Stopping a Timer with Lingo

Hey,
I had this working this morning but I have changed something that has stopped it working and I can't figure out what I have broken.
On completing the maze, I need the timer to stop because otherwise, the score keeps changing (as the score is worked out from the countdown timer).
I'm sure somebody could work it out where I have gone wrong in seconds and I could really do with fixing this now as the game must be complete within the next couple of days.
The file is here
Thanks in advance guys I really need help with this one.

No one able to help me with this!?

Similar Messages

Detect and install quick time with lingo

When I import a quick time movie into Director presentation - it needs QuickTime to be installed on every computer to run properly
Is there any setting which may make these kind of movies run on any computer without QuickTime?
Is there a Lingo script which may solve it?
Otherwise is there any Lingo code to check for the presence of QuickTime and then react accordingly if the user doesn't have it installed ? (probably display a screen that offers to install QuickTime or quit the movie)
any idea?
Thanks a lot in advance.
sof

Is there any setting which may make these kind of movies run on any computer without QuickTime?
No - if you want to display QuickTime movies (or use #quickTimeMedia members in Director) the playback machine must have QuickTime installed on it.
Otherwise is there any Lingo code to check for the presence of QuickTime and then react accordingly if the user doesn't have it installed ?
There is the QuickTimeVersion() command (which you would have discovered if you had checked the Help file):
on prepareMovie
if QuickTimeVersion() < 7.0 then
    _player.alert("You need to install QuickTime - please re-start this program when the installer finishes")
    -- assuming the installer is in the same folder as the current movie/projector
    _player.open(_movie.path & "QuickTimeInstaller.exe")
    _player.quit()
end if
end

I keep trying to burn a CD-R in Iphoto, and every time iPhoto stops burning halfway through and i get this error message, "Attemp to burn a disc failed. Burn failed due to a medium write error." I am using memorex CD-R's and have tried with 4 times with d

I keep trying to burn a CD-R in Iphoto, and every time iPhoto stops burning halfway through and i get this error message, "Attemp to burn a disc failed. Burn failed due to a medium write error." I am using memorex CD-R's and have tried with 4 times with different CD's. Is this a software or hardware problem? Any info would be awesome

Export the photos to a desktop folder, right click on the folder and burn to disk - see if that is any different
LN

Mac OS X 10.7 Time machine stopped backing up with WD ShareSpace

Yesterday, I updated my network drive, a WD ShareSpace, firmware to version 2.3.01. This is a much awaited WD update. This was an update to provide compatibility with Mac OS X 10.7 Lion. The WD ShareSpace is conenctde to my router for total network conenctivity. The MacBook Air wirelessly conencts to the router.
On my MacBook Air, I started Time Machine. The WD ShareSpace was recognized by Time Machine, and after logging into the WD ShareSpace, Time Machine started backing up the MacBook Air. Wonderful! Then after about 5 hours it stopped the backup with the error "Cannot find networked drive" or something similar. The WD ShareSpace was up an running and later today completed my Windows daily backup without errors.
Under these conditions, the only significant options were to look at the backup, open preferences, or to
What might have happened to cause the backup to stop?
Now a day later the WD drive seems to have become disconnected from the MacBook Air. The finder does not even show the WD Sharespace in the finder view like it did yesterday. I have restarted the MacBook Air with no improvement in the situation.
Charles

Updating OS X Lion to version 10.7.2 helped the problems and allowed the network to become better behaved. Further analysis of the problem indicates that Time machine becomes disconnected from the WD_ShareSpace when the router renews DHCP leases. When the IF address is renewed with a different IP address from that previously assigned, Time machine cannot access the network drive and creates an error causing the network disconnect.
I have changed the IP address from DHCP to Static assignment. I will track this progress ove rthte next few days.

How do I stop sharing mail with other users on my computer

How do I stop sharing mail with other users on my Macbook pro?

You may have to set up different user accounts in the computer if you wish to
continue sharing the computer among other people, and only use the Mail app.
Otherwise, if you use a webmail such as yahoo, gmail, or other, just use a browser
and login each time; then there is no saving of your email to the computer as such.
I've never used an email client software, nor had an ISP based email account. So
my numerous computers have never downloaded email into software. No loss.
But the answers do include setting up extra user accounts, not admin level, so the
other users do not mess with the operating system; a standard account or just a
guest account to use a browser to access web-based login email accounts, works.
There are third-party email client for OS X, some are free applications, others are
part of a larger browser product, such as SeaMonkey, & other Mozilla derivatives.
They provide an email segment or client aspect; unlike Firefox that's a browser.
Setup information should be within the Help viewer in the computer itself. Or by a
simple search online, including the OS X version and any email client software
your computer may have installed. Some browser software includes email client.
Also there are several ways to go in this matter. I don't see questions, only answers.
To learn how the Mail application works, if you want to import everyone's mail, then
figure how to set up user accounts in the OS X. Or use web-mail & login by browser.
Hopefully you can find the best solution for the unasked question.
Good luck & happy computing!

Would love Steve Jobs to contact me for in setting screen tinting orange for seizures as OK WE HAVE DONE IT AN ORANGE PROTECTIVE SCREEN OVERLAY FOR IPOD AND IPAD STOPPING JOHN'S photosensitivity SEIZURES AND STOPPING EYE PROBLEMS WITH USAGE

OK WE HAVE DONE IT AN ORANGE PROTECTIVE SCREEN OVERLAY FOR IPOD AND IPAD STOPPING JOHN'S SEIZURES AND STOPPING EYE PROBLEMS WITH USAGE ABLE TO CUT ANY SIZE FOR PHONES EG
Contact me Steve the idea is great and the pictures are reveal a better depth perception of colour call me a Mum that created a diffence for her son and kept him communicating on his ipod and his ipad proffessors were amazed at childrens hospital and would love to show you my ideas in making it built in to your ipod and ipads or any computer for that matter everyone i show is blown away not only that but a wider customer level will be reached from a Mum that made a difference for her son that was unable to communicate and then had seizures so developed my own cover that allows him to chat all day without having any eye problems.
So we now sell the covers on ebay to help others access technology that they need in order to survive and live happily as without his ipod or ipad and him telling us what was wrong he would of died he had respritory lung disease photosensitive epilepsy a metabolic condition that could of killed him anytime from stroke or seizure battled with using all types of technology but now is a dream come true.
Would love for this to be enabled in the setup of all computers alike to protect eyes and allow more users to speak and communicate a big thankyou to the creators and designers fabulous but please can you call me as this could make you even better i mean will and also give me more time.
From one praying God fearing Mum
Nadine
Call me i do have better pics they were too big to upload orange covering on right hand side

Going through the feedback and support pages will be a waste of your time. Apple won't respond to feedback, and support can't do anything regarding product suggestions, particularly not from a company with an existing product they wish to sell. The only attention you might get from Apple would be possible interest in selling your product through the Apple Stores, and I don't know how Apple chooses the third-party products they sell. All I could suggest would be writing to Apple's corporate headquarters:
Apple
1 Infinite Loop
Cupertino, CA 95014
with perhaps "Attention: Retail Sales Division" and telling them about your product and your interest in it being sold through the Apple Stores.
Regards.

Major Stopping/Skipping Problem With 30G Photo iPod

Hi all. I'll try to give the short version of my major iPod problems I've been having. It's been going on for a couple months straight now.
The first thing that started happening was, in the middle of playing a song, it would freeze, and then start skipping through of the rest of the tracks on that playlist or album. It would sometimes make a "whirring" sound when going from track to track without playing them. Sometimes, this process would start instead when trying to manually skip from one song to another...it would just start to skip through tracks. It had to be restarted a bunch of times, and none of these problems had been present in the 2 or so years previous I owned it. Eventually, it showed an "unhappy face" and nothing else could be done.
I brought it back to Best Buy, where I bought it, as it was still under warranty for another year. They sent the iPod back to Apple for repairs. The "repaired" iPod was back in my hands in about 3 weeks, and for a week or so worked perfectly. Then, it started having the skipping tracks problem again.
Not long there after, it started having more serious problems. It needed to be resetted very frequently. The skipping of tracks, the first warning sign, became the least of it's problems. It needed to be completely restored. The first time it was restored, it got through about 600-1000 of the 5800 songs on it, then stopped and said the restore failed.
Other times, it showed the dreaded "1418" message. Other times it had messages like these:
Attempting to copy to the disk “Andrew’s iPod” failed. An unknown error occurred (-69).
The iPod “Andrew’s iPod” cannot be synced. The disk could not be read from or written to.
The iPod “Andrew’s iPod” cannot be synced. The required file cannot be found.
Eventually, it synced correctly. But the problems continued, and over the course of two weeks it had to be completely restored about 3 or 4 times, although it would then work again perfectly fine for, like, an hour.
So I took it back in again. This time, Best Buy told me that I would be quickly sent back a "Refurb" unit (a refurbished iPod that someone else had returned, I guess and had then been fixed or what have you.)
After a few days, I got the refurb unit. It's not my old iPod, I could tell just by looking at the front and back. And, for about 2 weeks, it worked absolutely perfectly. It reloaded like a charm, and played completely fine. The battery life seemed a little iffy, but nothing crazy.
Then, yesterday, this iPod that *is not* the same iPod I returned as far as I can tell, is having THE EXACT SAME PROBLEM. Yesterday, in the middle of a song that I had played many times before, it froze, stopped, and started skipping songs. It needed to be reset, what else is new. So, I did, and got the "unhappy face" with the address of iPod support once again.
I'm really confused. What is the problem here? When I had my first unit returned, I figured perhaps the problem hadn't been addressed. But this doesn't even appear to be the same unit.
Could there be a problem with iTunes 7.1.1 with my iPod? For what it's worth, I followed the advice found online to try to find corrupted music files, and can't find any. When it had restore problems with the last unit, I checked to see if it was stopping on any particular song, and it was different every time. Even so, I erased those songs just in case.
Also, when it freezes and stops now (and with the old unit, for that matter) it was never the same song. And it was almost always on a song that had already been played many times, perfectly fine, many times before, and recently to boot. I've also played through almost every song through iTunes over the last couple months to check for any obvious problems, and never found any.
With over 5750 songs on my iPod, I don't know how I can possibly know with complete certainty if there's anything with a problem amongst them, although completely erasing my iPod library that until 2 months ago never had a problem is kind of a worst case scenario.
What on earth could be wrong with my iPod? It's currently plugged into an outlet, vacillating between the Apple symbol and the "unhappy face." Anyone have ANY ideas?!?!?

I wondered what a 'photo' iPod was. This forum is for the 5G video. I don't know how long an iPod is supposed to last. I think it is based on use and how roughly it is handled if it is a hard-drive model.
Maybe time for a new machine?

My macbook isn't powering up and makes a beeping noise in time with the sleep light

Hi There I hope someone can help!!!
I had disconnected the power cable and left the MacBook in sleep mode with the lid shut. When I now go to open my MacBook up, and wait for my system to resume from where I left off the screen doesn't on and the sleep light goes off. when I close the lid the sleep light goes back on as if it is in sleep mode but the same happens when I open it again, no power to the screen.
I order to try get my MacBook working again I tried holding down the power button and switching it back on again but the MacBook now looks as if it is going to power up but the sleep light comes on for about 3 secs and then beeps, then every 4-5 secs constantly the MacBook beeps once in time with the sleep light (to note the sleep light is not following its usual fade on fade off rhythm).
I have tried resetting the SMC using the shift command control option and power button (also this is the only way to stop the beeping and flashing) and when you try and switch on the MacBook if you just press the power button it just follows the same beep with sleep light routine, but if you hold the power button in then the sleep light then flashes quickly about 4-6 times and then starts to beep in time with the flash again.
I will also add I have not reconfigured anything or added any RAM to my MacBook it is still on the standard (manufacturing) configuration as I have been looking about for anyone with similar issues and the main question back seems to be have you changed the RAM, I have also tried resetting teh RAM and the proble still persists.
If someone can help it would be awesome!

Here's the Apple support article on beeps https://support.apple.com/kb/HT1547

In billing document VAT condition type flowing 2 times with Different value

Hi,
1. In my requirement, In order creation time , in the pricing procedure ZPROJT (Proj Material Sales) VAT condition type (JLST) is flowing one time with the condition record of 5% for one line item and the same we changed manually to 12.75 %, for the same condition type (JLST) and we saved the order. After that we created delivery with reference to the same order, final the billing document creation time with reference to the delivery (in the pricing procedure ZPROJT (Proj Material Sales))for the same line item VAT condition type (JLST) is flowing 2 times with 2 different values ( 5% and 12.75%) and it is calculating the 2 different values to the final value. But normally only the manually changed (12.75%) value should be taken to the account. Please help me How to stop the condition type (VAT C Type "JLST") from flowing two times for the same line item in the billing - and we need to take the value of (12.75% manually changed value) to the final calculation.
2. In one pricing procedure normally if you add the same "C Type" for two times it will throw the error message like "Duplication Of C type" and you can't save the order with out deleting the same. Please tell me, where is the contole for the same.

Hi,
Check copy control settings in VTFL
At item level make pricing type as D - Copy pricing elements unchanged
KAPIL

How can I change the appearance and text on 'Continue from where you stopped last time?' dialogue

Hi,
I would like to change the appearance (color, header and text) of the 'Continue from where you stopped last time?' dialogue
Could you please help me where to find the files to be edited and how to do so.
Thanks in advance for your help!!!
Stephanie

Hi Stephanie,
Unfortunately there is no way to change the text or appearance of this dialog box. You are stuck with it as is.
www.cpguru.com - Adobe Captivate Widgets, Tutorials, Tips and Tricks and much more..

RAS failed to start - It has stopped 5 time(s) in 60 Minutes

Hi Guys - I am also having same problem with BOXI 3.1 SP2, the RAS not getting started. I did clear all the pending reports restarted BO server couple of times, however the RAS still not getting started.
When I try ti start it maually from BO it gives the above error that "RAS failed to start - It has stopped 5 time(s) in 60 Minutes"
In the WIReportServer log I see following errr -
ceserver.cpp:1066: TraceLog message 1
2011/05/09 16:26:56.802|>>|E| |25457| 45| |||||||||||||||**ERROR:ceserver:invalid entry General\Directories\Config in registry http://ceserver.cpp;1066
Please note this server was running very fine till today, from last 3-4 months. No changes being made to server or configuration. Any suggestions, help much appriciated.
Many Thanks.

We are running on Solaris 10 and my issues is about crystal reports.
Did try restart by clearing all the processes howeve no difference to the RAS same error.
Appriciate any helpful direction..
Thanks..!!

GroupWise POA Agent stopping several times a week.

We have two servers Suse Linux 11.1 64/OES11 with services GroupWise 8.0.2, (POA, MTA and GWIA), we have two post offices, one with 300 and another with 500 users.
When this service was running GroupWise on Netware 6.5, worked perfectly. After migrating to Suse Linux / OES, got a problem with the POA agents, stopping several times a week.
Initially imagined it could be the version of linux suse 10.4 with OES2.3, did a fresh install on two new servers with 11.1 suse linux 64 and OES11, but the problem remains unsolved.
Anyone know if Novell has already found the solution for this problem, because I have a friend with the same problem in your company and is using the GroupWise 2012.

We are having a similar issue (GroupWise POA Agent stopping several times a week). SLES 11 SP1, OES 11, GW build 8.0.3-103395. Output from "dmesg | grep gwpoa" follows:
[220462.269659] gwpoa[43225]: segfault at 0 ip (null) sp 00000000f296877c error 14
[220462.269662] gwpoa[60126]: segfault at 0 ip (null) sp 00000000f0ef977c error 14 in gwpoa[8048000+11e000] in gwpoa[8048000+11e000]
[966980.635533] gwpoa[14401]: segfault at 45 ip 0000000000000045 sp 00000000ef1f985c error 14 in gwpoa[8048000+11e000]

Starting and Stopping a Timer in Java Card + GSM

Hi,
I seem to not be able to start a timer that my applet has
allocated using the PRO_CMD_TIMER_MANAGEMENT
pro active command. I want to for example set the timer
interval to 5 seconds and I understand from the gsm
specs that the TLV value should then be {(byte) 0x00,
(byte) 0x00, (byte) 0x05} as the hour is zero, the minute is
zero and the seconds = 5 .
The command qualifier I set to 0x00 to start the timer and
I set it to 0x02 to stop the timer. The start and stop I
control from two menu items. From the GSM spec the first 2 bits
control the timer and the remaining 6 are RFU (reserved for future use),
now I assume I can then set the RFU bits to 0.
I then have a EVENT_TIMER_EXPIRED in my processToolkit which then plays a tone.
The tone proactive command works but I dont seem to be able to start the time or
stop it ?
HELP ?
is there any suggestions or any error in my reasoning here ?

I tried your solution but it seems to have no effect (?)
This is the log entry of the comms during sneding of the timer start
command:
(Notice that where you have the Timer Identifier tag = A4, here it is
24 and where you have Timer Value Tag = A5, here it is 25 - these tags and the APDU's are generated with the GSM java card libs in the development kit I'm using.....) It seems to go through but the TIMER_EVENT_EXPIRED never happens....Help ? Have a look at the source code I included (maybe I'm doing something wrong)....
**THE APDU's
//346:
A0 12 00 00 13
//Fetch
//     RAPDU = D0 11 81 03 01 27 00 82 02 81 82 24 01 01 25 03 00 00 10
//     SW = 9000
//347:
A0 14 00 00 0C 81 03 01 27 00 02 02 82 81 03 01 31
//>>Terminal response
//     SW = 9142
**SOURCE CODE
//IN A METHOD CALLED FROM A MENU ITEM SELECTED
byte[] valCurrentCallUnit = {
(byte)0x00, (byte)0x00, (byte)0x10
}; //i.e. 1 second
timerHandle = reg.allocateTimer();
proHdlr.init(PRO_CMD_TIMER_MANAGEMENT,(byte)0x00,DEV_ID_ME);
proHdlr.appendTLV((byte) TAG_TIMER_IDENTIFIER,timerHandle);
proHdlr.appendTLV((byte) TAG_TIMER_VALUE,valCurrentCallUnit,
(short) 0, (short) 3);
result = proHdlr.send();
//the following is not suppose to be required according to GSM 11.14
reg.setEvent(EVENT_TIMER_EXPIRATION);
//IN THE processToolkit method, I have:
public void processToolkit(byte event) {
     EnvelopeHandler envHdlr = EnvelopeHandler.getTheHandler();
     ProactiveHandler proHdlr = ProactiveHandler.getTheHandler();
     ProactiveResponseHandler rspHdlr;
switch(event) {
case EVENT_TIMER_EXPIRATION:
doSomething();
proHdlr.init(PRO_CMD_TIMER_MANAGEMENT,
(byte)0x00,DEV_ID_ME);
proHdlr.appendTLV((byte) TAG_TIMER_IDENTIFIER,timerHandle);
proHdlr.appendTLV((byte) TAG_TIMER_VALUE,valCurrentCallUnit,
(short) 0, (short) 3);
result = proHdlr.send();
break;
} /** switch event */
}/** processToolkit */
Any help would be appreciated....

How to Stop the timer in the TimedTrigger UI element when an event occurs

Hi all
I have a webdynpro View where i have many UI elements(which supports an event) along with TimedTrigger UI element.
Now my requirement , i want to check at single line if any event happens in the View then i want to stop the timer in the TimedTrigger UI element.
can you please provide any peace of code related to this??
Thanks
Bindu

Hi Bindu,
From help.sap.com:
http://help.sap.com/saphelp_nw70/helpdata/EN/03/7c6b40dde0980ae10000000a155106/frameset.htm
To prevent events being triggered by UI element TimedTrigger, proceed as follows:
1. Disable the action that is bound to the UI elementu2019s onAction property.
Can be done as:
wdThis.wdGet<Your_TimedTrigger_action>Action().setEnabled(false);
2. Set the value of the delay to 0 seconds
As suggested in previous post to this thread.
3. Disable UI element TimedTrigger
Create a boolean type of context attribute and bind it to the "enabled" property of the Timed Trigger. Set its value to false to disable the timed trigger.
Regards,
Alka.

Macbook air Wi Fi and sound stops every time it goes to sleep. i have to restart it every time to use wifi and sounds. this started happening just after the latest upgrade to X. any reasons why its doing that and how to fix it.

Macbook air Wi Fi and sound stops every time it goes to sleep. i have to restart it every time to use wifi and sounds. this started happening just after the latest upgrade to OS X. any reasons why its doing that and how to fix it.

Test after taking each of the following steps. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved.
2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
6. In some cases, the problem has been resolved by repairing permissions on the startup volume.
7. Turn off Bluetooth and test.
8. Reinstall OS X.

Stopping a Timer with Lingo

Similar Messages

Maybe you are looking for