and behold - a line space appears.
    Can anyone help me resolve this please?
    Thanks,
    Ali

    Try this:  After your edit, hit F5 to redraw the page and be sure that things are as you wanted.  You may discover that there is still an extra line that you have to deal with....

  • How can i start to use i chat if it said my password is incorrect and i change it, but still appears that the password is wrong :(

    how can i start to use i chat if it said my password is incorrect and i change it, but still appears that the password is wrong

    Hi,
    AIM
    If this is a Name valid with the AIM servers the password has to be 16 characters or Less.
    The Apple IDs from MobileMe and @Mac.com allow you to create (And prompt your for ) Longer passwords.
    These Names are Valid with the AIM servers but they cannot process the password.
    Use iforgot to Change the password to something shorter.
    Googletalk
    If you are using a Google ID then you have to enter your Google ID as it appears when you log in to the Google Web Mail Page.
    The Mail App seems to allow the Endings (@gmail.com and @googlemail.com) to be used almost interchangeably where as the Jabber Server Google run for Google Talk is stricter (so iChat needs to be precise).
    Also the chat option needs to appear in the Web Mail page.
    If it does not it needs Enabling on you Google Account settings page.
    8:10 PM      Tuesday; July 5, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Users stills appear to have transactions assigned even though roles have been removed.

    Hi,
    I'm currently looking at a number of users with access to sensitive transactions (e.g. SCC4).
    When looking at a combination of the AGR_ROLES and AGR_TCODES tables I can see there is currently only one active role and one active user assigned this access which would fall in line with what was to be expected based on the population I am looking at (we're not concentrating on auth object level for now).
    However when I go through SUIM and filter on users by complex criteria and enter transaction code SCC4, about 20-30 users pop up (this is how many people used to be assigned access to SCC4).
    When access was removed for these 20-30 users, it was done at 'role level' so my question is, even if roles have been removed, when looking through SUIM would a user still appear to have transactions associated with that role assigned - if so, why does this happen? I assumed once a role is removed it would removed the underlying transactions etc with it?
    My assumption at the moment is that even though SUIM is showing users still have access to SCC4 they can't actually use it as the role it was associated with has been removed.
    Any help/clarity on this would be greatly appreciated.

    Hi Johnny,
    Please do perform the User comparison.
    Goto PFCG  -> Role Name -> user comparision
    then check in SUIM still user is having that Tcode or not .
    for detail
    Go to SUIM
    Roles by complex selection criteria -> put Tcode there
    it will give you Roles name having that tcode . and then you go to that Role and you will get list of Users in PFCG (User assignment Tab) .
    same goes with User
    SUIM - Users  by complex selection criteria - > put tcode -> Profiles associated with - > roles assosiated with it .
    But i suggest after you make any changes to Role / Profile you please do user comparision .
    Regards
    Dishant Pathak

  • Order Organiser - Booked Sales Orders still appearing as "Entered"

    Hi everyone, I am currently experiencing some issues regarding the booking of Sales Orders.
    My problem is that I have already booked 1 SO and I got a confirmation message that it has been booked.
    However, the Sales Order still appear in the system as "Entered" and when I try to rebook it, the error message says "Order is not eligible for booking. Check workflow status for this order."
    On the same note, when I try to go to the line items of the Sales Order, the following message appeared: "FRM-40735: WHEN-NEW-BLOCK-INSTANCE trigger raised unhandled exception ORA-04031".
    Thanks for your help.

    Hi,
    Unsure the version you are using, I suspect that there is a error in the book order workflow (OEOH).
    You can take a look at the workflow status of this order.
    If appropriate, you can retry the workflow in error.

  • Deleted item in PR still appear in PO when convert PR to PO via ME21N

    Hi Expert,
    Is it standard SAP practise where if there is deleted item in PR, then we convert it to PO via ME21N, the deleted item will still appear as available in PO? I know we can just delete it again in PO or just select items that we want to convert to PO but the problem is the person who do PR and PO is 2 different person. Person who convert the PR to PO will not know which one has been deleted in PR.
    Any other way we can set the deleted item in PR not to appear in PO?
    Thanks.

    Hi,
    Yes, it is standard SAP practice if the deleted item in PR shown after converted into PO using ME21N T-code.  The PO line item marked deleted symbol (dust pin) and the respective PO deleted line item PR immediately opened for creating new PO.
    Using ME21N T-code, PO created 2 different person through PO 'Document Overview' open PR converted into PO,
    Once PO converted to the particular PR, that PR is not appear to convert PO for other person. So, other person need not worry which PR deleted and which PR is open to convert for PO. Only display open & released PR for creating new PO.
    This is the standard SAP concept.
    Hope, is useful for you.
    Regards,
    K.Rajendran

  • Hey recently there has been a turquoise/red horizontal line that appeared on my screen. i turned off my ipod but it appeared after about 5 minutes...what do i have to do to get rid of it?

    recently there has been a turquoise/ red horizontal line that appeared on my screen. i turned my iPod off but the line appeared again after about 5 minutes...how do i get rid it?

    Try the standard fixes:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod
    If you still have the problem that indicates that you have a hardware porblem and an appointment at the Genius Bar of an Apple store.

  • Gray lines (like etch a sketch lines) have appeared on my iPad 2 screen. Why and what should I do about them?

    Gray vertical lines have appeared on my iPad 2 screen. Much like an etch a sketch. What are they and is there anything that can be done about them?

    Do they stay in the same place whichever way up you hold the iPad, and do they still show when you've got an app open ?
    Have you tried a reset to see if they still show after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    If that doesn't fix it then you could try restoring to your backup and/or resettings back to factory defaults. But you may need to contact Apple.

  • IMac 10.4.11 Because permanent vertical lines have appeared on my screen, I need to get a new monitor. The adapter apple sells goes from female VGA to mini-DVI. What kind of cable should I get as well:female to male?

    If I use an adapter (female VGA to mini-DVI) for my iMac 10.4.11 OSX, I also need a cable. Should that cable be female VGA to male VGA?
    Permanent vertical lines have appeared on my display, and connecting to another display (monitor) requires a cable and adapter. I want to be sure I am purchasing the correct cable for the Apple adapter. 

    What made me think I need to format if I upgrade the OS?
    I just presumed so really.
    What made me think I need to constantly format computer with my problem?
    Well, after many attempts to repair the drive, which fails, cannot even reach the log in screen, I am left with no other choice?
    And also, I have to note now, System Preferences keeps crashing without reason, it either takes ages to load, just by clicking it to open, or clicking something within it, or it just crashes.
    And temporarily, it freezes the computer totally, with no response.
    Seriously, am I missing a system file or something? Anyone experienced this problem before?
    My computer is literally a blank computer right now, installed VLC and Shades, updated Adobe Flash Player, installed Skype and Adium. I would say Growl from Adium caused it, but it has happened prior to Skype and Adium. Any ideas anyone?
    Thanks,
    From Lelouch

  • Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go?

    Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go, therefore i cannot use the apps?HELP PLEASE

    http://support.apple.com/kb/TS3281

  • Uploaded Files in "Select Document to Share" still appears (w/different filename) after content deleted.

    Does anyone know how I can remove these as well?  It would appear a copy of uploaded content gets saved somewhere and is referenced (i.e. available) even after I delete the content from my profile administration.
    Nothing in Uploaded Content.
    Files still appearing although as we see below I have purged the uploaded content.

    What you are seeing are the pod instances. If you go to Pods > Manage Pods you can select those instances of the share pod and remove them from the room.

  • I delete some emails ,there are moved to trash . I delete them from trash folder too and they still appear in a folder called 'all messages". I repeat the same actions and after a while they appear again!what should i do to delete them permanently??

    I delete some emails ,there are moved to trash . I delete them from trash folder too and they still appear in a folder called 'all messages". I repeat the same actions and after a while they appear again!what should i do to delete them permanently??

    If you are using Apple's Mail app 6.5 is the latest version irrespective of what a previous poster says. It does sound though that you are using a gmail account online via a web browser. Please confirm and fill in missing information.

Maybe you are looking for