Order Organiser - Booked Sales Orders still appearing as "Entered"

Hi everyone, I am currently experiencing some issues regarding the booking of Sales Orders.
My problem is that I have already booked 1 SO and I got a confirmation message that it has been booked.
However, the Sales Order still appear in the system as "Entered" and when I try to rebook it, the error message says "Order is not eligible for booking. Check workflow status for this order."
On the same note, when I try to go to the line items of the Sales Order, the following message appeared: "FRM-40735: WHEN-NEW-BLOCK-INSTANCE trigger raised unhandled exception ORA-04031".
Thanks for your help.

Hi,
Unsure the version you are using, I suspect that there is a error in the book order workflow (OEOH).
You can take a look at the workflow status of this order.
If appropriate, you can retry the workflow in error.

Similar Messages

  • Error while booking sales order

    Hi All,
    I am getting below message while booking sales order.
    Please suggest on how to solve this
    Order header level sales credit must be equal to 100%
    Thanks,
    Sam

    Hi Sandeep,
    Thanks or the answer. Actually there are 350 orders. so we can not update them from front end individually..
    Infact i am looking for the API code to update this. it will be very helpful if anyone can provide me the API code to update the sales order header salesrep_id field from backend.
    Thanks,
    Samir
    Edited by: user11998096 on Apr 20, 2011 12:01 PM
    Edited by: user11998096 on Apr 20, 2011 12:02 PM

  • Duplicate production order due to sales order on credit block

    Dear Experts !
    Need feedback on the following scenario:
    - Sales order is entered for material which is produced in-house specific to the sales order (ie customer's logo is on product).
    - Schedule line in sales order creates a production order specific to the sales order.
    - Customer runs into credit check a few days later and consequently the schedule line in the sales order is removed due to credit block, however the linked production order still remains and is produced by factory.
    - Sales order is released from credit check and a new schedule line is created resulting in another production order being released.
    Any ideas on how to prevent duplication of production order?
    Thanks in advance!
       -Alvin

    Hello,
    Apologies for the confusion, let me explain it a bit more.
    - Sales order is entered for material with planning strategy group of make-to-order, the schedule line initiates new production order for make-to-order material.
    - A few days later - the customer goes over credit limit or has overdue invoices, etc..
    - During background rescheduling (or any sales order change) the sales order gets a credit block due to static check.
    - Sales order block deleted schedule line in sales order, however the production order remains active.
    - Once the sales order is released from credit block, a new schedule line is created which initiates a new production order.
    - Duplicate production order is now being made in shop floor.
    I hope the above explains my scnario a little clearer.
    Thanks and regards,
    Alvin

  • User exit for checking creation of prod. order reference to sales order?

    Hi all,
    What are user exit suitable for checking creation of prod. order reference to sales order to have the same plant. If plant not the same, an error message should appear.
    thanks.

    Hi,
    user exits:
    PPCO0003  Check exit for order changes from sales order
    PPCO0007  Exit when saving production order
    Regards,
    Vivek

  • How to find out the list of Production orders created for sales orders

    Dear All,
    Our company wants to generate a report for a List of Materials sold out in a particular Product Hierarchy. Along with that we want to know the list of Production orders created for the sales orders.
    How to identify the production orders which are created based on Sales orders.
    Kindly suggest.
    Regards,
    Mullairaja

    Check these threads
    [Sale Order & Production Order|Sale Order & Production Order;
    [Re: Linking Production Order against a Sale Order MRP run|Linking Production Order against a Sale Order MRP run;
    thanks
    G. Lakshmipathi

  • How to change pricing Conditions in Sales order in change sales order bapi

    Hi Experts,
    How to change pricing Conditions in Sales order in change sales order bapi.
    I have used the 2 function modules bapi-changesalesorder and sd salesdocument change, But it is creating the new record , instead of changing the existing one, Could please assist regarding the same
    Thanks in Advance .
    NLN

    HI NLN
      I have just tried on my system and managed to overwrite the existing price by passing the following parameters.
      <b>Import Paramters:</b>
         SALESDOCUMENT - Sales Document Number
         ORDER_HEADER_INX - UPDATEFLAG as <b>'U'</b>.
         LOGIC_SWITCH - Import Structure - Pass 'X' to LOGIC_SWITCH-COND_HANDL.
      <b>Tables:</b>
         CONDITIONS_IN - ITM_NUMBER,
                         COND_COUNT, -> Condition counter same as KONV-ZAEHK generally it is <b>'01'</b>
                         COND_TYPE,
                         COND_VALUE,
                         CURRENCY.
         CONDITIONS_INX - ITM_NUMBER,
                          COND_COUNT,
                          COND_TYPE,
                          UPDATEFLAG as <b>'U'</b>,
                          CURRENCY.
       Hope i have clarified your query.
    Kind Regards
    Eswar

  • Free goods determined in Delivery over Order Quantity in Sales Order Item

    Hi Gurus,
    I've a problem about using free goods determination.
    First I created free goods master record with following information
    ZG1010012060075 From 100 PC -> Free good ZG1040012060075 2 PC
    Free goods Category = '2' (Exclusive)
    Free goods delivery control = 'E' (Delivery proportional to quantity in main item)
    Then I've created Sales Order with
    Item 10 ZG1010012060075 4,000 PC.
    Item 11 ZG1040012060075(Free good) has been automatically determined for 80 PC
    Then I've splitted Item 10 into 4 deliveries. The result of free goods determine in each delivery are as follow:
    Delivery#1)
    Item10 ZG1010012060075 = 1,176 PC
    Item20 ZG1040012060075 = 24 PC
    Delivery#2)
    Item10 ZG1010012060075 = 1,176 PC
    Item20 ZG1040012060075 = 24 PC
    Delivery#3)
    Item10 ZG1010012060075 = 1,176 PC
    Item20 ZG1040012060075 = 24 PC
    Delivery#4)
    Item10 ZG1010012060075 = 472 PC
    item20 ZG1040012060075 = 9 PC
    *Remark : Total quantity of 'ZG1040012060075'(free goods) = 92424+24 = 81 PC
    (Greater than 80 PC)*
    I think the system determined free goods in Delivery#4 correctly due to rounding up. But It might not be over the order quantity in Sales Order Item 11. Even though I've set the item category in delivery with Check overdelivery = 'B' (Situation rejected with an error message), the free goods are determined over order qty. BUT if I change delivery qty in delivery#4 Item20 from 9 PC -> 8 PC -> 9 PC, the error message occurred.
    My point is to fix the system not determine free goods in delivery items over order quantity in sales order item.
    Has anyone met this situation before? Do you have any idea about this issue?
    Best Regards,
    Prachya Lalitnorasate

    Dear Sai,
    Thank you for your advice, but it didn't solve my problem.
    I would like the system to determine free goods with proportional to main item AND In the last delivery main item delivered completely free goods must be determined equal to remaining open delivery item.
    Do you have any idea about configuration/customization?

  • Planned Order creation for Sales Order and Purchase Order

    Hi
    We have a following requirement.
    In normal scenario when we have demand for material  which was created by MD61 and in addition to that if there is Sales Order the 1st planned order gets revised.To better expalin this consider possible scenario
    You create plan via MD61 for 200 qty .The system creates Planned Order for 200.
    Now there is Sales Order for 150 peices.Then what happens is original  Planed Order of 200 is changed to 50 and another planned order is created for 150 peices.The requirement is not summed.
    Now in new scenario instead of Sales Order there is Intercompany Purchase Order of 150 peices.
    Now the system is not changing original Planned Order of 200,but it created another planned order of 150.So now there are 2 Planned Orders of 150 and 200.
    What I want to know is there any way wherein the system will reduce the original planned order (similar to Sales Order scenario)
    Regards

    Hi,
    Use Strategy 52 in urs case.
    PIR witll be created .
    None convertable planned order will be created.
    Once you get sales order for that material.
    New planned order will be created which will consume PIR( planned order ).
    Eg.
    PIR 10.
    Planned order 10 qty.
    Sales oder 6
    Planned order for SO 6 qty
    Planned order through pir will become 4 qty.
    Regards,
    Vishal

  • How to bring in the Open Sales Orders while performing Sales Order Conv

    Hi,
    Could you give some suggestions on the below:
    How to bring in the Open Sales Orders while performing Sales Order Conversion in R12.
    Thanks
    Pravin

    See http://ramugvs.wordpress.com/2011/08/27/how-to-stage-and-import-an-order-using-order-import-api-apps-wms-ebiz-11i-r12/
    Sandeep Gandhi

  • In which table,i could find order quantity for sales order..??

    In which table, i could find order quantity for sales order..??
    and also in which table i could find delivery for sales order..
    need help..??
    Moderator message: please search.
    Edited by: Thomas Zloch on Feb 23, 2012

    Check the table AUFM.
    Give the order number in AUFNR.
    For movement type 261 (GI) & 101 (GR), you can get the material document number (MBLNR), Material (MATNR), Qty (MENGE) & UoM (MEINS).

  • How to get the back order quantity for sales Order

    Hi Friends,
    I want to get the back order quantity for sales order . in MD04 t-code,
    there is a field(MDEZ-MNG01) for Received Qty/ Required qty.  But MDEZ is a structure.
    I tried from MDTB table, but the table is not updated with the values in MD04.
    Please guide me from which table I can get the back order Qty for sales Order
    (ref: t-code  MD04, MRP element = CusOrd).
    Thanks,
    Sagar

    >
    VIdya Sagar wrote:
    > Hi,
    >
    > Isn't  there any difference b/n Open Sales Order and Back order??
    Yes Quite Difference.
    Read:
    http://www.sap-img.com/sap-sd/explain-the-meaning-of-an-open-sales-order.htm
    http://help.sap.com/saphelp_sbo2005asp1/helpdata/en/b6/bdb9b2f02842348c9edbe78af863c4/content.htm

  • Error while creating a production order from a sales order

    Hi
       Even though the product has BOM when i try to create order with a sales order reference it is showing a warning message " NO BOM FOUND" . How to correct this error .
    regards,
    PradeepM.

    Dear ,
    Goto -CS02-Enter FG -Goto Header -Staus Long Text -Check wether BOM status is set to 1 -Active .
    Check the usage of the BOM -Should  be 1-Production .
    Check wether BOM is locked and Deltion Flag set -Header Status Long txt tab
    Check the valididty of the BOM and Sales Order Schedule delivery date
    Try and come back
    Regards
    JH
    Edited by: Jiaul Haque on Jul 6, 2010 9:03 AM
    Edited by: Jiaul Haque on Jul 6, 2010 9:04 AM
    Edited by: Jiaul Haque on Jul 6, 2010 9:04 AM

  • Block creation of multiple prod. order against single sales order in CO08

    Hi All,
    We have a requirement of blocking the creation of multiple production order against single sales order in CO08 if the production order is already created for that item.
    How to achieve this?
    SmanS

    Hi,
    you need to check if any user exit is there which will check order haeder table for the said sales order if any Prod Order exist for the same and flag custome error whicle prod order save.
    Pls revert if you need any further information.

  • Link a Purchase order to a sales order

    I am looking for a way to link a specific Purchase order to a Sales Order so that when the Purchase Order is received the items are allocated to that specific Sales Order and another sales person cannot sell the murchasedise.  I know you can create a po from a sales order but it seems like when the po is copied to a goods receipt, anyone can invoice those items on a different sales order/ a/r invoice?
    Thanks,
    Don Shields

    Hi Don,
    What you are looking for is more of a hard allocation of Items to a SO.  This functionality does not exist in B1 today.
    If you want to manually create some processes and validation for this, it could be done. 
    1.  Use Batch numbers management for items and linking a Batch to a SO and use the same Batch number in the Goods Receipt.
    I have provided an ellaborate solution for this on this forum last year
    You may check this thread in the meanwhile
    Suda! Again to restriction of items from PO based on SO

  • Purchase order based on Sales order

    Hi,
    I try to create Purchase order based on Sales order.
    The error message :
    "Base document card and target document card do not match"
    My code:
    oPurOrder.Lines.BaseEntry=oSalesOrder.DocEntry
    oPurOrder.Lines.BaseLine=oSalesOrder.Lines.Linenum
    oPurOrder.Lines.BaseType=17
    Could you help me please ?
    Tks.
    Laetitia

    Hi,
    Looking at your code I will check how you fill the fields in the oPurOrder object because the code you copied is only for the document lines and the error refers to the document itself (maybe you forgot to assign the cardcode property).
    If you are basing the document, a good and reliable method is to export the base to a xml file and load the target using this file. This way you garantee that all the info of the document is copied. After that you could use your code to update the info you want to change the same way you pasted it in your post.
    Hope it helps,
    -M

Maybe you are looking for

  • Simple question about table structure and HR in BW

    i need to following data from HR: current FTE, employee number, cost place i dont think the current FTE is stored per employee. Therefor is would need a list that contains: mutation start date, mutation end date, FTE, employee, cost place i think cos

  • Authorisation of computer

    I bought a new computer and transferred everything across. When I tried to download podcast on to iphone 3gs it said it was not authorised. I authorised it but each time I try to download it says I am not but when I go to authorise it says it is alre

  • Shift-return mood swings

    We purchased CS2 with Dreamweaver 8 a while back and I'm having persistent problems with inserting line breaks (<br>) with shift-return. Sometimes it works fine, but often, I just get that black circle with the line through that says - sorry! I'm not

  • BUG: Channel-based blend modes in FW CS5 & CS6

    I've observed problems with some of the blend modes in Fireworks CS5 and CS6. Several are definitely broken—most likely a by-product of changes introduced in CS5, which attempted to match some of Photoshop's blend mode behaviors (for Hue, Saturation,

  • Petition to open-source OCCI

    We are a large Oracle site running 10g on Solaris. We have plenty of C++ code. We are using g++ 3.4.x and we wish to use OCCI. But we can't because it's not supported with g++ on Solaris. We refuse to backport our C++ code to Sun's ancient RogueWave