Store server status....failed

Hi I recently had a JMS failer, it just stopped working and I noticed my /var directory was maxed out. I found huge log/stats files under /var/opt/SUNWam/stats/, so I moved these to a filesystem with more space so I can examine them later [does anybody know what they monitor and how to configure the monitoring intervals etc]. I restarted the system and then started directory server, I noticed entries were being made to these files [so I think they are ok].
The big problem now is Messenger's store server status fails so it will not start at all. This is what I get:
# /opt/SUNWmsgsr/sbin/start-msg
Connecting to watcher ...
Launching watcher ...
Starting ens server ... 1627
Starting store server .... 1628
checking store server status ............ failed
So I got no email :^(
Does anybody have an idea what might be the problem. Is the store corrupted? how can I fix this?
Thanks in advance.
-James

Thanks Jay what I think happend was the /var went to 100% and mail stopped [I cleared out some am stats/logs]. Now I am not sure why stored would want to write to this partition I have store [all my users] on another disk, but maybe I left a few test accounts on the original default partition. Here is what I got from the logs.
# more /opt/SUNWmsgsr/log/default
[25/Oct/2006:15:15:01 -0400] correo msprobe[27193]: General Information: Log created (1161803701)
[25/Oct/2006:15:15:01 -0400] correo msprobe[27193]: General Warning: alarmid=diskavail|instance=Mboxlist Directory|time=25/Oct/2006:15:15:01 -0400
|value=0|low=0|high=62|threshold(below)=10|count below threshold=42|warning sent=92
[25/Oct/2006:15:25:01 -0400] correo msprobe[27202]: General Warning: alarmid=diskavail|instance=default|time=25/Oct/2006:15:25:01 -0400|value=0|lo
w=0|high=60|threshold(below)=10|count below threshold=42|warning sent=92
[25/Oct/2006:23:00:00 -0400] correo imexpire[27410]: General Notice: Expire started (0)
[25/Oct/2006:23:00:23 -0400] correo imexpire[27410]: General Notice: Expire finished
[26/Oct/2006:10:44:57 -0400] correo stored[1824]: Store Warning: Database snapshot failed: snapshot copy log file failed
[26/Oct/2006:10:45:34 -0400] correo stored[1824]: Store Critical: Mailbox database error: write: 0xfd9a03e4, 1774: No space left on device
[26/Oct/2006:11:27:23 -0400] correo imsched[1829]: General Notice: shutting down
[26/Oct/2006:11:27:23 -0400] correo stored[1824]: General Error: mshttpd process 1827 is running, cannot start/stop stored
[26/Oct/2006:11:27:23 -0400] correo stored[1824]: General Warning: ims_master process 28043 exited abnormally
[26/Oct/2006:11:27:23 -0400] correo stored[1824]: General Warning: ims_master process 28049 exited abnormally
[26/Oct/2006:11:27:23 -0400] correo stored[1824]: General Warning: ims_master process 28165 exited abnormally
[26/Oct/2006:11:27:23 -0400] correo stored[1824]: General Warning: ims_master process 28163 exited abnormally
[26/Oct/2006:11:27:23 -0400] correo stored[1824]: General Warning: ims_master process 28166 exited abnormally
[26/Oct/2006:11:27:23 -0400] correo stored[1824]: Store Notice: Cannot stop stored when other message store processes are running. Please stop the
other message store processes before stopping stored
[26/Oct/2006:11:29:28 -0400] correo stored[1824]: General Warning: imapd process 1825 exited abnormally
[26/Oct/2006:11:29:28 -0400] correo stored[1824]: General Warning: popd process 1826 exited abnormally
[26/Oct/2006:11:29:28 -0400] correo stored[1824]: General Warning: mshttpd process 1827 exited abnormally
I have checked and stored is not running nor anything by mailsrv. I am not sure where store.pid is?
There are 2 of those log files:
# ls /var/opt/SUNWmsgsr/store/mboxlist/
__db.001 __db.003 __db.005 folderlock log.0000000076 peruser.db subscr.db
__db.002 __db.004 folder.db log.0000000075 lright.db quota.db
I have fsck all my disks [var, /opt, /export/home etc] and all is well. I have also been able to start with start-msg:
sched, ens, dispatcher, job_contriller
- pop and imap don't start without store.
I don't know what to do next thanks again
-james

Similar Messages

Sql Server 2008 R2 setup status failed

Hi guys, plz help me when i install Sql2008 i get this error.... plx help me if you have solution...
Thanks in Advance...
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068052377
Exit facility code: 1212
Exit error code: 1639
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-03-14 18:21:32
End time: 2014-03-14 18:30:00
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: NIRMAL-PC
Machine processor count: 8
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United Kingdom)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: E:\Software _2\Software _2\SQL2008\x64\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: NIRMAL-PC\sdfg
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQL2008
INSTANCENAME: SQL2008
ISSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: NIRMAL-PC\sdfg
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: True
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Analysis Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_as_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Integration Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Books Online
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\SystemConfigurationCheck_Report.htm

Hello,
Please try to uninstall SQL Server using YoyoYu suggestions on the following thread:
http://social.msdn.microsoft.com/Forums/en/sqlexpress/thread/4d6158a1-b601-428c-aad4-a1716e76de1a
When finish, re-install SQL Server again.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Adf input file - connection to the server has failed(status=unknown)

We are using input file component to upload an excel file and read it. Sometimes we are getting error - " A Connection to the server has failed. (status=unknown) " when we click on browse and add the file. We are getting this error when we just add the file. We are not doing any operation while adding the file. After the file is added, we have a submit button to do post operations on file. But we are getting this error immediately after we add the file. JDeveloper version 11.1.1.5.0.
Any inputs will help us.
Edited by: adf_forum on May 23, 2013 5:24 PM

Hi,
there must be a stack trace in the log files that gives you more information about this. Chances are the browser closes the socket connection, which you can verify by using another browser and avoiding e.g. VPN connect for testing. Another test to perform is to try 11.1.1.7 and see if this works for the use case in case you sit on a known and already fixed problem
Frank

Internet Explorer:A Connection to the server has failed (status=12152)

I am getting "A Connection to the server has failed (status=12152)" error in my adf application when using Internet Explorer. The application is deployed on a hosted server with SSL.
This seems to happen randomly. After clicking on "OK" and the action is correctly performed again. I don't have this issue in Firefox.
There are no error messages in the server logs.
Can you please let me know how to fix this issue.
ADF:11.1.1.6
WLS: 10.3
Thanks
Shobana

Hi,
I am experiencing the same problem.
Can anyone help?
Thanks.

A connection to the server has failed. (status=403) error

Hi,
I have created an application with ADF security. When a user is redirected to the login.jspx page, if he clicks on any tab on the menubar(each of which are different jspx pages), it throws a pop up with the following error message-
"A connection to the server has failed. (status=403)"
Can someone please tell me where the problem lies.
Regards
Apoorva

Hi Apoorva,
When there is no welcome page defined in the application's web.xml file you can get a 403 error.
Also note that when an user has not been authenticated yet, should not have access to any secured pages, any navigation component on the welcome page that points to a secured page. So if that's the case, any component that points to secured pages should be hidden.
For further information you can take a look at the document available at http://docs.oracle.com/cd/E14571_01/web.1111/b31974/adding_security.htm#BABDEICH
Hope this helps.
Thanks,
Cris

While Opening HFM application getting Error : "A connection to the server has failed. (status=503)"

Hi All,
While Opening HFM application I'm getting Error : "A connection to the server has failed. (status=503)".
I Checked the Doc ID 1516598.1 and tried to increase the timeout setting, which really didn't help.
Where can check a log for this connection issue, not able to see any error in Starter or HFM server logs.
Please help me to fix this issue.
Server: Windows 2008 R2
EPM Application: 11.1.2.2
Database: Oracle 11g
Regards,
Rajeevan D

Hi!!
     I am facing the same issue and have increased the timeout setting according to the Doc ID 1516598.1.
     When I open up the app, it takes more than 5 minutes but it just get little longer and I've got the error....
     My HFM is at 11.1.2.2.300 version.
Server: Windows 2008 R2
EPM Application: 11.1.2.2
Database: Oracle 11g
Thanks

Error while installing exchange2007 : Unable to initialize the Microsoft Exchange Information Store service. Failed to find the

Hi,
I am trying fresh install of exchange2007, everything gone well but, finally it thrown a error saying :
Unable to initialize the Microsoft Exchange Information Store service. Failed to find the working directory parameter from the registry - Error 0x80004005.
the installation log says
6/5/2007 3:14:05 PM] [1] Processing component 'Mailbox Service Control (Last)' (Starting mailbox services).
[6/5/2007 3:14:05 PM] [1] Executing 'start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"', handleError = False
[6/5/2007 3:14:05 PM] [2] Launching sub-task '$error.Clear(); start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"'.
[6/5/2007 3:14:05 PM] [2] Beginning processing.
[6/5/2007 3:14:05 PM] [2] The maximum wait for the operation is set to 'unlimited'.
[6/5/2007 3:14:05 PM] [2] Service checkpoint has progressed. Previous checkpoint='0' - Current checkpoint='1'.
[6/5/2007 3:14:05 PM] [2] Will wait '10000' milliseconds for the service 'MSExchangeIS' to reach status 'Running'.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to reach status 'Running' on this server after waiting for '10000' milliseconds.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] [ERROR] Unexpected Error
[6/5/2007 3:14:15 PM] [2] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] Ending processing.
[6/5/2007 3:14:15 PM] [1] The following 1 error(s) occurred during task execution:
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.ServiceFailedToStartException: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] Setup is halting task execution because of one or more errors in a critical task.
[6/5/2007 3:14:15 PM] [1] Finished executing component tasks.
[6/5/2007 3:14:15 PM] [1] Ending processing.
[6/5/2007 3:14:18 PM] [0] End of Setup
[6/5/2007 3:14:18 PM] [0] **********************************************
this I am trying on my test system please help me out in resolving the issue
thanks in advance,

Gary,
Open Registry Editor.
In Registry Editor, navigate to the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
Create the following value (REG_SZ): Working Directory and give it a value that points to the new database folder.
Make sure you back up the registry before you do any changes on it.
Raj

DAG Sporadic Entire Server DB Fail Over

Hi,
I have been having this issues for a while now, I have two physical exchange servers in a DAG, both on Exchange 2013 CU1. Randomly, every few days and various times, Server1 will fail all of it's databases over to Server2. I'll redistribute them, and again,
say Server2 will fail all databases to Server1. In short, both servers at times have failed their databases over.
I started with this: http://technet.microsoft.com/en-us/library/dd351258(v=exchg.150).aspx which led me to setup monitoring of the Microsoft-Exchange-ManagedAvailability logs. I can tell you that replication tests work fine, and the health of all the
databases are fine.
My monitoring turned up the following errors, in this example "EX0001" was the server that failed all of it's databases over to "EX0002". It seems pretty clear to me, that Exchange Managed Availability, is finding an issue with
EWS, attempting to restart the MSExchangeServicesApp pool and cannot due to "Throttling" so ti fails the DB's over, that's my best guess...the problem is I dont know how to fix this...I've run through troubleshooting EWS Healthset, nothing
really turns up... http://technet.microsoft.com/en-us/library/ms.exch.scom.ews.protocol(v=exchg.150).aspx
EX0001
1011
Microsoft-Exchange-ManagedAvailability
Recovery
Microsoft-Exchange-ManagedAvailability/RecoveryActionLogs
5/22/2014 7:06:43 AM
Warning (Info)
1520183
NT AUTHORITY\SYSTEM
RecycleApplicationPool-MSExchangeServicesAppPool-EWSSelfTestRestart: Throttling rejected the operation
EX0001
4
Microsoft-Exchange-ManagedAvailability
Monitoring
Microsoft-Exchange-ManagedAvailability/Monitoring
5/22/2014 7:17:27 AM
Error (Info)
8287
NT AUTHORITY\SYSTEM
The EWS.Protocol health set has detected a problem on EX0001 beginning at 5/22/2014 10:55:12 AM (UTC). The health manager is reporting that recycling the MSExchangeServicesAppPool
app pool has failed to restore health and it has tried to fail over active copies of local databases to a healthy server. Attempts to auto-recover from this condition have failed and requires Administrator attention. Details below: MachineName:
EX0001 ServiceName: EWS.Protocol ResultName: EWSSelfTestProbe/MSExchangeServicesAppPool Error: System.Exception: System.Exception: >>> PRIMARY ENDPOINT VERIFICATION EwsUrl=https://localhost:444/ews/exchange.asmx
UserName/Password=HealthMailbox663889950a344102878cede289222a46@domain.local/xGAVmP[^jn{qGgOx0Jtx:4X+-j@?d%XM?@7yErsoFF[_#u[%LcX=0hPzMln#1PiQ/7z?14rJJs8Dc)AYLi0F9mU)bMpL_gj{Q3*[Yt1:UgX=:CkQc=[Xuagz%Od=|@tt AuthMethod=CAFE ConvertId (Attempt #0) Status=The
request failed. The operation has timed out ConvertId (Attempt #0) Latency=59521.1327 ConvertId (Attempt #1) Status=iteration 1; 55.427003 seconds elapsed ConvertId (Attempt #1) Latency=55427.003 at Microsoft.Exchange.Monitoring.ActiveMonitoring.Ews.Probes.EWSCommon.RetrySoapActionAndThrow(Action
operation, String soapAction, ExchangeServiceBase service) at Microsoft.Exchange.Monitoring.ActiveMonitoring.Ews.Probes.EWSGenericProbeCommon.ExecuteEWSCall(String endPoint, String operation, Boolean verifyAffinity) at Microsoft.Exchange.Monitoring.ActiveMonitoring.Ews.Probes.EWSGenericProbeCommon.DoWorkInternal(CancellationToken
cancellationToken) Exception: System.Exception: System.Exception: System.Exception: >>> PRIMARY ENDPOINT VERIFICATION EwsUrl=https://localhost:444/ews/exchange.asmx
UserName/Password=HealthMailbox663889950a344102878cede289222a46@domain.local/xGAVmP[^jn{qGgOx0Jtx:4X+-j@?d%XM?@7yErsoFF[_#u[%LcX=0hPzMln#1PiQ/7z?14rJJs8Dc)AYLi0F9mU)bMpL_gj{Q3*[Yt1:UgX=:CkQc=[Xuagz%Od=|@tt AuthMethod=CAFE ConvertId (Attempt #0) Status=The
request failed. The operation has timed out ConvertId (Attempt #0) Latency=59521.1327 ConvertId (Attempt #1) Status=iteration 1; 55.427003 seconds elapsed ConvertId (Attempt #1) Latency=55427.003 at Microsoft.Exchange.Monitoring.ActiveMonitoring.Ews.Probes.EWSCommon.RetrySoapActionAndThrow(Action
operation, String soapAction, ExchangeServiceBase service) at Microsoft.Exchange.Monitoring.ActiveMonitoring.Ews.Probes.EWSGenericProbeCommon.ExecuteEWSCall(String endPoint, String operation, Boolean verifyAffinity) at Microsoft.Exchange.Monitoring.ActiveMonitoring.Ews.Probes.EWSGenericProbeCommon.DoWorkInternal(CancellationToken
cancellationToken) at Microsoft.Exchange.Monitoring.ActiveMonitoring.Ews.Probes.EWSCommon.ThrowError(Object key, Object exceptiondata, String logDetails) at Microsoft.Exchange.Monitoring.ActiveMonitoring.Ews.Probes.EWSGenericProbeCommon.DoWorkInternal(CancellationToken
cancellationToken) at Microsoft.Exchange.Monitoring.ActiveMonitoring.Ews.Probes.EWSGenericProbeCommon.RunEWSGenericProbe(CancellationToken cancellationToken) at Microsoft.Exchange.WorkerTaskFramework.WorkItem.Execute(CancellationToken joinedToken) at Microsoft.Exchange.WorkerTaskFramework.WorkItem.<>c__DisplayClass2.<StartExecuting>b__0()
at System.Threading.Tasks.Task.Execute() ExecutionContext: EWSGenericProbeError:Exception=System.Exception: System.Exception: >>> PRIMARY ENDPOINT VERIFICATION EwsUrl=https://localhost:444/ews/exchange.asmx
UserName/Password=HealthMailbox663889950a344102878cede289222a46@domain.local/xGAVmP[^jn{qGgOx0Jtx:4X+-j@?d%XM?@7yErsoFF[_#u[%LcX=0hPzMln#1PiQ/7z?14rJJs8Dc)AYLi0F9mU)bMpL_gj{Q3*[Yt1:UgX=:CkQc=[Xuagz%Od=|@tt AuthMethod=CAFE ConvertId (Attempt #0) Status=The
request failed. The operation has timed out ConvertId (Attempt #0) Latency=59521.1327 ConvertId (Attempt #1) Status=iteration 1; 55.427003 seconds elapsed ConvertId (Attempt #1) Latency=55427.003 at Microsoft.Exchange.Monitoring.ActiveMonitoring.Ews.Probes.EWSCommon.RetrySoapActionAndThrow(Action
operation, String soapAction, ExchangeServiceBase service) at Microsoft.Exchange.Monitoring.ActiveMonitoring.Ews.Probes.EWSGenericProbeCommon.ExecuteEWSCall(String endPoint, String operation, Boolean verifyAffinity) at Microsoft.Exchange.Monitoring.ActiveMonitoring.Ews.Probes.EWSGenericProbeCommon
FailureContext: ResultType: Failed IsNotified: False DeploymentId: 0 RetryCount: 0 ExtensionXml: Version: StateAttribute1:
EWS StateAttribute2: Unknown StateAttribute3: StateAttribute4: StateAttribute5: StateAttribute6: 0 StateAttribute7: 0 StateAttribute8:
0 StateAttribute9: 0 StateAttribute10: 0 StateAttribute11: StateAttribute12: StateAttribute13: StateAttribute14: StateAttribute14:
StateAttribute16: 0 StateAttribute17: 0 StateAttribute18: 0 StateAttribute19: 0 StateAttribute20: 120011 StateAttribute21: [000.000] EWSCommon
start: 5/22/2014 11:13:13 AM [000.000] Configuring EWScommon [000.000] Probe time limit: 120000ms, HTTP timeout: 59500ms, RetryCount: 1 [000.047] using authN: CAFE
[email protected] xGAVmP[^jn{qGgOx0Jtx:4X+-j@?d%XM?@7yErsoFF[_#u[%LcX=0hPzMln#1PiQ/7z?14rJJs8Dc)AYLi0F9mU)bMpL_gj{Q3*[Yt1:UgX=:CkQc=[Xuagz%Od=|@tt
[000.047] using HTTP request timeout: 59500 ms [000.047] action iteration 0 [000.047] starting (total time left 119954 ms) [059.568] action threw Microsoft.Exchange.WebServices.Data.ServiceRequestException: The request failed. The operation has timed out [064.584]
action iteration 1 [064.584] starting (total time left 55416 ms) [120.011] action wait timed out [120.011] action threw System.TimeoutException: iteration 1; 55.427003 seconds elapsed StateAttribute22: StateAttribute23:
StateAttribute24: StateAttribute25: PoisonedCount: 0 ExecutionId: 32395373 ExecutionStartTime: 5/22/2014 11:13:13 AM ExecutionEndTime: 5/22/2014
11:15:13 AM ResultId: 253233015 SampleValue: 0 ------------------------------------------------------------------------------- States of all monitors within the health set: Note: Data may be stale. To get current data,
run: Get-ServerHealth -Identity 'EX0001' -HealthSet 'EWS.Protocol' State Name TargetResource HealthSet AlertValue ServerComponent ----- ---- -------------- --------- ---------- --------------- NotApplicable EWSSelfTestMonitor MSExchangeServicesAppPool EWS.Protocol
Unhealthy None NotApplicable EWSDeepTestMonitor DG01DB15 EWS.Protocol Unhealthy None NotApplicable PrivateWorkingSetWarningThresholdExc... msexchangeservicesapppool EWS.Protocol Healthy None NotApplicable ProcessProcessorTimeErrorThresholdEx... msexchangeservicesapppool
EWS.Protocol Healthy None NotApplicable ExchangeCrashEventErrorThresholdExce... msexchangeservicesapppool EWS.Protocol Healthy None States of all health sets: Note: Data may be stale. To get current data, run: Get-HealthReport -Identity 'EX0001' State HealthSet
AlertValue LastTransitionTime MonitorCount ----- --------- ---------- ------------------ ------------ NotApplicable Autodiscover.Protocol Healthy 3/8/2014 12:46:17 AM 4 NotApplicable ActiveSync.Protocol Healthy 3/8/2014 1:15:35 AM 7 NotApplicable ActiveSync
Healthy 3/8/2014 2:08:15 AM 3 NotApplicable EDS Healthy 5/22/2014 5:19:41 AM 13 NotApplicable ECP Healthy 3/8/2014 1:15:27 AM 3 NotApplicable EventAssistants Healthy 5/22/2014 5:48:56 AM 28 NotApplicable EWS.Protocol Unhealthy 5/22/2014 7:07:12 AM 5 NotApplicable
FIPS Healthy 5/21/2014 10:24:01 PM 18 NotApplicable AD Healthy 2/23/2014 10:42:29 PM 10 NotApplicable OWA.Protocol.Dep Healthy 5/22/2014 5:19:40 AM 1 NotApplicable Monitoring Unhealthy 5/22/2014 5:35:31 AM 9 Online HubTransport Unhealthy 5/22/2014 5:19:43
AM 138 NotApplicable DataProtection Healthy 5/22/2014 7:08:02 AM 201 NotApplicable AntiSpam Healthy 5/22/2014 5:19:40 AM 4 NotApplicable Network Healthy 5/21/2014 10:36:54 PM 1 NotApplicable OWA.Protocol Healthy 3/8/2014 1:15:34 AM 5 NotApplicable MailboxMigration
Healthy 3/8/2014 12:46:18 AM 4 NotApplicable MRS Healthy 3/8/2014 12:44:35 AM 9 NotApplicable MailboxTransport Healthy 5/22/2014 5:19:41 AM 57 NotApplicable PublicFolders Healthy 5/21/2014 10:44:15 PM 4 NotApplicable RPS Healthy 2/23/2014 11:38:33 PM 1 NotApplicable
Outlook.Protocol Healthy 4/22/2014 11:04:18 AM 3 NotApplicable UserThrottling Healthy 5/22/2014 5:51:13 AM 7 NotApplicable SiteMailbox Healthy 3/8/2014 2:10:53 AM 3 NotApplicable UM.Protocol Healthy 5/22/2014 5:19:41 AM 17 NotApplicable Store Healthy 5/22/2014
5:19:43 AM 225 NotApplicable MSExchangeCertificateDeplo... Disabled 1/1/0001 12:00:00 AM 2 NotApplicable DAL Healthy 8/2/2013 12:59:03 AM 16 NotApplicable Search Healthy 5/22/2014 5:37:18 AM 269 Online EWS.Proxy Healthy 5/5/2014 1:34:08 AM 1 Online RPS.Proxy
Healthy 5/5/2014 1:34:38 AM 13 Online OAB.Proxy Healthy 5/5/2014 1:34:37 AM 1 Online ECP.Proxy Healthy 5/5/2014 1:34:17 AM 4 Online OWA.Proxy Healthy 5/5/2014 1:34:25 AM 2 Online Outlook.Proxy Healthy 5/5/2014 1:34:08 AM 1 Online Autodiscover.Proxy Healthy
5/5/2014 1:34:08 AM 1 Online ActiveSync.Proxy Healthy 5/5/2014 1:34:35 AM 1 Online RWS.Proxy Healthy 5/5/2014 1:34:18 AM 10 NotApplicable Autodiscover Healthy 5/21/2014 10:24:01 PM 2 Online FrontendTransport Healthy 5/15/2014 12:49:31 AM 11 NotApplicable EWS
Unhealthy 5/22/2014 7:06:01 AM 2 NotApplicable OWA Healthy 2/23/2014 11:37:56 PM 1 NotApplicable Outlook Healthy 3/8/2014 12:45:14 AM 5 Online UM.CallRouter Healthy 5/22/2014 5:19:41 AM 7 NotApplicable RemoteMonitoring Healthy 8/2/2013 12:58:03 AM 1 NotApplicable
POP.Protocol Healthy 5/20/2014 9:22:12 AM 5 NotApplicable IMAP.Protocol Healthy 5/20/2014 9:22:21 AM 5 Online POP.Proxy Healthy 3/7/2014 1:31:10 PM 1 Online IMAP.Proxy Healthy 3/7/2014 1:31:10 PM 1 NotApplicable IMAP Healthy 5/20/2014 9:23:32 AM 2 NotApplicable
POP Healthy 5/20/2014 9:17:18 AM 2 NotApplicable Antimalware Healthy 5/15/2014 8:33:13 AM 8 NotApplicable FfoQuarantine Healthy 8/2/2013 12:58:20 AM 1 Online Transport Healthy 5/22/2014 5:38:00 AM 9 NotApplicable Security Healthy 3/8/2014 12:46:09 AM 3 NotApplicable
Datamining Healthy 3/8/2014 12:45:44 AM 3 NotApplicable Provisioning Healthy 3/8/2014 12:45:40 AM 3 NotApplicable ProcessIsolation Healthy 3/8/2014 12:47:05 AM 12 NotApplicable TransportSync Healthy 3/8/2014 12:45:37 AM 3 NotApplicable MessageTracing Healthy
3/8/2014 12:44:56 AM 3 NotApplicable CentralAdmin Healthy 3/8/2014 12:45:12 AM 3 NotApplicable OAB Healthy 8/2/2013 1:02:27 AM 3 NotApplicable Calendaring Healthy 8/2/2013 1:02:07 AM 3 NotApplicable PushNotifications.Protocol Healthy 2/23/2014 10:46:17 PM
3 NotApplicable Ediscovery.Protocol Healthy 5/21/2014 10:38:16 PM 1 NotApplicable HDPhoto Healthy 5/6/2014 9:36:25 AM 1 NotApplicable Clustering Healthy 3/8/2014 12:45:34 AM 4 NotApplicable DiskController Healthy 4/22/2014 2:51:30 AM 1 NotApplicable MailboxSpace
Healthy 5/22/2014 6:16:51 AM 96 NotApplicable FreeBusy Healthy 5/22/2014 5:32:54 AM 1 Note: Subsequent detected alerts are suppressed until the health set is healthy again.

Hi,
Based on the error message, throttling rejected the operation. I recommend you use the Get-ThrottlingPolicy | fl cmdlet to view EWS settings in throttling policy.
You can modify the default throttling policy and set the basic settings for EWS. Then restart the Microsoft Exchange Throttling service and recycle the MSExchangeServicesAppPool to check the result.
For more information about the EWS throttling, you can refer to the following articles.
EWS throttling in Exchange
http://msdn.microsoft.com/en-us/library/office/jj945066(v=exchg.150).aspx
EWS Best Practices: Understand Throttling Policies
http://blogs.msdn.com/b/mstehle/archive/2010/11/09/ews-best-practices-understand-throttling-policies.aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

WSUS on server 2012 fails to open

I successfully installed WSUS role on server 2012 R2 and pointed its database to SQL 2012 during installation. I was prompted to specify the instance name, but since the sql is installed on the same server I entered the server name as was able to verify
the connection. Database was successfully created in SQL, but when I try to open WSUS console, it opens up but does not connect to its service.
Came across someone else's post with a similar problem, but using wsusutil.exe postinstall SQL_INSTANCE_NAME=<database server name> fails.
http://blogs.technet.com/b/reshard_sharps_blog/archive/2013/08/18/wsus-post-deployment-configuration-fails.aspx
I didn't specify CONTENT_DIR=C:\Wsus as I don't want to store updates locally until additional storage becomes available.
PS C:\Program Files\Update Services\tools> .\WsusUtil.exe postinstall SQL_INSTANCE_NAME=W2012\mssqlserver
Log file is located at C:\Users\Administrator\AppData\Local\Temp\2\tmpC758.tmp
Post install is starting Fatal Error: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured
to allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)

2014-03-31 16:40:46 Importing SQLServer.xml...
2014-03-31 16:40:46 Importing WindowsXP64BitEditionVersion2003.xml...
2014-03-31 16:40:46 Importing DefinitionUpdateSusXml.xml...
2014-03-31 16:40:46 Importing ClientServicingApiDetectoid.xml...
2014-03-31 16:40:46 Importing default detectoids succeeded.
2014-03-31 16:40:48 Synchronization in progress. Please cancel synchronization and rerun postinstall again. Exception: System.Net.WebException: The request failed with HTTP status 503: Service Unavailable.
 at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
 at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
 at Microsoft.UpdateServices.Internal.ApiRemoting.GetServerVersion()
 at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.GetServerVersion()
 at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.CreateUpdateServer(String serverName, Boolean useSecureConnection, Int32 portNumber)
 at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer..ctor(Boolean bypassApiRemoting)
 at Microsoft.UpdateServices.Setup.StartServer.StartServer.FixSubscriptionCategories()
2014-03-31 16:40:48 StartServer encountered errors. Exception=Synchronization in progress. Please cancel synchronization and run postinstall again.
2014-03-31 16:40:48 Microsoft.UpdateServices.Administration.CommandException: Failed to start and configure the WSUS service
 at Microsoft.UpdateServices.Administration.PostInstall.Run()
 at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)

Migration status Failed

Hi
I migrate from Exchange 2007 to 2013
I move all mailboxes (1400mailbox) without any issue except 1 mailbox .
From Ecp i cannot see any failed report to identify what was the issue .
when i try to moving from EMS snd i check the status it is showing status fail .
how can i monitor and identify what was the issue to be able moving the last mailbox
MCP MCSA MCSE MCT MCTS CCNA

1/28/2015 11:24:55 AM [EXCHMBXSRV3] Connected to
source mailbox
'3e8c59f6-eb99-4fcb-8fc2-0133ee2451a8 (Primary)', database
'heiscomail\HEISCOSG500-01\HEISCODB500-01', Mailbox server
                                        'HEISCOMAIL.CORP.NET'
Version 8.3 (Build 348.0).
1/28/2015 11:24:56 AM [EXCHMBXSRV3] Request processing started.
1/28/2015 11:24:56 AM [EXCHMBXSRV3] Source mailbox information:
Regular Items: 98, 44.49 MB (46,653,429 bytes)
Regular Deleted Items: 0, 0 B (0 bytes)
FAI Items: 66, 0 B (0 bytes)
FAI Deleted Items: 0, 0 B (0 bytes)
1/28/2015 11:24:56 AM [EXCHMBXSRV3] Cleared sync state for request
3e8c59f6-eb99-4fcb-8fc2-0133ee2451a8 due to 'CleanupOrphanedMailbox'.
1/28/2015 11:24:56 AM [EXCHMBXSRV3] An old copy of the mailbox was removed
from the destination database. The operation will try again in 30 seconds.
1/28/2015 11:25:30 AM [EXCHMBXSRV3] Mailbox signature will not be preserved
for mailbox '3e8c59f6-eb99-4fcb-8fc2-0133ee2451a8 (Primary)'. Outlook clients
will need to restart to access the moved mailbox.
1/28/2015 11:25:31 AM [EXCHMBXSRV3] Stage: CreatingFolderHierarchy. Percent
complete: 10.
1/28/2015 11:25:31 AM [EXCHMBXSRV3] Initializing folder hierarchy from
mailbox '3e8c59f6-eb99-4fcb-8fc2-0133ee2451a8 (Primary)': 30 folders total.
1/28/2015 11:25:31 AM [EXCHMBXSRV3] Folder creation progress: 0 folders
created in mailbox '3e8c59f6-eb99-4fcb-8fc2-0133ee2451a8 (Primary)'.
                                         1/28/2015
11:25:31 AM [EXCHMBXSRV3] Folder hierarchy initialized for mailbox
'3e8c59f6-eb99-4fcb-8fc2-0133ee2451a8 (Primary)': 29 folders created.
         1/28/2015 11:25:31 AM [EXCHMBXSRV3] Stage: CreatingInitialSyncCheckpoint.
Percent complete: 15.
1/28/2015 11:25:31 AM [EXCHMBXSRV3] Initial sync checkpoint progress: 0/30
folders processed. Currently processing mailbox
'3e8c59f6-eb99-4fcb-8fc2-0133ee2451a8 (Primary)'.
1/28/2015 11:25:31 AM [EXCHMBXSRV3] Initial sync checkpoint completed: 27
folders processed.
1/28/2015 11:25:31 AM [EXCHMBXSRV3] Stage: LoadingMessages. Percent complete:
         20.
1/28/2015 11:25:32 AM [EXCHMBXSRV3] Messages have been enumerated
successfully. 149 items loaded. Total size: 37.05 MB (38,849,527 bytes).
                                         1/28/2015
11:25:32 AM [EXCHMBXSRV3] Stage: CopyingMessages. Percent complete:
25.
1/28/2015 11:25:32 AM [EXCHMBXSRV3] Copy progress: 0/149 messages, 0 B (0
bytes)/37.05 MB (38,849,527 bytes), 10/30 folders completed.
1/28/2015 11:25:47 AM [EXCHMBXSRV3] Copying messages is complete. Copying
   rules and security descriptors.
1/28/2015 11:25:48 AM [EXCHMBXSRV3] Initial seeding completed, 149 items
copied, total size 37.05 MB (38,849,527 bytes).
                                         1/28/2015
11:25:48 AM [EXCHMBXSRV3] Stage: IncrementalSync. Percent complete:
95.
1/28/2015 11:25:48 AM [EXCHMBXSRV3] Folder hierarchy changes reported in
source '3e8c59f6-eb99-4fcb-8fc2-0133ee2451a8 (Primary)': 0 changed folders, 0
deleted folders.
1/28/2015 11:25:48 AM [EXCHMBXSRV3] Incremental Sync
'3e8c59f6-eb99-4fcb-8fc2-0133ee2451a8 (Primary)' completed: 0 hierarchy
updates, 0 content changes.
1/28/2015 11:25:48 AM [EXCHMBXSRV3] Stage: IncrementalSync. Percent complete:
95.
1/28/2015 11:25:48 AM [EXCHMBXSRV3] Final sync has started.
1/28/2015 11:25:58 AM [EXCHMBXSRV3] Folder hierarchy changes reported in
source '3e8c59f6-eb99-4fcb-8fc2-0133ee2451a8 (Primary)': 0 changed folders, 1
deleted folders.
1/28/2015 11:25:58 AM [EXCHMBXSRV3] Incremental Sync
'3e8c59f6-eb99-4fcb-8fc2-0133ee2451a8 (Primary)' completed: 1 hierarchy
updates, 0 content changes.
1/28/2015 11:25:58 AM [EXCHMBXSRV3] Source mailbox information:
Regular Items: 98, 44.49 MB (46,653,429 bytes)
Regular Deleted Items: 0, 0 B (0 bytes)
FAI Items: 66, 0 B (0 bytes)
FAI Deleted Items: 0, 0 B (0 bytes)
                                         1/28/2015
11:25:58 AM [EXCHMBXSRV3] Stage: FinalIncrementalSync. Percent
complete: 95.
1/28/2015 11:25:59 AM [EXCHMBXSRV3] Mailbox store finalization is complete.
1/28/2015 11:25:59 AM [EXCHMBXSRV3] SessionStatistics updated.
1/28/2015 11:25:59 AM [EXCHMBXSRV3] Verifying mailbox contents...
                                         1/28/2015
11:25:59 AM [EXCHMBXSRV3] A missing item was encountered: Missing
Item (IPM.Note) Subject:"RE: Daily Report 12-12-2014", Folder:"Outbox"
1/28/2015 11:25:59 AM [EXCHMBXSRV3] A missing item was encountered: Missing
Item (IPM.Note) Subject:"MOWAD CIVIL ID", Folder:"Outbox"
1/28/2015 11:25:59 AM [EXCHMBXSRV3] A missing item was encountered: Missing
Item (IPM.Note) Subject:"RE:   Daily Report 02-12-2014", Folder:"Outbox"
1/28/2015 11:25:59 AM [EXCHMBXSRV3] A missing item was encountered: Missing
Item (IPM.Note) Subject:"CRANE CHARGE", Folder:"Outbox"
1/28/2015 11:25:59 AM [EXCHMBXSRV3] A missing item was encountered: Missing
Item (IPM.Note) Subject:"2296 attachment", Folder:"Outbox"
1/28/2015 11:25:59 AM [EXCHMBXSRV3] A missing item was encountered: Missing
Item (IPM.Note) Subject:"PPEP FOR KNPW NEW REFINERY PACKAGES", Folder:"Outbox"
1/28/2015 11:25:59 AM [EXCHMBXSRV3] A missing item was encountered: Missing
Item (IPM.Note) Subject:"Concrete Quantity 30-10-2014", Folder:"Outbox"
1/28/2015 11:25:59 AM [EXCHMBXSRV3] A missing item was encountered: Missing
                                         Item
(IPM.Note) Subject:"NCR REMINDER B-61", Folder:"Outbox"
1/28/2015 11:25:59 AM [EXCHMBXSRV3] A missing item was encountered: Missing
Item (IPM.Note) Subject:"Emailing: gate pass.pdf", Folder:"Outbox"
1/28/2015 11:25:59 AM [EXCHMBXSRV3] A missing item was encountered: Missing
Item (IPM.Note) Subject:" Concrete Quantity 29-09-2014", Folder:"Outbox"
1/28/2015 11:25:59 AM [EXCHMBXSRV3] A missing item was encountered: Missing
Item (IPM.Note) Subject:"WORKING SCHEDULE- EID AL ADHA", Folder:"Outbox"
1/28/2015 11:25:59 AM [EXCHMBXSRV3] Mailbox contents verification complete:
27 folders, 160 items, 44.49 MB (46,652,893 bytes).
        1/28/2015 11:25:59 AM [EXCHMBXSRV3] Stage: FinalIncrementalSync. Percent
complete: 95.
1/28/2015 11:25:59 AM [EXCHMBXSRV3] Fatal error
          TooManyMissingItemsPermanentException has occurred.
ObjectState                            : New
[PS] C:\Windows\system32>
MCP MCSA MCSE MCT MCTS CCNA

Unable to install 2nd SCOM 2012 Management Server - Services Fails and fails trying to get data reader writer accounts?

2nd Management Server Setup fails at "Data Warehouse Configuration".
error log:
[12:33:20]: Always: :Current Action: StartServices
[12:33:20]: Always: :Starting OM Services.
[12:33:20]: Debug: :StartService: attempting to start service OMSDK
[12:33:50]: Error: :StartService: Could not get service status.: Threw Exception.Type: System.InvalidOperationException, Exception Error Code: 0x80131509, Exception.Message:
Cannot start service OMSDK on computer '.'.
[12:33:50]: Error: :StackTrace: at System.ServiceProcess.ServiceController.Start(String[] args)
 at Microsoft.SystemCenter.Essentials.SetupFramework.ServiceControlFunctions.StartService(String serviceName)
[12:33:50]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131509, Exception.Message: The service did not respond to the start
or control request in a timely fashion
[12:33:50]: Error: :InnerException.StackTrace:
[12:34:51]: Error: :StartService: Could not get service status.: Threw Exception.Type: System.InvalidOperationException, Exception Error Code: 0x80131509, Exception.Message:
Cannot start service OMSDK on computer '.'.
[12:34:51]: Error: :StackTrace: at System.ServiceProcess.ServiceController.Start(String[] args)
 at Microsoft.SystemCenter.Essentials.SetupFramework.ServiceControlFunctions.StartService(String serviceName)
[12:34:51]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131509, Exception.Message: The service did not respond to the start
or control request in a timely fashion
[12:34:51]: Error: :InnerException.StackTrace:
[12:35:55]: Error: :StartService: Could not get service status.: Threw Exception.Type: System.InvalidOperationException, Exception Error Code: 0x80131509, Exception.Message:
Cannot start service OMSDK on computer '.'.
[12:35:55]: Error: :StackTrace: at System.ServiceProcess.ServiceController.Start(String[] args)
 at Microsoft.SystemCenter.Essentials.SetupFramework.ServiceControlFunctions.StartService(String serviceName)
[12:35:55]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131509, Exception.Message: The service did not respond to the start
or control request in a timely fashion
[12:35:55]: Error: :InnerException.StackTrace:
[12:36:32]: Error: :StartService: Could not get service status.: Threw Exception.Type: System.InvalidOperationException, Exception Error Code: 0x80131509, Exception.Message:
Cannot start service OMSDK on computer '.'.
[12:36:32]: Error: :StackTrace: at System.ServiceProcess.ServiceController.Start(String[] args)
 at Microsoft.SystemCenter.Essentials.SetupFramework.ServiceControlFunctions.StartService(String serviceName)
[12:36:32]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131509, Exception.Message: The service did not respond to the start
or control request in a timely fashion
[12:36:32]: Error: :InnerException.StackTrace:
[12:37:36]: Error: :StartService: Could not get service status.: Threw Exception.Type: System.InvalidOperationException, Exception Error Code: 0x80131509, Exception.Message:
Cannot start service OMSDK on computer '.'.
[12:37:36]: Error: :StackTrace: at System.ServiceProcess.ServiceController.Start(String[] args)
 at Microsoft.SystemCenter.Essentials.SetupFramework.ServiceControlFunctions.StartService(String serviceName)
[12:37:36]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131509, Exception.Message: The service did not respond to
the start or control request in a timely fashion
[12:37:36]: Error: :InnerException.StackTrace:
[12:38:12]: Error: :StartService: Could not get service status.: Threw Exception.Type: System.InvalidOperationException, Exception Error Code: 0x80131509, Exception.Message:
Cannot start service OMSDK on computer '.'.
[12:38:12]: Error: :StackTrace: at System.ServiceProcess.ServiceController.Start(String[] args)
 at Microsoft.SystemCenter.Essentials.SetupFramework.ServiceControlFunctions.StartService(String serviceName)
[12:38:12]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131509, Exception.Message: The service did not respond to
the start or control request in a timely fashion
[12:38:12]: Error: :InnerException.StackTrace:
[12:41:19]: Error: :StartService: Unable to start the service OMSDK after 3 minutes.
[12:41:19]: Warn: :Warning:OMSDK service could not be started
[12:41:19]: Debug: :StartService: attempting to start service healthservice
[12:41:19]: Debug: :StartService: Able to start the service healthservice after 0 minutes.
[12:41:19]: Debug: :StartService: attempting to start service cshost
[12:41:19]: Debug: :StartService: Able to start the service cshost after 0 minutes.
[12:41:19]: Info: :StartServices completed.
[12:41:19]: Always: :Current Action: GetDataReaderWriterAccounts
[12:41:22]: Error: :GetDataReaderWriterAccounts failed with the following exception: : Threw Exception.Type: System.Reflection.TargetInvocationException, Exception
Error Code: 0x80131604, Exception.Message: Exception has been thrown by the target of an invocation.
[12:41:22]: Error: :StackTrace: at System.RuntimeMethodHandle._InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, SignatureStruct&
sig, MethodAttributes methodAttributes, RuntimeType typeOwner)
 at System.RuntimeMethodHandle.InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeType typeOwner)
 at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
 at System.Delegate.DynamicInvokeImpl(Object[] args)
 at Microsoft.EnterpriseManagement.SetupFramework.ActionEngine.Action.Run(String displayStringNamespace, ProgressData progressData, Func`2 progressDelegate)
 at Microsoft.EnterpriseManagement.SetupFramework.ActionEngine.InstallStep.Run(String displayStringNamespace, ProgressData progressData, Func`2 progressDelegate)
[12:41:22]: Error: :Inner Exception.Type: Microsoft.EnterpriseManagement.Common.ServiceNotRunningException, Exception Error Code: 0x80131604, Exception.Message: The Data
Access service is either not running or not yet initialized. Check the event log for more information.
[12:41:22]: Error: :InnerException.StackTrace: at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
 at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
 at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
 at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
 at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
 at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
 at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.GetDWWriterAccountFromManagementGroup(String managementServerName, String& userName, String& userDomain)
 at Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.OMDataWarehouseProcessor.GetDataReaderWriterAccounts()
[12:41:22]: Error: :Inner Exception.Type: System.ServiceModel.EndpointNotFoundException, Exception Error Code: 0x80131604, Exception.Message: Could not connect to net.tcp://localhost:5724/DispatcherService.
The connection attempt lasted for a time span of 00:00:00.9950000. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:5724.
[12:41:22]: Error: :InnerException.StackTrace:
Server stack trace:
 at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
 at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
 at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
 at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
 at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
 at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
 at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
 at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
 at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
 at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
 at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
 at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
 at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
 at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
 at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
 at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
 at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
 at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
[12:41:22]: Error: :Inner Exception.Type: System.Net.Sockets.SocketException, Exception Error Code: 0x80131604, Exception.Message: No connection could be made because the
target machine actively refused it 127.0.0.1:5724
[12:41:22]: Error: :InnerException.StackTrace: at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
 at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
 at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
[12:41:22]: Error: :FATAL ACTION: GetDataReaderWriterAccounts
[12:41:22]: Error: :FATAL ACTION: DWInstallActionsPostProcessor
[12:41:22]: Error: :ProcessInstalls: Running the PostProcessDelegate returned false.
[12:41:22]: Always: :SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse Configuration
[12:41:22]: Error: :ProcessInstalls: Running the PostProcessDelegate for OMDATAWAREHOUSE failed.... This is a fatal item. Setting rollback.
[12:41:22]: Info: :SetProgressScreen: FinishMinorStep.
[12:41:22]: Always: :!***** Installing: POSTINSTALL ***
[12:41:22]: Info: :ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
[12:41:22]: Always: :****************************************************************
[12:41:22]: Always: :****Starting*RollBack*******************************************
[12:41:22]: Always: :****************************************************************

Hi,
Pls ensure there is no firewall in between DB, DW and MS or required ports are open and you have permission on DW for the account being used for installation.
http://technet.microsoft.com/en-us/library/hh298609.aspx
http://technet.microsoft.com/library/hh205990.aspx supported configuration
Thanks,
Varun

Connection to [i]server[/i] failed (Error NT_STATUS_IO_TIMEOUT)

Hi there,
I'm a long time linux user (casual) and have recently got hold of a machine that I am using as a server. I am able to SSH into this fine from my laptop and I am doing all the setup from ssh.
I am trying to set it up so I can use Samba, however keep getting the following error
# smbclient -L [i]server[/i] -U%
Connection to [i]server[/i] failed (Error NT_STATUS_IO_TIMEOUT)
I thought I had followed the samba set up wiki to the letter
My smb.conf looks like so
[global]
usershare path = /var/lib/samba/usershare
usershare max shares = 100
usershare allow guests = yes
usershare owner only = false
# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = MYGROUP
# server string is the equivalent of the NT Description field
server string = Samba Server
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
printcap name = /etc/printcap
load printers = yes
# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
; printing = bsd
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = user
# Use password server option only with security = server
; password server = <NT-Server-Name>
# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; username level = 8
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
; encrypt passwords = yes
; smb passwd file = /etc/samba/smbpasswd
# The following are needed to allow password changing from Windows to
# update the Linux sytsem password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
; unix password sync = Yes
; passwd program = /usr/bin/passwd %u
; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *pass$
# Unix users can map to different SMB User names
; username map = /etc/samba/smbusers
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Use only if you have an NT server on your network that has been
# configured at install time to be a primary domain controller.
; domain controller = <NT-Domain-Controller-SMBName>
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no
#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = yes
writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /home/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /home/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to print
guest ok = no
writable = no
printable = yes
[i]<everything else is commented out>[/i]
I have no windows machines so it's only my laptop and desktop both running linux that I need to connect to this. I have tried googling and searching these forums to no avail
Thanks for any help that can be offered
Mike

If I run the following (on the machine I'm trying to set up the share)
smbclient -L localhost -U%
I got the following output
Connection to localhost failed (Error NT_STATUS_CONNECTION_REFUSED)
so I thought it might be something incorrect with the iptables side of things, however I haven't really touched that at all and it seems to look correct
iptables -nvL
Chain INPUT (policy ACCEPT 667 packets, 79977 bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 157 packets, 20724 bytes)
pkts bytes target prot opt in out source destination
So from my (very little) knowledge this appears correct (I think)... However it appears that something is blocking access somewhere.

Virtual Machine Failes to Start: Server execution failed (0x80080005).

Hi
I have a Windows 8.1 (with updates) System which was upgraded from Windows 8.0 using a Clean Install. Recently Hyper-V has stopped running on my system.
The Event log shows an error:
'CentOS65' failed to start worker process: Server execution failed (0x80080005). (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)
-    System
-    Provider
           [ Name]    Microsoft-Windows-Hyper-V-VMMS
           [ Guid]    {6066F867-7CA1-4418-85FD-36E3F9C0600C}
   EventID    15500
   Version    0
   Level    2
   Task    0
   Opcode    0
   Keywords    0x8000000000000000
-    TimeCreated
           [ SystemTime]    2014-07-17T07:57:28.568965100Z
   EventRecordID    302
   Correlation
-    Execution
           [ ProcessID]    4040
           [ ThreadID]    1396
   Channel    Microsoft-Windows-Hyper-V-VMMS-Admin
   Computer    viveksasmung
-    Security
           [ UserID]    S-1-5-18
-    UserData
-    VmlEventLog
   VmName    CentOS65
   VmId    9EF5529D-3755-40B3-AC6A-325A564D19BB
   ErrorMessage    %%2148007941
   ErrorCode    0x80080005
The WMI-Activity log shows the error:
Id = {00000000-0000-0000-0000-000000000000}; ClientMachine = VIVEKSASMUNG; User = viveksasmung\Vivek; ClientProcessId = 9756; Component = Core; Operation = Start IWbemServices::ExecNotificationQuery - root\virtualization\v2 : select * from __InstanceDeletionEvent
within 2 where TargetInstance ISA 'Msvm_ComputerSystem' ; ResultCode = 0xC7F0FCD0; PossibleCause = Could not send status to client
The Hyper-V-VMMS Admin Log shows the error:
The worker process for virtual machine 'CentOS65' failed to respond within the startup timeout period and was restarted. (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)
'CentOS65' failed to start. (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)
The Hyper-V Worker Log shows the error:
The Virtual Machine Worker Process has lost its connection to the root\virtualization WMI namespace: General access denied error (0x80070005). As a result, some WMI operations may not function correctly. To correct the problem, try restarting the Windows
Management Instrumentation service.
I set the Hyper-V Tracing to ON using vmconnect.config
file and the error log is as follows:
Tracing Hyper-V Client version: 6.3.0.0. Rough build date (virtman file written): 05/18/2014 23:25:02
2014-07-17 01:55:28.990 [08] USER_ACTION_INITIATED VMBrowser ServerNode:ConnectToServer() Connecting to server localhost...
2014-07-17 01:55:29.008 [08] USER_ACTION_COMPLETED VMBrowser ServerNode:ConnectToServer() Successfully connected to server.
2014-07-17 01:55:29.463 [07] WARNING VirtMan WmiAssociation:GetRelatedObjects() The WMI object 'Msvm_RdvComponentSettingData' + could not be mapped to VirtMan type so ignore it.
2014-07-17 01:55:33.001 [03] USER_ACTION_INITIATED VMBrowser ServerNodeViewControl:OnStartVm() Starting VM(s)...
2014-07-17 01:55:33.023 [09] USER_ACTION_INITIATED VMBrowser VMActionBatchPerformer:Perform() Changing virtual machine '9EF5529D-3755-40B3-AC6A-325A564D19BB' ('CentOS65') state from 'PowerOff' to 'Running'
2014-07-17 01:59:33.927 [12] ERROR VirtMan ThrowHelper:ThrowVirtualizationOperationFailedException() Operation 'SetState' failed with message ''CentOS65' failed to start.'.
    Error code '32768'.
    Detailed message ''CentOS65' failed to start. (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)
'CentOS65' failed to start worker process: Server execution failed (0x80080005). (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)'.
2014-07-17 01:59:33.930 [12] ERROR VMBrowser VMActionBatchPerformer:OnTaskCompleted() Tracked task operation failed!
    'CentOS65' failed to start.
       at Microsoft.Virtualization.Client.Management.ThrowHelper.ThrowVirtualizationOperationFailedException(String errorMsg, String errorDescriptionMsg, VirtualizationOperation operation, Int64 errorCode, Boolean operationCanceled,
ErrorCodeMapper mapper, Exception innerException)
   at Microsoft.Virtualization.Client.Management.View.EndMethodReturnInternal(IVMTask task, VirtualizationOperation operation, Boolean affectedElementExpected)
   at Microsoft.Virtualization.Client.Management.VMComputerSystemBaseView.EndSetState(IVMTask setStateTask)
   at Microsoft.Virtualization.Client.VMBrowser.ChangeVMStatePerformer.EndTrackedTask(IVMTask task)
   at Microsoft.Virtualization.Client.VMBrowser.VMActionBatchPerformer.OnTaskCompleted(Object sender, EventArgs e)
2014-07-17 01:59:46.103 [03] USER_ACTION_INITIATED VMBrowser ServerNode:DisconnectFromServer() Disconnecting from server localhost...
2014-07-17 01:59:46.104 [03] USER_ACTION_COMPLETED VMBrowser ServerNode:DisconnectFromServer() Server had been disconnected successfully.
Upon using BCDEdit, output is below
Windows Boot Manager
identifier              {bootmgr}
device                  partition=\Device\HarddiskVolume1
path                    \bootmgr
description             Windows Boot Manager
locale                  en-GB
default                 {current}
resumeobject            {37225af7-cc62-11e3-8277-806e6f6e6963}
displayorder            {current}
                        {3ce506e4-cc90-11e3-8b9f-8a809d5a6432}
timeout                 30
Windows Boot Loader
identifier              {current}
device                  partition=C:
path                    \Windows\system32\winload.exe
description             Windows 8.1 Pro with Media Center
locale                  en-GB
recoverysequence        {3ce506df-cc90-11e3-8b9f-8a809d5a6432}
recoveryenabled         Yes
osdevice                partition=C:
systemroot              \Windows
resumeobject            {37225af7-cc62-11e3-8277-806e6f6e6963}
bootmenupolicy          Legacy
hypervisorlaunchtype    Auto
quietboot               No
Real-mode Boot Sector
identifier              {3ce506e4-cc90-11e3-8b9f-8a809d5a6432}
device                  partition=C:
path                    \Hd0Par3.pbr
description             Ubuntu LTS 14.04
I have set permissions to the VHD folder using the command below
icacls "c:\CentOS65\CentOS65" /grant "CREATOR OWNER":(OI)(CI)(IO)F
icacls "c:\CentOS65\CentOS65" /grant "NT AUTHORITY\SYSTEM":(OI)(CI)F
icacls "c:\CentOS65\CentOS65" /grant "NT VIRTUAL MACHINE\Virtual Machines":(RC,S,GR,RD,WD,AD,REA,RA)
icacls "c:\CentOS65\CentOS65" /grant "NT VIRTUAL MACHINE\Virtual Machines":(CI)(IO)(GR,WD,AD)
icacls "c:\CentOS65\CentOS65\Virtual Hard Disks" /grant "NT VIRTUAL MACHINE\Virtual Machines":(RC,S,GR,RD,WD,AD,REA,RA)
icacls "c:\CentOS65\CentOS65\Virtual Hard Disks" /grant "NT VIRTUAL MACHINE\Virtual Machines":(CI)(IO)(GR,WD,AD)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOSHome.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOS65.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOSHome_9E7FEF2E-85E0-4278-AABD-01D5E45EE643.avhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOS65_28FF0E50-0FBA-4754-A4CC-B3DAEC7E3DAA.avhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOSHome.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOS65.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOS65.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(F)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOSHome.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(F)
icacls "C:\CentOS65\CentOS65\Virtual Machines\9EF5529D-3755-40B3-AC6A-325A564D19BB.xml" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(F)
I am unable to create new VMs as well.
I have already run
sfc/ scannow
DISM
Already Tried disabling the antivirus
Upon using wbemtest and connecting to root\virtualization, I am able to click Enum Classes > Recursive
Kindly suggest how to get HyperV working please. Any help (short of reinstalling /resetting windows) would be much appreciated.
Warm Regards,
Dr Vivek Gupta

Hi,
The key point would be this:
The Virtual Machine Worker Process has lost its connection to the root\virtualization WMI namespace: General access denied error (0x80070005).
Please open MMC, add Component Services snap-in:
Component Services -> Computers -> My Computer -> DCOM Config -> Windows Management Instrumentation -> Right Click, Properties -> Security “Launch and Activation Permission” -> Edit -> gave Authenticated Users
Full Control
Check the result.
Alex Zhao
TechNet Community Support

The server is failing to download some updates. Event ID 10032 (ran out of disk space & extended volume, still got error)

On Friday, 9/17 @ 7 am, after deselecting Windows 2003 in products, I ran Server Cleanup Wizard (as well as sqlcmd -I -i"WsusDBMaintenance.sql" -S "np:\\.\pipe\MSSQL$MICROSOFT##SSEE\sql\query"), and 0 bytes were freed which I thought
odd.   I then selected Windows Server 2012 R2 and Office 2013 since we're going to be using those.
After this, on 9/19 @ 7:30am, the server had the message:      Event 364 Content file download failed. Reason: There is not enough space on the disk.    Source File: /d/msdownload/update/software/secu/2014/04/coreservermui-it-it_ebb7e1e8d487b90ffd719f06122a3db947b3f949.cab
Destination File: e:\WSUS\WsusContent\49\EBB7E1E8D487B90FFD719F06122A3DB947B3F949.cab.
At some time during the day on 9/19, our SAN admin increased the volume (all server's volumes are on a SAN) from the SAN end, and I extended it in Disk Mngmt on the WSUS server.   I went home for the weekend
I came back today (9/22), saw I had gotten the "the server is failing to download some updates. Event ID 10032"   on Saturday 9/20 @ 1:30am.   I checked the volume \WSUScontent is on (the volume we extended) and it has
17GB free. So I assume space should not still be an issue.
The same 10032 error had occurred on 9/19, at 1:30 pm, but I assume it was before my colleague and I bumped up the disk space. But why it occurred again the next day I'm not sure.
However, since the 10032 error on 9/20 @ 1:30am, it has not reoccured, and no yellow or red event messages. So possibly all is well now. Could it have been that WSUS was being sluggish to recognize the increased disk space, even though Windows
itself recognized it?

Thanks Lawrence, I went through the steps you instruct on (which I did not know about, so I greatly appreciate that!), and freed up over 30GB of space.
Outstanding! :-)
But your steps don't really address deleting all (solely) 2003 updates.
Correct. First, because you cannot DELETE updates, unless they are expired or old revisions, and use the Server Cleanup Wizard to do that.
Second, because the article was about removing *unneeded* updates. It does not consider the scenario where a product category is being retired
When I go to my "2003" update view, sorting by Any Except Declined, and Status Any, I still see tons of 2003 ones, some solely for it, others that apply to 2003 and other OSs. I want to leave the latter, but delete the ones solely for
2003. Not just superseded ones, but ALL that are solely for 2003.
You cannot delete updates. You can DECLINE updates, if that's what you want to do.
So let's talk a minute about these updates that might be applicable to operating systems other than Windows Server 2003. Let's be practical about the other operating systems listed. If you look closely, I suspect you will discover that those "other
operating systems" are either Windows XP or Windows 2000, but nothing else. Do updates for Windows XP or Windows 2000 really matter to you? I suspect not.
The reason I highly suspect this is because the practice of building packages targeted at multiple operating systems was terminated when Windows Vista was released (actually I think it happened with the release of WSUS v3, but this is just a matter of trivia,
the relevant point is that it's not done anymore, and has not been done for many years).
Ergo, I know for a fact, that NONE of the updates applicable for Windows Server 2003, will be applicable for any newer operating system. Ergo, it probably doesn't matter at all, so just SelectAll -> Decline if that's what you want to do.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Database Services Engine Failed, SQL Server Replication Failed, Full Text Search Failed, Reporting Services Failed

Hello,
I am trying to install Microsoft SQL Server 2008 R2. I get the error bellow (Database Services Engine Failed, SQL Server Replication Failed, Full Text Search Failed, Reporting Services Failed). I already have a copy of SQL Server 2008 R2 on the machine.
I want to create a new named instance of SQL Server for some software I'm installing.
The error is below.
Any help would be much appreciated, thanks!
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -595541211
Exit facility code: 1152
Exit error code: 49957
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-02-06 09:14:09
End time: 2014-02-06 11:18:16
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.2500.0%26EvtType%3d0x44D4F75E%400xDC80C325
Machine Properties:
Machine name: BAHPBZ52TY
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 R2 SQLEXPRESS MSSQL10_50.SQLEXPRESS Database Engine Services
1033 Express Edition 10.50.1600.1 No
Sql Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.50.1600.1 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: c:\c7ced2c86d6b9813b28186cc831c2054\x64\setup\
Installation edition: EXPRESS_ADVANCED
Slipstream: True
SP Level 1
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE:
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,RS,SSMS,SNAC_SDK,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: c:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: aedt2bSQL
INSTANCENAME: AEDT2BSQL
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: c:\c7ced2c86d6b9813b28186cc831c2054\PCUSOURCE
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: BAH\568385
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\SystemConfigurationCheck_Report.htm

Hello,
If you see error descriptioon it gives access denied so basically it is because of some access issue.I guess You must be using some domin account for installation make sure it is added as local administrator also instead of using NT Authority network
service as SQL server service account use local system account .
Below link would help
http://serverfault.com/questions/212135/access-is-denied-error-installing-sql-server-2008-on-windows-7
You can also browse to setup.exe file and RK on it and select run as administrator
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Store server status....failed

Similar Messages

Maybe you are looking for