Stop all movieclips on stage and it's nested movieclips

Looking for a way to stop all movieclips both are the stage and that are children of the ones on the stage.
I toyed with looping thru stage's children so I can first target clips on the stage. But I am getting error. Any help?
for (var i:int = 0; i < this.numChildren; i++)
if (this.getChildAt(i) is MovieClip)
this.getChildAt(i).stop

You will get a different error if that was just a typo... a 1119 is a property error, a 1061 is a method error, which is what you should have been getting if you just had a typo in your posting and not in your code. In any case, try casting the object to be a MovieClip and that should solve the probem...
if (this.getChildAt(i) is MovieClip){
MovieClip(this.getChildAt(i)).stop();

Similar Messages

HT2510 having issues with Garage Band stating disc too slow...i have stopped ALL other apps, restarted and still having same issue....Please help!

i have not been able to replay older Garage Band productions I have done. I got one to play and then when I edited and saved said did i want to save to newer version. I said ok...But getting repeated error that disc too slow and then starts playing in timeline but no audio then says Garage Band not responding.
Please advise...

Just some thoughts: You have an older Mac, so that could be part of the problem. You may have processes running in the background, or perhaps your disk is too full. Look in the Apple Knowlege Base for things like Startup Items, Launch Daemons, etc and see if you have any that you can get rid of. Also check your HD available space. If it's too full, your files are probably fragmented and spread all over the disk, which might make it respond too slowly.

Creative suite master collection cs6 needs an upgrade to stop all error reports

I have been advised by Apple and the people who supplied my laptop that my creative suite master collection cs6 needs an upgrade to stop all my error reports and to get the programs to run smoothly.
I have been told theat Adobe can supply me with one?

In general CS6 should run fine under Mavericks. If you have a particular application you use a lot, like Premiere Pro, ask in that forum.

Is there any way to save an image from a nested movieclip as a .png using PNGEncoder

Hello all,
I am new to AIR and AS3 and I am developing a small AIR desktop application in Flash CS5 that saves a user generated image locally to their computer.
The image is generated from a series of user choices based on .png files that are loaded dynamically into a series of nested movieclips via XML. The final image is constructed by a series of these "user choices".
Sourcing alot of code examples from here and there, I have managed to build a "working" example of the application. I am able to "draw" the parent movieclip to which all the other dynamic movieclips reside and can then encode it using PNGEncoder. The problem is that the images loaded dynamically into the nested movieclips show as blank in the final .png generated by the user.
Is there a way to "draw" and encode these nested movieclips or do I need to find another way? I can provide my clumsy code if required but would like to know if this concept is viable before moving any further.....
Thanks in advance....

Thanks for the files.......
Yeah I'm doing it in Flash but importing the images via an xml document. The problem isn't in being able to view the eyes (based on the selection of the user) its when I go to save the resulting image as a .png. When I open up the saved .png the eyes are blank even though they are visible in the swf
Even when the user clicks on the option to copy the image to the clipboard, it works as intended.
My only guess is there is an issue with the way my xml is loading (but this appears to work fine) or when the file is converted and saved.....
As I said I'm still learning but surely there must be a simple answer to this....
I have included the xml code I am using and also the save code to see if anyone spots an issue..... (I hope I copied it all)
// XML
import flash.net.URLRequest;
import flash.net.URLLoader;
var xmlRequest:URLRequest = new URLRequest("imageData.xml");
var xmlLoader:URLLoader = new URLLoader(xmlRequest);
var imgData:XML;
var imageLoader:Loader;
var imgNum:Number = 0;
var numberOfChildren:Number;
function packaged():void
rawImage = imgData.image[imgNum].imgURL;
numberOfChildren = imgData.*.length();
imageLoader = new Loader ;
imageLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, loadedImage);
imageLoader.load(new URLRequest(rawImage));
faceBG_mc.Eyes.addChild(imageLoader);
function loadedImage(event:Event):void
imageLoader.x = -186;
imageLoader.y = -94;
imageLoader.width = 373;
imageLoader.height = 186;
// Clipboard
btn_Copy.addEventListener(MouseEvent.CLICK, onCopyClick);
function onCopyClick(event:MouseEvent):void
var bd:BitmapData = renderBitmapData();
Clipboard.generalClipboard.setData(ClipboardFormats.BITMAP_FORMAT, bd);
function renderBitmapData():BitmapData
var bd:BitmapData = new BitmapData(faceBG_mc.width,faceBG_mc.height);
bd.draw(faceBG_mc);
return bd;
// Save faceBG_mc as .png
var fileRef:FileReference = new FileReference();
var myBitmapData:BitmapData = new BitmapData (faceBG_mc.width,faceBG_mc.height, true, 0);
myBitmapData.draw(faceBG_mc);
var myPNG:ByteArray = PNGEncoder.encode(myBitmapData);
function onSaveClickPNG(e:Event)
fileRef.save(myPNG, "myPNG.png");
So my problem is....
The final image is copied to the clipboard with the eyes visible - yes
The eyes appear in the image in the swf as intended - yes
When the image is saved as a .png and is meant to include the eyes, they are blank (see picture above)
I hope this helps.....
Thanks in advance

AS3: Duplicate MovieClips - stop all on start and play only one on MouseEvent

I have a bunch of copies of the same MovieClip that are dynamically created I want them to be stopped when the swf first starts. When I click on one of them I want that particular one to play. I think that I've figured out how to play a single MovieClip with event.currentTarget.play(); but I am stuck on how to stop all the clips from the start. I thought I could just use a instanceName.stop(); in my for loop, but no go.
Below is a simplified version of my code:
//build scroller from xml file
function buildScroller():void{
     var tl:MovieClip=this;
     for (var i:Number = 0; i < xmlData.sound.loc.length(); i++){
        //create movie clips
        var boxContainer_mc:boxContainer = new boxContainer();
        addChild(boxContainer_mc);
        boxContainer_mc.x = 325 * i; // set the number here to the width of the movie clip being repeated
     boxContainer_mc.stop();
        tl["snd"+i] = new Sound();
        tl["snd"+i].load(new URLRequest(xmlData.sound.loc[i]));
        boxContainer_mc.snd = tl["snd"+i];
        boxContainer_mc.addEventListener(MouseEvent.CLICK, playSound, false, 0, true);
function playSound(event:MouseEvent):void {
     event.currentTarget.snd.play();
     event.currentTarget.play();
I'm an artist working on a piece where I am cataloging sound recordings from people (eventually recorded live from the site... but that's a battle that I'll deal with in phase 2 and after I have a bit more actionScripting under my belt). I just wanted to explain myself a bit since Kglad, Ned, and dmennenoh have helped me a bunch through the development of the project. If your interested you can check out some of my works on my website. I know, I know... I need to update the site, but its more fun to work on new projects. Oh, and I don't care what you say... I still love animated gifs.

Ok, I got a most of the issues figured out. But, I still have one more problem. I have a sound_complete event listener that I want to tell an movieclip to play. My problem is that I don't know how to reference that movieclip. Before I was using currentTarget to point directly at the movieclip that was clicked... but this time no movie clip has been clicked.
Basically all of my questions have been based around the same lack of conceptual understanding. Could someone explain to me exactly how the different movieclips or instances are referenced once created dynamically? When they are dynamically created is there an instance name that is created along with it? The swf file must reference them seperatly in some way... it's just not evident to me.
Below is the test script that I have that is working. I want the testing function to play the clip that was originally clicked (right now its just sending out a trace). In other words: a movieclip is clicked, the movie click plays (until it hits a stop(); in its own action layer), an mp3 file plays, the mp3 finishes, the movieclip continues playing (until it reaches a stop(); at the end of it's own actions script layer).
for(var i = 0; i < 3; i++){
    var a = new test();
    addChild(a);
    a.x = 20 + (i * 150);
    a.addEventListener(MouseEvent.CLICK, doPlay);
    a.stop();
     a["snd"+i] = new Sound();
     a["snd"+i].load(new URLRequest("creak128.mp3"));
     a.snd = a["snd"+i];
     a.addEventListener(MouseEvent.CLICK, playSound, false, 0, true);
function playSound(event:MouseEvent):void {
     var voice = event.currentTarget.snd.play();
     voice.addEventListener(Event.SOUND_COMPLETE, testing);
var temp:MovieClip;
function doPlay(e:MouseEvent){
    e.currentTarget.play();
function testing(e:Event){
    trace("test works");

How can I remove a child swf and stop all sounds when parent closes?

Hi All,
I am new to actionscript 3 and trying to learn as I go. The problem I am having is the following:
I have a carousel of images that load an external swf movie with a FLVPlayback component on it. The problem is that when the external swf unloads the sound of the FLVPlayback component continues to play. I am using a carousel component I found online to load the images and each image loads an external swf file. here is the code for it.
import com.carousel.DegreeCarousel;
import com.carousel.data.CarouselDO;
import com.carousel.data.AngleDO;
import com.carousel.data.ItemDO;
// DEFINING THE CAROUSEL OBJECT
var carouselSettings:CarouselDO = new CarouselDO();
carouselSettings.radiusX = 300;
carouselSettings.radiusY = 0;
carouselSettings.fov = 50;
carouselSettings.transitionTime = 1;
carouselSettings.ease = "easeInOutQuint";
carouselSettings.useToolTip = 0;
carouselSettings.useBlur = 1;
carouselSettings.maxBlur = 8;
carouselSettings.reflectionAlpha = 0.2;
// DEFINING ANGLES SETTINGS
var angleSettings_arr:Array = new Array();
angleSettings_arr[0] = new AngleDO({angle:0,alpha:1,scale:0.5});
angleSettings_arr[1] = new AngleDO({angle:90,alpha:1,scale:1});
angleSettings_arr[2] = new AngleDO({angle:180,alpha:1,scale:0.5});
// DEFINING THE ITEMS
var prefix = "content/thumbs/"
var galleryItems:Array = new Array();
galleryItems[0] = new ItemDO({thumb:prefix + "image_1.jpg", content:prefix + "swf1.swf", contentType: "flash"});
galleryItems[1] = new ItemDO({thumb:prefix + "image_2.jpg", content:prefix + "swf1.swf", contentType: "flash"});
galleryItems[2] = new ItemDO({thumb:prefix + "image_3.jpg", content:prefix + "swf1.swf", contentType: "flash"});
// PLACING THE CAROUSEL TO STAGE
var carousel:DegreeCarousel = new DegreeCarousel(carouselSettings,angleSettings_arr,galleryItems);
carousel.x = stage.stageWidth * .5;
carousel.y = stage.stageHeight * .5;
this.addChild(carousel);
// KEYBOARD NAVIGATION
// KEYBOARD EVENTS
stage.addEventListener(KeyboardEvent.KEY_DOWN, keyDownHandler);
function keyDownHandler(e:KeyboardEvent):void
    // left
    if(e.keyCode == 37)
        carousel.left(1);
    // right
    if(e.keyCode == 39)
        carousel.right(1);
    // top
    if(e.keyCode == 38)
        carousel.prevCycle();
    // Down
    if(e.keyCode == 40)
        carousel.nextCycle();
    // Space
    if(e.keyCode == 32)
The external movie loads fine. Then the external swf calls for a second swf containing a video. This is the code that is used to load the swf:
import flash.net.URLRequest;
import flash.display.Loader;
import flash.events.Event;
import flash.display.MovieClip;
import flash.events.MouseEvent;
var myVideo:URLRequest = new URLRequest("myvideo.swf");
var video:Loader = new Loader();
video.load(myVideo);
this.addChild(video);
When the carousel unloads, it unloads both movies but the sound keeps on playing.
Is there any way to stop the sound from keep playing?
Thank you very much!!
-M

You want to stop the audio from playing and also downloading more video/audio if it is still downloading when you go to a new keyframe where the video display/component or mp3 player is removed from the stage because it's keyframe ended or do not exist anymore but you still hear the audio.
Add an event listener to your video playback component that calls a function when the flash player tries to remove the video plaer from the stage that stops the netstream or at least stops/pauses the video playback.
[link removed]
//sample NetConnection and NetStream classes when the video player is removed from the stage tell the NetStream to stop playing or downloading the content with .close();
var connection:NetConnection = new NetConnection();
connection.connect(null);
var stream:NetStream = new NetStream(connection);
addEventListener(Event.REMOVED_FROM_STAGE, videoRemovedFromStage);
function videoRemovedFromStage(e:Event){
   stream.close();

How to stop and resume the animations of nested movieclips

Hi
I have many nested movieclips in different positions of the main timeline.
I have 2 buttons, play_btn and pause_btn.
I'd like when the user click pause_btn, the animations on the main timeline and in nested movieclips stop.
Whe he click play_btn the animations resume in both the main timeline and nested movieclips.
I have created array of nested movieclips on the main timeline.
var arr:Array = new Array(mc1, mc2, mc3, mc4, mc5);
play_btn.addEventListener(MouseEvent.CLICK, on_play_btn);
pause_btn.addEventListener(MouseEvent.CLICK, on_pause_btn);
function on_play_btn(e:MouseEvent):void
     gotoAndPlay(currentFrame);
     for(var i:Number = 0; i < arr.length; i++)
         if(arr[i] != null)
             arr[i].play();
function on_pause_btn(e:MouseEvent):void
     gotoAndStop(currentFrame);
     for(var k:Number = 0; k < arr.length; k++)
         if(arr[k] != null)
             arr[k].stop();
but it only stops the animations on the main timeline and dosen't stop the animations in the nested movieclips.
Help me Please.

I'm having the same issue.I have a main timeline, which has nested movieclips with there own timelines and motion tweens. Using the new motion tween, and not the classic tween, which may or may not be the problem.
Was having a similar issue with stopping the timeline, the main timeline would stop, but the nested movieclips would keep going. Found this blog post that helped.
http://blog.nobien.net/2009/02/05/as3-stopping-all-timeline-animations/
Used the code below to stop everything by passing the stage as the displayObject. Worked great, but now i'm having the reverse issue. When I resume play, the nested movieclip timeline stays exactly where I stopped it, and the main timeline resumes play. If there are a 100 frames in the nested movieclip, once it reaches the 101st frame, the main timeline kicks in again.
function stopAllChildMovieClips(displayObject:DisplayObjectContainer):void{
        var numChildren:int = displayObject.numChildren;
        for (var i:int = 0; i < numChildren; i++) {
            var child:DisplayObject = displayObject.getChildAt(i);
            if (child is DisplayObjectContainer) {
                if (child is MovieClip) {
                    MovieClip(child).stop();
                    stopAllChildMovieClips(DisplayObjectContainer(child));

RemoveChild and Stop all Animation/Sound plz help!!

Hey hope someone can help me out with this, been stuck on this for a while now and tried a number of different way but no luck so far.
Im trying to removechild and at the same time stop all the on going animation and sound, in a way reset them so that if this child is added again it plays like it did the first time.
I've tried these scripts but non work, either i get an error or the sound doesnt stop and the animations stack:
//==================================================
1.
bgFarm.stopImmediatePropagation()
2.
while (bgFarm.numChildren != 0)
bgFarm.removeChildAt(0);
3.
gameMain_Controls.islandBG.removeChild(bgFarm);
===================================================
the bgFarm is added to the main background from another class
thx, hope someone can help
pavel

If all are done in script things are easier but I assume you're using timeline MovieClips. Generally speaking, stop() stops the timeline and removeChild() removes a DisplayObject (such as MovieClip) from a DisplayObjectContainer (such as Sprite and MovieClip). As for the sound, if you manage it by script it's easy to stop a sound with SoundChannel.stop(), but if your sound is on the timeline you have not much control. Either SoundMixer.stopAll() (but this stops ALL the sounds) or set SoundTransform volume to 0.

Stop all nested movieclips

Hello,
I made a series of nested movieclips, and to stop all motion i wrote this code:
on (press) {
MCinMCinMC.stop();
MCinMCinMC.MCinMC.stop();
MCinMCinMC.MCinMC.MC.stop();
MCinMCinMC.MCinMC1.stop();
MCinMCinMC.MCinMC1.MC.stop();
MCinMCinMC.MCinMC2.stop();
MCinMCinMC.MCinMC2.MC.stop();
MCinMCinMC1.stop();
MCinMCinMC1.MCinMC.stop();
MCinMCinMC1.MCinMC.MC.stop();
MCinMCinMC1.MCinMC1.stop();
MCinMCinMC1.MCinMC1.MC.stop();
MCinMCinMC1.MCinMC2.stop();
MCinMCinMC1.MCinMC2.MC.stop();
MCinMCinMC2.stop();
MCinMCinMC2.MCinMC.stop();
MCinMCinMC2.MCinMC.MC.stop();
MCinMCinMC2.MCinMC1.stop();
MCinMCinMC2.MCinMC1.MC.stop();
MCinMCinMC2.MCinMC2.stop();
MCinMCinMC2.MCinMC2.MC.stop();
This code works fine, but can somebody explain how to write this in a more compact way?

Thank you very much! This will save me an awful lot of typing.
The thing with me and actionscript is, when i read it, i understand what it does, but i have a lot of trouble writing it.

My ipad 3 stopped charging, not the adapter and reboot doesn't do anything. I've tried all the tricks and different adapters and now my nearest Apple store is saying it just doesn't work and it'll be $300 to replace. Only had it 1 yr and half.

My ipad 3 suddenly stopped charging last week. I've tried different adapters, to no avail. I didn't drop it or spill anything on it. I don't have tons of apps, so plenty of memory. My husband took it to the Apple store for me and they tried charging it too even though I knew that wasn't the problem and then said it wasn't working (no kidding) and then told him it would be $300 to replace. Seeing as I've only had it for a year and a half and it cost more than twice that to begin with, I'm a little ticked that it stops charging, a problem I know is very common according the all the message boards and they want to charge me $300. I've always heard that Apple was so good to it's customers, but my iphone has been a nightmare, and now my ipad won't charge. Also, I've tried the reset options I've read about and none worked. Sorry, just really upset. I thought I was paying all this money for better quality and now I feel foolish for having done so. Anybody with any ideas I, or the genius at Apple haven't thought of? Help is appreciated. Thanks.

May be some help on one of these links.
Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

A lot of tabs loads and tells me there was a problem loading the page. How can I stop all the tabs loading because ist slows down Firefox.

When I open Firefox, a lot of tabs try to open at the same time. They all say Problem loading the page. It happened after I tried to download a owners manual for Harley Davidson motor cycles. How can I stop all but one tab from opening.

This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
See:
* http://kb.mozillazine.org/Session_Restore

How do I stop all the tab and pop-up adds?

Every time I click on something on the main tab, another one open with some type of add. Also, I want to stop all the pop-up adds. If this can't be done I will be uninstalling Firefox.

You also can check for an add-on causing this problem.
Disable ALL nonessential or unrecognized add-ons on these two tabs. Unless you know you can't live without it for 24 hours, disable it.
orange Firefox button (or Tools menu) > Add-ons > Plugins category<br>
orange Firefox button (or Tools menu) > Add-ons > Extensions category
If you see a link above an extension to restart Firefox, you can wait until you are done with your changes and then click that as the last step.

Ever since I updated my iPhone 4S and my iPad 2 to IOS 6 all my iMessages are coming to both my iPhone and my IPad. How do I stop the iMessages I send and receive on my phone from receiving on my iPad as well? I have tried going into my settings and makin

Ever since I updated my iPhone 4S and my iPad 2 to IOS 6 all my iMessages are coming to both my iPhone and my IPad. How do I stop the iMessages I send and receive on my phone from receiving on my iPad as well? I have tried going into my settings and making sure I'm only set up to receive iMessages to my cell number and not my email....but that didn't fix the problem.

Here the way to do it, for both, or for only one Go into your settings, Messages and turn on iMessage. It will then send messages that are iMessages to both your iPad and iPhone. You can also turn off this feature on the iPad if you do not want to receive messages on the iPad.

I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working

I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working, I had windows XP and tried all solutions posted on online forums didn’t work, I upgraded to windows 7 and still not working, please note that the USB is detected in device manger and it says working properly but he webcam is not detected at all, also when I connect any device to USB it gives it power and I even can charge my cell phone but it doesn’t detect any device. Is there any genius out there that can help me?
Also after I installed windows 7 I went o system information----software environment--- system drivers, and I found all USB drivers stopped by the way this was the case in windows XP as well
usbccgp            Microsoft USB Generic Parent Driver   c:\windows\system32\drivers\usbccgp.sys         Kernel Driver   No            Manual Stopped           OK      Normal No       No
usbcir   eHome Infrared Receiver (USBCIR)    c:\windows\system32\drivers\usbcir.sys Kernel Driver   No       Manual            Stopped           OK      Normal No       No
usbehci Microsoft USB 2.0 Enhanced Host Controller Miniport Driver c:\windows\system32\drivers\usbehci.sys            Kernel Driver   No       Manual Stopped           OK      Normal No       No
usbfilter            AMD USB Filter Driver           c:\windows\system32\drivers\usbfilter.sys          Kernel Driver   No            Manual Stopped           OK      Normal No       No
usbfltr   Razer Copperhead Driver         c:\windows\system32\drivers\copperhd.sys       Kernel Driver   No       Manual            Stopped           OK      Ignore No       No
usbhub Microsoft USB Standard Hub Driver    c:\windows\system32\drivers\usbhub.sys           Kernel Driver   No            Manual Stopped           OK      Normal No       No
usbohci Microsoft USB Open Host Controller Miniport Driver c:\windows\system32\drivers\usbohci.sys          Kernel Driver   No       Manual Stopped           OK      Normal No       No
usbprint            Microsoft USB PRINTER Class           c:\windows\system32\drivers\usbprint.sys          Kernel Driver   No            Manual Stopped           OK      Normal No       No
usbstor USB Mass Storage Driver        c:\windows\system32\drivers\usbstor.sys           Kernel Driver   No       Manual            Stopped           OK      Normal No       No
usbuhci Microsoft USB Universal Host Controller Miniport Driver         c:\windows\system32\drivers\usbuhci.sys            Kernel Driver   No       Manual Stopped           OK      Normal No       No
uwbusb            UWB Bus Control USB-Miniport Driver          c:\windows\system32\drivers\usbuwbmini.sys    Kernel Driver   No       Manual Stopped           OK      Normal No       No

Did you ever get this resolved? I am having the same problem and have tried just about everything for my dv9000.

HT3529 my iphone just stop connecting to my wifi and i have tried all the recommended troubleshooting with no success. Also when i send a text , it shows it coming from my email address instead of my cell #. i cant get a text going to my cell #. help

my iphone just stopped connecting to my wifi and i have tried all the recommended troubleshooting with no success. Also when i send a text , it shows it coming from my email address instead of my cell #. i dont receive any text going to my cell #. help

If i understand what you are saying then you are seeing the WiFi indicator after connecting but Apps are saying that they are not connected to the internet?
Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be to restart your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

Stop all movieclips on stage and it's nested movieclips

Similar Messages

Maybe you are looking for