STOP/Avoid spam messages!!

Hi every body.. is there any way to eliminate the below mess!!
Identity: EXCH\7733\3079491551732
Subject: Undeliverable: Hurry up and buy online cheap hot products
Internet Message ID: <[email protected]>
From Address: <>
Status: Ready
Size (KB): 16
Message Source Name: DSN
Source IP: 255.255.255.255
SCL: -1
Date Received: 6/24/2014 6:33:15 PM
Expiration Time: 6/26/2014 6:33:15 PM
Last Error: 421 4.3.2 System not accepting network messages
Queue ID: EXCH\7733
Recipients: [email protected];2;2;[{LRT=};{LED=421 4.3.2 System not accepting network messages};{FQDN=};{IP=}];0;CN=Outgoing Send Connector,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange Administrative
Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=xxxf,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=xxxxf,DC=org,DC=iq;0
please advise if there are free tools or methods to apply filters!!
thanks in advance..cheers!

Sure, no worries.
About sender filtering -
http://technet.microsoft.com/en-us/library/bb124354(v=exchg.150).aspx
About blocking emails to block emails with blank senders
http://technet.microsoft.com/en-us/library/bb124087(v=exchg.150).aspx
Set-SenderFilterConfig -BlankSenderBlockingEnabled $true

Similar Messages

How to stop receiving spam messages blindly addressed to user "admin"?

I've done a bit of searching but can't seem to find any relevant posts, so I'm hoping someone can be of help.
I'm using MacOS X Server 10.2.4. My user account on the server is "alan", and I set it up in Workgroup Manager so that all email addressed to me at "[email protected]" is automatically forwarded to my pacbell.net address. All that is working fine.
However, when I check my email at my pacbell.net address, in addition to the forwarded mail addressed to "[email protected]", I am also getting a lot of spam addressed to "[email protected]". Evidently, many spammers will just blindly spam "[email protected]" assuming that it will be a valid account. So what appears to be happening is since my user "alan" on the server is also an administrator account, there is some sort of default alias connecting the user "admin" to "alan", which in turn is causing me to receive the spam messages. They must be blind, because I've never used or referenced the address "[email protected]" anywhere.
So, the big question is --- how can I delink the alias "admin" from "alan"? It does not appear as a shortname in the Workgroup Manager under the user "alan", so I can't delete the alias there. I'm guessing there's probably a file somewhere I need to edit to do this, but can't seem to find it? I would be fine with redirecting mail addressed to "admin" to a null account that doesn't have email active, so those messages will just bounce back to the spammers.
Alternatively, is it possible to simply reject all mail sent to "[email protected]"?
Any help is appreciated!
Many thanks in advance,
Alan

David,
That would make sense, since user "alan" is definitely a member of the group "admin".
I see that sendmail is installed on the system, though I'm not sure that sendmail is in fact what is running the mail sever (although it could be).
I discovered this much at least -- the command to start the mail server is:
/usr/sbin/MailService-autostart on
So it would seem that "MailService" might be the name of the server app, or something to that effect. If so, how can I modify its configuration files to avert this behavior? Or is there some way to blanket reject all mail send to "admin"? (sorry if I've been repetitive) ...

Spam messages and install a program to hear voice ...

Is anybody else getting spam messages over and over even if you have "blocked" and reported it as "Spam"? This morning I got another "same message" from v2098195567946. It is just one of many similar names from someone sending a Voice Message telling me to install a program. I get these over and over. Can't someone at Skype stop these spam messages? "Automated notification.... new video message recieved... to view video messages, install video player at viewin.com".
Yeah, right. Like I am about to install a program from that. Anybody else getting these?
Post transferred to create new topic;
subject/title edited accordingly.

yes I also am receiving these

Is anyone else receiving LinkedIn spam messages?

I am not even on LinkedIn, and yet I received two strange messages yesterday and today. One message says for me to stop sending spam messages for my business. As I said, I am not even a member of LinkedIn. Do you suppose someone I know, who has my email, has been affected by malware, and their contacts are being used fictiously? How do I make this stop?

I have two .mac addresses and as I said above, am a member of LnkedIn, but have not received any spam, so I doubt it's Apple's fault.

I use yahoo business mail, but I am getting hundreds of spam message on my Mac Air. I don't get them on my iPhone. Ive run a Malware app. Does anyone know how I can stop getting all this junk mail. Thanks

How do i stop getting spam coming to my mailbox using Yahoo Business mail? I use Yahoo Biz Mail, but am now getting a huge amount of spam. I don't get any using the same address on my iPhone. I ran a Malware app - didn't help. Any ideas??

Hello SkeeterOz,
It sounds like you’re seeing spam emails in the Mail application on your MacBook Air, but you aren’t seeing those spam emails on your iPhone. The article linked below will walk you through enabling Junk Mail filtering in Mail and specifying what you want to do with the emails that are filtered.
Mail (Mavericks): Change the junk mail filter
I hope this helps.
-Jason

Synergyc spamming messages.log

Just wanted to let you guy's know that if you follow the instructions on the archwiki for autostarting the synergy client using the /etc/rc.d/synergyc file, then you may want to edit the line that calls synergy to include "-d WARNING". This way only messages with level "WARNING" and above get added to messages.log.
Example spam messages:
May 26 22:30:46 localhost Synergy 1.4.6: 2012-05-26T22:30:46 INFO: entering screen
/build/src/synergy-1.4.6-Source/src/lib/synergy/CScreen.cpp,103
May 26 22:30:47 localhost Synergy 1.4.6: 2012-05-26T22:30:47 INFO: leaving screen
/build/src/synergy-1.4.6-Source/src/lib/synergy/CScreen.cpp,121
Example /etc/rc.d/synergyc
#!/bin/bash
. /etc/rc.conf
. /etc/rc.d/functions
#Put the server host name in the following line
SERVERALIAS="server-host-name"
PID=`pidof -o %PPID /usr/bin/synergyc`
case "$1" in
start)
stat_busy "Starting Synergy Client"
[ -z "$PID" ] && /usr/bin/synergyc -d WARNING "$SERVERALIAS"
if [ $? -gt 0 ]; then
stat_fail
else
/usr/bin/xset r on
add_daemon synergyc
stat_done
fi
stop)
stat_busy "Stopping Synergy Client"
[ ! -z "$PID" ] && kill -9 $PID
if [ $? -gt 0 ]; then
stat_fail
else
rm_daemon synergyc
stat_done
fi
restart)
$0 stop
sleep 1
$0 start
echo "usage: $0 {start|stop|restart}"
esac
exit 0
This is useful so that your messages.log isn't full of unimportant stuff if you're trying to debug other problems, also reduces the overall number of reads and writes which may be good for people running on SSDs (though the var directory should probably be put on a different HDD if possible in that case).

Awesome, I just did that.
https://wiki.archlinux.org/index.php/Sy … leshooting

Overload of the same spam messages

The verizon spam filter is the worst! For months now, I keep getting the same spam messages. i have forwarded them to the Verizon spam email address and move them to the spam folder. NOTHING WORKS!
How do I stop this? Ready to cancel Verizon completely. Had enough.........
HELP!

The same thing has been happening to me. I've had Verizon for over 10 years and have never had a problem. In the past 6 months I've had spam meesages every night, except for a few, and now it's worse than ever, all day and night. In the past 36 hours I've gotten 31 spam messages. Whenever I call or live chat they give me the same lame solutions. They tell me to create filters and act like their spam detector is working. They also talk to the "email" department who says the same. I just got off of the phone with them now and again to no avail.
I believe that this is Verizon's attempt to get people off of their email service. Many people nowadays have gmail, hotmail, etc. accounts and Verizon sees shutting down email as a great way to save money and maximize profits. About 5 years ago they got rid rid of Usenet access, earlier this year personal web space, I believe the next thing will be email. Give it another 2 - 3 years, maybe less. I also think that Verizon employees know this and the fact that there is lack of support for spam filtering.

Most effective way of avoiding spam

When needing to put an email address on a webpage, are there
any
particular methods that are better at avoiding spam?

Frankly, I don't worry too much about that. You can't tell me
that they OCR
every image on a page....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Joe Makowiec" <[email protected]> wrote in
message
news:[email protected]..
> On 29 Jun 2006 in macromedia.dreamweaver, Murray *ACE*
wrote:
>
>> a) put it on the page as an image
>
> Except that spambots can do OCR...
>
> --
> Joe Makowiec
>
http://makowiec.net/
> Email:
http://makowiec.net/email.php

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." I am the sole user- please help.

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." This is a stand alone computer and I am the sole user.   Please help.

This is a Microsoft Windows Issue.
From a MS Support Engineer:
"Hi,
·        Is the computer on a domain?
·        Is the issue isolated to only this software or you get the same error message with other software’s as well?
Try the steps below and check if it helps.
Step 1:
Run the software setup file as an administrator and check if it helps.
a. Right click on the setup file of the software that you are trying to install.
b. Select “Run as administrator”.
Step 2:
Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
Disable antivirus software
Warning:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 3:
a. Click Start, type "Local Security Policy" (without quotes) and press enter.
b. Click on Software Restriction Policies.
c. In the right pane, double click on the "enforcement".
d. Select “All users except local administrators”.
e. Click Ok and restart the computer and check if the issue is fixed."

How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

Mail App stopped downloading new messages from Gmail

I'm using MBP with OS X Lion.
I've been using Mail App for my two Gmail accounts. I also use two different types of mail downloading systems (POP and IMAP) for them. For some reason, the speed of downloading new messages started slowing down a few weeks ago; however, I could still use it until today. Today, it seems like it is completely out.
It just stopped downloading new messages completely.
For the POP account, it says:
There may be a problem with the mail server or network. Verify the settings for account “POP” or try again.
The server returned the error: The connection to the server “pop.gmail.com” on port 995 timed out.
For the IMAP account, it says:
There may be a problem with the mail server or network. Verify the settings for account “IMAP” or try again.
The server returned the error: The connection to the server “pop.gmail.com” on port 993 timed out.
The weird part is that I can still send an email out of those accounts fine.
I checked the settings for Gmail, and everything seemed just fine.
I tried to re-do everything so deleted the IMAP account. Now it shows the message below:
The Google IMAP server “imap.gmail.com” is not responding. Try checking the network connection, and that the server name is correct. Otherwise, the server might be temporarily unavailable. If you continue, you might not be able to receive messages.
I tried Connection Doctor and it shows as below:
I followed the suggestion by changing unchecking those boxes for SSL, but it didn't help either.
I tried "Rebuild" under mail box menu bar but it also didn't do anything.
Can anyone help me with this issue?
Thank you in advance.

By the way, my Mail App is version 5.3

How to avoid the message in the dashboard report

Hi,
I am developing Dashboard reports(graphs) using WAD. Query and WAD are working fine. I need to put a variable for Calendar Month or Year in the graph .I am populating the Variable with default value initially and I am getting the correct result . But if I change the Variable value second time, I am getting a message (type I(information) ) in the same screen which says that 'You cannot change variable ZCALYEAR_WT01 for charact. 0CALYEAR during query navigation' . And below is the detailed information about the error message.
The Can be changed in query navigation property has been set for variable ZCALYEAR_WT01, characteristic 0CALYEAR. However, the variable is used in the query in such a way, that the system is unable to apply this change-option.
This can, for example, occur under the following conditions:
Characteristic 0CALYEAR is filtered by additional restrictions (the restrictions must be joined using an OR-connection)
A second characteristic, which is restricted by a variable, is compounded to charcteristic 0CALYEAR.
Variable ZCALYEAR_WT01 is a hierarchy node variable, but the hierarchy has not been determined uniquely.
A variable can be changed during query navigation only if it is used exclusively in a drilldown-characteristic, and there are no further restrictions to the characteristic other than this variable. There must be no additional characteristics with variables compounded to the characteristic you are working with. For variables for hierarchy nodes, the hierarchy must be determined uniquely and agree with the set display hierarchy.
Also, if the characteristic value is moved, for example (ZCALYEAR_WT01 - 1), the variable is no longer able to be changed when navigating queries.
System Response
The entry ZCALYEAR_WT01 Can be changed during query navigation is not applied.
Procedure
I checked the query definition and it is not having any offset or any other restrictions for Calendar Year
It is used for finding the total quantity by country for the year .Hence Quantity keyfigure is added in the Keyfigures and Country is in the Rows and Calendar Year is restricted with Variable in the global filter .There are no other fields and no other restrictions .
I am still trying to figure out why the warning apprears in the DashBoard. Since this Dashboard report will be used by the Power users and this warning message will be annoying to them .Hence I need to find how to avoid this message.
Kindly do let me if anyone has faced this and solved earlier.
Thanks for your time.
Thanks & Regards,
Raja

Hi Nick,
Thanks for your suggestion and it worked for me I added the 'System message' web item and set the visibility to 'Hidden' .Now I am not getting any message. Thank you for both.
Thanks & Regards,
Raja

ITunes has stopped working error message on my Dell Latitude E6520 when trying to sync photos to my iPhone 3GS. Why?!

For some reason, I keep getting the "iTunes has stopped working" error message on my Dell Latitude E6520 when trying to sync photos to my iPhone 3GS. I am using Windows 7 on my 64-bit computer. iTunes will begin to optimize the photos in the folder I have directed it to (I am trying to load almost 3000 photos and videos), and it will go through optimizing all of them singularly, then get to the step where it says "optimizing" again, but does so in bigger groups. It will get to about 2000, and then the error message "iTunes has stopped working" will pop up, and say that "Windows must close the program and will search for a solution, and if it finds one, it will notify me". Why can't I sync these photos, and what can I do? Thanks so much for the help, I really appreciate it!

Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

I have the iPhone 4S and my daughter has the iPad 2, we share one Apple ID, is there anyway to stop her text messages from appearing on my iPhone and vice versa?

I have the iPhone 4S and my daughter has the iPad 2. We share my Apple ID. Is there any way to stop her text messages from appearing on my phone, and vice versa? She doesn't need to be reading my texts!

no, there currently is no way of doing this. You can only create a second Apple ID.

How do I stop MobileMe error message without a Preference Panel?

This MacBook running 10.6.8 has no MobileMe preference panel and no "ByHost" folder, so I can't follow the instructions found elsewhere here to stop the error message "You entered an invalid MobileMe member name or password. Verify your MobileMe member name and password in MobileMe System Preferences."
The error message keeps popping up and I can't figure out what program is producing it. I have removed the MobileMe account from iMail. I've checked iCal and Address Book, and they don't have MobileMe syncing turned on.

Removing the MobileMe account from Mail (not iMail) won't remove the account's setting for Outgoing Mail Server (SMTP). Look at the list in your remaining Mail accounts and delete the one for MobileMe. Otherwise, everytime you open Mail, that server connection will attempt to connect.

STOP/Avoid spam messages!!

Similar Messages

Maybe you are looking for