Storage Spaces: Virtual Disk taken offline during file copy, marked as "This disk is offline because it is out of capacity", but plenty of free space

Server 2012 RC. I'm using Storage Spaces, with two virtual disks across 23 underlying physical disks.
* First virtual disk is fixed provisioning, parity across 23 physical disks: 10,024GB capacity
* Second virtual disk is fixed provisioning, parity across the remaining space on 6 of the same physical disks: 652GB capacity
These have been configured as dynamic disks, with an NTFS volume spanned across the two (larger virtual disk first). Total volume size 10,676GB. For more details of the hardware, and why the configuration is like this, see: http://social.technet.microsoft.com/Forums/en-US/winserver8gen/thread/c35ff156-01a8-456a-9190-04c7bcfc048e
I'm copying several TB from a network share to this volume. It is very slow at ~12MB/sec, but works. However, three times so far, several hours in to the file copy and with plenty of free space remaining, the 10,024GB virtual disk is suddenly taken offline.
This obviously then fails the spanned volume and stops the file copy.
The second time, I took screenshots, below. The disk (Disk27) is marked offline due to "This disk is offline because it is out of capacity". And the disk in the spanned volume is marked as missing (which is what you would expect when one of its member disks
is offline).
I can then mark the disk (Disk27) back online again, and this restores the spanned volume. I can then re-start the file copy from where it failed. There doesn't appear to be any data loss, but it does cause an outage that requires manual attention. As you
can see, there is plenty of space left on the spanned volume.
Each time this has happened, there are a few event 150 errors in the System event log: "Disk 27 has reached a logical block provisioning permanent resource exhaustion condition.". Source: Disk.
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
  <Provider Name="disk" /> 
  <EventID Qualifiers="49156">150</EventID> 
  <Level>2</Level> 
  <Task>0</Task> 
  <Keywords>0x80000000000000</Keywords> 
  <TimeCreated SystemTime="2012-06-07T11:24:53.572101500Z" /> 
  <EventRecordID>14476</EventRecordID> 
  <Channel>System</Channel> 
  <Computer>Trounce-Server2.trounce.corp</Computer> 
  <Security /> 
  </System>
- <EventData>
  <Data>\Device\Harddisk27\DR27</Data> 
  <Data>27</Data> 
  <Binary>000000000200300000000000960004C0000000000000000000000000000000000000000000000000</Binary> 
  </EventData>
  </Event>
This error seems to be related to thin provisioning of disks. I found this:
http://msdn.microsoft.com/en-us/library/windows/desktop/hh848068(v=vs.85).aspx. But both these Virtual Disks are configured as Fixed, not Thin provisioning, so it shouldn't apply.
My thoughts: the virtual disk should not spuriously go offline during a file copy, even if it was out of space. And in any case, there is plenty of free space remaining. Also, I don't understand the reason for why it is marked as offline ("This disk is offline
because it is out of capacity"). Why would a disk go offline because it was out of thin capacity, rather than just returning an "out of disk space" error while keeping it online.

Interesting Thread, I've been having the same issue. I had a failed hardware RAID that was impossible to recover in place, so after being forced to do a 1:1 backup, I find myself with 5 2TB hard drives to play with. Storage Spaces seemed like an interesting
way to go until I started facing the issues we share.
So my configuration is A VM Running Windows Server 2012 RC with 5 Virtualized Physical drives using a SCSI interface, 2TB in size that make up my storage pool. A Single Thinly provisioned Disk of 18 TB (using 1 disk for parity)
Interestly enough, write speed has not been an issue on this machine (30~70MB/s, up from 256k on the beta) 
Of note to me is this error in my event log 13 minutes before the drive disappeared:
"The shadow copies of volume E: were deleted because the shadow copy storage could not grow in time.Consider reducing the IO load on the system or choose a shadow copy storage volume that is not being shadow copied."Source: volsnap, Event ID: 25, Level: Error
followed by:
"The system failed to flush data to the transaction log. Corruption may occur in VolumeId: E:, DeviceName: \Device\HarddiskVolume17.(The physical resources of  this disk have been exhausted.)"Source: Ntfs (Microsoft-Windows-Ntfs), Event ID: 140, Level: Warning
I figure the amount of space available to me before I start encountering physical limits is in the vicinity of about 7TB. It dropped out for the second time at 184 GB.
FYI, the number of columns created for me is 5
Regards,
Steven Blom

Similar Messages

  • "You Cannot Install OS X on This Disk. OS X cannot start up from this disk".

    Hey, I am running Lion on a Macbook Air 2010 model and i recently bought Mountain Lion through the MAC App Store. ive had problems installing it as i cant install it onto my Macintosh HD (startup Disk). Ive opened the ML installer and its rebooted my mac into the installer Menu, but when it goes to install, it stops and says You Cannot Install OS X on This Disk. OS X cannot start up from this disk." i want to be able to install ML overwriting Lion on my MacintoshHD (startup drive), are there any solutions that can fix this problem?

    Glad to hear it!
    I ran into another problem: The USB cable I was using for my external backup disk was not reliable.  I kept getting "disk ejects" at various points during migration.
    I bought a new "2.0 certified" cable and it worked fine.  The first two attempts resulted in re-installs.
    I'm happy to report that after the 3rd re-install of ML everything appears to be OK.
    I disabled TM and keeping my last b/u offline for a few more days to be safe....

  • I cant sync my ipad because I get a message that says 'not enough free space' but the more I delete, the less space I have.

    I cant sync my ipad because I get a message that says 'not enough free space' but the more I delete, the less space I have.  Does anyone else have this issue?

    http://support.apple.com/kb/TS1503
    http://www.apple.com/support/ipad/syncing/

  • In order to gain more available disk space, I would like to delete files on my start up disk.

    I need more disk space in order to work on iDVD projects. I would accept all ideas. How do I delete some files on my start up disk? Thanks
    Bill

    Freeing Up Space on The Hard Drive
    See Lion's Storage Display.
    You can remove data from your Home folder except for the /Home/Library/ folder.
    Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
    Also see Freeing space on your Mac OS X startup disk.
    I would think about installing a larger hard drive.

  • Using Photoshop Elements 12 on my MacBook Pro laptop, when saving a file I have been working on I get the following message although there is at least 50GB free space on the hard drive:  Could not save because the disk is full.

    I have been making Christmas Cards, working in layers and then flattening the image.  However, I am unable to save the final image as I get the following message:  Could not save because the disk is full.  Looking at the system report for my laptop shows there is 52GB of free space.

    Well, running on a 2006 model.  I did not have a startup disc.  Initially, it booted up on original software in 2006.  Since then, I've upgraded to 10.6 via a box set.  And, since then I think I popped it up to lion. 
    All I have on a disc is snow leopard.  And, I can't get farther than the setup screen due to hard drive.  I'm taking to a apple authorized repair store right now.  We'll see what they tell me .  I'm just going to weigh the cost of repair vs. buying new.
    Another bad, stupid thing is I had no means of backing up my stuff.  So, I might have lost things like music, vids, etc.  we'll see if they can recover.  If the cost is too much for repair I might just forget it and start over with a new system.  Just not sure at this point.

  • "Volume not found" I have 3 iphoto_libraries stored in a external disk, while the actual files are in other external disk. Ive moved together iphotolibraries and files but: HOW CAN I TELL THE LIBRARIES WHERE TO FIND THEM NOW?

    I have three iphoto_libraries stored in a external disk PASSPORT (one for each trip imovie Im making -Ive managed this way the libraries so to not confuse the trips) while the actual files are in OTHER external disk LACIE. And everything was fine: imovie find each library, could work with it, or iphoto could edit the files.
    But one day everything crashed at the same time: i opened iphoto to find 3 different scenarios:
    1) iphoto_library GREECE was there, but not the albums i prepared. no events. when double click in any of them: "Volume not found"
    2) iphoto_library ITALY was there, and the albums i prepared too, but empty.
    in both cases I can only see the photos in 'photos'  because 'events'  shows some events with photo preview and some with no preview, just some kind of preset clipart palm tree, but if i enter the event, photos are there but again: when double click in any item: "Volume not found"
    3)  iphoto_library ISRAEL was there, the albums too, when double click in any of them: all OK
    The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT. Also: I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied. Also i have all the movie_libraries in the PASSPORT as well. What happened??
    Solution? Nothing yet. Ive moved now all the photo folders from LACIE together in PASSPORT with the iphotolibraries but problem persist:
    HOW CAN I TELL THE LIBRARIES WHERE TO LOOK FOR THE VOLUMES NOW?
    "Volumes" are the original files aren't them?
    Please help. this is so annoying to try and find in the forum, to tricky to explain
    I have a Macbook pro retina Yosemite 10.10.1 / iphoto 9.6 (910-29)/ iMovie 10.0.6
    THANK YOU
    Vicky

    The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT.
    This is not clear, especially when you say
    I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied.
    Especially as the message you're getting is typical of a library where the ' option "copy to file" or something like that' is unchecked.
    So it's a simple question:
    Are you these Managed or Referenced Libraries?
    A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
    A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

  • WRT610N USB port locks up during file copy

    Brand new wrt610n works like a charm except for the USB port.  We bought the router specifically for that feature and we got a small USB drive to attach to it.  Problem is, when backing up a workstation using just file copy of no more than 5G of data, the USB port hangs up.  Can't get to it via the management we interface storage tab.  The rest of the router continues to function properly.  The USB light stays on.  Disconnecting the drive from the router and reconnecting causes the USB light to go off but it doesn't come back on.  A router reset corrects the locked USB port.  The drive functions properly connected to a workstation or our DVR.
    Is this broken hardware or broken software?

    Checked the firmware for updates but nothing on this problem.  The drive is a WD 750g USB 2.0.  Tech support wants me to reflash the router just incase the firmware was corrupted.
    If that doesn't work, I suppose I could reformat the drive with the Linksys router management software.  I didn't have to do that because it recognized the drive right out of the box as FAT2.  This drive works fine attached to one fo the PCs.
    ./d

  • Is there an option to use the old "Don't Replace" option during file copying on OSX Lion??

    I am extremely upset at the removal of "Don't Replace" function during copying. I often copy many of my music, picture and video files onto external hard drives for back up and often times they total more than 100 files. On Snow Leopard when I would copy files onto the external if some files were already on the external hard drive it would give me the an option of not replacing the files already there and just copying the rest. With Lion the new option is to either make a secondary copy of the file, just stop the whole copy or just replace the file already there. Because of this i have to spend the extra time of replacing all the files each time i back up, or stop the copy and go through hundreds of files to deselect the file already on the external drive. PLEASE BRING BACK THE "DONT REPLACE" Option

    Upon further use and file moving, I'm now in agreement with Kappy.    I made a blank TextEdit file on the desktop, copied it to my Home folder, then tried to copy again. 
    This is the result:
    Then I made three untitled TextEdit files and did the same procedure.
    This is the next result:
    That looks pretty standard and the same as it was before.   What function do you guys claim to be missing? 

  • Plenty of free space, music not loading.  HELP...

    The iPod has successfully loaded about 12-31 songs when I first used it. It still has 7.21 GB of Free Space left. I need information about why the rest of my music is not loading to the iPod Nano 3g. My music, in total, is about 1 GB, give or take a few KB.
    "Attempting to copy to the disk " Ipod Name__" failed. The disk could not be read from or written to."

    Sounds like a damage library.  Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Reinstalled snow leopard again, but still no free space? HELP!

    Hi all,
    im still very new to all this so hope someone can explain it in simple terms for me! My macbook only has 20GB left and is chock full and running quite slow, so I went into mac store recently and the very helpful guys told me to do the following;
    backed everything up to time machine external hard drive first, then they said to reinstall my installation disks to wipe everything and then reinstall snow leopard again. I clicked to option of erase and install as i thought that would overwrite everything, but after the few hours it took to do all this - i logged in again and everything is still on there!
    how do i wipe everything on my computer safely (and make sure its backed up) to free up space?

    Hi starbud;
    Something sounds wrong here. It doesn't sound like you are working with a Snow Leopard DVD because with SL Apple dropped the erase & install option from their installer.
    In order to do an erase and install with SL, you must open Disk Utility when booted from the DVD and erase the disk from there.
    Having said all of that I think this plan you were told is totally futile because if you erase and install and then restore from Time Machine, your disk is going to be just as full as it was when you stated.
    A better solution is to get a tool like OmniDiskSweeper and find out what is taking up all the space. Then delete what you can and move whatever you can't delete some place else.
    Whatever you don't pick on the operating system. It is general the least of your problems. The heavy hitters are music, photos and videos.
    Allan
    Message was edited by: Allan Eckert

  • Error message when trying to install mavericks. It won't let me select a disk to install Mavericks on. Message says "This disk is used to Time Machine backups."  It is NOT used for back ups. help

    When trying to chose a disk on which to install mavericks I get a message that says "this disk is used for Time Machine backups" and cannot be used.  Help!

    I don't know what will help at this point. You should never update a system that has problems, unless you're absolutely sure that the problems are caused by a bug that is fixed in the update. With your backups in an uncertain state, you should not update or do anything else except start a new backup.

  • USB Drive Resets during file copy, interrupting file operations

    Fresh Arch Linux install, working USB thumb drive (Windows, previous Arch Linux setups, etc.), formatted FAT32.
    Seems to randomly reset, eject, and auto-re-mount during extensive file operations (i.e. copying 4gb worth of 800 files from the USB thumb drive to disk).
    I've tried various USB ports to no avail; no external hub being used.
    Thoughts? Not sure where to begin diagnosing:
    dmesg:
    usb 1-1: configuration #1 chosen from 1 choice
    scsi17 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 15
    usb-storage: waiting for device to settle before scanning
    scsi 17:0:0:0: Direct-Access OCZ RALLY2 1100 PQ: 0 ANSI: 0 CCS
    sd 17:0:0:0: Attached scsi generic sg2 type 0
    usb-storage: device scan complete
    sd 17:0:0:0: [sdb] 31326208 512-byte logical blocks: (16.0 GB/14.9 GiB)
    sd 17:0:0:0: [sdb] Write Protect is off
    sd 17:0:0:0: [sdb] Mode Sense: 43 00 00 00
    sd 17:0:0:0: [sdb] Assuming drive cache: write through
    sd 17:0:0:0: [sdb] Assuming drive cache: write through
    sdb: sdb1
    sd 17:0:0:0: [sdb] Assuming drive cache: write through
    sd 17:0:0:0: [sdb] Attached SCSI removable disk
    usb 1-1: reset high speed USB device using ehci_hcd and address 15
    sd 17:0:0:0: [sdb] Unhandled error code
    sd 17:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
    end_request: I/O error, dev sdb, sector 7589504
    sd 17:0:0:0: [sdb] Unhandled error code
    sd 17:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
    end_request: I/O error, dev sdb, sector 7589744
    sd 17:0:0:0: [sdb] Unhandled error code
    sd 17:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
    end_request: I/O error, dev sdb, sector 7589776
    usb 1-1: USB disconnect, address 15
    FAT: bread failed in fat_clusters_flush
    FAT: FAT read failed (blocknr 3805)
    FAT: Directory bread(block 24147944) failed
    FAT: FAT read failed (blocknr 3818)
    <snip lots of repeats>
    FAT: FAT read failed (blocknr 4032)
    FAT: bread failed in fat_clusters_flush
    FAT: bread failed in fat_clusters_flush
    FAT: bread failed in fat_clusters_flush
    usb 1-1: new high speed USB device using ehci_hcd and address 16
    usb 1-1: configuration #1 chosen from 1 choice
    scsi18 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 16
    usb-storage: waiting for device to settle before scanning
    scsi 18:0:0:0: Direct-Access OCZ RALLY2 1100 PQ: 0 ANSI: 0 CCS
    sd 18:0:0:0: Attached scsi generic sg2 type 0
    usb-storage: device scan complete
    sd 18:0:0:0: [sdb] 31326208 512-byte logical blocks: (16.0 GB/14.9 GiB)
    sd 18:0:0:0: [sdb] Write Protect is off
    sd 18:0:0:0: [sdb] Mode Sense: 43 00 00 00
    sd 18:0:0:0: [sdb] Assuming drive cache: write through
    sd 18:0:0:0: [sdb] Assuming drive cache: write through
    sdb: sdb1
    sd 18:0:0:0: [sdb] Assuming drive cache: write through
    sd 18:0:0:0: [sdb] Attached SCSI removable disk
    lsusb -v for the drive:
    Bus 001 Device 016: ID 0325:ac02 OCZ Technology Inc ATV Turbo / Rally2 Dual Channel USB 2.0 Flash Drive
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 64
    idVendor 0x0325 OCZ Technology Inc
    idProduct 0xac02 ATV Turbo / Rally2 Dual Channel USB 2.0 Flash Drive
    bcdDevice 11.00
    iManufacturer 1 OCZ Technology
    iProduct 2 RALLY2
    iSerial 3 AA04012700275633
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 32
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0x80
    (Bus Powered)
    MaxPower 300mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 2
    bInterfaceClass 8 Mass Storage
    bInterfaceSubClass 6 SCSI
    bInterfaceProtocol 80 Bulk (Zip)
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0200 1x 512 bytes
    bInterval 255
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x02 EP 2 OUT
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0200 1x 512 bytes
    bInterval 255
    Device Qualifier (for other device speed):
    bLength 10
    bDescriptorType 6
    bcdUSB 2.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 64
    bNumConfigurations 1
    Device Status: 0x0000
    (Bus Powered)
    Last edited by lieut_data (2009-12-26 17:39:56)

    Jithin wrote:
    When ever I copy some files or create a file in my external USB drive which is a FAT32 one. file permissions are not preserved.
    From <http://support.apple.com/kb/HT3764>:
    "The MS-DOS (FAT32) file system format does not support permissions, file owners, and groups. Such permissions are synthesized on Mac OS X with some default permissions. Because of this all files will have the same permissions […]"
    So it's not "how it work in mac", but it's a limitation of the FAT32 file system.

  • Why some files copy me on hard disk with 0 bytes?

    I try copy on hard disk video/photos and few files have 0 bytes? Why? On the Iphone 4S work, but not on the computer...

    Have you tried changing the file format of the external HD?
    Open Disk Utility and select the external HD's top icon (the one that comprises of letters and numbers and not the name you gave it). Click on the Partition tab. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.

  • HT204406 I can't seem to download songs from iTumes Match on my new iPhone 5. It still works fine on my iPad. Both are running ios6 and there is plenty of free space on the phone (20 GB or so). The download icon shows & flashes but nothing happens.

    I am trying to play songs from iTunes Match on my phone everything is enabled. The songs and playlists show up but when I select one it won't download or play. The download status icon next to the song name flashes on and off but nothing happens. When I go to the iTunes Store the download section shows the same behavior - it flashes that there is 1 download continuously but nothing downloads. My iPad on the same network also running ios6 works fine. Any ideas?

    Problem closed (although not resolved).  After working with Apple support, no resolution was found.  I asked for a refund of the iTunes match purchase price, which was granted.  Interestingly the support tech, who was very nice if not particularly helpful from a technical point of view, spun the "resolution" of refunding my iTunes match purchase price as a positive one, here is a quote from the final email
    "I'm glad to hear that you're not having issues with the songs you've purchased.  Nothing makes Apple happier than to hear that our customers concerns have been rectified."
    It is notable that I never had an issue downloading music directly purchased thru the iTunes store, the only issue that existed was downloading songs that I ripped from my CD collection and "matched". 
    I'm happy that I received my money back, however I wish that the iTunes Match service worked for me (I was looking forward to this service).  I'm most upset at the time I wasted trying to fix this problem.
    I'll now download music the old fashioned way: syncing with iTunes directly.

  • I recently upgrade my iPhone 4S to the 6OS and now I am not able to synch my iPhone to my iTunes because it says my iPhone doesn't have enough money but there is plenty of free space

    I guess it was the upgrade to iOS 6.0.1

    Restore iPhone with iTunes on computer, this is different than update. Also make sure iTunes is up to date.

Maybe you are looking for

  • 15 inch Mid-2010 MacBook Pro freezing since installing Lion

    I've had this problem for a while now. It started a few weeks after I installed Lion in the summer. My MacBook Pro would just freeze without warning and the only thing I can do is a force shutdown. I've checked the logs, and these freezes do not log

  • Upgrading Safari from 1.3.2 to 2.0

    A year and a half after buying this, my first Mac, I still find myself up against seemingly brick walls in trying to understand the "deal" with Safari. First question: Why isn't it one of the applications that warrants ongoing upgrade notices? Second

  • Server is requesting Authentication for.

    Hi, New in SAP XI. When i try to open the Integration Builder : Design Window , a pop up open asking for the User Authentication saying "Server is requesting Authentication for " Please tell the solution. Regards Rajiv Kumar garg

  • Why does my mail not work after installing Yosemite?

    I just installed Yosemite. Right after when I tried to open my mail, it right away wants to download all my mail. Then it fails in doing so and says to continue in order to launch Mail Import Assistant. Then I push Continue, and it then says; "Your m

  • BOXI R2 Auditing and Performance Management Recommended Database Sizes

    Hi, We have a 8 node BOXI R2 Cluster which we want to enable Auditing and Performance Management. Could anyone recommend what the sizes of these two databases should be in GB? I have to request appropriate disk space from our SAN team, and the databa