Stop new connections to an instance

I have a 10.2.0.3 production RHEL4 Linux 64-bit RAC cluster of two nodes. I need to perform some OS maintenance on node1 in the near future, but not on node2 just yet. I would like to stop all new database connections from being sent to node1.
Since this is 10.2.0.3, I know I can just stop the nodeapps on this node and this will prevent any new connections to it. Is there a better way to do this though? I don't see anything wrong with this approach, but I just wanted to see if there is an easier/better way. I'm sure I could also just stop the listener for this node also with the same results. Any thoughts if this has any advantages over stopping the whole nodeapps? Are there any additional ways to accomplish what I want? Thanks.

a: stop the service on that node is the recommended and best way.
or even alter system enable restricted.

Similar Messages

ORA-12528: TNS:listener: all appropriate instances are blocking new connect

Dear All,
I got the following error when use 'STARTUP MOUNT;' in sqlplus
Error
ORA-12528: TNS:listener: all appropriate instances are blocking new connections
I am using Oracle 10 Database and Window XP Operating System
How to solve it.
Please help me
Thanks and Regards,
Fazil
Edited by: user11334489 on Sep 11, 2012 12:41 AM

Wrong forum. Please post your question in the General Database Discussions forum.
Craig...

RMAN: -TNS:listener: all appropriate instances are blocking new connections

Hi all,
we are trying the some rman recoveries on test machine when we are trying to restore the conrolfile thru rman
what they have mentioned in docs id shutdown abort of the target database and then startup no mount thru rman then restore controlfile and open the database.
Now what i want to know is after shutdown i can t able to connect thru rman target since it is showing
TNS:listener: all appropriate instances are blocking new connections
how can i connect when thru rman in this stage when the database is down when i m trying to startup command thru RMAN prompt also it throw me the same error. for this i cant move further can pls anybody help this..
Thanks
M.Murali..

D:\>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 20-MAY-2009 16:17:58
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Services Summary...
Service "BKPRMANXDB" has 1 instance(s).
Instance "bkprman", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: INP1MFDDB, pid: 936>
(ADDRESS=(PROTOCOL=tcp)(HOST=INP1MFDDB)(PORT=1826))
Service "BKPRMAN_XPT" has 1 instance(s).
Instance "bkprman", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:90 refused:0 state:ready
LOCAL SERVER
Service "MFUNDXDB" has 1 instance(s).
Instance "mfund", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: INP1MFDDB, pid: 1876>
(ADDRESS=(PROTOCOL=tcp)(HOST=INP1MFDDB)(PORT=1054))
Service "MFUND_XPT" has 1 instance(s).
Instance "mfund", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:25 refused:0 state:ready
LOCAL SERVER
Service "bkprman" has 1 instance(s).
Instance "bkprman", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:90 refused:0 state:ready
LOCAL SERVER
Service "mfund" has 1 instance(s).
Instance "mfund", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:25 refused:0 state:ready
LOCAL SERVER
The command completed successfully
Edited by: Balamurali on May 20, 2009 4:33 PM

New connections stop working after 31 hours of computer uptime.

I have been using a pppoe connection since I installed archlinux in 2006. This works very well. a network cable is connected to my computer and I use it to dial a pppoe connection. I never had any problems with it.
But a while ago, I thought I would share this connection with my phone so I got a router out of the closet. the ISP's cable is connected to the router now. then my computer is connected to the router with a cable and gets a connection through the router's DHCP server. the phone establishes a wireless connection to the phone.
the lease time is 9 hours.
Now after exactly 31 hours, current connections on computer continue to work (existing downloads) but the computer stops doing new connections. so I cannot browse the internet.
/etc/rc.d/network restart doesn't help
restarting the router doesn't help.
only a computer restart does. how can I troubleshoot the problem?
if I connect the cable directly to my network card at this stage, I can dial the pppoe connection and use internet. it's only connections router through 192.168.1.1 that stop working.
PS. I don't have a windows installation so I have no idea where the problem lies.
Last edited by hussam (2012-06-27 05:04:03)

http://stackoverflow.com/questions/6799 … tain-sites some guy on archlinux has a similar problem.
here's a wireshark log from two occasions. http://hussam.eu.org/capture.zip http://hussam.eu.org/capture2.zip
some notes:
1. rmmoding the network card driver and modprobing it again doesn't help
2. I hibernated for 10 minutes and I was able to extend it by 10 minutes. I actually did try this once before too. I hibernated for an hour and I was able to extend it to 32 hours (31 awake time + one hour hibernation).
3. http://192.168.1.1 will still open.
4. I have to do traceroute -I or -T. router seems to block traceroute without arguments or traceroute -U.

Ora-12528 all appropriate instances are blocking new connections

hi,
i get an error 'ora-12528 all appropriate instances are blocking new connections'
i have changed shared_servers parameters. from there itself i get the error

With zero substantive information about your environment, it is impossible to know for sure.
But, if you've just set SHARED_SERVERS=0, for example, and your tnsnames.ora has a line in it that says (SERVER=SHARED), then your client is demanding the use of shared servers which don't exist. You can therefore expect the sort of error you're getting.
The fix is to remove the explicit demand for shared servers in the tnsnames.ora. Just remove the line (or, not quite such good practice, set it to DEDICATED).

TNS: listener: all appropriate instances are blocking new connections.

Hello,
when I start up my freshly installed developerday VB appliance, and try to connect to the database, following the tutorial in "Hands-on lab" - "SQL developer", as well as with any other attempt, the connection would not establish. I always get a message ORA-12528: TNS: listener: all appropriate instances are blocking new connections.
I cannot find any Readme or Tutorial which explains this appearance.
Weird, that obviously nobody else runs into this problem, otherwise this forum would be full of it. But isn't the VB appliance byte-for-byte the same for anybody?
Any ideas?
Edited by: pestw2000 on 23.12.2010 01:06

Hi Marco, thanks for replying. You can read the OS version from the lsnctl output. The OS of the host system of the Virtual Box is Windows7 64-bit. Hmm... "HOST=0.0.0.0" looks suspicious, doesn't it?
Wolfgang
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date                24-DEC-2010 01:31:40
Uptime                    0 days 0 hr. 1 min. 45 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /home/oracle/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File         /home/oracle/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
+(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=0.0.0.0)(PORT=1521)))+
+(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=0.0.0.0)(PORT=80))(PROTOCOL_STACK=(PRESENTATION=HTTP)(SESSION=RAW)))+
+(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=0.0.0.0)(PORT=21))(PROTOCOL_STACK=(PRESENTATION=FTP)(SESSION=RAW)))+
Services Summary...
Service "orcl" has 1 instance(s).
Instance "orcl", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully

ORA-12528: TNS:listener: all approriate instances are blocking new connecti

HI all ,
i am getting this error while log on on database 10g on operating system is WINDOW XP
ORA-12528: TNS:listener: all approriate instances are blocking new connection
Please GUide me how to resolve this issue
Thanks And regards
Vikas Singhal

vikas singhal wrote:
HOw to find listener to see if the service is in BLOCKED state:
Thanks And Regards
Vikas SinghalYou can use lsnrctl services as
C:\Documents and Settings\chinar>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.2.0 - Production on 13-JUL-2010 14:30
:26
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=chinar.bank.local)(PORT=
1521)))
Services Summary...
Service "+ASM_XPT" has 1 instance(s).
Instance "+asm", status BLOCKED, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "+asm" has 1 instance(s).
Instance "+asm", status BLOCKED, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "TEST" has 2 instance(s).
Instance "TEST", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:387 refused:0
         LOCAL SERVER
Instance "test", status RESTRICTED, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "TESTXDB" has 1 instance(s).
Instance "test", status RESTRICTED, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1002 state:ready
         DISPATCHER <machine: CHINAR, pid: 7472>
         (ADDRESS=(PROTOCOL=tcp)(HOST=chinar.bank.local)(PORT=4790))
Service "TEST_XPT" has 1 instance(s).
Instance "test", status RESTRICTED, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "chinar.bank.local" has 1 instance(s).
Instance "SB", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
The command completed successfully
C:\Documents and Settings\chinar>

ORA-12528: TNS:listener: all appropriate instances are blocking new connections

I'm working with OBIEE 11.1.1.5, with Ora DB 11.2.
Suddenly, the OBIEE is not accessible.
The logs showed that the issue is DB connectivity.
When I try to enter directly to the DB via sqlplus I get the error:
/opt/oracle/product/11.2.0/dbhome_1/bin/sqlplus sys@UBI as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Wed Nov 20 13:18:23 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12528: TNS:listener: all appropriate instances are blocking new connections
I tried restarting server, DB, listener, but nothing helped.
I've Googled and saw that I need to unregister some old connections, which were not closed correctly, i.e. entering DB and delete some records,
but I cannot login to the sqlplus.
I failed login as sys, system, scott - on the same error.
How can I solve this issue?

ls $ORACLE_HOME/dbs
dbs httpFileTransfer.py init.ora lkUBI peerapp_catalog qoe_network_offset.template subscriberUpdate.py
hc_ubi.dat index.html.1 initUBI.ora orapwubi profile.sql spfileubi.ora
padmin@rprt:~> /opt/oracle/product/11.2.0/dbhome_1/bin/sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Wed Nov 20 18:09:04 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORA-48108: invalid value given for the diagnostic_dest init.ora parameter
ORA-48140: the specified ADR Base directory does not exist [/opt/oracle/product/11.2.0/dbhome_1/dbs/<ORACLE_BASE>]
ORA-48187: specified directory does not exist
Linux-x86_64 Error: 2: No such file or directory
Additional information: 1
SQL>

TNS-12528: TNS:listener: all appropriate instances are blocking new connect

Hi all,
May be you remember that i posted connection problem to my database and when checking mi listener log file i found the error TNS-12528 as in the following portion of my alert log file:
05-NOV-2007 11:37:42 * service_died * abdb1 * 12537
05-NOV-2007 11:37:42 * service_died * abdb1 * 12537
05-NOV-2007 11:37:49 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=abdb)(CID=(PROGRAM=E:\mvoucher\bin\SMPPGateways\Transmitter\PyroESMEt.exe)(HOST=MGUTP)(U
SER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.175)(PORT=4517)) * establish * abdb * 0
05-NOV-2007 11:37:52 * (CONNECT_DATA=(SID=abdb1)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.204)(PORT=1437)) * establish
* abdb1 * 12505
TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
05-NOV-2007 11:37:55 * (CONNECT_DATA=(SID=abdb1)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.204)(PORT=1440)) * establish
* abdb1 * 12505
TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
05-NOV-2007 11:37:55 * service_update * abdb2 * 0
05-NOV-2007 11:37:56 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=abdb)(CID=(PROGRAM=E:\mvoucher\bin\SMPPGateways\Transmitter\PyroESMEt.exe)(HOST=MGUTP)(U
SER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.175)(PORT=4518)) * establish * abdb * 12528
TNS-12528: TNS:listener: all appropriate instances are blocking new connections
05-NOV-2007 11:37:57 * (CONNECT_DATA=(SID=abdb1)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.204)(PORT=1443)) * establish
* abdb1 * 12505
TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
05-NOV-2007 11:37:59 * (CONNECT_DATA=(SID=abdb1)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.204)(PORT=1446)) * establish
* abdb1 * 12505
TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
05-NOV-2007 11:38:01 * (CONNECT_DATA=(SID=abdb1)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.204)(PORT=1449)) * establish
* abdb1 * 12505
Does anybody have an idea about why this error is comming.
Note that we are using oracle 10g in a RAC environment with 02 nodes.
Thanks for your help.
Raitsarevo

I don't use SID in my tnsnames.ora, i use SERVICE_NAME and it's OK. May be someone who have configured iot's tnsnames made it wrong because there consultant installaing new application in our company and may be their tnsnames was wrong and causing that problem. Because in their application it always tries to connect in the database till connection will be established and may be it increase the database session number.
Isn't it and when session max number is reached may be database connection will hang.
Correct me if it is the case, we will have a look in their applivcation tnsnames configuration.
Thanks
regards
Raitsarevo

HELP! Gateway stops accepting new connections

Config: PS6.1 on Solaris 9 (Sparc), seperate gateway on Solaris 9 (Sparc) The PS6.1 was migrated from a PS3.0 installation, The machines are V240 with 2GB RAM and 4GB swap.
I start the GW with: ./S43gateway -n default start debug
Several minutes after startup (it varies from 1 to 40) I get the following message:
Class Name: com.sun.portal.rproxy.rewriter.services.idsame.IDSAMEDataServiceStub04/02/2004 07:29:07:823 PM CST: Thread[Thread-14,5,main]
ERROR: RemoteHandler : ERROR on remote machineAfter a while, something will trigger the following set of messages and that's when the gateway stops accepting new connections.
ESessionMsg caught exception when reading:
java.io.EOFException
        at java.io.DataInputStream.readFully(DataInputStream.java:153)
        at com.sun.portal.netlet.econnection.ESessionMsg.readMsg(ESessionMsg.java:24)
        at com.sun.portal.netlet.eproxy.EProxyConnection$ESessionThread.run(EProxyConnection.java:114)
        at com.sun.portal.util.ThreadPoolThread.run(GWThreadPool.java:109)
java.lang.OutOfMemoryError
        <<no stack trace available>>The OutOfMemoryError will keep coming out for a while, why it stops, I don't know. When this does happen, the java process is only using about 220MB of RAM and only about 10 users are logged-in.
This was working fine until we changed the IP of the gateway and moved its ethernet connection to "outside" the firewall. I re-installed the gateway software to make sure I didn't miss anything other than platform.conf. I have the webproxy enabled for the bookmarks channel and that is working. I have holes in the firewall for the proxy, LDAP and HTTPS ports.
Any ideas?
Thanks,
Roger S.

The gateway has to be tuned substantially to get good performance.
The tuning needs to be based on your load
e.g how many netlet connections, how many concurrent users you expected to handle etc ..
the default min heap size and max heap size need to change it. You can go upto a max of 2 Gb but I would recommend starting with a smaller heap size of 500 M and see how your performance goes.
The min and max heap size should always be the same for better performance. If your using netlets then you have to change the thread parameter. Each netlet connection uses two threads so if your using a large number of netlet connections then your thread count needs to 500 at a minimum to support 200 concurrent netlet sessions. Increasing the thread pool will also use more memory as each thread uses a min of 512 K of memory. The thread stack size needs to be set to 128 K.
These are the initial things to start with, you can also set jvm option -verbose:gc to enable gc logs. This will show memory usage.
These are good things to start with ..

Problem creating a new connection instance with MSVC7.1

Hi all,
I have a problem with MSVC7.1 and the OCCI library. I am getting an unhandled exception error when trying to create a new connection:
con = env->createConnection (user, passwd, db);
I have seen a thread about MSVC7.0 and the patchset 9.2.0.4, but is it true to say that this one is only fixing the problem with MSVC7.0?
Does anyone know how I can get OCCI to work with MSVC7.1?
Thanks,
Niek

Shankar,
Thanks for the suggestion. Its a static executable so it shouldn't be looking for the DLL. I've put %ORACLE_HOME%\oci\lib\msvc\vc71 first in the PATH anyway, just in case we change to dynamic linking in future.
Just in case it was linking to the worng oraocci10.lib I also temporarily renamed any oraocci10.lib libraries in any other directory under C: to xxxoraocci10.lib, just to be sure. The problem still occurs. Any other ideas please?
The Visual Studio .NET 2003 link command is:
/OUT:"C:\adapters_build\osmm_adapter\Debug/osmm_adapter.exe" /INCREMENTAL:NO /NOLOGO /LIBPATH:"C:\oracle\product\10.1.0\Client_1\oci\lib\msvc\vc71" /LIBPATH:"C:\oracle\product\10.1.0\Client_1\oci\lib\msvc" /NODEFAULTLIB /DEBUG /PDB:"C:\adapters_build\osmm_adapter\Debug/osmm_adapter.pdb" /SUBSYSTEM:CONSOLE /MACHINE:X86 ociw32.lib msvcrt.lib msvcprt.lib oraocci10.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib
User environment variable lib is:
C:\Program Files\Microsoft Visual Studio .NET 2003\SDK\v1.1\Lib\;C:\Program Files\Microsoft Visual Studio\VC98\mfc\lib;C:\Program Files\Microsoft Visual Studio\VC98\lib
System environment variable LIB is: C:\Program Files\Microsoft Visual Studio .NET 2003\SDK\v1.1\Lib\
regards
Rich

Enterprise manager is not able to connect to database instance

Hi
I am having a problem with Oracle EM. I would appreciate very much if anyone can help me.
I installed Oracle on XP which runs on virtual pc on XP as well. Everything is fine, I can connect to database with sqlplus, and there were no errors during installation.
But the problem is that, when I try to connect to database with EM, it says:
Enterprise manager is not able to connect to database instance . The state of the components are listed below.
Can anoyone help me?

user10637311 wrote:
When you want OEM DB , your existing DB should be created by DBCA or if suppose manually creaed DB then you have to configure that DB to EM by
"emca -config dbcontrol db -repos create". for these two cases istener should be running.
emctl start dbconsole -> to start dbconsole service
emctl status dbconsole-> status of servicesI am sorry, I was looking at $ORACLE_HOME\admin . And in the proper path, both listener.ora and tnsnames.ora do exist.
emca -config dbcontrol db -repos create :
<last part>:
INFO: This operation is being logged at C:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-02-18_02-01-40-AM.log.
Feb 18, 2010 2:02:46 AM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error creating the repository
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\or
cl\emca_repos_create_<date>.log for more details.
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error creating the repository
Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2010-02-18_02-01-40-AM.log for more details.
Could not complete the configuration. Refer to the log file at C:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\orcl\emca_2010-02-18_02-01-40-AM.log for more deta
ils.
C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\or
cl\emca_repos_create_<date>.log:
Check if repos user already exists.
old 6: WHERE username=UPPER('&EM_REPOS_USER');
new 6: WHERE username=UPPER('SYSMAN');
old 8: IF ( '&EM_CHECK_TYPE' = 'EXISTS') THEN
new 8: IF ( 'NOT_EXISTS' = 'EXISTS') THEN
old 11: raise_application_error(-20000, '&EM_REPOS_USER does not exists..');
new 11: raise_application_error(-20000, 'SYSMAN does not exists..');
old 14: ELSIF ( '&EM_CHECK_TYPE' = 'NOT_EXISTS' ) THEN
new 14: ELSIF ( 'NOT_EXISTS' = 'NOT_EXISTS' ) THEN
old 17: raise_application_error(-20001, '&EM_REPOS_USER already exists..');
new 17: raise_application_error(-20001, 'SYSMAN already exists..');
old 21: raise_application_error(-20002, 'Invalid Check type &EM_CHECK_TYPE');
new 21: raise_application_error(-20002, 'Invalid Check type NOT_EXISTS');
DECLARE
ERROR at line 1:
ORA-20001: SYSMAN already exists..
ORA-06512: at line 17

Error during connect to the instance Content Server MAXDB-XSERVER Receive

We rebooted this mornning a PROD Instance with SAPDB!
Second Instance is a Content Server. Now, we got an error during connect via
DBM Gui to Maxdb 7.6.06.04
2011-08-19 10:06:32 577 ERR 11926 XSERVER Receive packet, Ref:8 - socket recv error (110:Connection timed out
Environment variable : 1. Insctance PROD
2. Instance Prod Content Server
We couldnt connect to the database Instnce via DBMgui and also DB50 all collected data are visible, but its possible to start
DBACOCKPIT, analyse DB analyser : Message
Info Size of data cache 260306 pages, 99.98% in use, size of converter cache 1762 pages
Its seems so regarding to the Info of DB Analyser: Instance CSP (sap1) is up since 2011-06-10 12:20:10 that the Content server
didnt recognize that there was a boot this morning!!
In DBACOCKPIT it seems to be o.k. ! We could not boot the PROD Host asap again, because of the maintenance time window!
Where we could check more featur. of the content server. The processes seems to be o.k.!

> Near the same problem occurs on our backup content server MAXDB!
> The backup runs during this situation a expanded longer time as normal. I get in DBM Gui today always the error code -4 socket recieve error, the Icon goes green, but there isnt any possibility to analyse the check area -> Diagnosis Files, to improof the status via gui! Via tc DBACOCKPIT i could connect to the instance and get some data! For example, If i try to stop the DB analsyser, its not possible.
I would stop the full gui and also end all dbm*.exe processes in the task manager and start it new.
Markus

AS 70SR2 (WP's) stops when connecting to upgraded system.

Hi,
I have installed an application server (NW7.0SR2) for our new ECC60 sandbox, which is upgraded from 4.6C. The AS and the DB server are on 2 different hosts.
When I try to start the AS it seems to work but the processes dies. The AS server is 64bit W2K3 ENT SP2 R2 with 12GB RAM.
I would really appreciate some input:)
Here are the trace files dev_disp and dev_w0
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        S23
systemid   562 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    179
intno      20050900
make:      multithreaded, ASCII, 64 bit, optimized
pid        2808
Fri Oct 03 12:39:57 2008
kernel runs with dp version 241(ext=110) (@(#) DPLIB-INT-VERSION-241)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2808) [dpxxdisp.c ; 1285]
shared lib "dw_xml.dll"; version 179 successfully loaded
shared lib "dw_xtc.dll"; version 179 successfully loaded
shared lib "dw_stl.dll"; version 179 successfully loaded
shared lib "dw_gui.dll"; version 179 successfully loaded
shared lib "dw_mdm.dll"; version 179 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 36000
Fri Oct 03 12:40:01 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c ; 5418]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >dksnss23ap3_S23_01                      <
DpShMCreate: sizeof(wp_adm) 11024 (1224)
DpShMCreate: sizeof(tm_adm) 5283968 (26288)
DpShMCreate: sizeof(wp_ca_adm) 18048 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
DpShMCreate: sizeof(comm_adm) 552064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1616)
DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000D7B0050, size: 5941072)
DpShMCreate: allocated sys_adm at 000000000D7B0050
DpShMCreate: allocated wp_adm at 000000000D7B1C90
DpShMCreate: allocated tm_adm_list at 000000000D7B47A0
DpShMCreate: allocated tm_adm at 000000000D7B4800
DpShMCreate: allocated wp_ca_adm at 000000000DCBE880
DpShMCreate: allocated appc_ca_adm at 000000000DCC2F00
DpShMCreate: allocated comm_adm at 000000000DCC4670
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000DD4B2F0
DpShMCreate: allocated gw_adm at 000000000DD4B370
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000DD4B3A0
DpShMCreate: allocated wall_adm at 000000000DD4B3B0
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Oct 03 12:40:02 2008
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( dksnss23) [dpxxdisp.c ; 12408]
DpStartStopMsg: send start message (myname is >dksnss23ap3_S23_01                      <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
Release check o.K.
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c ; 1050]
Fri Oct 03 12:41:02 2008
ERROR => DpWPCheck: W0 (pid 1680) died (severity=0, status=0) [dpxxdisp.c ; 15534]
ERROR => DpWPCheck: W2 (pid 720) died (severity=0, status=0) [dpxxdisp.c ; 15534]
my types changed after wp death/restart 0x89 --> 0x88
ERROR => DpWPCheck: W4 (pid 2212) died (severity=0, status=0) [dpxxdisp.c ; 15534]
ERROR => DpWPCheck: W5 (pid 1908) died (severity=0, status=0) [dpxxdisp.c ; 15534]
ERROR => DpWPCheck: W6 (pid 1136) died (severity=0, status=0) [dpxxdisp.c ; 15534]
my types changed after wp death/restart 0x88 --> 0x80
ERROR => DpWPCheck: W8 (pid 888) died (severity=0, status=0) [dpxxdisp.c ; 15534]
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:12 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Oct 03 10:41:12 2008
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA     1680 Ended         no      2   0        0
1 DIA     2152 Ended         no      1   0        0
2 DIA      720 Ended         no      2   0        0
3 DIA     2556 Ended         no      1   0        0
4 DIA     2212 Ended         no      2   0        0
5 DIA     1908 Ended         no      2   0        0
6 BTC     1136 Ended         no      2   0        0
7 BTC     1284 Ended         no      1   0        0
8 BTC      888 Ended         no      2   0        0
Dispatcher Queue Statistics Fri Oct 03 10:41:12 2008
===========================
--------++++--
+
| Typ |    now |   high |    max | writes | reads |
--------++++--
+
| NOWP |      0 |      2 |   2000 |     11 |     11 |
--------++++--
+
| DIA |      5 |      5 |   2000 |      5 |      0 |
--------++++--
+
| UPD |      0 |      0 |   2000 |      0 |      0 |
--------++++--
+
| ENQ |      0 |      0 |   2000 |      0 |      0 |
--------++++--
+
| BTC |      0 |      0 |   2000 |      0 |      0 |
--------++++--
+
| SPO |      0 |      0 |   2000 |      0 |      0 |
--------++++--
+
| UP2 |      0 |      0 |   2000 |      0 |      0 |
--------++++--
+
max_rq_id 14
wake_evt_udp_now 0
wake events       total    11, udp     9 ( 81%), shm     2 ( 18%)
since last update total    11, udp     9 ( 81%), shm     2 ( 18%)
Dump of tm_adm structure: Fri Oct 03 10:41:12 2008
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks Fri Oct 03 10:41:12 2008
=============================
Slots: 300, Used: 1, Max: 1
--------++--
+
|   id | owner        |   pid    | eyecatcher |
--------++--
+
|    0 | DISPATCHER   |       -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:17 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >dksnss23ap3_S23_01                      < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2812) (SOFT_KILL)
Stop icman
killing process (2764) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2812 HANDLE:512)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:18 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2812 HANDLE:512)
wait for end of icman
[DpProcDied] Process lives (PID:2764 HANDLE:520)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:19 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2764 HANDLE:520)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:20 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2764 HANDLE:520)
DpStartStopMsg: send stop message (myname is >dksnss23ap3_S23_01                      <)
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Fri Oct 03 12:41:21 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c ; 12754]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 524 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 524 (pos=2)
SiSelNRemove: removed sock 524
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/9
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 17)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 524
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2808) [dpxxdisp.c ; 10952]
Good Bye .....
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Fri Oct 03 12:40:02 2008
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\S23\D01\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\S23\D01\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\S23\D01\exe\dboraslib.dll' is "700.08";, patchlevel (0.107)
B New connection 0 created
M sysno      01
M sid        S23
M systemid   562 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    179
M intno      20050900
M make:      multithreaded, ASCII, 64 bit, optimized
M pid        1680
M
M kernel runs with dp version 241(ext=110) (@(#) DPLIB-INT-VERSION-241)
M length of sys_adm_ext is 364 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1680) [dpxxdisp.c ; 1347]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 11024 (1224)
M DpShMCreate: sizeof(tm_adm) 5283968 (26288)
M DpShMCreate: sizeof(wp_ca_adm) 18048 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1616)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F7B0050, size: 5941072)
M DpShMCreate: allocated sys_adm at 000000000F7B0050
M DpShMCreate: allocated wp_adm at 000000000F7B1C90
M DpShMCreate: allocated tm_adm_list at 000000000F7B47A0
M DpShMCreate: allocated tm_adm at 000000000F7B4800
M DpShMCreate: allocated wp_ca_adm at 000000000FCBE880
M DpShMCreate: allocated appc_ca_adm at 000000000FCC2F00
M DpShMCreate: allocated comm_adm at 000000000FCC4670
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000FD4B2F0
M DpShMCreate: allocated gw_adm at 000000000FD4B370
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000FD4B3A0
M DpShMCreate: allocated wall_adm at 000000000FD4B3B0
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M
M Fri Oct 03 12:40:03 2008
M ThInit: running on host dksnss23ap3
M calling db_connect ...
C Prepending D:\usr\sap\S23\D01\exe to Path.
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c06d007e) [dpnttool.c ; 438]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c06d007e (Unknown exception)
App       : disp+work.EXE (pid=1680)
When      : 10/3/2008 12:40:3.953
Threads   : 2
Computer Name       : DKSNSS23AP3
User Name           : s23adm
Number of Processors: 2
Processor Type: AMD64 Family 15 Model 65 Stepping 2
Windows Version     : 5.2 Current Build: 3790
State Dump for Thread Id bf8
--> (FAULT) Stack Back Trace <--
FramePtr         ReturnAd         Param#1          Function Name
0000000006bdf720 000000001003c72a 0000000000000003 kernel32!PulseEvent
0000000006bdf7f0 000000001003be46 000000001015b000 dboraslib!__delayLoadHelper2 [delayhlp.cpp (271)]
0000000006bdf860 000000001000397d 0000000006bdf8b0 dboraslib!_tailMerge_OCI_dll
0000000006bdf8c0 00000000100208a8 0000003d00000000 dboraslib!get_oci_client_version [dboci.c (2823)]
0000000006bdfa90 0000000001241037 0000000006bdfd80 dboraslib!DbSlConnect [dbsloci.c (1860)]
0000000006bdfce0 000000000124146e 0000000000000000 disp+work!open_con [dbcon.c (3582)]
0000000006bdfd50 000000000124462e 00000000ffffffff disp+work!supply_con [dbcon.c (3835)]
0000000006bdfd90 0000000001236e6c 0000000000000001 disp+work!dbsl_connect [dbslxxx.c (232)]
0000000006bdfdf0 00000000004cb61f 00000000094d4ba4 disp+work!db_connect [dblink.c (422)]
0000000006bdfe80 00000000004dd569 0000000006c5cb7d disp+work!ThInit [thxxhead.c (1442)]
0000000006bdfeb0 000000000042f93b 000007ffe3920000 disp+work!ThStart [thxxhead.c (1142)]
0000000006bdfee0 000000000040109d ffffffff00000003 disp+work!DpMain [dpxxdisp.c (1164)]
0000000006bdff10 000000000199e0c1 0000000000000000 disp+work!nlsui_main [thxxanf.c (84)]
0000000006bdff70 0000000077d5964c 0000000000000000 disp+work!mainCRTStartup [crtexe.c (501)]
0000000006bdffa0 0000000000000000 000000000199df50 kernel32!BaseProcessStart
State Dump for Thread Id 63c
--> Stack Back Trace <--
FramePtr         ReturnAd         Param#1          Function Name
000000000d79fe40 0000000077d5f691 0000000006c1e1a0 ntdll!NtFsControlFile
000000000d79feb0 00000000018886df 0000000000000000 kernel32!ConnectNamedPipe
000000000d79ff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (679)]
000000000d79ff70 0000000077d6b6da 0000000077d6b6a0 msvcrt!endthreadex
000000000d79ffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
M -
M
M Fri Oct 03 12:40:04 2008
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 1, th_errno 11, action 4)
M
M Info for wp 0
M
M    pid = 1680
M    severity = 0
M    status = 0
M    stat = WP_RUN
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source =
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server dksnss23ap3_S23_01 on host dksnss23ap3 (wp 0)
M * ERROR       ThSigHandler: signal
M *
M * TIME        Fri Oct 03 12:40:04 2008
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          11
M * MODULE      thxxhead.c
M * LINE        10754
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c ; 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c ; 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1680) [dpnttool.c ; 333]
M return from clean-up function ...

You said your "AS server is 64bit",,, but the error on dev_w0 talks about Kernel32...
Maybe thats the problem
0000000006bdf720 000000001003c72a 0000000000000003 kernel32!PulseEvent
Regards
Juan

How to create a new connection from SAPGUI to Test drive?

Hi,
I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
I entered the following values for my new connection entry
Description: SAP Netweaver
Application server: 192.168.1.160
Instance number: 01
System ID: DB2
SAProuter: /H/192.168.1.160/S/3201/H/
But it does not work. Any idea about the values needed for creating a new entry?
Thanks in advance,
Dariyoosh

>
Dibya R Das wrote:
> Why are you entering a router string? Can't you reach a box directly from your machine?
>
> Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
>
> Remove the router string you wont need if the above works.
>
> - Regards, Dibya
Hello there,
Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
Kind Regards,
Dariyoosh

Stop new connections to an instance

Similar Messages

Maybe you are looking for