Stopping My Add-on and Add-on Memory
Hello,
What is the proper code to put in the aet.ShutDown event to properly terminate the add-on?
I tried to put End, but the add-on was still running in the processes after SAP was closed.
another question: why is my add-on taking 63k of memory??
Hi Ralph,
The only thing I can see wrong with your code is that you are calling GC.Collect after exiting the application (ie GC.Collect won't run as the application has already quit).
If you stop the add-on from the Add-on Manager then the event that is fired is aet_ServerTerminition and not aet_ShutDown. Note, there is a 'bug' in SBO that will report that the add-on failed to stop, even though it has unloaded from memory. See SAP note 820898 for more details.
Hope this helps,
Owen
Similar Messages
-
How do I add more memory to my Imac, I only have 1GB of memory and need 2GB to download Yosemite?
Janet,
This is why the question rkaufmann87 asked about your model is so important:
[click chart to enlarge if needed]
The list covers the early iMacs with Intel processors that shipped with either OS 10.4 or 10.5 and have only two RAM slots. As you can see, some have limits to what version of OSX you can install. If the step rkaufmann requests does not narrow down your model, you can do one more thing.
While the "About this Mac" window is open, click the "More Info..." button at the bottom of that window to get this (assuming you are really running OS 10.5.8 as shown in your profile):
The code I've indicated with the red arrow corresponds to the codes in the second column on the chart. Post the code your computer reports--again don't post a serial number.
If your iMac shipped with only 1GB RAM, I fear it is one of the earliest models that cannot be upgraded all the way to Yosemite. -
Have MacBook Pro (ancient) has
2.16 Ghz Intel Core Duo with
1 GB 667 MHz RAM
using OS 10.4.11.
Can I upgrade OS? If so, how far?
And can I add more memory?
I realize this is an old laptop but I need to wait to upgrade to new.if it is the core duo, mac OS X 10.6.8., max ram 2gb.
-
Is it possible to remove unnecessary hardware and add more memory?
I wanted to know if it was at all possible to remove, say, my cd drive and add more memory.
Yes, it certainly is. Look at this link:
http://eshop.macsales.com/item/OWC/DDAMBS0GB/
Ciao. -
Would it be worthwhile to put in a larger hard drive and boost the memory on our early 2008 iMac? We realize it is on borrowed time but we would like to squeeze a little more time out of it.
Problem description:
This iMac is running awfully slow, and freezes up often
EtreCheck version: 2.1.5 (108)
Report generated December 20, 2014 at 1:40:32 PM CST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (24-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 2.8 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR2 SDRAM 800 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 800 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 21:42:10
Disk Information: ℹ️
Hitachi HDP725032GLA380 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 319.21 GB (204.84 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. Built-in iSight
Logitech USB Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.seagate.driver.PowSecDriverCore (5.0.1) [Support]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) [Support]
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) [Support]
[not loaded] com.seagate.driver.SeagateDriveIcons (5.0.1) [Support]
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[running] com.seagate.SeagateStorageGauge.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[running] com.memeo.Memeod.plist [Support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[invalid?] com.leadertech.PowerRegister.EPS2.fa8d34509cfddcea6fdfd2f145193825.plist [Support]
User Login Items: ℹ️
iTunesHelper UNKNOWN (missing value)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 11.5.0r600 [Support]
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
User internet Plug-ins: ℹ️
BrowserPlus_2.9.8: Version: 2.9.8 [Support]
Move-Media-Player: Version: npmnqmp 071505000006 [Support]
3rd Party Preference Panes: ℹ️
BrowserPlus [Support]
Flash Player [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Destinations:
FreeAgent GoFlex Drive [Local]
Total size: 1.00 TB
Total number of backups: 1
Oldest backup: 2014-06-08 05:27:16 +0000
Last backup: 2014-06-08 05:27:16 +0000
Size of backup disk: Excellent
Backup size 1.00 TB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
2% WindowServer
2% com.apple.WebKit.WebContent
1% fontd
0% AppleSpell
0% aosnotifyd
Top Processes by Memory: ℹ️
292 MB Safari
219 MB com.apple.WebKit.WebContent
180 MB mds_stores
150 MB softwareupdated
120 MB installd
Virtual Memory Information: ℹ️
1.61 GB Free RAM
1.86 GB Active RAM
277 MB Inactive RAM
543 MB Wired RAM
626 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 19, 2014, 03:58:57 PM Self test - passed -
How can I add more memory to my iPad?
How can I add more memory to my iPad?
Memory refers to RAM, and can't be increased.
I asume you mean storege space (like 16GB, 32GB, etc). It also can't be increased.
There are some wireless external hard drives that can be used with the iPad.
The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
Cheers, Tom -
How do I add more Memory to the 2 open slots in my iMac - it is 4GB now
How do I add more Memory to the 2 open slots in my iMac ??? It is 4GB now and I get the spinning beach ball often when several Apps are running.
Does the Apple Store sell and install???
Please advise if you have upgraded your iMac memoryGo to a website such as OWC or Crucial's, determine which type of RAM your computer needs, and buy it from that site. They provide installation instructions on the site.
(115474) -
Can i add more memory to my macbook pro?
It currently has 4 GB installed. Can I add more memory?
Which model MBP do you have? 15" late 2011, for example.
Go to the Crucial website and use the System Scanner tab to determine which upgrades are available for your model - you don't have to buy from Crucial, but they do offer some of the best RAM for Macs available.
Good luck,
Clinton -
How do i add more memory to my imac
I need to add more memory to my imac and how do i go about it.
Append the last three characters of the iMac's serial number to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= , load the page, and look up the required specifications and installation instructions.
(100785) -
Should I add more memory when I update my iMac from 10.4.11 to Snow Leopard?
Should I add more memory when I updaate my iMac from 10.4.11 to Snow Leopard?
Actually, you have a Late 2006 model iMac that can use a Maximum of 3 GB of RAM. See the link below. So you can use a 1 GB and a 2GB modules.
http://support.apple.com/kb/SP28
Message was edited by: Radiation Mac -
Re: Need Help! Dell poweredge T630 cannot reboot after trying to add new memory
It fail to initialize the iDRAC
hi, can any one please advise what should I do for my server? Dell poweredge T630 cannot reboot after trying to add new memory card. Even I remove the newly added memory card and only keep the original one there, it still cannot reboot. Before I try to add the memory card, it works well without any rebooting issues.
Thank you so much for help
steven
This topic first appeared in the Spiceworks Community -
Need Help! Dell poweredge T630 cannot reboot after trying to add new memory card
What errors are you seeing on the screen?
hi, can any one please advise what should I do for my server? Dell poweredge T630 cannot reboot after trying to add new memory card. Even I remove the newly added memory card and only keep the original one there, it still cannot reboot. Before I try to add the memory card, it works well without any rebooting issues.
Thank you so much for help
steven
This topic first appeared in the Spiceworks Community -
How to stop the Add-on running the process
Hi All
I have created an Add-on using C# and it starts and stops correctly. when it is stopped the add-on menu disappear from the main menu, but when I open the Task Manager and check the processes running the add-on process also appears as running. I want to stop this process running when the add on is stopped.
regards
PadmaHi Padma,
all i use in my c# code is
private void SBO_Application_AppEvent( SAPbouiCOM.BoAppEventTypes EventType ) {
switch ( EventType ) {
case SAPbouiCOM.BoAppEventTypes.aet_ShutDown:
System.Windows.Forms.Application.Exit();
break;
case SAPbouiCOM.BoAppEventTypes.aet_CompanyChanged:
break;
case SAPbouiCOM.BoAppEventTypes.aet_LanguageChanged:
break;
and it works...
there's no other place where i Exit my Application, thats why i guess that this should help you
lg David -
How to add more memory on MacBook Air
I installed OS X Yosemite about a week ago and now I only have 2 GB left on my computer, and it says that 1.98 GB are being used right now. I've been clearing it continuously but I can't keep continuing to do this. It's incredibly slow, keeps freezing, etc. If I were to go to the Apple store would they be able to add memory to my computer? How much would it cost, and how much memory would they be able to add? It's an 11 inch Mac Book Air made in mid 2011 if that helps. Also, I've been trying to search how to uninstall OS X Yosemite because it's eating away at my storage but it says you need a copy of the old operating system which I don't have, I'm not to experienced with computers either so I don't want to mess anything up, unless there is a easy/safe way to uninstall it.
Sorry for all the questions, but what exactly am I supposed to erase? All I see in the sidebar of Disk Utilities are Macintosh HD with Macintosh HD underneath it, then my flash drive. If I click on Macintosh HD, the first one, I then clicked on Partition. Here's a picture, what would I do.
-
We have a 32GB IPad 4. how do we add more memory?
We have an Ipad 4 with 32gb. When downloading it tells us our memory is full. How can we add more memory?
I think some needed clarification is in order.
With iDevices, the storage amount ( 16, 32, 64, 128 GBs) is a fixed amount.
The only way to obtain more storage on an iDevice is to sell your current iDevice and purchase a larger storage version.
If you want to store your iPad data (like music, movies and photos) offline and off your iDevice, you can move the data onto wireless WiFi hard drives from Seagate, Western Digital and LaCie. The data can be access by the iDevice over WiFi as these wireless hard drives generate their own WiFi signal and the data from these style drives can stream the data from the drive to the iPad.
Maybe you are looking for
-
IMac keeps losing network connection
My iMac keeps losing the connection to my AirPort very sporadically, but very often. I keep having to open Network Assistant, choose the AirPort and the network, and re-enter the password. I then get a message that my network connection appears to be
-
How do I restore Time Machine backup files (from TC) to an external HD?
I did a full Time Machine backup of my machine to a Time Capsule. All told, around 500GB. The MBP to which I'd like to transfer the files doesn't have a big enough hard drive. However, I do have a 1TB External HD that I could use. Can I use Time Mach
-
Status of suceessfull execution of an action definition
Hi We have configured in CRM 4.0 for Sales Order Transaction that when a new order is created , Order Acknowledgment an email output format has to be automatically triggered to the concerned partner through action profile.In the action profile -- the
-
Dear Experts, I need your favor in solving a problem of XL Reporter. In our one of PC there was Windows XP and Office 2010 which we have upgraded later on to Windows 7 x64 and Office 2010 (same version as it was earlier). After this upgrade the user
-
Reading Advanced Metadata in Smart Collections, not working in Bridge CS6
In Bridge CS5 you could make an Smart collection that were looking for: All metadata > contains > "here we add a value from a metadata only visible from the Advanced tab in File info" But this nolonger works in CS6. Although I can go to File info and