Storage management and apex
Hi,
First of all: Apex is an outstanding product.
I'm wondering : I have installed 1.5, followed by 1.6 and 2.0. I have the intention to install 2.2. But I hesitate.
I've a small computer (20gB) and the volume of data is growing and growing....
What can I do to clean up (without loss of functionality of Apex): remove tablespaces (flows15, flow16, flows2) ?
Any reaction is appreciated.
Kind regards,
Leo
You have very well put your installation of Apex into a tablespace named flowxxx.dbf.
First things first I would drop old users 1.5, & 1.6 if you still have them lying around.
I wouldn't want to tell you to drop a dbf file unless it was not active. I think only you can answer that question. To check what tablespace your current Apex installation is using you can log into the internal workspace from the developer side of Apex and see what tablespace you have associated with it. But depending on how you set things up you could have tables in a different tablespace or indexes if your really tricky, you see where I am going your going to have to do some investigating.
If your getting worreid about the size of the tablespaces, you could do a cold backup of the database, drop a tablespace you think is no longer in use and if worst comes to worst you move all your files back from your cold backup.
Similar Messages
-
I was experimenting with using workspace manager (via DBMS_WM) to version a set of tables. Does everything I want, easily and quickly.
However, when I update versioned objects in APEX, and then look at the HIST table, the user name is APEXPUBLIC_USER.
I understand why this is, but does anyone know of any means of overriding the user saved in the _HIST table, using the APEX user instead.
I had a look at the IOT on the BASE object, but didnt see where it inserts into HIST.
Any help greatly appreciated.
Thanks, RobHi Robert,
some time ago I created a german how to document on Workspace Manager and APEX - you'll find it here.
http://www.oracle.com/webfolder/technetwork/de/community/apex/tipps/wm/index.html
Be careful - in the following text a "workspace" is not an APEX workspace but a DBMS_WM workspace.
The "_HIST table" is not a table but a view. When version-enabling a table Workspace Manager renames the table, adds columns
for the versioning information and creates some views. The most important view is the view which "replaces" the original table. The
"_HIST" view is another view.
Workspace manager also creates an INSTEAD OF trigger which "catches" the DML done on the view (which now has the name
of the original object). That DML is being enriched with User and timestamp information and then placed into the original table
(which now has another name).
The user information is there because Workspace manager allows to grant privileges on "workspaces" to other users. So you ...
* first version-enable a table
* create a new workspace (CHANGES_1)
* do some DML
* grant access on your workspace to the other user say: HUGO
Now you and HUGO can access the workspace CHANGES_1 and review your DML. All other users can only see the
table status before your changes. So as long as you don't access the version enabled object from different database
schemas (i.e. different parsing schemas) and you don't use the DBMS_WM.GRANT.... procedures you don't have to care
about the APEX_PUBLIC_USER information in the HIST view. You can live with the APEXPUBLIC_USER information.
Does that help ...?
Best regards
-Carsten -
Storage Manager and Windows 2012 Deduplication
Does anyone have Storage Manager working with the deduplicated volumes in Windows 2012? It works fine on 2012 itself, but when I attempt to move data to or from a deduplicated volume I get the following error:
182: the requested operation is not supported.
The error seems pretty self explanatory. But I'm really hoping there's a way to get it working. We're planning to do a complete teardown and rebuild of our storage and this could be a deal breaker for whether we use Storage Manager at all to manage user data.
Engine Version: 3.1.0.4
Windows 2012 Standard
Active Directory Schema Not ExtendedOn 4/17/2013 10:46 AM, scunha wrote:
>
> Does anyone have Storage Manager working with the deduplicated volumes
> in Windows 2012? It works fine on 2012 itself, but when I attempt to
> move data to or from a deduplicated volume I get the following error:
>
> 182: the requested operation is not supported.
>
> The error seems pretty self explanatory. But I'm really hoping there's
> a way to get it working. We're planning to do a complete teardown and
> rebuild of our storage and this could be a deal breaker for whether we
> use Storage Manager at all to manage user data.
>
> Engine Version: 3.1.0.4
> Windows 2012 Standard
> Active Directory Schema Not Extended
>
>
scunha,
Could you send an email to [email protected] explaining what
you're doing and providing some details of your deduplication settings?
We'd like to look at this in more detail.
- NFMS Support Team -
Conceptual questions with document management and Apex:
Hello Everyone,
I have reviewed or participated in thread discussions focusing primarily on subject matters concerning text editors, spellcheckers and document printing. The reason for this is due to our client requesting the creation of a basic centralized document management system that will enable users to create, edit and print technical documents in a database centric web-based environment. The caveat is that the client would like the same basic functionality that users get from MS Word. I know about FCKeditor or TinyMCE and their associated spellcheckers. What concerns me is that I have not found a possible plug-in to handle tracking changes, no one wants to re-read a large multiple page document again when all they would rather do is just view the changes. I know there are possible database schemas that might facilitate this type of functionality; I am just hoping it is more of a plug-in function.
So with all that being said my dilemma is how to approach the design of such an application using Apex, if that is possible. Some questions I have are:
1. Do design the application where you have a text field that contains the entire document, which could be as many as 25 or more pages?
2. Or do you break down the document in to multiple text fields and then assimilate them in to a single multi page document when printing?
3. Would you store the document data using XML under condition 1, 2, both or not at all?
4. What types of data tables might exist, such as tables for document templates, work-in-process and final documents or something else?
I know there are a lot of other concepts/questions to consider and a large part of the design approach would be based on client requirements. My goal here is to gather different basic conceptual approaches, from forum members, in order to help facilitate a starting point for the project.
By the way I have seen on the Apex Latest Forum Poll, for quite sometime, where Document Management is an application that people would like to see developed. Can anyone from the Apex-team tell me if it is in the works and if so, when?
Thanks, in advance, for any suggestions.
KyleHey Chet,
Thanks for the response; actually I had visited the sample package apps. site awhile back and did not realize more had been added. My problem is that I use Apex 2.1 and not 2.2, so unless there is a way to load the package apps. to the Oracle hosted site, I won't be able to review there design. It would be nice if Oracle tied these package apps. to their demonstration applications sample downloads function in Apex.
As for storing each line of the document in a single record, this was thought of as an initial approach. A concern by the team was how to program the logic to identify specific changed text in say a 5 sentence paragraph and how large the table would become if recording it line by line.
It is still a good approach to consider and we appreciate the input.
Thanks
Kyle -
Oracle's 10gR2 Automated Storage Management implementation on CentOS 4.1
Actually there are several nice articles on Oracle Technical Network
devoted to the same topic. Whats new may be said ?
The target of message is to highlight the optimal sequence of steps
required to bring Oracle10g (10.2.0.1) ASM-database up on CentOS4.1 , placing ASM instance and serviced databases in different Oracle Homes.
Oracleasm library install is done immediately after creating "oracle"
linux account and "dba" group to be ready for ASM Instance creating during
the first Installer run supposed to build it. ASM instance for disks and disks
group management is created the first by Installer along with the disks group
for database supposed to be built during the second run of Installer and to be
placed into recently created disks group.
I. Oracle 10gR2 ASM and ASMLib 2.0 I/O.
1.Install CentOS 4.1
2.Run as root:
# groupadd dba # group of users to be granted SYSDBA system privilege
# groupadd oinstall # group owner of Oracle files
# useradd -c "Oracle software owner" -g oinstall -G dba oracle
# passwd oracle
# mkdir -p /u01/app/oracle
# chown -R oracle.oinstall /u01
# mkdir -p /u02/oradata/wtfdata
# chown -R oracle.oinstall /u02
OTN instruction:-
Before installing Automatic Storage Management, it is recommended that you install the optional add-on Automatic Storage Management support library, ASMLib. ASMLib is an application program interface (API) Oracle that is aimed at simplifying the interface between the operating system and the database, and to exploit the capabilities and strengths of storage arrays provided by different vendors.ASMLib provides an alternative interface for the Automatic Storage Management-enabled kernel to discover and access block devices. It provides storage and operating system vendors the opportunity to supply extended storage-related features. These features provide benefits such as improved performance and greater data integrity.
OTN instruction ends.
3.To install ASMLIB 2.0 run as root:-
# rpm -Uvh oracleasm-2.6.9-11.ELsmp-2.0.0-1.i686.rpm \
oracleasmlib-2.0.0-1.i386.rpm \
oracleasm-support-2.0.0-1.i386.rpm
Now you get /etc/init.d/oracleasm ready to go.
Configuring the Oracle ASM library driver:-
# /etc/init.d/oracleasm configure
Default user to own the driver interface [oracle]: oracle
Default group to own the driver interface [dba]: dba
Start Oracle ASM library driver on boot (y/n) [y]: y
Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: [ OK ]
Scanning system for ASM disks: [ OK ]
# /etc/init.d/oracleasm enable
Create ASM disks as desired utilizing command:
# /etc/init.d/oracleasm createdisk VLM0X /dev/sdx
Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login, /etc/profile.
and oracle's shell environment as advised in [1].
Login as oracle:-
$ cd /tmp/database
$./runInstaller
OTN instructions:-
Its recommended that you install Automatic Storage Management in its own Oracle home, regardless of whether you plan to only have one or multiple database instances.Installing Automatic Storage Management in its own Oracle home helps ensure higher availability and manageability.
With separate Oracle homes, you can upgrade Automatic Storage Management and databases independently, and you can remove database software without impacting the Automatic Storage Management instance. Ensure that the Automatic Storage Management version is the same or later than the Oracle Database version.If an Automatic Storage Management installation does not already exist and you select the Oracle Universal Installer option to install and configure Automatic Storage Management only, then Oracle Universal Installer installs Automatic Storage Management in its own Oracle home.
OTN instruction ends.
Select " Advanced installation" and
create ASM instance in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1
Create disk group during this run .
Exit installer.
$ ./runInstaller
Select " Advanced installation" and create new ASM-database placed into existing disk's group
in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_2 .
Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
Next:-
$ sqlplus /nolog
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1218968 bytes
Variable Size 88082024 bytes
Database Buffers 188743680 bytes
Redo Buffers 7168000 bytes
Database mounted.
SQL> alter database archivelog;
Database altered.
SQL> alter database MastDB flashback on;
Database altered.
SQL> alter database open;
Database altered.
Open Enterpise Manager console.(Enterprise Manager 10g Database Control URL
http://ServerCentOS41:1158/em). Create new disk's group for flashback recovery area and modify corresponding value on Recovery Settings page of EM.
System startup in this case should look like:-
[oracle@ServerCentOS41 ~]$ ./lsnrstart
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:41
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 30-AUG-2005 17:57:42
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:42
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_2/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1522)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 30-AUG-2005 17:57:42
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@ServerCentOS41 ~]$ dbstart
Processing ASM instance "+ASM": log file /u01/app/oracle/product/10.2.0/db_1/startup.log
Processing Database instance "MastDB": log file /u01/app/oracle/product/10.2.0/db_2/startup.log
[oracle@ServerCentOS41 ~]$ emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://ServerCentOS41:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ........................ started.
Logs are generated in directory /u01/app/oracle/oracle/product/10.2.0/db_2/ServerCentOS41_MastDB/sysman/log
Install described above was done with different Oracle Homes
for ASM instance and ASM-database.
To put ASM instance and ASM-database in same Oracle Home.
Start runInstaller just once to build all stuff at a time.
Login as oracle:-
$ cd /tmp/database
$./runInstaller
Select " Advanced option" and install "Software only"
in ORACLE_HOME - /u01/app/oracle/oracle/product/10.2.0/db_1.
Modify oracle's .bash_profile:-
export ORACLE_HOME and new PATH.
Source new .bash_profile:-
$. ~oracle/.bash_profile
$dbca
During this run the request to start CRS daemons by root will come up.
# $ORACLE_HOME/bin/localconfig add
ASM instance , needed disk's groups and ASM-database itself will be created.
Then perform listener and local TNS names configuration.
$netca
II. Oracle 10gR2 ASM and Standard Linux I/O.
This method creates Oracle database files on raw character devices managed by ASM
using standard Linux I/O system calls.It requires to create RAW devices for all
disk partitions used by ASM.
1.Install CentOS 4.1
2.Run as root:
# groupadd dba # group of users to be granted SYSDBA system privilege
# groupadd oinstall # group owner of Oracle files
# useradd -c "Oracle software owner" -g oinstall -G dba oracle
# passwd oracle
# mkdir -p /u01/app/oracle
# chown -R oracle.oinstall /u01
# mkdir -p /u02/oradata/data
# chown -R oracle.oinstall /u02
Just as an example create 4 partitions:
/dev/hda6,/dev/hdc6 5 GB each one
/dev/hda7,/dev/hdc7 3 GB each one
Create raw devices modifying file /etc/sysconfig/rawdevices as follows:
/dev/raw/raw1 /dev/hda6
/dev/raw/raw2 /dev/hdc6
/dev/raw/raw3 /dev/hda7
/dev/raw/raw4 /dev/hdc7
Put in /etc/rc.d/rc.local
chown oracle:dba /dev/raw/raw*
chmod 660 /dev/raw/raw*
I was experiencing problems with loosing "oracle:dba" permissions after Linux
reboot. Oracle's raw device came up with "root:disk" ownership after reboot.
Restart Linux
Run as root:-
# service rawdevices restart
Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login,
/etc/profile and oracle's shell environment as advised in [1].
Login as oracle:-
$ cd /tmp/database
$./runInstaller
Select " Advanced installation" and
create ASM instance in ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/asm
During this run create diskgroup RAWDATA1 with normal redundancy
mirroring /dev/raw/raw1 and /dev/raw/raw2.
You should be fine with discovering raw devices if permissions are in place (oracle:dba)
Exit installer.
Export ORACLE_HOME for ASM instance and corresponding PATH.
Then run "dbca" to create diskgroup RAWDATA2 with
normal redundancy mirroring /dev/raw/raw3 and /dev/raw/raw4
$ ./runInstaller
Select " Advanced installation" and create new ASM-database placed RAWDATA1 diskgroup
in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1.
Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
Next:-
$ sqlplus /nolog
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1218968 bytes
Variable Size 88082024 bytes
Database Buffers 188743680 bytes
Redo Buffers 7168000 bytes
Database mounted.
SQL> alter database archivelog;
Database altered.
SQL> alter database rawdbs flashback on;
Database altered.
SQL> alter database open;
Database altered.
Open Enterpise Manager console.(Enterprise Manager 10g Database Control
URL http://ServerCentOS41:1158/em). Put flashback recovery area in RAWDATA2
modifying corresponding value on Recovery Settings page of EM.
References.
1.www.puschitz.com/InstallingOracle10g.shtml[oracle@casa database]$ df -k
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda2 70557084 8674712 58298272 13% /
none 387852 0 387852 0% /dev/shm
/dev/hdc 656964 656964 0 100% /media/cdrecorder1So, you have 58298272 bytes available, which is 55MB, and the installer asks for 60 ;) You should probably use df -h instead of df -k...
PS where are you planning to install to with only 55MB available anyway?
~Jer -
Oracle 10gR2 Automated Storage Management implementation on CentOS 4.1
Actually there are several nice articles on Oracle Technical Network devoted to the same topic. Whats new may be said ?
The target of this message is to highlight the optimal sequence of steps required to bring Oracle10g (10.2.0.1) ASM-database up on CentOS4.1 , placing ASM instance and serviced databases in different Oracle Homes.Oracleasm library install is done immediately after creating "oracle" linux account and "dba" group to be ready for ASM Instance creating during the first Installer run supposed to build it. ASM instance for disks and disks group management is created the first by Installer along with the disks group for database supposed to be built during the second run of Installer and to be placed into recently created disks group.
I. Oracle 10gR2 ASM and ASMLib 2.0 I/O.
1.Install CentOS 4.1
2.Run as root:
# groupadd dba # group of users to be granted SYSDBA system privilege
# groupadd oinstall # group owner of Oracle files
# useradd -c "Oracle software owner" -g oinstall -G dba oracle
# passwd oracle
# mkdir -p /u01/app/oracle
# chown -R oracle.oinstall /u01
# mkdir -p /u02/oradata/wtfdata
# chown -R oracle.oinstall /u02
OTN instruction:-
Before installing Automatic Storage Management, it is recommended that you install the optional add-on Automatic Storage Management support library, ASMLib. ASMLib is an application program interface (API) Oracle that is aimed at simplifying the interface between the operating system and the database, and to exploit the capabilities and strengths of storage arrays provided by different vendors ASMLib provides an alternative interface for the Automatic Storage Management-enabled kernel to discover and access block devices. It provides storage and operating system vendors the opportunity to supply extended storage-related features. These features provide benefits such as improved performance and greater data integrity.
OTN instruction ends.
3.To install ASMLIB 2.0 run as root:-
# rpm -Uvh oracleasm-2.6.9-11.ELsmp-2.0.0-1.i686.rpm \
oracleasmlib-2.0.0-1.i386.rpm \
oracleasm-support-2.0.0-1.i386.rpm
Now you get /etc/init.d/oracleasm ready to go.
Configuring the Oracle ASM library driver:-
# /etc/init.d/oracleasm configure
Default user to own the driver interface [oracle]: oracle
Default group to own the driver interface [dba]: dba
Start Oracle ASM library driver on boot (y/n) [y]: y
Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: [ OK ]
Scanning system for ASM disks: [ OK ]
# /etc/init.d/oracleasm enable
Create ASM disks as desired utilizing command:
# /etc/init.d/oracleasm createdisk VLM0X /dev/sdx
Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login, /etc/profile.
and oracle's shell environment as advised in [1].
Login as oracle:-
$ cd /tmp/database
$./runInstaller
OTN instructions:-
Its recommended that you install Automatic Storage Management in its own Oracle home, regardless of whether you plan to only have one or multiple database instances.Installing Automatic Storage Management in its own Oracle home helps ensure higher availability and manageability.With separate Oracle homes, you can upgrade Automatic Storage Management and databases independently, and you can remove database software without impacting the Automatic Storage Management instance. Ensure that the Automatic Storage Management version is the same or later than the Oracle Database version.If an Automatic Storage Management installation does not already exist and you select the Oracle Universal Installer option to install and configure Automatic Storage Management only, then Oracle Universal Installer installs Automatic Storage Management in its own Oracle home.
OTN instruction ends.
Select " Advanced installation" and
create ASM instance in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1
Create disk group during this run .
Exit installer.
$ ./runInstaller
Select " Advanced installation" and create new ASM-database placed into existing disk's group in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_2 .
Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
Next:-
$ sqlplus /nolog
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1218968 bytes
Variable Size 88082024 bytes
Database Buffers 188743680 bytes
Redo Buffers 7168000 bytes
Database mounted.
SQL> alter database archivelog;
Database altered.
SQL> alter database MastDB flashback on;
Database altered.
SQL> alter database open;
Database altered.
Open Enterpise Manager console.(Enterprise Manager 10g Database Control URL
http://ServerCentOS41:1158/em). Create new disk's group for flashback recovery area and modify corresponding value on Recovery Settings page of EM.
System startup in this case should look like:-
[oracle@ServerCentOS41 ~]$ ./lsnrstart
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:41
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 30-AUG-2005 17:57:42
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:42
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_2/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1522)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 30-AUG-2005 17:57:42
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@ServerCentOS41 ~]$ dbstart
Processing ASM instance "+ASM": log file /u01/app/oracle/product/10.2.0/db_1/startup.log
Processing Database instance "MastDB": log file /u01/app/oracle/product/10.2.0/db_2/startup.log
[oracle@ServerCentOS41 ~]$ emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://ServerCentOS41:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ........................ started.
Logs are generated in directory /u01/app/oracle/oracle/product/10.2.0/db_2/ServerCentOS41_MastDB/sysman/log
Install described above was done with different Oracle Homes
for ASM instance and ASM-database.
To put ASM instance and ASM-database in same Oracle Home.
Start runInstaller just once to build all stuff at a time.
Login as oracle:-
$ cd /tmp/database
$./runInstaller
Select " Advanced option" and install "Software only"
in ORACLE_HOME - /u01/app/oracle/oracle/product/10.2.0/db_1.
Modify oracle's .bash_profile:-
export ORACLE_HOME and new PATH.
Source new .bash_profile:-
$. ~oracle/.bash_profile
$dbca
During this run the request to start CRS daemons by root will come up.
# $ORACLE_HOME/bin/localconfig add
ASM instance , needed disk's groups and ASM-database itself will be created.
Then perform listener and local TNS names configuration.
$netca
II. Oracle 10gR2 ASM and Standard Linux I/O.
This method creates Oracle database files on raw character devices managed by ASM using standard Linux I/O system calls.It requires to create RAW devices for all disk partitions used by ASM.
1.Install CentOS 4.1
2.Run as root:
# groupadd dba # group of users to be granted SYSDBA system privilege
# groupadd oinstall # group owner of Oracle files
# useradd -c "Oracle software owner" -g oinstall -G dba oracle
# passwd oracle
# mkdir -p /u01/app/oracle
# chown -R oracle.oinstall /u01
# mkdir -p /u02/oradata/data
# chown -R oracle.oinstall /u02
Just as an example create 4 partitions:
/dev/hda6,/dev/hdc6 5 GB each one
/dev/hda7,/dev/hdc7 3 GB each one
Create raw devices modifying file /etc/sysconfig/rawdevices as follows:
/dev/raw/raw1 /dev/hda6
/dev/raw/raw2 /dev/hdc6
/dev/raw/raw3 /dev/hda7
/dev/raw/raw4 /dev/hdc7
Put in /etc/rc.d/rc.local
chown oracle:dba /dev/raw/raw*
chmod 660 /dev/raw/raw*
I was experiencing problems with loosing "oracle:dba" permissions after Linux
reboot. Oracle's raw device came up with "root:disk" ownership after reboot.
Restart Linux
Run as root:-
# service rawdevices restart
Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login,
/etc/profile and oracle's shell environment as advised in [1].
Login as oracle:-
$ cd /tmp/database
$./runInstaller
Select " Advanced installation" and
create ASM instance in ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/asm
During this run create diskgroup RAWDATA1 with normal redundancy
mirroring /dev/raw/raw1 and /dev/raw/raw2.
You should be fine with discovering raw devices if permissions are in place (oracle:dba)
Exit installer.
Export ORACLE_HOME for ASM instance and corresponding PATH.
Then run "dbca" to create diskgroup RAWDATA2 with
normal redundancy mirroring /dev/raw/raw3 and /dev/raw/raw4
$ ./runInstaller
Select " Advanced installation" and create new ASM-database placed RAWDATA1 diskgroup
in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1.
Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
Next:-
$ sqlplus /nolog
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1218968 bytes
Variable Size 88082024 bytes
Database Buffers 188743680 bytes
Redo Buffers 7168000 bytes
Database mounted.
SQL> alter database archivelog;
Database altered.
SQL> alter database rawdbs flashback on;
Database altered.
SQL> alter database open;
Database altered.
Open Enterpise Manager console.(Enterprise Manager 10g Database Control
URL http://ServerCentOS41:1158/em). Put flashback recovery area in RAWDATA2
modifying corresponding value on Recovery Settings page of EM.
References.
1.www.puschitz.com/InstallingOracle10g.shtml
Message was edited by:
[email protected]Actually there are several nice articles on Oracle Technical Network devoted to the same topic. Whats new may be said ?
The target of this message is to highlight the optimal sequence of steps required to bring Oracle10g (10.2.0.1) ASM-database up on CentOS4.1 , placing ASM instance and serviced databases in different Oracle Homes.Oracleasm library install is done immediately after creating "oracle" linux account and "dba" group to be ready for ASM Instance creating during the first Installer run supposed to build it. ASM instance for disks and disks group management is created the first by Installer along with the disks group for database supposed to be built during the second run of Installer and to be placed into recently created disks group.
I. Oracle 10gR2 ASM and ASMLib 2.0 I/O.
1.Install CentOS 4.1
2.Run as root:
# groupadd dba # group of users to be granted SYSDBA system privilege
# groupadd oinstall # group owner of Oracle files
# useradd -c "Oracle software owner" -g oinstall -G dba oracle
# passwd oracle
# mkdir -p /u01/app/oracle
# chown -R oracle.oinstall /u01
# mkdir -p /u02/oradata/wtfdata
# chown -R oracle.oinstall /u02
OTN instruction:-
Before installing Automatic Storage Management, it is recommended that you install the optional add-on Automatic Storage Management support library, ASMLib. ASMLib is an application program interface (API) Oracle that is aimed at simplifying the interface between the operating system and the database, and to exploit the capabilities and strengths of storage arrays provided by different vendors ASMLib provides an alternative interface for the Automatic Storage Management-enabled kernel to discover and access block devices. It provides storage and operating system vendors the opportunity to supply extended storage-related features. These features provide benefits such as improved performance and greater data integrity.
OTN instruction ends.
3.To install ASMLIB 2.0 run as root:-
# rpm -Uvh oracleasm-2.6.9-11.ELsmp-2.0.0-1.i686.rpm \
oracleasmlib-2.0.0-1.i386.rpm \
oracleasm-support-2.0.0-1.i386.rpm
Now you get /etc/init.d/oracleasm ready to go.
Configuring the Oracle ASM library driver:-
# /etc/init.d/oracleasm configure
Default user to own the driver interface [oracle]: oracle
Default group to own the driver interface [dba]: dba
Start Oracle ASM library driver on boot (y/n) [y]: y
Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: [ OK ]
Scanning system for ASM disks: [ OK ]
# /etc/init.d/oracleasm enable
Create ASM disks as desired utilizing command:
# /etc/init.d/oracleasm createdisk VLM0X /dev/sdx
Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login, /etc/profile.
and oracle's shell environment as advised in [1].
Login as oracle:-
$ cd /tmp/database
$./runInstaller
OTN instructions:-
Its recommended that you install Automatic Storage Management in its own Oracle home, regardless of whether you plan to only have one or multiple database instances.Installing Automatic Storage Management in its own Oracle home helps ensure higher availability and manageability.With separate Oracle homes, you can upgrade Automatic Storage Management and databases independently, and you can remove database software without impacting the Automatic Storage Management instance. Ensure that the Automatic Storage Management version is the same or later than the Oracle Database version.If an Automatic Storage Management installation does not already exist and you select the Oracle Universal Installer option to install and configure Automatic Storage Management only, then Oracle Universal Installer installs Automatic Storage Management in its own Oracle home.
OTN instruction ends.
Select " Advanced installation" and
create ASM instance in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1
Create disk group during this run .
Exit installer.
$ ./runInstaller
Select " Advanced installation" and create new ASM-database placed into existing disk's group in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_2 .
Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
Next:-
$ sqlplus /nolog
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1218968 bytes
Variable Size 88082024 bytes
Database Buffers 188743680 bytes
Redo Buffers 7168000 bytes
Database mounted.
SQL> alter database archivelog;
Database altered.
SQL> alter database MastDB flashback on;
Database altered.
SQL> alter database open;
Database altered.
Open Enterpise Manager console.(Enterprise Manager 10g Database Control URL
http://ServerCentOS41:1158/em). Create new disk's group for flashback recovery area and modify corresponding value on Recovery Settings page of EM.
System startup in this case should look like:-
[oracle@ServerCentOS41 ~]$ ./lsnrstart
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:41
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 30-AUG-2005 17:57:42
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:42
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_2/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1522)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 30-AUG-2005 17:57:42
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@ServerCentOS41 ~]$ dbstart
Processing ASM instance "+ASM": log file /u01/app/oracle/product/10.2.0/db_1/startup.log
Processing Database instance "MastDB": log file /u01/app/oracle/product/10.2.0/db_2/startup.log
[oracle@ServerCentOS41 ~]$ emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://ServerCentOS41:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ........................ started.
Logs are generated in directory /u01/app/oracle/oracle/product/10.2.0/db_2/ServerCentOS41_MastDB/sysman/log
Install described above was done with different Oracle Homes
for ASM instance and ASM-database.
To put ASM instance and ASM-database in same Oracle Home.
Start runInstaller just once to build all stuff at a time.
Login as oracle:-
$ cd /tmp/database
$./runInstaller
Select " Advanced option" and install "Software only"
in ORACLE_HOME - /u01/app/oracle/oracle/product/10.2.0/db_1.
Modify oracle's .bash_profile:-
export ORACLE_HOME and new PATH.
Source new .bash_profile:-
$. ~oracle/.bash_profile
$dbca
During this run the request to start CRS daemons by root will come up.
# $ORACLE_HOME/bin/localconfig add
ASM instance , needed disk's groups and ASM-database itself will be created.
Then perform listener and local TNS names configuration.
$netca
II. Oracle 10gR2 ASM and Standard Linux I/O.
This method creates Oracle database files on raw character devices managed by ASM using standard Linux I/O system calls.It requires to create RAW devices for all disk partitions used by ASM.
1.Install CentOS 4.1
2.Run as root:
# groupadd dba # group of users to be granted SYSDBA system privilege
# groupadd oinstall # group owner of Oracle files
# useradd -c "Oracle software owner" -g oinstall -G dba oracle
# passwd oracle
# mkdir -p /u01/app/oracle
# chown -R oracle.oinstall /u01
# mkdir -p /u02/oradata/data
# chown -R oracle.oinstall /u02
Just as an example create 4 partitions:
/dev/hda6,/dev/hdc6 5 GB each one
/dev/hda7,/dev/hdc7 3 GB each one
Create raw devices modifying file /etc/sysconfig/rawdevices as follows:
/dev/raw/raw1 /dev/hda6
/dev/raw/raw2 /dev/hdc6
/dev/raw/raw3 /dev/hda7
/dev/raw/raw4 /dev/hdc7
Put in /etc/rc.d/rc.local
chown oracle:dba /dev/raw/raw*
chmod 660 /dev/raw/raw*
I was experiencing problems with loosing "oracle:dba" permissions after Linux
reboot. Oracle's raw device came up with "root:disk" ownership after reboot.
Restart Linux
Run as root:-
# service rawdevices restart
Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login,
/etc/profile and oracle's shell environment as advised in [1].
Login as oracle:-
$ cd /tmp/database
$./runInstaller
Select " Advanced installation" and
create ASM instance in ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/asm
During this run create diskgroup RAWDATA1 with normal redundancy
mirroring /dev/raw/raw1 and /dev/raw/raw2.
You should be fine with discovering raw devices if permissions are in place (oracle:dba)
Exit installer.
Export ORACLE_HOME for ASM instance and corresponding PATH.
Then run "dbca" to create diskgroup RAWDATA2 with
normal redundancy mirroring /dev/raw/raw3 and /dev/raw/raw4
$ ./runInstaller
Select " Advanced installation" and create new ASM-database placed RAWDATA1 diskgroup
in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1.
Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
Next:-
$ sqlplus /nolog
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1218968 bytes
Variable Size 88082024 bytes
Database Buffers 188743680 bytes
Redo Buffers 7168000 bytes
Database mounted.
SQL> alter database archivelog;
Database altered.
SQL> alter database rawdbs flashback on;
Database altered.
SQL> alter database open;
Database altered.
Open Enterpise Manager console.(Enterprise Manager 10g Database Control
URL http://ServerCentOS41:1158/em). Put flashback recovery area in RAWDATA2
modifying corresponding value on Recovery Settings page of EM.
References.
1.www.puschitz.com/InstallingOracle10g.shtml
Message was edited by:
[email protected] -
Storage Manager on NT locks up against 8.0.5 on Linux
I have created a linux oracle server that seems to be
working quite well. I have had little trouble managing the server
from the UNIX side. I am using Net8 to connect from my NT
machine that I do most of my work from. I have installed the
Oracle Client for NT on my machine and can connect to my Linux
Server in the standard ways. However, every now and then when
I,m using one of the Oracle management tools the tool freezes and
locks up. Often I will have to go into Server Manager on the
linux side and kill the user session to get the server back to
normal. One place it seems to happen with regularity is when
using the Storage Manager and browsing through the tablespaces.
The first tablespace I look at usually pulls up but the next one
just hangs Storage Manager and I have to end the task.
Has anyone else experienced similar behavior?
nullMatt Miller (guest) wrote:
: I have created a linux oracle server that seems to be
: working quite well. I have had little trouble managing the
server
: from the UNIX side. I am using Net8 to connect from my NT
: machine that I do most of my work from. I have installed the
: Oracle Client for NT on my machine and can connect to my Linux
: Server in the standard ways. However, every now and then when
: I,m using one of the Oracle management tools the tool freezes
and
: locks up. Often I will have to go into Server Manager on the
: linux side and kill the user session to get the server back to
: normal. One place it seems to happen with regularity is when
: using the Storage Manager and browsing through the tablespaces.
: The first tablespace I look at usually pulls up but the next
one
: just hangs Storage Manager and I have to end the task.
: Has anyone else experienced similar behavior?
I seem to have fixed the problem by creating a new temporary
tablespace on a separate harddrive and deleting the old one.
Go figure.
null -
Problems with integrating YUI Layout Manager with APEX
Hello,
I have a problem about the YUI Layout Manager and APEX.
This is the link to the Layout Manager, which I want to integrate:
http://developer.yahoo.com/yui/layout/
I tried to integrate it and in Firefox everything is fine!
But with Internet Explorer the page is damaged.
Look at the sample on apex.oracle.com:
http://apex.oracle.com/pls/otn/f?p=53179:1
Can anybody help me with this issue?
I think this couldn`t be a big problem, becaus in FF it works correctly, but I don`t get the point to run that in IE7.
Thank you,
TimHello,
now I put some color in it, but it does not help me pointing out the problem.
The Login for my Account is:
My Workspace is: EHRIC02
Username: [email protected]
Password: ehric02
Is there anybody who have implementet the YUI Layout Manager with APEX? Perhaps that isn`t possible with APEX?
I know that John Scott played with YUI a few times, has he tried out the Layout Manager?
Thank you,
Tim -
Legato Storage Manager problem
Hi,
I do very well backup of a database on tapes using Legato Storage Manager and RMAN. I use 4 tapes on 40 G. Tha backup use 35G from each tape. In Legato Storage Manager at the Media, then Devices, then Media Type is selected dlt. I can select dlt or dlt7000 or other option.
I want to use few tapes so I want to do backup using tapes HP DLT 80G. The backup bahaves like in the previous case, after 35 G of backup requests a new tape even the tape has 80 G.
Do you know what I need to select at the option Media Type in Legato Storage Manager ? or how to do to use tapes of 80 G?
Thank you,
MihaelaStephen,
You have two options:
1) If Legato is not installed on you machine,
then Oracle installer install LSM - limited version of Legato Networker. It is limited to 4 channels, requires tape drive to be directly connected to your machine, does not support autochangers (jukeboxes), etc.
It is included in Oracle installation,
you don't need a separate license.
2) You can buy 2 products from Legato - Legato Networker and Legato Module for Oracle. Install Legato client first, then Oracle - Oracle installer detects that legato is already installed and does not attempt to install it again. Then link Oracle and Legato.
For pricing contact Legato www.legato.com
Regards,
Sev
[email protected]
null -
my app store wont let me update any apps when i click the update all button it doesnt do anything and eventually says i need to manage my storage, i have 4.4 gigs left and all of my icloud storage left and i just deleted 5 app hoping it would make room but it didnt work. is there something that happened to itouch 3rd gen during th ios5 update or something? please let me know if there is anything i can do
it says something about storage management
Try these support articles...
iCloud: Managing your iCloud storage
iCloud: Purchasing iCloud Storage and Billing -
Intel Matrix Storage Manager disables Windows Update and Windows Validation on Windows 7 64-bit
I have a Lenovo ThinkPad R61 8918CTO on which I did a clean install of Windows 7 Ultimate SP1 (64-bit) on a new Seagate Momentus XT 750GB drive. The installation was trouble-free, as were all of the post-install Windows Updates.
Then I installed ThinkVantage System Update 4.03 and used it to install most of the available Lenovo updates. Big mistake. I'll spare you a detailed account of the hours I wasted troubleshooting, rolling back to previous restore points, and doing more troubleshooting, but it turns out that installing Intel Matrix Storage Manager driver v. 8.9.2.1002 caused Windows Update and Windows Validation to fail.
Symptoms: Windows Update control panel can't check for updates and reports that the Windows Update service isn't running when it actually is. Online Windows Validation fails and the standalone Windows Validation utility won't install. Microsoft programs that require a validated copy of Windows (e.g., Microsoft Security Essentials) won't install.
Solution: Roll back the driver for the relevant SATA controller to the previous driver.
I've reinstalled ThinkVantage System Update 4.03 and hidden the proposed Intel Matrix Storage Manager update; since then, I've used it to complete my Lenovo updates without issue.
I hope this post will help other people with this problem find the solution a lot faster than it took me!This happened after installing a new advanced format drive with 4k-byte sectors, I'd guess. If the storage driver doesn't report the physical sector size to Windows, update fails.
I just ran across this myself (again) putting Win 7 on a T400.
I don't know why this is still going on. It may be that the update lists for older machines still have pre-AF-drive drivers listed.
FYI, another fix is going to the Intel site and installing the latest Matrix Storage Manager AHCI driver. This may be more desirable than rolling back to an older driver in some cases.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
P55-CD53, how to install SATA AHCI drivers and Matrix Storage Manager?
Please excuse my noobness as this is for my first PC build and much of it is Greek to me, but could someone please inform/educate me as to what the following drivers (link) are for and which need to be installed after a fresh installation of Windows 7 Pro x64? Do I need to install all of them because some of these appear to be redundant, just from different manufacturers, or am I mistaken? I have a single 500GB HDD but will probably add more down the road.
JMicron JMB36x IDE Drivers (including floppy driver)
Description XP/Vista/Win7 Ver: 17.49.04.WHQL
Update Date 2009-07-27
Your System OS XP/Vista/Win7 32/64bit
(3989KB)
Intel P55 AHCI / RAID Drivers
Description Ver: 8.9.0.1023
Update Date 2009-07-24
Your System OS XP/Vista/Win7 32/64bit
(23048KB)
Intel P55 SATA RAID Driver (For floppy driver)
Description Intel P55 SATA RAID driver
1. Extract the file and Copy all files to the floppy.
2. Press F6 to install driver through the floppy when booting and loading RAID function.
Update Date 2009-07-24
Your System OS XP/Vista/Win7 32/64bit
(443KB)
JMicron IDE/SATA RAID Drivers (with AP)
Description XP/Vista Driver Version: 1.17.43.05
For floppy install:
Please copy all the directories and files in the "floppy" folder to the root directory of a floppy disk to create a pre-install disk for Win2K/WinXP/Win2003/WinXP 64bits/Win2003 64bits.
For example,
A:\amd64
\x32
txtsetup.oem
To enhance IDE transfer speed, we strongly recommend you install JMicron IDE/SATA Driver.
Update Date 2009-02-23
Your System OS Windows Vista 32/64bit
(4032KB)
Windows XP 32bit
(4032KB)
Intel TPM Device Driver
Description Intel Trusted Platform chipset driver
XP/Vista/Win7: 2.00.0000.00
Update Date 2007-11-02
Your System OS Vista/Win7 32/64bit
(23KB)
Windows XP 32bit
(23KB)
On a side note, I have already flashed the BIOS to 1.4 using the Forum USB Flashing Tool (thanks!).Thanks.
After booting from the Windows 7 disc, I selected Repair Windows, Load Drivers. Which specific controllers do I need to install for the P55-CD53 MB since there are multiple controllers listed for each of the four SATA compressed files?
Considering the multiple files and multiple controllers, is there no one out there with a P55-CD53 that has AHCI mode enabled that can give dumbed down instructions on how to do so?
The manual states "Select the appropriate RAID controller and press enter." Well... which one is the appropriate controller? Am I suppose to load the driver for all the AHCI controllers if that's even possible?
For the Intel P55 AHCI / RAID Drivers compressed file, these are the controllers available within F6flpy64\iaAHCI.inf:
Intel(R) ESB2 SATA AHCI Controller
Intel(R) ICH 10D/DO SATA AHCI Controller
Intel(R) ICH10R SATA AHCI Controller
Intel(R) ICH7M/MDH SATA AHCI Controller
Intel(R) ICH7R/DH SATA AHCI Controller
Intel(R) ICH8M-E/M SATA AHCI Controller
Intel(R) ICH8R/DH/DO SATA AHCI Controller
Intel(R) ICH9M-E/M SATA AHCI Controller
Intel(R) ICH9R/DO/DH SATA AHCI Controller
Intel(R) PCH SATA AHCI Controller
Intel(R) PCHM SATA AHCI Controller 4 Port
Intel(R) PCHM SATA AHCI Controller 6 Port
Also, regarding the dual BIOS controls for SATA/IDE/RAID settings previously mentioned, I believe SATA ports 1-6 are controlled via Intel and 7,8 are controlled via Jmicron. Considering my HDD is currently plugged into SATA 1, Jmicron probably isn't necessary for the moment.
Edit:
Turns out that none of the drivers for the controllers listed in iaAHCI.inf could be installed. However, I went ahead and installed the drivers listed for all the controllers in iaStor.inf. I reinstalled Windows 7 to get rid of the BSOD. I then installed the chipset drivers and Intel Matrix Storage Manager. -
Install Real Application Clusters (RAC) and Automated Storage Management (A
Do I have to install Real Application Clusters (RAC) and Automated Storage Management (ASM) for ETL
I have installed Oracle 10g Release 1 on WIndows 2000 with datawarehousing option.
Is it ok
Or do I need to install Oracle database again.
Please helpGreg,
From what you describe you did exactly the right thing. The runtime platform service will by default run on DWH01, but you can shut it down on that node and have it run on DWH02 (in case you wanted to bring down DWH01 but still run Warehouse Builder processes). Note that we strongly recommend using the net service name in the location registration in the deployment manager (so that you automatically take advantage of the client-side load balancing feature of RAC (as well as the server-side load balancing)).
Thanks,
Mark. -
Does OVM 3 support network I/O management and storage I/O prioritization
Does OVM 3 support any QoS setting for networking and/or storage? If so how are they set? I have been looking and can't seem to locate these settings.
In OVM 2.2 network I/O traffic management and storage I/O prioritization could be set as described in this 2.2 blog posting.
http://blogs.oracle.com/virtualization/entry/oracle_vm_22_new_feature_cpu_s
ThanksIt is not manageable through the GUI but can be changed in the vm.cfg file. Example:
vif_other_config = [['00:16:3e:31:d5:4b', 'tbf', 'rate=8mbit,latency=50ms'], ['00:16:3e:52:c4:03', 'tbf', 'rate=10mbit']]
- ingress
vif = ['mac=00:16:3e:31:d5:4b,bridge=xenbr0,rate=10Mb/s@50ms'] - egress -
XSAN and TSM (Tivoli Storage Manager)
Hello,
I wanted to know if anybody had already used the TSM (Tivoli Storage Manager) solution from IBM to backup an XSAN?
From what I have read on the IBM tech guide, the solution is fully compatible.
Best regards,
CédricHello Cedric.
I have used IBM TSM 5.2 with XSAN for a whole year without problems.
Our Xsan environment have 15 mixed INTEL&PPC Workstation, 2 Intel MDC, OSX-OSXSERVER 10.4.9, XSAN 1.4.1
We have a 3584 LTO library with 2 frames, 4 drives LTO2 and 2 LTO3. But we use only LTO3 with TSM from MAC. Our IBM TSM Server is a PSeries 630.
Now we are looking for a MAM system that can manage a proxy version of our archive. Parcial restores features could be very helpful for us.
CCL
Maybe you are looking for
-
IN Character mode Report can be print in bold
I have a report in character mode but i want to print some character in bold for example This is my first program in above line i want to print program in bold Jai
-
Error while Deploying WebApp in exploded form on 6.1
Hi, I am trying to deploy a webapp named "test" in the exploded form on 6.1 and the following is what I have put in the config.xml file. I am using SP2. <Application Deployed="true" Name="test" Path=".\config\coolDomain\applications"> <WebAppComponen
-
Camera Raw in Photoshop CC with a bug ?
I'm trying to edit some raw files from my Canon 6D with Camera Raw. I change the exposure setting, but everytime I move to the next slide bar ( contrast ou highlights, or any other), the exposure setting goes back to zero. What is happening ? I never
-
Fill in form with records from a database
hi using adobe live cycle desginer could some one guide me or tell me what to look for so i can: populate my pdf form with records from a ms access database my site is in asp thanks
-
Replication of Vendor BBP_VENDOR_SYNC - Partner Function required?
Hi everyone - quick one here... We are running Vendor Replication from R3 to SRM, and are using Replication Program BBP_VENDOR_SYNC overnight to do this. I am aware that we need Purchase Org Data setup for replication to occur. Now we have 2 Account