Stopping Quotation Upload to R3

Hi.
I am facing a strange situation wherein, when I create a quotation in CRM it is automatically transferred to R/3. Can you please let me know how to stop this replication to R.3.
I did some debug of the code and saw that the FM CRM_SALESDOCUMENT_FILTER expects the status to be 'B' or 'C'. However the quotation save brings in the status as "A" which makes it to be uploaded.
Is there some setting to be done which will prevent this transfer to r/3?
Thanks in advance.
Regards,
Pradeep

I found the solution to this problem. It was a mistake in customizing. Below is the solution.
For a quotation created in CRM it should not be replicated to OLTP. This is the standard behaviour in CRM. However if this is not working, then you need to check the Item category where the "Relevance for quotation" has to be set to "Initial Quotation" for the respective Item Category.
This will stop the quotations from being sent to OLTP.

Similar Messages

  • My ipad will not power on after update. I have tried connecting to computer which doesn't recognize it. I have pushed top and circle buttons at same time. It had a battery charge before it died.  I tried to stop the upload and am afraid it 'crashed'

    My first genteration ipad will not power on after update. I have tried connecting to the authorized computer which won't recognize it - does not acknowledge a device is plugged in. I have pushed top and circle buttons at same time. It had a battery charge before it died.  I tried to stop the upload midway and am afraid it 'crashed'

    Try putting it into recovery mode.
    Connect iPad to your computer via USB while it's turned on.
    Open iTunes
    Hold the iPad's Sleep/Wake switch (power button on the top of the iPad) down until the "power off" slider appears.
    Power off the iPad completely (wait for the progress spinner to disappear).
    Hold the Sleep/Wake switch AND the Home button down for a full 10 seconds.
    After 10 seconds (the second time you'll see the Apple logo on the screen) release the Sleep/Wake switch while still holding the Home button.
    Continue to hold the Home button for another 10 seconds until the USB connection image appears on the iPad's screen, then release the Home button.
    A pop-up message will appear on iTunes saying it has detected an iPad in recovery mode, you must restore...
    Click on the "Restore" button and the process will begin.

  • TS3989 Photostream stopped automatically uploading

    My iphone stopped automatically uploading photos to my computer photostream on April 7th.  I have turned off photostream on both devices and restarted them again but the photos still do not appear on my computer.
    I know how to get the photos on by other methods like emailing photos and transferring manually by connecting the 'phone and using windows live photo but I would really like the convenience of the automatic upload.
    Has anyone suggestions or solutions from a similar problem?  The Apple help does not offer much on this.
    Thanks

    Photostream does not work backwards. It is not syncing service, but streaming. It will stream from that point of the set up and on, but what you got uploaded now is all that you are going to get. You can verify my information by taking new picture and seeing it stream.

  • How to stop the upload process?

    Hi,
    i had by mistake started the other upload than the required!
    How to stop the current upload process,( generally it takes lot of time to upload the data as data is huge )
    Thanks,
    Ravi

    Hi Ravi Kottur 
    Just follow the things like Sunil suggested check one more just kill the process
    manually and goto RSMO and in the Monitor QM status just Amke it red manually
    for the load which you want to stop and then go to that particular info provider
    Manage and delte the request.. 
    Hope itz clear a little atleast...!
    Thanks & Regards
    R M K
    ***Assigning pointz is the only way of saying thanx in SDN ***
    **Learning the thingz is never end process if u stop it will Be a devil if u continue it will be a divine***
    > Hi,
    >
    > i had by mistake started the other upload than the
    > required!
    >
    > How to stop the current upload process,( generally it
    > takes lot of time to upload the data as data is huge
    > )
    >
    >
    > Thanks,
    > Ravi

  • Error in Quotation upload to R3

    hello experts,
                       we are working on CRM 5.0 & ECC 6. im having problems when uploading a quotation to R3. after the quotation is released, it is saved, then it shows that the doc is being distributed when i try to enter change mode, but in SMW01, it shows a single bdoc in yellow status 'After qRFC step (intermediate state)' . strangely there is no issue while transferring a sales order. can anyone shed some light on this.
    thank you
    deepanshu

    hello,
    all settings are maintained in table SMOFPARSFA, this error seems to have cropped recently, as i was  able to replicate this till this morning. i had been getting an error which said ' R3 adapter is called'. but now the bdoc ismt even showing that.

  • Quotation upload and download

    Dear All
    i want to download all the condition types of quotation from the legacy(SAP) and upload it to SAP with the same price... so how would i write code and what are all the tabels involved for this..
    Regards
    Ravi

    Dear Ravi
    On your comments "download from the legacy(SAP) and upload it to SAP",  not sure what exactly you want.  Assuming that you have generated some quotation for a customer and same has to be maintained for a different customer in VK11.
    If this is what your requirement, then go to SE16, input table KONV and execute.  There give those quotation references in sale order field and execute.  You will get all PR00 values there.  Download it into excel.
    Now go to VK11, input PR00 and sales area and customer code and execute.  There just copy from excel and paste here and save.  This is one method if the records to be uploaded is only to few customers.  Alternatively, if you want to upoload it in bulk, then you can create a recording in LSMW and upload the same.
    thanks
    G. Lakshmipathi

  • Quotation Upload through an interface

    Hi All,
    We are going to upload quotations through an interface program.
    We were able to upload them as a catalog quotation without any problem.
    Then we are going to do a work around where only the approved quotation lines are uploaded again as a Blanket Purchase Agreement(BPA).Therefore the release can be made only for the approved items in the quotation.
    However the problem we are facing is that the QUANTITIES are not uploaded when we upload them as a BPA.
    Does anyone have any idea regarding this.
    Please note I have given here only the basic information.I can provide the specific information if you need.
    Please let me what could have been the reason.
    Thanks in advance,
    MPH

    Please check whether you can this Metalink note. It has an example with exact insert statement.
    370903.1 : How to Create Blanket With One Line Two Price Breaks With Effective Dates by PDOI?
    Thanks
    Supro

  • IPhoto and therefore my whole computer will not turn off because it say's "Photos are being imported to Photo library, Please wait for import to complete." How do I stop the upload?

    I have tried turning off iclowd and other things that would automatically upload photos but that still didnt work. I can not upgrade my computer because it wants to restart the computer, but iphoto stops the shut down process. It says I need to wait for the download to complete. But I can not find anything uploading. please help.  

    It has said this for about a month now and I would just hide iPhoto since I could not close it. I have not needed to turn off my computer until now. But now it is a problem because I can not upgrade my computer

  • My Muse stops ftp uploading

    Please help ... my muse stops uploading between 60%-80%
    I am uploading to GoDaddy.

    Thank you for your prompt reply.
    I am using the built in FTP feature.
    I click to upload only "changed files" and muse still uploads all files, when it does that, it gets stuck when its trying to upload all the images "again". Its stops at about 65-80%.

  • Stop songs uploading to iCloud

    Is there a way to block , short of deleting , songs from uplaoding to iCloud. I have a large amount of songs that I want to keep on my Mac Pro but do not want to load to the cloud (Christmas songs etc) how can I prevent them from uploading and counting against my 25,000 songs?

    Personally I think it's probably an essential feature, anyone who has more than 25,000 tunes in their library, should be able to select which 25,000 get matched.

  • Why has my iphone 4S stopped automatically uploading photos to my laptop when I plug it in?

    My iphone 4S has always automatically uploaded photos when I plug it into my laptop, but now it wont do that and I cannot find it when I look on 'my computer' to manually do it myself. Please help!

    Hello Kendra,
    Thanks for using Apple Support Communities.
    To troubleshoot this error message you receive when trying to charge your iPhone please follow the directions below.
    If you see an alert
    When you plug in your device, you might see one of these alerts:
    “This cable or accessory is not certified and may not work reliably with this iPhone.”
    “This accessory is not supported by this device.”
    If you see one of these alerts, unplug your device try and these steps:
    Look at the connector at the bottom of your device and make sure it’s free of debris, then reconnect the USB cable.
    If you still see an alert, try a different USB cable or charger.
    Get more help
    If your device still doesn't charge or you still see an alert after trying the steps above, contact Apple Support.
    If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
    Take care,
    Alex H.

  • How do I stop unwanted uploading from my library do my smart albuns?

    I made a mistake and mt entire library was sincronized to my smart account on revel . It never ends ... Keep sending fotos and vídeos and I dont´know how to sop this action.

    Hello Rogerio,
    How are you uploading? Are you uploading via Elements or Revel Mac Desktop or other platform?
    Thank you!
    Glenyse

  • Downloading stops when uploading

    Hi,Weird problem here.When I upload a file (in this case a 30Mb file to Google Play Books), all clients on my LAN (wired or wireless) lose connectivity to the internet until the upload is cancelled or completes. I have tried this with different laptops and IE, Firefox and Chrome.I have rebooted the router and the issue remains.If I run a constant Ping, I see time increase from 15ms to 670ms, then eventually it starts dropping and all systems lose connectivity to the Internet. Any ideas as to what the issue could be?   Systems Details Manufacturer SkyModel SR102Firmware Version 2.1q.3595.RDSL Firmware VersionA2pv6F038m.d24j  Router StatisticsSystem Up Time: 09:04:43PortStatusTxPktsRxPktsCollision PktsTx b/sRx b/sUp TimeWANPPPoA3946849702159802360280909:03:24LANUp7169089441408503846212868709:04:43WLANUp8637774928920169441333609:04:20Broadband LinkDownstreamUpstreamConnection Speed20359 kbps1304 kbpsLine Attenuation19.5 dB12.1 dBNoise Margin6.3 dB5.5 dB

    Uploading files that are large can be a little problematic on an ADSL2+ connection because the throughput is low, for a 30MB file it should take only about 30 seconds on your connection, but during that period it'll completely bottleneck the upstream. And this will effect downstream because there is no upstream bandwidth remaining to acknowledge the data packets.
    I noticed this during a period that I uploaded large files to google play, and the only way it was workable was to restrict the upstream bandwidth for google play music, and then the connection was usable during the periods in question. This you're unable to do with google play books, unfortunately.
    This isn't much help to you, but is a fact in relation to your problem, unfortunately. So if you can restrict the upstream bandwidth for some of those applications concerned, then do so and it'll solve the problem.
    If it's taking longer than a second to upload each 1MB of book data approximately then there is a problem with your upstream connection, for other cases try restricting the bandwidth upstream if the application has such a setting.

  • How to stop any upload function to any website,email ....etc

    Hi there,
    I want to secure my environment. The employees are editing docuemnts ,and they are using firefox for surfing the internet too. All what I want to do is to control upload from local hard disk into your browser, by any how... upload pop up, drag and drop ....etc

    A simple question expecting a simple solution, but you have ''opened a can of worms''
    Management is only noticing the insecurity issue & attributing it to Firefox because Firefox is easy to use and presumably highly visible and available.
    ''All what I want to do is to control upload from local hard disk into your browser''
    If the employees have access to the local hard drive with Firefox they probably also have access via the OS anyway. They may have access to a lot more than you realise.
    ''and they are using firefox for surfing the internet too.''
    Again it appears employees have unrestricted internet access.
    No doubt any employee could just install another copy of Firefox, another browser, or just use a browser or complete OS on a memory stick.
    I know I have drifted off the original subject as in your question but it would be worth reviewing security in more depth.
    *Just for starters and as a follow up to the link in the last post see also
    **http://en.wikipedia.org/wiki/User_%28computing%29#User_account
    **http://en.wikipedia.org/wiki/Firewall_%28computing%29
    This forum is not the place to discuss internet or corporate security, nor the place to discuss just what a school-age child may do with a computer! I did however think it worth trying to explain why the original question may not be a Firefox problem.

  • Itunes stops while uploading a song and disconnects device

    Hey there, for the last year I've been having an issue with itunes disconnecting and reconnecting the device it happens while I move any substantial file over to it such as a load of music or a movie or something; it also gives me another error sometimes which is the music file could not be read; I've been searching for months and even had apple replace the phone which I thought might of been the problem, do you guys have any suggestions?

    Howdy cbishop10,
    Welcome to Apple Support Communities.
    From what I gather, there’s an issue with your device disconnecting while syncing with iTunes on your PC. Take a look at the article linked below and try the USB-related troubleshooting suggestions that it provides.
    iTunes: Resolve USB-related alerts - Apple Support
    So long,
    -Jason

Maybe you are looking for