Stock Transport Order deletion in case of GR

Hi all,
I have an stock transport order (STO) between plants with delivery output posted (Goods Issue) and also with a goods receipt in destiny plant.
Problem is that if I set deletion flag in STO, system allows me to do that without any warnings.
Is there a way to validate when a STO has been received by the destiny Plant?
Thanks & Regards,
AW

Yes. It is a standard behavior. System will allow to delete the line item which has completed the good issue and goods receipt both.
Actually the status of this STO got completed after you post goods issue and goods receipt.
It is also like normal PO, when goods issue and MIRO has done, then you can set deletion flag to line item. System will allow deletion flag for archive process.
If you want to restrict that, then you have to use badi or exit for that by your own logic.
You can use the badi ME_PROCESS_PO_CUST.

Similar Messages

  • Valuation type in case of stock transport order

    Hi,
    We are spilt valuation.
    now we are doing stock transport order and it is asking for valuation type. while we dont want to enter valuation type in STO.
    as which material is to sent to plant, we know at that time of delivery.
    but during making STO system is asking for 'enter valuation  type'.
    How we can do the same.
    Regards,
    Santosh

    Hi,
    Since you have activated the split valuation for the material system is asking to enter the valuation type.
    Check the material master Accounting 1 view whether you have maintained valuation category?
    If you want Split valuation, maintain the valuation type in config settings in IMG & extend the material to the respective valuation type.
    Hope it helps.
    Thanks & Regards,

  • Account Postings in case Subscontarcting and Stock Transport Order.

    Hi All,
    Please help in understanding what account keys(G/L Accounts ) will be hit in the follwoing scenerios:
    1. Standard Subscontarcting Process during GR.
    2. Stock Transport Order , Delivery Type NL
        Movement Type , 641 and 101.
    3. Stock Transport Order , Delivery Type NLCC
        Movement Type , 643 and 101.

    Hi
    1. Standard Subscontarcting Process during GR:
    For eg) You are giving Components A & B to the SC-Vendor....and Getting back the Finished Product "C" from the SC-Vendor....
    Now during GR...If you have activated Price Diff. account for SC Materials for your Plant  in  OLMB -
    > GR -
    > Activate Price Diff. Acc. for SC Material for your Plant....then foll. posting lines will be created..
    Stock Acc. of F/G Product "C".... ..      BSX          Debited 
    GR/IR Clearing Acc.              .......       WRX         Credited
    SC-Vendor service Charges  .........       FRL          Debited
    Stock Acc.of Components A & B..........BSX          Credited
    Change in Stock Acc. of Comp. A&B....GBB-VBO  Debited(+)
    Change in Stock acc.of F/G Product "C".....BSV    Credited(-)
    Price Diff Acc......................................PRD   As per situation
    2. Stock Transport Order , Delivery Type NL
    Movement Type , 641 and 101:
    At Supplying Plant( During movement type:641)
    Stock Account of Supp.Plant.....BSX Credited
    Stock Acc. ofb Rec. Plant ........BSX Debited
    If you maintain Std. Price for the material at Receiving Plant and if there is any Price difference...then Price Diff.Acc. will be triggered....ie) AUM....
    At receiving Plant( for M.type:101) there will not be any acc.documents gennerated...
    3. Stock Transport Order , Delivery Type NLCC
    Movement Type , 643 and 101.
    At Supplying Plant(M.Type:643):
    Stock Acc.......................................BSX  Credited(-)
    Cost of Goods Sold Acc...................VAX  debited(+)
    At Receiving plant( M.Type:101):
    Stock Acc.......................................BSX Debited
    GR/IR Clearing Acc..........................WRX Credited(-)
    Reward if useful
    Regards
    S.Baskaran

  • Tables for delivery and stock transport orders

    Hi Members,
    I have a requirement where i have to display (in a report output) a requirement quantity of deliveries and stock transport orders which are displayed in MD04 transaction for particular material and plant.
    I don't know which tables these quantities sit into.
    If you know please help.
    Points will be suitably rewarded.
    Reagrds,
    Boby

    >
    Boby wrote:
    > Hi Members,
    >
    > I have a requirement where i have to display (in a report output) a requirement quantity of deliveries and stock transport orders which are displayed in MD04 transaction for particular material and plant.
    > I don't know which tables these quantities sit into.
    > If you know please help.
    > Points will be suitably rewarded.
    >
    > Reagrds,
    > Boby
    if you only have to display deliveries and stock transport orders you can take LIKP and LIPS for the deliveries and LTAK and LTAP for transport orders.
    for all the other elements displayed by MD04 we would have to know about your setup: are you using dispo-areas (which would populate tables MDMA ...) so in that case please provide more information.

  • Minimum order qty for Stock transport orders

    Hello
    I wonder if there is any way to make the following fields from the Sales org 1 view in the material master to apply on Stock transport orders (ME21N, with subsequent delivery created in VL10B):
    Minimum order qty
    Minimum delivery qty
    Delivery unit
    As of now in our system, it only works for Sales orders and related deliveries. But not for Stock transport orders with a supplying plant.
    Also, if there is any other way to implement minimum order qty funcitonality and delivery for Stock transport orders, pls advice.
    Thanks,
    OT

    Hello
    We are in an intracompany business case. The supplying and recieving plant are in the same company.
    The situation is as follows: we are planning all replenishment manually without any involvement of MRP.
    What we would like to achieve is the same functionality as of the minimum order/delivery quantities material master fields in the material master.
    So when the planner creates the stock transfer order, he keys in supplying plant, material and quantity manually, then the warning message about the minimum order qty should appear.
    So far I have not found any way to do this. Any ideas are greatfully received.
    BR,
    OT

  • Error occuring while creating a Delivery for Stock transport order

    Hi,
    I am getting error while creating the delivery for thr stock transport order.The error message is given below.
                                                                                    Error Log for coll. run 0001248218                                                                               
    4       6000038321 000010 Only 0 ST of material F784100 available                                   
         4       6000038321 000010 An item with no delivery quantity is not permitted. Item will be deleted. 
         4       6000038321 000020 Only 0 ST of material F784100 available                                   
         4       6000038321 000020 An item with no delivery quantity is not permitted. Item will be deleted. 
         4       6000038321 000030 Only 0 ST of material F784100 available                                   
         4       6000038321 000030 An item with no delivery quantity is not permitted. Item will be deleted.                                                                               
    The stocks are present in the plant.
    Can anyone help me to solve this issue?
    Thanks
    Srinivasan

    Hi,
    Check in
    SPRO--IMG-MM-IM and PI---stock determinationassign stock determination in applications---Inventory management
    Check for 641 or 647,there is a SD rule assigned.
    Regards,
    Deepak.

  • Commitment Item error in Stock transport order

    Hi all
    I have a stock transport order (STO) for a material non valuated in both sending and receiving plants.
    While creation , there is an error with respect to completion of an "committment item" *.
    If I input  the committment item in  STO create transaction in R3 , the STO is  saved  (permitting blank account assignment for the STO item  as intended)  and there is no further issue till post goods issue in sending plant or GR in receiving plant.
    The problem is however that this STO is triggered from APO and transferred via CIF to R3 while there is no chance to input the commitment item. This results into a CIF error with the STO not created  in both R3 and APO.
    Is there a way I could bypass this "committment stuff" in this situation?
    Thanks in advance
    Anton
    *The exact error message is as follows;
    "  No commitment item entered in item 00001 plant < >
       Message no. FI311
    Diagnosis
    The posted document contains at least one company code in which Funds Management, Cash Budget Management, or Project Cash Management is active. Therefore you must enter a commitment item in all involved company codes.
    Procedure
    Enter a commitment item.
    If you cannot enter a commitment item, check with your system administrator that your account assignment derivation is adjusted so that the system can automatically derive a commitment item from another account assignment, or from the G/L or cost element.   "

    Hi,
    Did you try using derivation rule using FMDERIVE in case funds management is active.
    Please also refer to the link below which guides on the item category to be assigned in Commitment item.
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/f0/ca5716260211d28a430000e829fbbd/frameset.htm
    Regards
    K.R

  • Stock Transport Order u2013 Duplicate goods receipt quantity

    We implemented the scenario: the stock transport order process with SD. To post the goods issue , we have created a new goods movement  type (937) with reference to the movement type: 641, to differentiate these movements of other goods movements that are made in the company, because in this case, for issuing plant it is necessary to manually confirm these goods issues in WM (We need use storage bins in issuing plant). The outbound delivery, in issuing plant, is created through the transaction VL10B with reference to Stock transport Order, and goods issues is posted using transaction VL02N. In receiving plant, we use transaction MIGO to post goods receipt.
    Then, when we post the goods receipt for one replenishment delivery in Transaction MIGO, the system issues error message: M7022 telling us: u201Cthat the stock in transit has been exceeded by XXXu201D. The difference between the stock in transit and the Quantity in Unit of Entry is exactly equal to the quantity that was reported in the goods issue in Issuing Plant (outbound delivery). That is, Quantity in Unit of Entry is duplicated with respect to outbound delivery quantity. But if the goods receipt is posted with reference to the stock transport order, the Quantity in Unit of Entry is calculated correctly and corresponds with the quantity of outbound delivery of the issuing plant. This does not happen when using the standard goods movement type 641. As mentioned above, we have configured Warehouse Management for issuing plant.
    The only difference between the standard scenario and implemented one in the company is the goods movement type, which is a copy of movement type 641. So, my question is: Can not copy the goods Movement type 641 (Transfer to stock in transit)? Please, I appreciate your support to resolve this issues.
    Best regards,

    All goods movements are being posted in the same unit of measure (base unit of measure ), since the material has no alternative units of measure configured. And we think that has to do with the movement type, because when using the standard movement type (641), the whole process is flowing properly. However, when using the new movement type, the system behaves the way it was explained earlier.
    Through various tests, we identified that the quantity is duplicated  when the table T321 (Assignment MM Movement Type --> MM-WM Movement Type) and  the IMG view V_156S_WM (Reference Movement Types for Warehouse Management) are set, since it also was created a new movement type for WM. For this reason we think that the problem lies in the configuration of the new movement type.
    Anyway, thanks for your help.

  • Overdelivery in intra-company stock transport order

    Hello,
    I have the following scenario - I have two plants, 1000 and 2000, both under the same company code.
    I transfer 450KG of material 123456 from plant 1000 using STO with SD (mvt. type 641), material is packed in HUs. In the receiving plant, the HUs are being place on a weight to check their actual weight. It;s possible for the actual weight be greater than the GI weight of 450KG (for example, due to weight scale accuracy issues) . When doing GR, I need to be able to receive quantity greater than the GI quantity. That is not allowed in stock transport order (per note 212387). For the same scenario with intercompany STO (GI mvt type 643) I'm able to post GR quantity which is greater than GI qty.
    Any suggestion on how to solve this? Can I create a customer order type that is both intra-company and allows for overdelivery?
    Thanks,
    Yossi

    a overdelivery does not make any sense in stock transfers, you would solve the problem of the stock accuracy in the receiving plant, but at the same time you create another problem with a negative stock in transit, that never gets cleared.
    a STO having stock left in transit is never considered as closed. even intercompany stock transfers are not considered as closed, even you can receive more than issued.
    Latest when archiving purchasing documents then you will see all your error in the process design, because only closed business cases can be archived.
    in stock transfer business you always have to care about both sides, you cannot just care about the receiving plant and ignore the problems of the sending plant.

  • Automatic delivery for stock transport order

    Hi,
    with ECC6 you have the possiblity to automatically create the delivery out of the stock transport order (STO) using the following customizing steps in SPRO:
    Materials Management ->Purchasing->Purchase Order->Set up Stock Transport Order->Activate Automatic Delivery Creation and CRM Billing
    Materials Management ->Purchasing->Purchase Order->Set up Stock Transport Order->Activate Automatic Delivery Creation for PO Type and Shipping Point
    We want to use a batch job that runs ME59N to autmatically convert the purchase requisitions to STO and deliveries. While testing we found out that ME59N gives a warning when the availability check in the STO is running in case there is not enough stock. But you still can create STO and delivery.
    In case you only create a STO and put it in VL10B to create the delivery it will only create delivery items with the quantities that are available in warehouse. So no stock means no delivery at that time.
    Is it also possible using ME59N to
    a) not create STO and delivery in case there is no stock
    b) only create STO and no delivery in case there is no stock
    Cheers
    mickey

    Hi,
    Setting to error message not possible as this would cause all STOs not be convertered where no stock is available. But we need this functionality only for one specific process.
    Omit faulty items we also tested and did not provide the result we need. It is related to faulty purchase requisition items.
    Cheers
    Mickey

  • Stock Transport order issueing storage location determination

    Folks,
    In case of a Stock transport order scenario in which plant A with SLOC1 delivery to plant B with SLOC 2. Is there any option how the issueing storage location can be determined? The delivering plant can be determined through the special procurement key but there is no option for the issueing SLOC.
    Regards,
    MdZ

    Hey Karen!
    I am not sure if I understand your problem correctly.
    You do not want the system to create a new MARD entry when postin goods issue.
    You can enable/ disable this function with transaction OMB3 in the customizing.
    have fun
    Flo

  • Stock transport Order does'nt appear in VL10B

    Hi,
    I have created a stock transport order. And when i try to go for VL10B. The Order does'nt appear there.Can anyone help me?
    1)I have made entries in T161W
    2)Shipping tab is appearing in the STO
    3)Done all possible config..
    can anyone help me...

    Hi,
    Delete all your delivery date entries and execute, SAP should give a report.
    Thanks
    Silas

  • Change the valuation class of material [Stock transport order scenario]

    Dears,
    Client would like to change the valuation class of material.
    There is no open Purchase order/Process order/Purchase requistion and stock in plant.
    Scenario- One Stock transport order is created.
    For same goods issue (351-issuing plant) and goods receipt (101-receiving plant) is done.
    When we are going to change the valuation class of said material, message is "purchase order is open
    and it shows the no of STO [for which receipt and issue is done]"
    To resolve this issue we had first delete the STO line item no(ME22N). Then change the valuation class.
    (this allows). and then undelete the STO line item. Through this we can change the valuation class of material.
    Please advise in such business process that this is right way or there may be other option.
    Thanks & Regards
    Rajan

    rajanshah219,
    Here's my take on how to fix:
    *Manually change Config TCode OMT4 - change message MM 326 & 327 to type "W"   (if open order exists...now you can enter through warning messages)
    *If inventory exists, then issue out of stock to a cost center
    *Change valuation class
    *Put stock back into inventory (reverse to that same cost center)  Note issue out and reverse back into inventory must happen in the same posting period.
    **Valuation class should be changed as expected
    **Manually change config  TCode OMT4 - change message MM 326 & 327 back to type "E"
    Thanks,
    Jason

  • Procurement cycle in third party order and stock transport order.

    please provide me in steps the procurement cycle in third party order and stock transport order.

    Hi,
    STO Process: -
    1.Create a vendor for the company code of receiving plant, using account group :0007 using T-Code XK01.
    2. Assign this vendor to Delivering plant
    Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
    3. Create internal customer with the sales area of the vendor. Go To XD01
    4. In Pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
    5. Maintain condition records for the relevant pricing condition.
    6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
    7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
    8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
    Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
    9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
    Assign the document type NB to supplying plant and receiving plant
    10. After all settings , Create the STO using T-Code:ME21N and maintain pricing conditions of freight and Save.
    11. Create Delivery :VL10G
    Click on the Background Button after selecting line item
    A message is flashed : See log for information> next Click on Log for delivery creation Button >click on line item>click on document button to get Delivery document No
    12. Picking, PGI:VL02N
    13. Billing:VF01
    Save the document and its done
    14. J1IIN - Outgoing Excise Invoice
    15. MIGO - Goods Receipt against outbound Delivery
    16. J1IEX - Capture & Post Excise Invoice
    Pricing configuration for STO: -
    In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
    Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
    You can create new freight / delivery cost conditions in M/06 and assign in pricing procedure "RM2000" in M/08 and also assign the Accrual Key to this and do the Account Determination for this Accrual Key in OBYC
    At the time of PGI, following accounting entry will get generated;
    Stock A/c - Dr - 110 INR (Receiving Plant)
    Stock A/c - Cr - 100 INR (Supplying Plant)
    Freight Clearing A/c - Cr - 10 INR (Supplying Plant)
    Third Party Process Flow: -
    1) MM01 - General Item category Group should be BANS in basic view of material master.
    2) VA01 - Creation of sales order with VA01 transaction in SD module
    3) When sales order is created system automatically creates a PR for the material with item category as "S"--> Third Party Item
    4) ME21N - Directly PO with item category as "S" and delivery address as customer address
    5) MIGO - Statistical GR by MM ( When it is made goods are received and delivered)
    6) MIRO - Invoice by MM for vendor
    7) VF01 - Billing by SD on Customers

  • Freight cost within Stock transport order

    Hi MM experts,
    We have created a stock transport order to shift material from one plant to other plant and want to book the freight cost while receiving the same material at receiving plant during MIGO.
    The problem we are facing is, that no accounting document gets generated by the system while doing MIGO against delivery created for STO
    The prompt response for the same will be highly appreciated please.
    Regards,
    Pawan Khurana

    Hi
    I believe you might be using STO without delivery.
    In case of stock transport order, the material document associated FI document will be generated during GI.
    So, please display the GI document (mvmt type 351) and check for the FI document.
    warm regards
    sairam akundi

Maybe you are looking for