Stop F8 from playing presentation?

I just started using Keynote instead of powerpoint for school. Powerpoint is just too buggy and started crashing on me the night before my last test. For school I play the lecture with quicktime while I type notes in Keynote. I will push F8 to play/pause the lecture to take notes. However, F8 also puts Keynote in presentation mode. Can I stop this?
Thanks,
Borden

"3.) And lastly one can make one's own playlists. This can be quite entertaining and satisfying."
Ok Thanx
Well yes I can make as many playlists as I need. But as you probably know, the creation of the play list doesn't eliminate iTunes from playing every tune in the library list, when you open another sound file from somewhere else on your hard drive, unless you manually stop it from doing so.
Sorry - I'm just used to using an independant player which only opens the file and doesn't open an entire application and it's library.
Thanx

Similar Messages

How do I stop Firefox from playing video after I navigate from the page or leave Firefox?

Simple and annoying. . Extremely frustrating issue with Firefox for Android. ..
I watch a YouTube video or any flash video. . And after I hit play, the ONLY way to stop it is to hit pause or let it play to the end or close the tab. .
It will NOT automatically stop if I open another tab. or if I navigate from Firefox. .
I feel this is a very basic feature. Did I set something up that was wrong?
Can I ask two questions?
I have another extremely annoying and frustrating problem with Firefox for Android.
The "top" (if you pull down the tabs) search bar DOES NOT allow my stock Samsung keyboard to auto space. . Thus instead of typing
"How do I stop Firefox from playing video after I navigate from the page or leave Firefox?"
I'll type in
"HowdoIstopFirefoxfromplayingvideoafterInavigatefromthepageorleaveFirefox?"
Unless I manually got the space bar.
Using a recently factory data reset Samsung Galaxy s4 active.. android 4.2.2 and stock Samsung keyboard ... Firefox 34.0.1
Thanks in advanced.
Ps
I was a hardcore xscope user for years and just recently gave in to Firefox when i lost all my bookmarks due to a forced factory data reset. .

I'm using a different keyboard which works fine in the most top search bar...
I cannot believe that it's not a feature.
What if I was watching a video and wanted to shut it off quickly? I'll have to hit back? Wait for the previous screen to load then hit the power button?
Please tell me that feature ids soon to come

How do I stop sound from playing when I leave frame?

I have designed a website for an advertising agency using
Flash and ActionScript 3. In the portfolio page, I have several TV
commercials that are available to play. What I need is 1) when the
user leaves the TV ad page, I want the tv commercial to quit
playing (right now, it continues even though the user has moved on
to other pages). and 2) If the user selects a different TV
commercial without first stopping the original one, the sound for
both of the them plays at the same time. I am using the flv
playback component. The video appears to stop, but the sound
doesn't. My TV commercials are external flv files.
I have also made a page for radio ads and I just used play,
pause and stop buttons to control the sound. This page does the
same thing. The sound continues when you move on to another page in
the site. My sound files are also all external sound files.
All of my pages are just individual frames in a main
timeline. Each page has a frame label.
If this is not clear, here is the link to my site:
http://www.hammockads.com
I would appreciate any help anyone can give me with this. I
have tried for weeks now, to solve this problem and I just don't
know enough actionscript or flash to figure it out. I've only been
working with this for a few months.

I have my website set up so that the portfolio page occupies
one frame of my timeline. Inside that frame, I have a movie clip
which contains the additional pages of the portfolio section. The
additional pages show examples of the print ads, radio ads, tv ads,
web sites that my client has created. Each of these additional
pages is also one frame of the timeline (this time inside the
portfolio movie clip). When the user clicks a link in the website,
it just takes them to another frame on my timeline.
The entire website is one swf file and each of the pages is
located on one frame of the timeline (either on the main timeline
or inside a movie clip timeline.)
In the tv ads page, I have a button for each of the tv
commercials. When the user selects a specific commercial, then the
actionscript calls that particular ad from an external flv file.
The problem is that when the user clicks another button (to view
another ad or chooses to go to another page in the website (which
involves leaving the current frame in the timeline) the video or
radio ad doesn't automatically stop playing.
I can't really post code, because I'm not sure what code to
post. The TV ads are currently set up using the FLV playback
feature. The radio ads are set up with play, stop, pause and volume
control buttons. When a user here selects a new radio ad, the one
currently playing stops and the new one starts, but when the user
chooses to go to another page without first stopping the ad from
playing, it continues to play.
On the TV ads page, nothing is really working except that the
ad plays and stops when it comes to the end. I'm thinking that I
may need to go back and re-code the TV ads to play without using
the flv playback option.
Any thoughts? I hope this is a little bit clearer.

Stop music from playing

How do I prevent the music app from playing every time I end a call using my Bluetooth device or headset? It is very annoying when at work and a call ends my music automatically starts to play through the head set or my Bluetooth.

Sorry but this solution is **bleep**. This is a but that needs to be fixed. FYI, the problem show up if you end a call from the headset or from the screen.
Also, the Droid seems to issue stop commands for Music and other apps such as Google Listen. It's another bug that is likely related to the same issue.
Google needs to get off their {word filter avoidance}
and fix the problem. Verizon needs to stop giving out {please keep your posts courteous} solutions and start pressing Google to fix the problem.
Kimberly_Nicole wrote:
Hi I understand you are having issues with your music application and I can certainly look into this for you. Are you referring to the default music application or did you download another application via the app market?
What you can do is stop the music application completely when you are not using it. You can do this by going to Menu-Settings-Applications-Manage Applications-Running and then click on the "music" application to force stop it.
Please let me know if this works or if you are using a different application.
Thanks!

Stop podcast from playing the next one ??

Hi guys,
How can I stop the iphone from playing the next podcast? I subscribe to a podcast and have about 20 shows that I have to listen to, but after it finish playing one, it goes to the next one and I dont want that. How could I tell the iphone to stop after finishing one podcast ?

Un-sync all your music to remove it from the device, then restart (hold down the home button along with the sleep/wake button until you see the apple, then let go). Now re-sync your music.

Stop song from playing

My question is, how do i stop a song from playing without turning it off? I know how to pause, skip back/forward, but is there a way to stop a playing song altogether? Thanks for your help.

The pause button stops a song playing, there's no need for an extra button for stop. You pause the song and move to another and press play or pause it and after a period of time the iPod will close down on it's own.

Stop music from playing automatically

I have some music files on my website (at http://www.opusonejazz.com/Opus%20One%20Vocal%20Jazz%20Ensemble/Music%20Samples. html), which apparently from a report I have gotten play automatically on some peoples computers (i don't know their system specs). I don't have the files set to play automatically-I checked the Javascript file.
How can I prevent the clips from playing automatically, no matter what a user's settings are?
Thanks!

Your music file are set to not autoplay and your images used in your page are nearly as large in file size as them.
http://www.opusonejazz.com/Opus%20One%20Vocal%20Jazz%20Ensemble/Images/Opus%20On e%27s%20First%20Photo.JPG
Over 1.5 MB's when it should be 20 KB's. Use something to reduce that file size and don't place so many files on the same page.

How to stop video from playing?

Hi,
i have a problem that i've already see that is pretty usual, the videoplayer that i have works fine but when i click in a button to go to another page the videoplayer doesn't stop,the audio continues playing even when i'm not on the videoplayer page.
I've already found some solutions in the web but none of them worked,probably because i didn't put them in the right place
The code is a little long:
// ############# CONSTANTS
// time to buffer for the video in sec.
const BUFFER_TIME:Number = 8;
// start volume when initializing player
const DEFAULT_VOLUME:Number = 0.6;
// update delay in milliseconds.
const DISPLAY_TIMER_UPDATE_DELAY:int = 10;
// smoothing for video. may slow down old computers
const SMOOTHING:Boolean = true;
// ############# VARIABLES
// flag for knowing if user hovers over description label
var bolDescriptionHover:Boolean = false;
// flag for knowing in which direction the description label is currently moving
var bolDescriptionHoverForward:Boolean = true;
// flag for knowing if flv has been loaded
var bolLoaded:Boolean = false;
// flag for volume scrubbing
var bolVolumeScrub:Boolean = false;
// flag for progress scrubbing
var bolProgressScrub:Boolean = false;
// holds the number of the active video
var intActiveVid:int;
// holds the last used volume, but never 0
var intLastVolume:Number = DEFAULT_VOLUME;
// net connection object for net stream
var ncConnection:NetConnection;
// net stream object
var nsStream:NetStream;
// object holds all meta data
var objInfo:Object;
// shared object holding the player settings (currently only the volume)
var shoVideoPlayerSettings:SharedObject = SharedObject.getLocal("playerSettings");
// url to flv file
var strSource:String = root.loaderInfo.parameters.playlist == null ? "playlist.xml" : root.loaderInfo.parameters.playlist;
// timer for updating player (progress, volume...)
var tmrDisplay:Timer;
// loads the xml file
var urlLoader:URLLoader;
// holds the request for the loader
var urlRequest:URLRequest;
// playlist xml
var xmlPlaylist:XML;
// ############# STAGE SETTINGS
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.align = StageAlign.TOP_LEFT;
// ############# FUNCTIONS
// sets up the player
function initVideoPlayer():void {
 // hide video controls on initialisation
 mcVideoControls.visible = false;
 // hide buttons
 mcVideoControls.btnUnmute.visible = false;
 mcVideoControls.btnPause.visible = false;
 mcVideoControls.btnFullscreenOff.visible = false;
 // set the progress/preload fill width to 1
 mcVideoControls.mcProgressFill.mcFillRed.width = 1;
 mcVideoControls.mcProgressFill.mcFillGrey.width = 1;
 // set time and duration label
 mcVideoControls.lblTimeDuration.htmlText = "00:00 / 00:00";
 // add global event listener when mouse is released
 stage.addEventListener(MouseEvent.MOUSE_UP, mouseReleased);
 // add fullscreen listener
 stage.addEventListener(FullScreenEvent.FULL_SCREEN, onFullscreen);
 // add event listeners to all buttons
 mcVideoControls.btnPause.addEventListener(MouseEvent.CLICK, pauseClicked);
 mcVideoControls.btnPlay.addEventListener(MouseEvent.CLICK, playClicked);
 mcVideoControls.btnStop.addEventListener(MouseEvent.CLICK, stopClicked);
 mcVideoControls.btnNext.addEventListener(MouseEvent.CLICK, playNext);
 mcVideoControls.btnPrevious.addEventListener(MouseEvent.CLICK, playPrevious);
 mcVideoControls.btnMute.addEventListener(MouseEvent.CLICK, muteClicked);
 mcVideoControls.btnUnmute.addEventListener(MouseEvent.CLICK, unmuteClicked);
 mcVideoControls.btnFullscreenOn.addEventListener(MouseEvent.CLICK, fullscreenOnClicked);
 mcVideoControls.btnFullscreenOff.addEventListener(MouseEvent.CLICK, fullscreenOffClicked);
 mcVideoControls.btnVolumeBar.addEventListener(MouseEvent.MOUSE_DOWN, volumeScrubberClicked);
 mcVideoControls.mcVolumeScrubber.btnVolumeScrubber.addEventListener(MouseEvent.MOUSE_DOWN , volumeScrubberClicked);
 mcVideoControls.btnProgressBar.addEventListener(MouseEvent.MOUSE_DOWN, progressScrubberClicked);
 mcVideoControls.mcProgressScrubber.btnProgressScrubber.addEventListener(MouseEvent.MOUSE_ DOWN, progressScrubberClicked);
 mcVideoControls.mcVideoDescription.btnDescription.addEventListener(MouseEvent.MOUSE_OVER, startDescriptionScroll);
 mcVideoControls.mcVideoDescription.btnDescription.addEventListener(MouseEvent.MOUSE_OUT, stopDescriptionScroll);
 // create timer for updating all visual parts of player and add
 // event listener
 tmrDisplay = new Timer(DISPLAY_TIMER_UPDATE_DELAY);
 tmrDisplay.addEventListener(TimerEvent.TIMER, updateDisplay);
 // create a new net connection, add event listener and connect
 // to null because we don't have a media server
 ncConnection = new NetConnection();
 ncConnection.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
 ncConnection.connect(null);
 // create a new netstream with the net connection, add event
 // listener, set client to this for handling meta data and
 // set the buffer time to the value from the constant
 nsStream = new NetStream(ncConnection);
 nsStream.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
 nsStream.client = this;
 nsStream.bufferTime = BUFFER_TIME;
 // attach net stream to video object on the stage
 vidDisplay.attachNetStream(nsStream);
 // set the smoothing value from the constant
 vidDisplay.smoothing = SMOOTHING;
 // set default volume and get volume from shared object if available
 var tmpVolume:Number = DEFAULT_VOLUME;
 if(shoVideoPlayerSettings.data.playerVolume != undefined) {
 tmpVolume = shoVideoPlayerSettings.data.playerVolume;
 intLastVolume = tmpVolume;
 // update volume bar and set volume
 mcVideoControls.mcVolumeScrubber.x = (53 * tmpVolume) + 318;
 mcVideoControls.mcVolumeFill.mcFillRed.width = mcVideoControls.mcVolumeScrubber.x - 371 + 53;
 setVolume(tmpVolume);
 // create new request for loading the playlist xml, add an event listener
 // and load it
 urlRequest = new URLRequest(strSource);
 urlLoader = new URLLoader();
 urlLoader.addEventListener(Event.COMPLETE, playlistLoaded);
 urlLoader.load(urlRequest);
function playClicked(e:MouseEvent):void {
 // check's, if the flv has already begun
 // to download. if so, resume playback, else
 // load the file
 if(!bolLoaded) {
 nsStream.play(strSource);
 bolLoaded = true;
 else{
 nsStream.resume();
 vidDisplay.visible = true;
 // switch play/pause visibility
 mcVideoControls.btnPause.visible = true;
 mcVideoControls.btnPlay.visible = false;
function pauseClicked(e:MouseEvent):void {
 // pause video
 nsStream.pause();
 // switch play/pause visibility
 mcVideoControls.btnPause.visible = false;
 mcVideoControls.btnPlay.visible = true;
function stopClicked(e:MouseEvent):void {
 // calls stop function
 stopVideoPlayer();
function muteClicked(e:MouseEvent):void {
 // set volume to 0
 setVolume(0);
 // update scrubber and fill position/width
 mcVideoControls.mcVolumeScrubber.x = 318;
 mcVideoControls.mcVolumeFill.mcFillRed.width = 1;
function unmuteClicked(e:MouseEvent):void {
 // set volume to last used value or DEFAULT_VOLUME if last volume is zero
 var tmpVolume:Number = intLastVolume == 0 ? DEFAULT_VOLUME : intLastVolume
 setVolume(tmpVolume);
 // update scrubber and fill position/width
 mcVideoControls.mcVolumeScrubber.x = (53 * tmpVolume) + 318;
 mcVideoControls.mcVolumeFill.mcFillRed.width = mcVideoControls.mcVolumeScrubber.x - 371 + 53;
function volumeScrubberClicked(e:MouseEvent):void {
 // set volume scrub flag to true
 bolVolumeScrub = true;
 // start drag
 mcVideoControls.mcVolumeScrubber.startDrag(true, new Rectangle(318, 19, 53, 0)); // NOW TRUE
function progressScrubberClicked(e:MouseEvent):void {
 // set progress scrub flag to true
 bolProgressScrub = true;
 // start drag
 mcVideoControls.mcProgressScrubber.startDrag(true, new Rectangle(0, 2, 432, 0)); // NOW TRUE
function mouseReleased(e:MouseEvent):void {
 // set progress/volume scrub to false
 bolVolumeScrub = false;
 bolProgressScrub = false;
 // stop all dragging actions
 mcVideoControls.mcProgressScrubber.stopDrag();
 mcVideoControls.mcVolumeScrubber.stopDrag();
 // update progress/volume fill
 mcVideoControls.mcProgressFill.mcFillRed.width = mcVideoControls.mcProgressScrubber.x + 5;
 mcVideoControls.mcVolumeFill.mcFillRed.width = mcVideoControls.mcVolumeScrubber.x - 371 + 53;
 // save the volume if it's greater than zero
 if((mcVideoControls.mcVolumeScrubber.x - 318) / 53 > 0)
 intLastVolume = (mcVideoControls.mcVolumeScrubber.x - 318) / 53;
function updateDisplay(e:TimerEvent):void {
 // checks, if user is scrubbing. if so, seek in the video
 // if not, just update the position of the scrubber according
 // to the current time
 if(bolProgressScrub)
 nsStream.seek(Math.round(mcVideoControls.mcProgressScrubber.x * objInfo.duration / 432))
 else
 mcVideoControls.mcProgressScrubber.x = nsStream.time * 432 / objInfo.duration;
 // set time and duration label
 mcVideoControls.lblTimeDuration.htmlText = "" + formatTime(nsStream.time) + " / " + formatTime(objInfo.duration);
 // update the width from the progress bar. the grey one displays
 // the loading progress
 mcVideoControls.mcProgressFill.mcFillRed.width = mcVideoControls.mcProgressScrubber.x + 5;
 mcVideoControls.mcProgressFill.mcFillGrey.width = nsStream.bytesLoaded * 438 / nsStream.bytesTotal;
 // update volume and the red fill width when user is scrubbing
 if(bolVolumeScrub) {
 setVolume((mcVideoControls.mcVolumeScrubber.x - 318) / 53);
 mcVideoControls.mcVolumeFill.mcFillRed.width = mcVideoControls.mcVolumeScrubber.x - 371 + 53;
 // chech if user is currently hovering over description label
 if(bolDescriptionHover) {
 // check in which direction we're currently moving
 if(bolDescriptionHoverForward) {
 // move to the left and check if we've shown everthing
 mcVideoControls.mcVideoDescription.lblDescription.x -= 0.1;
 if(mcVideoControls.mcVideoDescription.lblDescription.textWidth - 133 <= Math.abs(mcVideoControls.mcVideoDescription.lblDescription.x))
 bolDescriptionHoverForward = false;
 } else {
 // move to the right and check if we're back to normal
 mcVideoControls.mcVideoDescription.lblDescription.x += 0.1;
 if(mcVideoControls.mcVideoDescription.lblDescription.x >= 0)
 bolDescriptionHoverForward = true;
 } else {
 // reset label position and direction variable
 mcVideoControls.mcVideoDescription.lblDescription.x = 0;
 bolDescriptionHoverForward = true;
function onMetaData(info:Object):void {
 // stores meta data in a object
 objInfo = info;
 // now we can start the timer because
 // we have all the neccesary data
 if(!tmrDisplay.running)
 tmrDisplay.start();
function netStatusHandler(event:NetStatusEvent):void {
 // handles net status events
 switch (event.info.code) {
 // trace a messeage when the stream is not found
 case "NetStream.Play.StreamNotFound":
 trace("Stream not found: " + strSource);
 break;
 // when the video reaches its end, we check if there are
 // more video left or stop the player
 case "NetStream.Play.Stop":
 if(intActiveVid + 1 < xmlPlaylist..vid.length())
 playNext();
 else
 stopVideoPlayer();
 break;
function stopVideoPlayer():void {
 // pause netstream, set time position to zero
 nsStream.pause();
 nsStream.seek(0);
 // in order to clear the display, we need to
 // set the visibility to false since the clear
 // function has a bug
 vidDisplay.visible = false;
 // switch play/pause button visibility
 mcVideoControls.btnPause.visible = false;
 mcVideoControls.btnPlay.visible = true;
function setVolume(intVolume:Number = 0):void {
 // create soundtransform object with the volume from
 // the parameter
 var sndTransform = new SoundTransform(intVolume);
 // assign object to netstream sound transform object
 nsStream.soundTransform = sndTransform;
 // hides/shows mute and unmute button according to the
 // volume
 if(intVolume > 0) {
 mcVideoControls.btnMute.visible = true;
 mcVideoControls.btnUnmute.visible = false;
 } else {
 mcVideoControls.btnMute.visible = false;
 mcVideoControls.btnUnmute.visible = true;
 // store the volume in the flash cookie
 shoVideoPlayerSettings.data.playerVolume = intVolume;
 shoVideoPlayerSettings.flush();
function formatTime(t:int):String {
 // returns the minutes and seconds with leading zeros
 // for example: 70 returns 01:10
 var s:int = Math.round(t);
 var m:int = 0;
 if (s > 0) {
 while (s > 59) {
 m++; s -= 60;
 return String((m < 10 ? "0" : "") + m + ":" + (s < 10 ? "0" : "") + s);
 } else {
 return "00:00";
function fullscreenOnClicked(e:MouseEvent):void {
 // go to fullscreen mode
 stage.displayState = StageDisplayState.FULL_SCREEN;
function fullscreenOffClicked(e:MouseEvent):void {
 // go to back to normal mode
 stage.displayState = StageDisplayState.NORMAL;
function onFullscreen(e:FullScreenEvent):void {
 // check if we're entering or leaving fullscreen mode
 if (e.fullScreen) {
 // switch fullscreen buttons
 mcVideoControls.btnFullscreenOn.visible = false;
 mcVideoControls.btnFullscreenOff.visible = true;
 // bottom center align controls
 mcVideoControls.x = (Capabilities.screenResolutionX - 440) / 2;
 mcVideoControls.y = (Capabilities.screenResolutionY - 33);
 // size up video display
 vidDisplay.height = (Capabilities.screenResolutionY - 33);
 vidDisplay.width = vidDisplay.height * 4 / 3;
 vidDisplay.x = (Capabilities.screenResolutionX - vidDisplay.width) / 2;
 } else {
 // switch fullscreen buttons
 mcVideoControls.btnFullscreenOn.visible = true;
 mcVideoControls.btnFullscreenOff.visible = false;
 // reset controls position
 mcVideoControls.x = 0;
 mcVideoControls.y = 330;
 // reset video display
 vidDisplay.y = 0;
 vidDisplay.x = 0;
 vidDisplay.width = 440;
 vidDisplay.height = 241;
function playlistLoaded(e:Event):void {
 // create new xml with loaded data from loader
 xmlPlaylist = new XML(urlLoader.data);
 // set source of the first video but don't play it
 playVid(0, true)
 // show controls
 mcVideoControls.visible = true;
function playVid(intVid:int = 0, bolPlay = true):void {
 if(bolPlay) {
 // stop timer
 tmrDisplay.stop();
 // play requested video
 nsStream.play(String(xmlPlaylist..vid[intVid].@src));
 // switch button visibility
 mcVideoControls.btnPause.visible = true;
 mcVideoControls.btnPlay.visible = false;
 } else {
 strSource = xmlPlaylist..vid[intVid].@src;
 // show video display
 vidDisplay.visible = true;
 // reset description label position and assign new description
 mcVideoControls.mcVideoDescription.lblDescription.x = 0;
 mcVideoControls.mcVideoDescription.lblDescription.htmlText = (intVid + 1) + ". " + String(xmlPlaylist..vid[intVid].@desc) + "";
 // update active video number
 intActiveVid = intVid;
function playNext(e:MouseEvent = null):void {
 // check if there are video left to play and play them
 if(intActiveVid + 1 < xmlPlaylist..vid.length())
 playVid(intActiveVid + 1);
function playPrevious(e:MouseEvent = null):void {
 // check if we're not and the beginning of the playlist and go back
 if(intActiveVid - 1 >= 0)
 playVid(intActiveVid - 1);
function startDescriptionScroll(e:MouseEvent):void {
 // check if description label is too long and we need to enable scrolling
 if(mcVideoControls.mcVideoDescription.lblDescription.textWidth > 138)
 bolDescriptionHover = true;
function stopDescriptionScroll(e:MouseEvent):void {
 // disable scrolling
 bolDescriptionHover = false;
// ############# INIT PLAYER
initVideoPlayer();

No,im not using flvplayback component (i think).
Heres the video player that i'm using:
http://www.thetechlabs.com/tutorials/xml/expanding-the-as3-videoplayer/

Can't stop audio from playing back on my MacBook Pro

First, Im new to Mac, Ive only been using it for a month, but loving it so far. =) I'm trying to record vocals in Logic Pro 9. My set up right now is MXL 990 plugged into a Phonic Firefly 302 USB interface and that is plugged into my MacPro. Now my problem isnt really with recording, I can record vocals fine. My probem is I want to hear my vocals with all the effects and plugins on when I record. But my mac wont stop playing back my dry vocals through my computer. I dont want to monitor vocals through my mac, only through logic. So i tried to go into Audio MIDI Setup and mute the playback but when I do that I cant record them in logic anymore. Its really annoying everytime I try to record hearing a version of my vocals with effects and hearing another version dry all at the same time, and they arent even in the exact same time, so you get a little slap back echo super annoying. My Audio MIDI Setup is set to "Built in Output - use this device for sound output. Phonic Firefly USB - Use this devise for sound input. I have tried setting that to the output also but it didnt do anything, still had the echo.

Thank you for your replay
It was working on my Mac before installing the new update of Mac software. then its corrupted
from where I can ask for refund? as I bought from App Store ?
regards

Stopping Audio from Playing

I am using frames in my timeline to represent different pages
for a
website.
Example:
Frame 1-30 is the home page tweening in with navigation
linking to other
frames, and there is a stop action on frame 30, so the
timeline does not
continue to play beyond there until the user clicks a button.
On frame 15 I dragged music to the stage that plays while the
home page
is fading in, and continues to play once it stops on frame
30.
If the user selects a button and goes to a different page
before the
song finishes, it still continues playing the music on the
later frame.
1.) How do I set it up so that as soon as the user selects a
button to
go to a different frame, the song stops playing?
Thanks!

I am using AS3.
If I place my audio into a MC and then place the MC into my
main
Timeline, how would I then get it to do what I need?
Thanks!!!!!
funkysoul wrote:
> if you using AS2, you can stop the sound using:
> stopAllSounds();
>
> Normally you shouldn't insert the sound into the
timeline, rather a better
> usage is to load it from the library and place it in a
movieclip which you can
> control more accurately.
>

How do I stop movie from playing when I leave frame?

Hi,
I have designed a website using Flash and ActionScript 3. In
the portfolio page, I have TV commercial that are available to
play. What I need is 1) when the user leaves the TV ad page, I want
the tv commercial to quit playing (right now, it continues even
though the user has moved on to other pages). I am using the flv
playback component. My TV commercial are external flv file.
All of my pages are just individual frames in a main
timeline. Each page has a frame label.
I would appreciate any help anyone can give me with this. I
have tried for weeks now, to solve this problem and I just don't
know enough actionscript or flash to figure it out.
Thanks in Advance

Give your FLVPlayback component an instance name and then,
possibly from the navigation element that moves the user from that
frame, tell that component instance to stop();
Without a more complete description of your movie's structure
its difficult to tell where, or in how many places, you should
issue the stop() command.

Stop iradio from playing blocked songs?

I tried blocking songs and artist for a station I made but iradio keeps playing the songs. I look in the blocked list and the artist disappear everytime I keep adding them. What's up with that?

If iTunes is paused, it shouldn't interfere with sleep — at least, my computer goes to sleep just fine while iTunes is paused. But you can go from "pause" to "stop" by selecting another playlist.
You can't change the gap between tracks while they're playing in iTunes — Gapless Playback is always on, unless Crossfade Playback is turned on (which will not introduce a gap between tracks).

How can I stop videos from playing in a slideshow?

I only want to see a slideshow of the photos in an event but iPhoto 09 is showing all the videos as well. Is there a way for me to stop this without having to remove all the videos from every event?

To add some to Terence's suggestion you can create a Smart album with the criteria:
1 - Album is "then album you want to use"
2 - File name does not contain ".mov". OR File Name ends with .jpg.
This will give you a smart album that will only contain your image files. You can change the album to any other album you want to view as a slideshow.

How do I stop podcasts from playing automatically on my Apple TV instead of my computer?

When I try to watch a video podcast on my computer, it will automatically connect to my Apple TV via AirPlay and try to play it there (even though I have just double-clicked it on my computer). But sometimes I just want to play it on my computer, not on the Apple TV. Once it does go to Apple TV, then I have to go to the bottom of the computer screen and switch from Apple TV to computer. But I would prefer not to have to do this, since the process needlessly turns on my Apple TV every time (and sometimes my Apple TV doesn't work properly, meaning that if the connection can't get established, I can't watch the podcast at all because it won't just let me play on my computer from the beginning). How do I prevent it from automatically going to the Apple TV every time, and just get it to play on my computer? I feel like I've looked at every setting. Thanks

''user293 [[#answer-719707|said]]''
<blockquote>
Is there something in particular you don't like in the newer versions? Also, you can give feedback about firefox at [https://input.mozilla.org/en-US/feedback/firefox? input.mozilla.org].
'''Turning off updates for firefox isn't a good idea''', as each release contains security fixes that are disclosed to the public. However, you can if you want to. Go to the firefox preferences (type about:preferences in the url bar), choose the "advanced" tab, and then choose "update". You can then select "never check for updates".
</blockquote>
I don't want to turn off updates. I want hotshot programmers to N-O-T configure Firefox to CHANGE what I have set up on my computer. I want them to N-O-T remove stuff from Firefox that I use every day. I can't even remember what they called that list of options in the upper left of the screen, but I used it regularly. Now it is ripped out. $&^*&&^%$#@
I guarantee you, if somebody had sat down at MY computer and removed those features, I would have beat him bloody. WHY DO SOME HOTSHOTS SOMEWHERE THINK THEY KNOW BETTER THEN i DO WHAT i NEED??????
DON'T force me to use my computer as you use yours. Give me the OPTIONS to choose. Options. Not YOUR WAY - options.
Like I said, it looks to me like you're trying to impress hot shots some where. Don't destroy perfectly good applications in the process. Give S-O-M-E thought to what non-geeks NEED.
AND when pseudo answering complaints, give us the chance to talk to somebody, not que up on a yet another pick list of off subject nonsense.

How to stop sound from playing everytime we go to 1st frame ?*

Hi everyone, my app has 3 frames and a sound playing on background so everytime i go to 1st frame the music play's over himself,
is easy to get 5 instances of the music playing at same time.
How to stop this behavior ?
Music file imported to library.
Sound Linkage: export for actionScript
Sound Linkage: export in frame 1
Any help are welcome
Flash CS6 - AIR 3.4 Android and iOS > CODE:
//sound
var bgSound:BGLoop = new BGLoop();
var channel:SoundChannel=new SoundChannel();
playMusic();
//making mute;
soundBtn.addEventListener(MouseEvent.MOUSE_UP , mute);
function mute(event:MouseEvent) {
    //removing mute function then adding unmute function to same button
    soundBtn.removeEventListener(MouseEvent.MOUSE_UP , mute);
    soundBtn.addEventListener(MouseEvent.MOUSE_UP , unMute);
    //making symbol to visible;
    soundBtn.gotoAndStop(2);
    //set the volume false;
    SoundMixer.soundTransform = new SoundTransform(0);
//making unmute
function unMute(event:MouseEvent) {
    soundBtn.removeEventListener(MouseEvent.MOUSE_UP , unMute);
    soundBtn.addEventListener(MouseEvent.MOUSE_UP , mute);
    soundBtn.gotoAndStop(1);
    //set the volume true;
    SoundMixer.soundTransform = new SoundTransform(1);
function playMusic():void {
    channel = bgSound.play();
    channel.addEventListener(Event.SOUND_COMPLETE, loopMusic);
function loopMusic(e:Event):void {
    if (channel != null) {
        channel.removeEventListener(Event.SOUND_COMPLETE, loopMusic);
        playMusic();

Another way to do this is to create a boolean right off the start. Lets say var createMusicTrack:Boolean and set it to true
Then load your music and start playing it and at the end of that load code add a line that sets the boolean to false so that when you come back to frame 1 the boolean will be false and the code will not load and play, but this could be problematic too. Djnr suggestion is better for your purposes.

Stop F8 from playing presentation?

Similar Messages

Maybe you are looking for