Stop COGI error recording

Hey All SAP Experts,
I would like to know if i it possible during the Backflush of components to not record any error in COGI screen even if there's insufficient stock in the time of confirmation ...
Thanks in advance...

Hello Mohammad
In the configuration screen of the 'Parameters of the Order confirmation' for the specific order type check in the Individual Entry General Tab in the Error handling sub-tab
Click on the Goods Movements checkbox, and it wil allow you to select the Termination for incorrect Goods movements. Tcode OPK4
it will not create log but it will terminate the session for incorrect postings, though it is not recommended please check if it helps to you.
Thanks
Ravindra

Similar Messages

  • Entering values in TableMaintenance,cursor does not stop at error record ?

    Hello,
    Very Good Morning!
    When creating new entries in Table Maintenance, Cursor does not stop at the error record. It display's an error where the error is. But, cursor will skip to the first field of the record.
    Ex : Sales Org, Mater, Sales Obj %, Frist arr date.
    Suppose these are the fields available and I want to create a new entry.
    When i enter incorrect value in Sales Obj %, it is displaying error message saying that i need to enter correct value. But the Cursor is skipping away to the first field Sales Org.
    PLease help what to do...I tried using set cursor. But, I am not sure how to excatly use it and it was not working. 
    Any help will be appreciated.....
    Thanks & Regards,
    Krishna Chaitanya

    Hello,
    This question is not answered.
    I want to close this question.

  • Is it possible to see how many COGI errors I have cleared in previous month and in which transaction I can able to see that record?

    Is it possible to see how many COGI errors I have cleared in previous month and in which transaction I can able to see that record?

    Mukundan,
    Refer Below SAP Note 1868084 - FAQ: Transaction COGI
    Question:
    Is it possible to log the actions in transaction COGI?
                  Answer:
    SAP Note 309050 provides a modification but it can only be used temporarily. Also refer to SAP Note 1894587 in this context. It provides a report for displaying and deleting the data records in the log table AFFWPRO.
    BR
    KK

  • In COGI error text "Multiple assignment of line item"

    Hi Guru,
    In COGI error text "Multiple assignment of line item"
    Description:
    ultiple assignment of a line ID
       Message no. M7357
    iagnosis
       An item table, in which the line ID (LINE_ID)
       was transferred to the function module MB_CRE
    ystem Response
       Processing is terminated.
    rocedure
       Contact the system administration.
    rocedure for System Administration
       There is an error in the calling application.
    Please help me to resolved this issue.
    Thanks and regards
    PNU

    Hi,
    Thanks for reply,
    It is possible to remove material from COGI list. We need to stop creation of this error.
    Is there other solution to control creation of error  "Multiple assignment of line item"
    Thanx & regd.
    PNU

  • How to show Session Error Records to End Users

    Hi all,
    I had to populate data using SESSION Method...
    I have 1000 records, out of which 750 records where updated correctly but i got 250 error records in it.
    i know that error records are stored in Error log/ INCORRECT SESSION in SM35.
    Now i want to modify these errounous records and repopulate them.
    Questions.
    1) We click on ANALYSE in SM35 to determine which sreen and value produced the error. if we have small data we can correct them interactively there only. But for 250 records how we have to correct them and upload 250 errors records.
    2) Can we download those error records into a flatfile.
    3) Is there any other method to handle such situation.
    Regards
    Surendar

    Vijay,
    I got your piece of code.... Its looking really good.
    Here my point is once that first validation is done i am doing exit. That means total  process stopped and cotrol comes out of the program. so how can this
    IF W_FLAG_ERROR = X. DISPLAY THE ERROR MESSAGE to the user
    will be executed ...............
    and
    bu writing it on the report list or just do LEAVE-LIST PROCESSING and come back to the selection screen. ESLE. CONTINUE PROCESSING ENDIF.
    I didn't fallow what u said here can u explain bit clearly plzzzzzz
    Nisha....

  • Logic to capture the Error records

    Hi All ,
               I have one scenario like this ,one report program runs in R/3 system to fetch some data from BW system .
    It uses Remote FM to do this .
    The problem is the FM has got error table with error msgs , if there is any problem in fetching the data in R/3 system.
    But when program is excuted it fails after returning to R/3 system with  error msg in WHEN OTHERS and stops there itself
    Instead it should proceed with other program codes and then
    finally output the error records .There is already subroutine in the program to display the erros records in last.  How do i do it programatically
    CALL FUNCTION 'ZC_BW_FIREFIGHT' DESTINATION p_r3rfc
          EXPORTING
            mrp_planning_scenario       = p_mrppln
            error_indicator             = p_info
          IMPORTING
            r3client                    = w_r3client
            r3instance                  = w_r3instance
          TABLES
            materials                   = t_bwmat
            plants                      = s_plant
            firefighting                = t_firefight1
            error_msgs                  = t_r3_errors
          EXCEPTIONS
            no_material_data_found      = 1
            no_storage_loc_data         = 2
            proc_complete_no_rcds_found = 3
            OTHERS                      = 4.
        CASE sy-subrc.
          WHEN 0.
            PERFORM f4020_confirm_fm_executed.
          WHEN 1.
            MESSAGE e999 WITH
                  'R3: No material data found for materials/plants.'(049).
          WHEN 2.
            MESSAGE e999 WITH
                  'R3: No storage location data for materials/plants.'(050).
          WHEN 3.
            MESSAGE e999 WITH
                  'R3: ZC_BWFIREFIGHT processed, but no data found.'(051).
          WHEN OTHERS.
            MESSAGE e999 WITH
                  'R3: ZC_BWFIREFIGHT FM call to R3 failed'(052).
        ENDCASE.
      ENDIF .
    ENDFORM.                    " f4010_call_zc_bwfirefight
    <REMOVED BY MODERATOR>
    Kumaran.C
    Edited by: Alvaro Tejada Galindo on Feb 25, 2008 2:46 PM

    Try with the following method
    DATA : bapireturn TYPE TABLE OF bapireturn WITH HEADER LINE.
    CASE sy-subrc.
      WHEN 0.
        PERFORM f4020_confirm_fm_executed.
      WHEN 1.
        CALL FUNCTION 'BALW_BAPIRETURN_GET'
          EXPORTING
            type                       = 'E'
            cl                         = <msgclass>
            number                     = '049'
            par1                       = 'R3: No material data found for materials/plants.'
          IMPORTING
            bapireturn                 = bapireturn
          EXCEPTIONS
            only_2_char_for_message_id = 1
            OTHERS                     = 2.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ELSE.
          APPEND bapireturn.
          CLEAR bapireturn.
        ENDIF.
      WHEN 2.
        " Do Simillarly
      WHEN 3.
        " Do Simillarly
      WHEN OTHERS.
        " Do Simillarly
    ENDCASE.

  • Cogi Errors due to Material Substitution

    Hello,
    In plant 0162 we have cogi errors that I can not explain. It is related to material substition and BOM changes.the COGI error comes from the component material 10085940 in order 100239889. this material 10085940 was set for material substitution for material 10007152 on September 7, 2008 effective when i refer to BOM but the production order was created this august.why do we have this COGI error? we have 10007152 in house and none of the 10085940 material please answer and explain why this happen?
    More thanks,
    Ryan

    Hi,
    Where could i see this percentage for this in BOM? i have noticed in the production order compenet overview of my material the two material was there already both backflushing indicator was check, discontinuation column was populated on both material = 1 (simple discontinuation - maintain in master record). could this be a factor? why does my production order pick both this two material in its BOM 10085940 will be effective on 07.09.2008 this is weird and problematic to us.
    Please advice what happen and fixed this one my cogi error said enter storage location for this 10085940 component.
    and in CS03 when i look at the BOM:
    10074921 (valid fr) 14.05.2008 (valid to) 07.09.2008 (change # 500001258 (change # to) 500001311
    10085940 (valid fr) 07.09.2008 (valid to) 31.12.9999 (change # 500001311 (change # to ) blank
    Please any help with this one for me to resolve this issue expert. please
    Thanks
    Ryan
    Edited by: Ryan Lazaro on Aug 22, 2008 10:22 AM
    Edited by: Ryan Lazaro on Aug 26, 2008 4:30 AM

  • Error Records-File-To-Idoc

    Hi all,
    In processing of File-To-Idocs, if we get any error in particular record by the follwoing situations how XI will handle,
    1) Wrong value in record.
    2) Due to strcuture change happend to the particular record
    3) value range is different than expected
    Is the total process stops or the correct record posts and error records will not post in the system.
    Regards,
    venu

    Hi Sravya,
    What my main concern is If I'm using Message Mapping tool for mapping (value mapping/structure mapping)
    Some records are might processed correctly and relavent Idocs are created some are not went fine not created any idocs In this case what happence?(Assuming each record will be an Idoc)
    What I have a plan is error messages anyhow will be shown in RWB, I'll search for relavent table and send those messages to relavent person.
    There might be another ways, but I'm using XI just now, I don't know how to use the Java code which u suggested to read.means where exactly i should insert this code to work on file and generates XML message and will be inout to target.
    Expecting an easy solution for me.
    Regards,
    venu.

  • What happens when error record

    Hi ABAP Gurus,
    Iam phaneendra can anybody explain in detail
    what happens when there is an error record exist while updating a session in session method and in call transaction.
    ie, out of 10 records 7th one is error let it be then what happens to 6 redords that 7th record and 8th 9th 10th records.
    and also what is assychronous and synchronous
    process .thatly in updation.
    good answers( helpful answers must be rewarded)
    regards,
    phaneendra.

    Hi,
    In Session Method all the 9 records will be updated except the &7th record(error record). u can get the error information in SM35.
    In call tranasction method it depends upon the mode(A,N,E). In all screen mode system will stop at 7th record and all the previous 6 records will processed. In No screen mode all the 9 records will be updated except the 7th record(error record). and track the error u have to use BDCMSGCOLL in ur program(for call transaction).
    Asyn-- System does not wait for Acknowledgement. but in Syn--- System waits for acknow.  For this reson Asyn process is fast as compare to Sync.
    Thnaks,

  • LSMW error records

    Hi,
    One basic doubt..when we use LSMW for conversion of huge amount of any data.For e.g if we have 1000 Customer Master records in the input file. After running the LSMW, if many posted successfully and if few fail due to data error, how will trace the error records? How can we get those error records alone, to send it back to the Legacy system, for them to correct and resend those records again?
    And how else can we avoid duplication?
    Thanks
    Swetha.

    You can use the Report RSBDC_PROTOCOL to get the log of the session.
    One thing you can do is, run the same session again with the mode "Error only". System will stop at the errors. Correct those errors manually.
    Regards,
    Naimesh Patel

  • "Recording Error: Recorder Captured No Frames"

    Hi all,
    I'm very frustrated right now because I'm not sure what I'm doing wrong. :(
    I have a Canon HV20.
    I have it connected to my PC (Running Windows XP) via Firewire.
    PE4 DOES recognize my camera because when I hit "Get video" on the capture panel. my camera does start playing the video and I see the timer on the capture panel.
    However, if I get "Stop Capture", I get the error mentioned above:
    "Recording Error: Recorder Captured No Frames."
    The capture panel is also BLACK when it's supposedly capturing the movie.
    Is there a setting on my camera or PE4 that I don't have correctly set?
    I'm really not sure what I'm doing wrong...
    I could use any help you're willing to offer.
    Thanks very much!
    Ted

    When you start a new project, click on the Settings button and choose the presets that fit the workflow for your project. If you're just working with standard definition DV, select that.
    If you are working with standard DV, you'll get the best results if you downsample the video to standard DV as you capture it, as described in our FAQs.
    http://www.adobeforums.com/webx/.3bc434fa
    You'll also find lots of great tutorials and lots of my helpful "Steve's Tips" articles at our "sister" site http://www.muvipix.com.
    Muvipix is a site set up by several of this forum's regular, with some help from Adobe, to support amateur and semi-professional videomakers. Registration is free, and that gets you access to the forum and lots of ad-free display space. On the products page, you'll find dozens of free tips, tutorials, motion backgrounds, DVD templates, sound effects, royalty-free music and stock video clips. Hundreds more are available for individual purchase or, for a small annual subscription fee that we use to keep the site running, you can have unlimited downloads from the ever-growing library of support materials and media.

  • About "the hospital for the error records"...

    Hi folks,
    I am new to ODI, and I am not buying the idea of "the hospital for the error records". In my personal opinion it introduces many complications. If some dimension records are "dirty" and we put them in the error table, then we are splitting the natural relation of the data, aren't we. The DWH data won't correspond to the source anymore, the dimension's data will be artificially split (the error records could apear on the next day), and we will need an additional process which should update the corresponding fact records on the next day (late arriving changes for the existing facts). Sounds much more complicated, than just to allow the ETL process to fail, fix the issue and start it again.
    Experts, please, help with an opinion.
    Thanks in advance!

    @DecaXD, thanks for your comment.
    "after that under my opinion "something is better than none"" This is exactly what I am worried about. The whole "hospital" idea, is something, which makes the whole process more complicated, without clear benefits. I like the idea to have E$ tables, but just for debugging purposes, just to be able to identify quickly, what were the error rows, so I can do a investigation based on failed data. What, I don't like is the idea that we can EASILY reuse the error data to recover the DWH state later.
    "Are you sure that you want to stop ALL your datawarehouse because the Address field is null?"Well, if during the analysis phase (especially, the data profiling step), we missed the fact that the address table could be null, then yes, I would like to stop the whole ETL, because this is situation, which has not been addressed correctly during the design of the ETL process.
    A rithorical question: Are you going to keep recovering the null records after each run (even a "successfull" one), or you would fix the interface/mapping to allow nulls, which would be updated on subsequent runs naturally ?
    What about more complicated error rows, like missing dimension key, which relates to many fact records ? Should we put the related fact records in their E$ table either. What if we have a snowflake design with many references to/from the error dimension records. Sounds too complicated for me.
    I would just store the error rows, and stop the ETL. Note, that I allow for dellay, but don't publish any not consistent data in the DWH.
    Bellow is a quote from the book you mentioned:
    "Don’t overuse the reject file! Reject files are notorious for being dumping
    grounds for data we’ll deal with later. When records wind up in the reject file,
    unless they are processed before the next major load step is allowed to run to
    completion, the data warehouse and the production system are out of sync."
    I am looking for more arguments, I do understand that it is not a simple issue, but I would like to see your real life experience here..
    Thanks!
    Edited by: hayrabedian on 2013-4-29 14:01
    Edited by: hayrabedian on 2013-4-29 14:02

  • Cogi error - Pipeline/consignment movement posted without value

    Hi
    I am getting a Cogi error Pipeline/consignment movement posted without value
    This particular material was not having problem till last week and now all the time when confirmation of production order happens it goes to cogi with error
    Price is maintained in info record
    Please suggest

    Dear friend,
    some theory:
    You always have 2 options - delete or process your COGI record.
    Before to make a decision you need to analyse/find a reason why this error has happened.
    run COGI;
    tick your eror;
    hit F6 (display errors) - bell icon
    now you are able to see the reason.
    depends on a reason (information you see now) you do your next steps
    say, for instance, you did something to fix the reason,...
    then
    if you want to process, tick your error and Save
    if everything is okay - system will POST it (cogi record will go away)
    or , say, you do not care about the error -
    tick your error and Delete
    some practice:
    please have a look at your material - probably someone changed it very recently - look at last changes using MM04 or MM03
    good luck

  • How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

    how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

    It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

  • Error Record in report

    Hello ,
    I have a issue on Report that is Developed on a Multiprovider .
    Problem : There is a report on multiprovider . Multiprovider consist of DSO and Infocube .
    Before Changes : There is a error record in the CRM tables which is fetched by Infopackage . record was like "Number"
                                  The quotes needs to be removed . Through DTP (FULL) data supplied to DSO .
    After Changes : The Error records get corrected .Now till PSA record is fine .DTP is FULL to DSO .
    But when i am reporting on that Multiprovider that error record is still there in the report and corrected record is also there .
    Please help.
    Thanks ,
    Rahul

    Hi Rahul,
    Did you delete your earlier request (the one containing the error record) from the PSA before executing the DTP?
    You can follow the below steps now to correct your data ->
    1. Delete all data from DSO.
    2. Check the PSA, delete all other requests except the latest one.
    3. Load data from PSA to DSO by DTP.
    Hope this helps!
    Regards,
    Saurabh

Maybe you are looking for