STO with moving average price & with out moving average price

Hi,
i have two questions.
1) I have created STO and issued the material with 351 movement type, after issuing material accounting documents will be with moving average price from issuing plant.
what is the other process to issue with out moving average price ,the price must take as per in PO(sto).
2) why we will use STO why cont we use 301 movement type with one step transfer.
Pls help
Regards
Sunil

Hi Sunil,
1) the 351 movement type uses always the price from the material master, you can't change it
2) I don't really understand your question. You need advise when using STO and when 301?
Attila

Similar Messages

How to change moving average price with movement type 501

Hi Gurus,
Our client procures stock item with P-Card and use the movement type 501 to receive into the stock. The value of these items are updated with the moving average price, most of the time the current purchase price is different than current moving average price, so client wants to change the moving average at the time of receiving the goods into the system. Can some one explain is it possible or not. If possible how can we adjust the price? Client doesnu2019t want to go modify the price with other transaction. They want to modify while receiving with MIGO.
Thanks,
Vikram

Hi
You need to goto transaction OMJJ, select the movement type as 501.
Then double click on "Field selection-Enjoy transaction".
Add the field EXWBR & make it optional.
Now when you goto MIGO & enter 501 movement type you will find the Ext amount in LC field on Quantity tab page.
Enter the amount in this field during the GR.
Regards
Prasad

Moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can with be done with no OS/Hardware issues?

moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can with be done with no OS/Hardware issues?

babowa wrote:
Thanks; however, I was really referring to this: if it is preinstalled on a Mac, I believe the license is for that computer only (unlike an MAS purchased version which can be used on any Mac owned). Has that requirement changed?
At this moment, that's correct. The OS X license included with a Mac can only be used with that Mac. However, in the case the OP has purchased OS X Mountain Lion in the past, this may change

Moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can it be done with no OS/Hardware issues?

moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can it be done with no OS/Hardware issues?

When I work with a drive to boot many computers, I use the newest model computer I will be booting, and set the system up on that, run all the Apple updates. Normally I will have no issue booting any older computer with the same drive. Unless of course those older computers do not support the operating system on that drive.
If you want to test if the drive will boot the mac mini. Put your MacBook Pro into target mode. Connect the two computers together. And on the Mac Mini, go into system preferences and then under start up disk and see if the target disk mode computer's drive shows up there. Seelct that drive and restart. See if it boots ok. A bit easier then taking the drives out and moving things around.

HT5569 i can connect to internet and e mail via wi fi , however not out with these. I have just moved from i phone 3 to 4s is it the settings?

i can connect to internet and e mail via wi fi , however not out with these. I have just moved from i phone 3 to 4s is it the settings?

Let me see if I understand correctly, you can access the Internet and email when on wifi, however when not on wifi, none of this works? Is this correct? If so, do you have a data plan with your carrier? Do you have cellular data turned on in Settings? When you look at your carrier in the upper left corner, do you see a signal, carrier name, and then 3G, 4G or LTE displayed? Have you contacted your carrier about this?

Trouble moving AD User with Move-ADObject

When trying to move and AD User using the following command:
move-adobject 'CN=John Doe,OU=_Users,OU=ABC,DC=xyz,DC=com' -targetpath 'OU=Disabled Accounts,OU=_Users,OU=ABC,DC=xyz,DC=com' -targetserver someDC.xyz.com
I'm receiving an error:
Move-ADObject : Source and destination for the cross-domain move operation are identical. Caller should use local move operation instead of cross-domain move operation.
The Object and it's target both reside in the same domain. In fact there is only one domain. Is there some "local move" operation I should be using instead?

I've actually tried both the combination of several different OU's and several different users, making sure to remove all the group memberships from the user also. Still seem to be generating the same error =/
Edit: Perhaps something is set on the OU to prevent mass movement of objects? Sort of like accidental deletion?
AFAIK, the accidental deletion flag will only stop you from moving the OU itself, not moving a user into it.
Okay, some other ideas (you've probably tried all of these though..):
1 - Try with a different account.
2 - Try from a different PC.
3 - Try running directly on a DC (and try using the -Server parameter to force that DC to be used if it continues to fail).
4 - If you're running an older version of PowerShell, try updating.
I wish I could be of more help, but I just can't replicate this error no matter what I try.
Don't retire TechNet! -
(Don't give up yet - 12,700+ strong and growing)

MOVED: SLI evga with msi

This topic has been moved to AMD64 nVidia Based board.
https://forum-en.msi.com/index.php?topic=101964.0

Yes you can sli different manufacturer as long as they are the same series of card (like 7900gt with 7900gt, not 7900gt with 7800gt) and you run the later drivers. Oh, and people here will tell you they prefer the msi card of course
http://www.slizone.com/object/slizone2_rel80.html
Latest Forceware here:
http://www.nvidia.com/object/winxp_2k_91.47.html

Cost Run for Raw Material taking Standard Price instead of Moving Price

Hi all,
We ran a material costimate with normal components FG>SFG>RM. The RM price Control is set to
V (Moving Average Price) and for SFG & FG it is S(Std. Price). After we run CK11N, the price for
RM in Material Master changes as per Moving Price. We found that the RM Component is
costed based on Standard Price and not on the previous cost run Moving Average Price. After
certain period, if we again do cost run, the sytem is again picking up the standard price for costing
not the revised Moving Price. We have checked the Valuation Variant in the Costing Variant, where the strategy given is 1. Moving Average Price 2. Standard Price. We also tried to change the
sequence as 1. Price as per Purchase Info Record 2. Moving Average Price and 3. Standard Price and
also 1. Standard Price and 2. Moving Average Price. Our requirement is when we run the cost estimate the raw material has to pick the price of previous moving price stored in the Material Master. Kindly tell us where to set the indicator.
Thanks,
Sadashivan

Hi Srikanth,
Problem solved. I checked the sequence in Valuation Variant and modified in Valuation Variant for Plant which I have not set previously and now the system is working correctly.
Thanks,
Sadashivan

Vendor Consignment Price Issue for short term Price Contracts with Vendors

Hi Gurus, We are using Consignment Process successfully but very recently we faced a problem on some of our vendors who change the price every quarter.e.g. when the Buyer cuts the Consignment PO for 1000 pieces and receive it in K stock for 10$ the price is valid for 3 months in the Info record when we start moving from K stock to Company stock after 3 months the price is changing in info record and consumption happening after 3 Months is causing issues as you all know there is NO PO history tracking for Consignment PO's except 101k movement.we could manually do the jugglery by NOT changing the Info record untill the full 1000 qty of the PO is received but the problem is if there are multiple PO's and if the consumption is pulling stock from 2 different PO's then we have issues
E.g. PO1 1000 Qty Info rec validity May 1st to july 31st 10$ per piece
PO2 500 Qty Info Rec Validity Aug 1st to Oct 31st 12$ per piece
First consumption 411k for 800 Pcs on june 25th happens with 10 $
Second consumption 411k for 600 Pcs happen on Sep10th will happen with 12$ but the vendor wants 200 out of 600 with 10$ and 400 with 12$ how do we handle this situation without manually changing the info record please advise
As Consumption and settlement happens in MRKO which is totally unlinked with the PO. Is there a way we can handle the situation. There could be multiple consignment PO's which bring stock in Consignment

Hi DP,
As SAP doesn't Support Delivery cost settlement with the consignment process to seprate G/L ( Similar to accruals ), you need to go for Z development which while posting MRKO will be executed with refernce to PO & Issue Document Posting the freight Value to Appropriate fright G/L .
Regards
Manish
Edited by: Manish Kumar on Nov 3, 2010 12:06 PM

After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolutio

After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolution from the community, but hope to get the attention of Apple engineers. If you are having same problems or have a miracle cure I am all ears.

May start my own thread, but I'm having similar issues.
I've been using an old iMac (running 10.7.5) and Apple TV for years with no issues. Last week I bought a new Macbook Pro running Yosemite and have had audio issues multiple times. The weird thing is that sometimes it works flawlessly, other times (like now) I spend half an hour just trying to get a song to play.
My issues are: When I got to "computers" in Apple TV to stream my music, my music is sometimes chopper or intermittent, and I seen to know when it's going to happen based on the status wheel just before it plays. When I choose a song, the status wheel will spin for an unusually long time, usually an indicator that the audio is either not going to work, or stutter.
When it does finally pull up a song, the playhead sits at the beginning of the song for a good 3-5 seconds before actually playing. Then, when it starts playing, it's all downhill. It will play a few seconds, drop out, play a few more seconds, drop out, and then ultimately the playhead will keep moving across the song as if it's playing, but there's no audio.
Again, this is a new phenomenon never experienced by me. I've tried everything I could think of, some of them all at once:
• restart Apple TV
• restart Macbook Pro
• quite iTunes/open
• turn off Home Sharing on iTunes then reconnect it
• unplugging and cycling both my modem and router
None of these have alleviated the problem.
The odd thing is, like this morning, the audio started up perfectly and never gave me any issues. It wasn't until later in the day that it started. Perhaps after the macbook pro had been put to sleep? Not sure.
Regardless, this is an annoying trait, one that's new to me and my system (as stated, worked flawlessly until my new purchase), and is 100% limited to either a) the macbook pro b) Yosemite or c) both of them.

How do you filter out moving objects in a movie?

Hello!
I'v searched the internet for solutions to this but I cann't find any.
Im prittie new and I need to make a house on fire while two guys (one is me)
will be walking away from it, towards the camera.
I want to filter out these two guys and only apply fire and flames to the house itself!
To do this I used Time Diffrence and tried to isolate the guy using Fast Blur and Luma Key
but Im prittie lost.. Nothing works and I really need guidence
Do you know a trick to use?
I cant do greenscreening as the green background would cost a fortune..
But isn't there anyway to filter out moving objects?

I'm not sure that you totally get the process. This kind of shot requires at least 3 elements or plates. These three plates become three layers in After Effects. The bottom layer would be the Background Plate which is a shot of the house without any actors in the shot. The next plate would be the Effect Plate or Fire Plate which could be any shot you can get or generate through plug-ins of flames. The top layer would be your Foreground Plate or your two actors.
Now that you know what you need you can plan your shoot. The background plate is easy. Just set the camera on a tripod and lock it off. NO zooming. No panning, No change of focus. The foreground plate is also easy. You don't have to green screen the entire set, all you need to do is to put a green screen behind your actors. I do this kind of thing all the time using a 6' X 6' (sometimes smaller) green screen (or blue or red or purple) made of fabric and stretched over a frame that I made from 1/2" EMT electrical conduit and 4 90º elbow connectors for less than $20 at Home Depot or Lowes. You get a couple of assistants to walk behind your actors holding the green screen behind them. If you need to include their feet they can be easily rotoscoped out later and you can garbage matte everything else. If it's impossible to green screen the shot then you are stuck with roto, but that's much easier in CS5 using the roto brush. If you use your show with the actors as the background plate roto is even easier because you can hide a multitude of sins by simply feathering the roto and letting the fire light wrap around the actors a bit.
The fire plate can be purchased footage, or you could shoot a real fire against a black background, or you could create the flames using AE or even a 3D app like Blender (free) or a bunch of other apps.
Making the shot look real requires a few tricks once you have your clean plates. Fire creates light so you've got to add lighting effects to the background plate to sell the fire. You've also got to wrap light around your actors. Look for tutorials on light wrap for this. You can really help sell the effect if you place some flickering light sources behind and to the side of your actors when you shoot the foreground (actors) plate.
Once you get a handle on these techniques it's fairly easy to make the transition to pulling of this kind of a shot with a hand held camera (now you have to learn motion tracking). On a project I recently completed we had to put a fire in a prop fireplace while actors moved around bringing milk and cookies for Santa. It was all roto and the fire was shot at night with nothing more than a black cloth (Duvetyne) behind the fireplace grate. The final composite was 10 layers and was so totally believable that no one questions the shot.
The layers were from top to bottom, reflection in grandmas glasses, light wrap, actors (roto of original background plate), fire flicker layer, color mask layer (more orange around fire, fire glow layer, fire layer in Add mode, second fire layer in screen mode, third fire layer Luma keyed, and finally the original plate which contained all the actors, carefully lit with flickering firelight simulated by dangling a stick with fabric cut into 1/2 inch wide strips about one foot long in front of a orange gelled light behind and to the right of the actors.
If I get a chance I'll post a screenshot.
Here you go:
Light Wrap:
The Movie
Part of the original render before color grading.
Enjoy

Greying out movin average price in material master

Greying out movin average price in material master. please explain how to do it. I know it can be done in spro / Logistics general / field selection / Maintain Field Selection for Data Screens. please elabrate

Hi,
Field name for Moving average price is VERPR and the field selection group is 37.
In the path - spro / Logistics general / field selection / Maintain Field Selection for Data Screens--> give the field selection grp as 37 and make the field as Display for the particular Field reference (Eg ROH - for material Type ROH). Save your entries.
When you create material for material type ROH, you will have MAP field as display mode.
Raj

"Undo Tablespace X moved to Pending Switch-Out state."

Hi,
The alert.log is recorded several '"Undo Tablespace X moved to Pending Switch-Out state." notifications after UNDOTBS2 was created and brought ONLINE along with UNDOTBS1. UNDOTBS2 is now the default UNDO.
I understand that the notification is because of the "PENDING OFFLINE" state of the rollback segment which has the active transactions.
I ran the following query as per Metalink Doc 341372.1:
We are now having performance issues, could the sessions showing up from the query above be contributing to performance bottlenecks?
Please advise as this is high intensity production database.
Thanks and Regards,
A
Edited by: 850391 on Apr 16, 2011 12:22 AM

Hello,
The alert.log is recorded several '"Undo Tablespace X moved to Pending Switch-Out state." notifications after UNDOTBS2 was created and brought ONLINE along with UNDOTBS1. UNDOTBS2 is now the default UNDO.Why did you have to create a second UNDO Tablespace ?
We are now having performance issuesDid you have this performance issues before or after you have switched to UNDOTBS2 ?
If you killed the sessions which were using the former UNDO tablespace UNDOTBS1, then now some Transactions may be rollbacking.
If these Transactions were rather heavy, it can be ressource consuming to Rollback them.
It's just an assumption, as previously posted, you may use AWR or STATSPACK to see better what it's happening.
Hope this help.
Best regards,
Jean-Valentin

I have just moved to Spain and out in a Spanish sim into my Irish bought iPhone 4. It says 'invalid sim' and 'no service'. The phone is not locked to any provider. I have been told that its a handset issue. Please advise.

I have just moved to Spain and out in a Spanish sim into my Irish bought iPhone 4. It says 'invalid sim' and 'no service'. The phone is not locked to any provider. I have been told that its a handset issue. Please advise.

1). Are you positive the phone is not locked? Where did you buy it? Did you get it unlocked from your original carrier? Only Apple sells unlocked phones in most countries.
2). Did you try with a diffrent SIM. MAybe the one you have is defective.
3). Does the Spnaish carrier you are using support the iPhone? Who told you it is a handset issue?

As I bought my iPhone 5 16GB,White in the USA from Sprint, full price with tax,unlocked ,it was excepted to be a global phone. But now I come across with some problems in Chinausing local carrier, everything is working properly except sending text message

Dear AppleCare，
As I bought my iPhone 5 16GB,White in the USA from Sprint, full price with tax,unlocked ,it was excepted to be a global phone. But now I come across with some problems in Chinausing local carrier, everything is working properly except sending text message, and iMessage and Facetime also seem not to work.This is very serious for Apple and me! Will I have the chance to fix this?
I tried all the possible solutions from the Internet, and the Official solution offered by Apple (http://support.apple.com/kb/TS4459), but it doesn't seem to work.
Will Apple help me with this issue? Please do.
Information of my iPhone:
SN:F1*******8GJ
IMEI: ****
MEID: ****
ICCID: ****
My Apple ID account：****
<Personal Information Edited By Host>

I had the same problem. Kept getting message of waiting for activation or check network connections. I also tried every solution out there and nothing worked. This did though: I download the newest version of itunes (through Internet Explorer - Google Chrome wouldn't work). It pulled in my entire library thank goodness and then I plugged my iphone 4s into the computer. I let itunes find it, did a complete backup in icloud, then did a restore. Entire process took a couple of hours, but I now have imessage and facetime back. I was about ready to give up on Apple and go get a different phone ~

STO with moving average price & with out moving average price

Similar Messages

Maybe you are looking for