Stored Procedure VARCHAR2 Out Parameters NULL.

Hi,
I'm having a problem. I'm calling a stored procedure with 2 number out parametes and 2 varchar2 out parameters. The number out parameters have values, but the varchar2 out parameters seem to be null after a call to the procedure. I'm using VC++ 6.0 and Provider 9.2.0.2
Naveen

Did you specify the size for OUT Varchar2 parameters? Note that you need to specify the size for variable sized data types but not for fixed sized data types.

Similar Messages

URGENT!!! a way to find out if Oracle stored procedures have OUT parameters

I'm having problemes properly creating a string for the prepareCall().
so that i can call up a stored procedure in oracle.
the problem is that some stored procedures have OUT parameters that I have to register, and some stored procedures don't.
how can i find out if a stored procedure has an OUT parameter or not?
So that i can format a string with one less ? for statements that don't,
and one more ? for statements that do have an OUT parameter.
is there such a method as boolean OUTparameterExist();
or i'll take any suggestions.

any other solutions?That was the solution. You don't need to execute any sql statement to get Database Meta Data. You just need a connection, which you use to get the DatabaseMetaData instance
DatabaseMetaData dbmd = connection.getMetaData();then invoke any of the (numerous) methods to get the info you require
ResultSet rs = dbmd.getProcedureColumns("mydb","myschema","myproc",null);
while(rs.next()) {
String name = rs.getString("COLUMN_NAME");
if (rs.getShort("COLUMN_TYPE")==DatabaseMetaData.procedureColumnOut) {
// column is an OUT parameter
}Dave

Calling a Stored Procedure with output parameters from Query Templates

This is same problem which Shalaka Khandekar logged earlier. This new thread gives the complete description about our problem. Please go through this problem and suggest us a feasible solution.
We encountered a problem while calling a stored procedure from MII Query Template as follows-
1. Stored Procedure is defined in a package. Procedure takes the below inputs and outputs.
a) Input1 - CLOB
b) Input2 - CLOB
c) Input3 - CLOB
d) Output1 - CLOB
e) Output2 - CLOB
f) Output3 - Varchar2
2. There are two ways to get the output back.
a) Using a Stored Procedure by declaring necessary OUT parameters.
b) Using a Function which returns a single value.
3. Consider we are using method 2-a. To call a Stored Procedure with OUT parameters from the Query Template we need to declare variables of
corresponding types and pass them to the Stored Procedure along with the necessary input parameters.
4. This method is not a solution to get output because we cannot declare variables of some type(CLOB, Varchar2) in Query Template.
5. Even though we are successful (step 4) in declaring the OUT variables in Query Template and passed it successfully to the procedure, but our procedure contains outputs which are of type CLOB. It means we are going to get data which is more than VARCHAR2 length which query template cannot return(Limit is 32767
characters)
6. So the method 2-a is ruled out.
7. Now consider method 2-b. Function returns only one value, but we have 3 different OUT values. Assume that we have appended them using a separator. This value is going to be more than 32767 characters which is again a problem with the query template(refer to point 5). So option 2-b is also ruled out.
Apart from above mentioned methods there is a work around. It is to create a temporary table in the database with above 3 OUT parameters along with a session specific column. We insert the output which we got from the procedure to the temporary table and use it further. As soon the usage of the data is completed we delete the current session specific data. So indirectly we call the table as a Session Table. This solution increases unnecessary load on the database.
Thanks in Advance.
Rajesh

Rajesh,
please check if this following proposal could serve you.
Define the Query with mode FixedQueryWithOutput. In the package define a ref cursor as IN OUT parameter. To get your 3 values back, open the cursor in your procedure like "Select val1, val2, val3 from dual". Then the values should get into your query.
Here is an example how this could be defined.
Package:
type return_cur IS ref CURSOR;
Procedure:
PROCEDURE myProc(myReturnCur IN OUT return_cur) ...
OPEN myReturnCur FOR SELECT val1, val2, val3 FROM dual;
Query:
DECLARE
MYRETURNCUR myPackage.return_cur;
BEGIN
myPackage.myProc(
MYRETURNCUR => ?
END;
Good luck.
Michael

Oracle Stored Procedure with out parameter

Good morning,
Is it possible to use an Oracle stored procedure with out parameters in MII ?
If yes, what is the manipulation to see the values of parameters Out?
Thank you

Michael,
This is the MII query template :
DECLARE
STRCOMPTERENDU NVARCHAR2(200);
BEGIN
STRCOMPTERENDU := NULL;
XMII.SP_VALIDATEPROCESSORDERSLIST2 ( STRCOMPTERENDU => [Param.1] );
COMMIT;
END;
and the stocked procedure code
CREATE OR REPLACE PROCEDURE XMII.SP_ValidateProcessOrdersList2(strCompteRendu OUT nVarchar2) IS
tmpVar NUMBER;
debugmode INT;
strClauseSql varchar(2048);
strListPOactif varchar(1024);
dtmTimeStamp DATE;
   NAME:       SP_ValidateProcessOrdersList
   PURPOSE:
   REVISIONS:
   Ver        Date        Author           Description
   1.0        18/06/2008          1. Created this procedure.
   NOTES:
   Automatically available Auto Replace Keywords:
      Object Name:     SP_ValidateProcessOrdersList
      Sysdate:         18/06/2008
      Date and Time:   18/06/2008, 18:45:32, and 18/06/2008 18:45:32
      Username:         (set in TOAD Options, Procedure Editor)
      Table Name:       (set in the "New PL/SQL Object" dialog)
BEGIN
   tmpVar := 0;
   debugmode := 0;
   -- lecture date systeme pour time stamp
   select sysdate into dtmTimeStamp from dual;
   if debugmode = 1 then
    DBMS_OUTPUT.put_line('SP_ValidateProcessOrdersList');
   end if;
   -- insertion du bloc dans le log
   insert into LOG_ORDER
    (DATE_ORDER,BLOCK_ORDER,ID_LOG_ORDER)
   values
   (dtmTimeStamp,'SP_ValidateProcessOrdersList',ID_LOG_ORDER.nextval);
   Commit;
    if debugmode = 1 then
    DBMS_OUTPUT.put_line('insertion LOG OK');
   end if;
strCompteRendu := '0123456-896;0123456-897';
commit;
   EXCEPTION
     WHEN NO_DATA_FOUND THEN
       NULL;
     WHEN OTHERS THEN
     ROLLBACK;
     -- insertion du bloc dans le log
   insert into LOG_ORDER
    (DATE_ORDER,BLOCK_ORDER,ID_LOG_ORDER)
   values
   (dtmTimeStamp,' ',ID_LOG_ORDER.nextval);
   COMMIT;
       -- Consider logging the error and then re-raise
       RAISE;
END SP_ValidateProcessOrdersList2;
Thanks for your help
Alexandre

Calling stored procedure with output parameters in a different schema

I have a simple stored procedure with two parameters:
PROCEDURE Test1(
pOutRecords OUT tCursorRef,
pIdNumber IN NUMBER);
where tCursorRef is REF CURSOR.
(This procedure is part of a package with REF CURSOR declared in there)
And I have two database schemas: AppOwner and AppUser.
The above stored procedure is owned by AppOwner, but I have to execute this stored procedure from AppUser schema. I have created a private synonym and granted the neccessary privileges for AppUser schema to execute the package in the AppUser schema.
When I ran the above procedure from VB using ADO and OraOLEDB.Oracle.1 driver, I got the following error when connecting to the AppUser schema:
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'TEST1'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
but when I was connecting to the AppOwner schema, everything is running correctly without errors.
Also, when I switch to the microsoft MSDAORA.1 driver, I can execute the above procedure without any problems even when connecting to the AppUser schema.
I got this error only when I am trying to execute a stored procedure with an output parameter. All other procedures with only input parameters have no problems at all.
Do you know the reason for that? Thanks!

If anyone has figured this one out let me know. I'm getting the same problem. Only in my case I've tried both the "OraOLEDB.Oracle" provider and the "MSDAORA" provider and I get an error either way. Also my procedure has 2 in parameters and 1 out parameter. At least now I know I'm not the only one with this issue. :)
'*** the Oracle procedure ***
Create sp_getconfiguration(mygroup in varchar2, myparameter in varchar2, myvalue out varchar2)
AS
rec_config tblconfiguration.configvalue%type;
cursor cur_config is select configvalue from tblconfiguration where configgroup = mygroup and configparameter = myparameter;
begin
open cur_config;
fetch cur_config into rec_config;
close cur_config;
myvalue := rec_config;
end;
'** the ado code ****
dim dbconn as new adodb.connection
dim oCmd as new adodb.connection
dim ors as new adodb.recordset
dbconn.provider = "MSDAORA" 'or dbconn.provider = "OraOLEDB.Oracle"
dbconn.open "Data Source=dahdah;User ID=didi;Password=humdy;PLSQLRSet=1;"
set ocmd.activeconnection = dbconn
cmd.commandtext = "{call fogle.sp_getconfiguration(?,?)}"
'i've also tried creating a public synonym called getconfiguration and just refering to procedure by that.
' "{call getconfiguration(?, ?)}"
' "{call getconfiguration(?,?, {resultset 1, myvalue})}"
'and numerous numerous other combinations
set oPrm = cmd.createparameter("MYGROUP", advarchar, adparaminput, 50, strGrouptoPassIn$)
cmd.parameters.append oPrm
set oPrm = cmd.createParameter("MYPARAMETER", advarchar, adParamInput, 50, strParameterToPassIn$)
cmdParameters.append oPrm
set rs = cmd.execute

Can you get values back from a stored procedure via OUTPUT parameters?

Can you get values back from calling a stored procedure via OUTPUT parameters/variables? I call the SP via a SQL statement from a script either in a WF or DF.
I thought I read some reference that DI could not get the values from OUTPUT parameters but I could not find it again (don't know if it is in any of the documentation or referred to in a forum.
I did try a couple of tests but it did not reutrn any values via OUTPUT. But before I give up I thought I'd see if you could and maybe I needed to change something.

This isn't exactly an answer to your question, but I'll point out that, given that you're resorting to a SQL script in the first place, there's no reason you can't also turn the output parameters into a regular result or record set. (The following uses T-SQL, although I think it's pretty generic.)
declare @param1 int, param2 varchar(100), @return int;
exec @return = proc @param1 = @param1 output, @param2 = @param2 output;
select @param1 as param1, @param2 as param2;
That is, to get from output parameters to a "regular" output from the SQL script isn't much of a leap...
Jeff Prenevost
BI Consultant
Ann Arbor, MI

How to call stored procedure with multiple parameters in an HTML expression

Hi, Guys:
Can you show me an example to call stored procedure with multiple parameters in an HTML expression? I need to rewrite a procedure to display multiple pictures of one person stored in database by clicking button.
The orginal HTML expression is :
<img src="#OWNER#.dl_sor_image?p_offender_id=#OFFENDER_ID#" width="75" height="75">which calls a procedure as:
procedure dl_sor_image (p_offender_id IN NUMBER)now I rewrite it as:
PROCEDURE Sor_Display_Current_Image(p_n_Offender_id IN NUMBER, p_n_image_Count in number)could anyone tell me the format for the html expression to pass multiple parameters?
Thanks a lot.
Sam

Hi:
Thanks for your help! Your question is what I am trying hard now. Current procedure can only display one picture per person, however, I am supposed to write a new procedure which displays multiple pictures for one person. When user click a button on report, APEX should call this procedure and returns next picture of the same person. The table is SOR_image. However, I rewrite the HTML expression as follows to test to display the second image.
<img src="#OWNER#.Sor_Display_Current_Image?p_n_Offender_id=#OFFENDER_ID#&p_n_image_Count=2" width="75" height="75"> The procedure code is complied OK as follows:
create or replace
PROCEDURE Sor_Display_Current_Image(p_n_Offender_id IN NUMBER, p_n_image_Count in number) AS
    v_mime_type VARCHAR2(48);
    v_length NUMBER;
    v_name VARCHAR2(2000);
    v_image BLOB;
    v_counter number:=0;
    cursor cur_All_Images_of_Offender is
      SELECT 'IMAGE/JPEG' mime_type, dbms_lob.getlength(image) as image_length, image
      FROM sor_image
      WHERE offender_id = p_n_Offender_id;
    rec_Image_of_Offender cur_All_Images_of_Offender%ROWTYPE;
BEGIN
    open cur_All_Images_of_Offender;
    loop
      fetch cur_All_Images_of_Offender into rec_Image_of_Offender;
      v_counter:=v_counter+1;
      if (v_counter=p_n_image_Count) then
        owa_util.mime_header(nvl(rec_Image_of_Offender.mime_type, 'application/octet'), FALSE);
        htp.p('Content-length: '||rec_Image_of_Offender.image_length);
        owa_util.http_header_close;
        wpg_docload.download_file (rec_Image_of_Offender.image);
      end if;
      exit when ((cur_All_Images_of_Offender%NOTFOUND) or (v_counter>=p_n_image_Count));
    end loop;
    close cur_All_Images_of_Offender;
END Sor_Display_Current_Image; The procedure just open a cursor to fetch the images belong to the same person, and use wpg_docload.download_file function to display the image specified. But it never works. It is strange because even I use exactly same code as before but change procedure name, Oracle APEX cannot display an image. Is this due to anything such as make file configuration in APEX?
Thanks
Sam

Calling Oracle stored procedure with out param of user define type from Entity Framework 5 with code first

Guys i am using Entity Framework 5 code first (I am not using edmx) with Oracle and all works good, Now i am trying to get data from stored procedure which is under package but stored procedure have out param which is user define type, Now my question is
how i will call stored procedure from entity framework
Thanks in advance.

I agree with you, but issue is we have lots of existing store procedure, which we need to call where damn required. I am sure those will be few but still i need to find out.
If you think you are going to get existing MS Stored Procedures or Oracle Packages that had nothing to do with the ORM previously to work that are not geared to do simple CRUD operations with the ORM and the database tables, you have a rude awakening
coming that's for sure. You had better look into using ADO.NET and Oracle Command objects and call those Oracle Packages by those means and use a datareader.
You could use the EF backdoor, call Oracle Command object and use the Packages, if that's even possible, just like you can use MS SQL Server Stored Procedures or in-line T-SQL via the EF backdoor.
That's about your best shot.
http://blogs.msdn.com/b/alexj/archive/2009/11/07/tip-41-how-to-execute-t-sql-directly-against-the-database.aspx

Getting values from a stored procedure with no parameters

Hi,
I'm trying to get values out of a stored procedure that I created on SQL server. I'm trying to get XML values out of the database, but I'm not sure how to get any data out of it written to a file if the procedure doesn't have any parameters.
So I'm just making a call:
CallableStatement cs = conn.prepareCall("{call myproc}");
cs.execute();How do I get values back from this stage?
Thank you very much,
Lior

The short form answer, which assumes that the stored procedure is returning the XML as an out parameter would go something like this.
     public void build(String newUserID, String newPassword) throws SQLException {
          String sql = "{ call GET_ITEM_DETAIL(?, ?, ?, ?, ?, ?) }" ;
          try{
               init(newUserID, newPassword) ;
               setCallableStatement(getConnection().prepareCall(sql)) ;
               getCallableStatement().setInt(1, getItemNumber()) ;
               getCallableStatement().registerOutParameter(2, oracle.jdbc.driver.OracleTypes.CURSOR) ;
               getCallableStatement().registerOutParameter(3, oracle.jdbc.driver.OracleTypes.INTEGER) ;
               getCallableStatement().registerOutParameter(4, oracle.jdbc.driver.OracleTypes.VARCHAR);
               getCallableStatement().registerOutParameter(5, oracle.jdbc.driver.OracleTypes.VARCHAR) ;
               getCallableStatement().registerOutParameter(6, oracle.jdbc.driver.OracleTypes.VARCHAR) ;
               getCallableStatement().execute() ;
               setSqlResult(getCallableStatement().getInt(3)) ;
               setSqlMessage(getCallableStatement().getString(4)) ;
               if( getSqlResult() != 0 ){
                    throw new SQLException(getSqlMessage(), null, getSqlResult()) ;
               setResultSet((java.sql.ResultSet) getCallableStatement().getObject(2)) ;
               if( getResultSet() != null ){
                    while( getResultSet().next() ){
                         setItemType(getResultSet().getString("ITEM_TYPE")) ;
                         setItemValue(getResultSet().getString("ITEM_VAL")) ;
                         setDisplayType(getCallableStatement().getString(5)) ;
                         setDisplaySize(Integer.parseInt(getCallableStatement().getString(6))) ;
          catch(SQLException e){
               java.util.Date now = new java.util.Date() ;
               java.text.DateFormat format = java.text.DateFormat.getInstance() ;
               setSqlMessage( e.getClass().getName() + " : " + format.format(now) + " : " + e.getMessage() + " : IN " + getClass().getName() ) ;
               System.err.println(getSqlMessage()) ;
               throw e ;
          finally{
               closeResources() ;
     }The GET_ITEM_DETAIL stored procedure returns several out parameters of various types. The code registers them as out parameters along with an anticipated type and then calls the getXXX(n) method that corresponds with that data type in the appropriate position.
As I mentioned in my other post, the onus of returning the XML is on the stored procedure, when you get it into Java it's going to be a java.lang.String that you can then parse by whatever means is appropriate to your situation.
Regards,

Crystal Reports 9 and Stored Procedures using supplied parameters from user

Hi,
I have a Crystal Reports 9 report that prints and works fine. It requests from the user 2 pieces of data which both are String data and not nulls. I want to use the same report in a Visual Basic.Net 2003 program. I can pull the report onto the form and it runs wonderfully. I want to make it run programatically with out prompting for the user to key in the parameters. I can supply them from an existing data file. I have tried many things but have lacked the solution.
How can I pass the parameters from VB.Net 2003 to the stored procedure which runs the Crystal Report with in the VB.Net 2003 program.
I appreciate all help and comments.
Can this be done or do I need to just re-write the report in VB.Net 2003?
Thanks,
Norman

Hi, Norman;
It sure is possible to pass parameters to a Stored Procedure via our .NET SDK.
Have a look at these samples:
https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/9043bbbc-ae66-2b10-ce96-b48f9e25a450
There are samples showing passing parameters.
Regards,
Jonathan

Call stored procedure with OUT parameter

Hello,
I have created a short-lived process. Within this process I am using the "FOUNDATION > JDBC > Call Stored Procedure" operation to call an Oracle procedure. This procedure has 3 parameters, 2 IN and 1 OUT parameter.
The procedure is being executed correctly. Both IN parameters receive the correct values but I am unable to get the OUT parameter's value in my process.
Rewriting the procedure as a function gives me an ORA-01460 since one of the parameters contains XML (>32K) so this is not option...
Has someone been able to call a stored procedure with an OUT parameter?
Regards,
Nico

Object is Foundation, Execute Script
This is for a query, you can change to a stored procedure call. Pull the value back in the Java code then put into the process variable.
import javax.naming.InitialContext;
import javax.sql.DataSource;
import java.sql.*;
PreparedStatement stmt = null;
Connection conn = null;
ResultSet rs = null;
try {
InitialContext ctx = new InitialContext();
DataSource ds = (DataSource) ctx.lookup("java:IDP_DS");
conn = ds.getConnection();
stmt = conn.prepareStatement("select FUBAR from TB_PT_FUBAR where PROCESS_INSTANCE_ID=?");
stmt.setLong(1, patExecContext.getProcessDataLongValue("/process_data/@inputID"));
rs = stmt.executeQuery();
rs.next();
patExecContext.setProcessDataStringValue("/process_data/outData", rs.getString(1));
} finally {
try {
rs.close();
} catch (Exception rse) {}
try {
stmt.close();
} catch (Exception sse) {}
try {
conn.close();
} catch (Exception cse) {}

Invoking Stored Procedure with OUT Parameter

I am calling a stored procedure that has a "out" parameter of PL/SQL type (table of varchar2) through toplink API. My procedure executes, performs the updates successfully, but I can not obtain the value of the out parameter. Is the approach followed below incorrect? I could not figure out by looking into examples provided in the documentation:
http://download.oracle.com/docs/cd/B25221_04/web.1013/b25386/building_and_using_application_services009.htm#BCFEFAHC
Java function is given below:
public List removeFromAutoupdSched( List srNumbers, String userName)
if (srNumbers == null || srNumbers.size() == 0)
return null;
List result = null;
try
//Example Stored procedure call with an output parameter
DatabaseLogin login = m_dbSess.getLogin();
Connection conn = (Connection) (java.sql.Connection)login.connectToDatasource(null);
oracle.sql.ArrayDescriptor arrDesc = new oracle.sql.ArrayDescriptor("AUTOUPD_SRLIST_T", conn);
oracle.sql.ARRAY srARR = new oracle.sql.ARRAY(arrDesc, conn, srNumbers.toArray());
StoredProcedureCall procCall = new StoredProcedureCall();
procCall.setProcedureName("SEW_AUTOUPD.PURGE_AUTOUPD_SCHEDULE");
procCall.addNamedArgumentValue("excludeSRlist", srARR);
procCall.addNamedArgumentValue("exclude_by", userName);
procCall.addNamedOutputArgument(
"excludeSR_srlist_status",
"excludeSR_srlist_status",
OracleTypes.ARRAY,
"AUTOUPD_SRLIST_ERRS_T"
ValueReadQuery vq = new ValueReadQuery();
vq.setCall(procCall);
oracle.sql.ARRAY srResultARR = (oracle.sql.ARRAY)m_dbSess.executeQuery(vq);
if (srResultARR != null)
String[] msgs = (String[])srResultARR.getArray();
if (msgs.length > 0)
result = Arrays.asList(msgs);
Iterator iter = result.iterator();
while (iter.hasNext())
System.out.println("msg = " + iter.next());
return result;
catch (Exception exc)
throw new RuntimeException(exc);
PL/SQL Type
create or replace TYPE autoupd_srlist_errs_t IS TABLE OF VARCHAR2(150);
Sample procedure called by toplink:
PROCEDURE purge_autoupd_schedule(
excludeSRlist autoupd_srlist_t,
exclude_by VARCHAR2,
excludeSR_srlist_status OUT NOCOPY autoupd_srlist_errs_t)
IS
pkg sew_log.pkg_name%TYPE default upper('sew_autoupd');
prc sew_log.prc_name%TYPE default upper('purge_autoupd_schedule(excludeSRlist, exclude_by)');
srno NUMBER;
-- cnt NUMBER := 0;
exclude_status VARCHAR2(150);
err_prefix VARCHAR2(50) := 'Unable to exclude from autoupdate, ';
BEGIN
FOR i IN excludeSRlist.FIRST..excludeSRlist.LAST
LOOP
BEGIN
srno := excludeSRlist(i);
-- Update actn_taken column in autoupd_schedule before doing delete.
UPDATE autoupd_schedule SET actn_taken='Removed by engineer', UPD_TIME=systimestamp
WHERE sr_no = srno and engr_itsid = exclude_by;
-- Add SR to exclusion list.
INSERT INTO autoupd_exclude(sr_no, exclude_by, exclude_time) VALUES (srno, exclude_by, systimestamp);
exclude_status := 'Item ' || i || ' - SR ' || srno || ' - ' || 'Excluded from autoupdate.';
excludeSR_srlist_status(i) := exclude_status;
EXCEPTION
WHEN others THEN
-- Add SR to excludeSR_fail if previous steps occurred okay.
-- cnt := cnt +1;
exclude_status := 'Item ' || i || ' - SR ' || srno || ' - ' || err_prefix || substr(sqlerrm,12);
excludeSR_srlist_status(i) := exclude_status;
END;
END LOOP;
EXCEPTION
WHEN others THEN
sew_logger.log(
code => substr(sqlerrm,1,9),
msg => substr(sqlerrm,12),
pkg => pkg,
prc => prc
END;
Any help is appreciated.

What happens if you run the stored procedure through pure jdbc (without TopLink)?
I tried a simple example that worked for me:
//defined type in the db
CREATE TYPE "TEST"."VAR_LIST" AS TABLE OF VARCHAR2(150)
//defined stored procedure in the db
CREATE OR REPLACE PROCEDURE "TEST"."VAR_LIST_IN_OUT" (
VARS_IN VAR_LIST,
VARS_OUT OUT NOCOPY VAR_LIST
as
begin
VARS_OUT := VAR_LIST();
FOR i IN VARS_IN.FIRST..VARS_IN.LAST LOOP
    VARS_OUT.EXTEND;
    VARS_OUT(i) := CONCAT(VARS_IN(i), '_BLAH');
END LOOP;
end;
// Java code
StoredProcedureCall call = new StoredProcedureCall();
call.setProcedureName("VAR_LIST_IN_OUT");
Connection conn = (Connection) ((oracle.toplink.internal.sessions.AbstractSession)getSession()).getAccessor().getConnection();
oracle.sql.ArrayDescriptor arrDesc = new oracle.sql.ArrayDescriptor("VAR_LIST", conn);
oracle.sql.ARRAY srARR = new oracle.sql.ARRAY(arrDesc, conn, new String[]{"A1", "A2", "A3"});
call.addNamedArgumentValue("VARS_IN", srARR);
call.addNamedOutputArgument("VARS_OUT", "VARS_OUT", Types.ARRAY, "VAR_LIST");
ValueReadQuery query = new ValueReadQuery();
query.setCall(call);
Object result = getSession().executeQuery(query);
Object[] array = (Object[])((java.sql.Array)result).getArray();
for(int i=0; i<array.length; i++) {
    System.out.println(array);
// System.out:
[TopLink Finest]: 2008.04.25 15:37:16.687--DatabaseSessionImpl(3491657)--Thread(Thread[main,5,main])--Execute query ValueReadQuery()
[TopLink Fine]: 2008.04.25 15:37:16.703--DatabaseSessionImpl(3491657)--Connection(29118152)--Thread(Thread[main,5,main])--BEGIN VAR_LIST_IN_OUT(VARS_IN=>?, VARS_OUT=>?); END;
     bind => [oracle.sql.ARRAY@323274, => VARS_OUT] (There is no English translation for this message.)
A1_BLAH
A2_BLAH
A3_BLAH
My stored procedure didn't work (on Oracle 9 db) without output collection initialization: VARS_OUT := VAR_LIST(); and extending: VARS_OUT.EXTEND.

How to call oracle stored procedure with OUT parameter?

I create oracle stored procedure in eclipse oepe
PROCEDURE SP_SELECT_ORA (
ID_INPUT IN VARCHAR2,
ID_OUTPUT OUT VARCHAR2,
PASSWD_OUTPUT OUT VARCHAR2,
NAME_OUTPUT OUT VARCHAR2) IS
BEGIN
SELECT EMP_ID, EMP_Passwd, EMP_Name
INTO ID_OUTPUT, PASSWD_OUTPUT, NAME_OUTPUT
FROM family
WHERE EMP_ID = ID_INPUT;
END;
and I try to call the sp in jpa like below,
@NamedNativeQueries({
     @NamedNativeQuery(name = "callSelectSP", query = "call SP_SELECT_ORA(?,?,?,?)", resultClass = Members.class)
@Entity
@Table(name="family")
public class Members implements Serializable {
     @Id
     @Column(name = "EMP_ID")
     private String ID;
     @Column(name = "EMP_Passwd")
     private String Passwd;
     @Column(name = "EMP_Name")
     private String Name;
==============
@PersistenceContext(unitName="MyFamily")
     EntityManager em;
query = em.createNamedQuery("callSelectSP");
     query.setParameter(1, ID);
     String id_output = null;
     String passwd_output = null;
     String name_output = null;
     query.setParameter(2,id_output);
     query.setParameter(3,passwd_output);
     query.setParameter(4,name_output);
     query.executeUpdate();
     member = (Members)query.getSingleResult();
But this query throws exception,
19:55:35,500 WARN [org.hibernate.engine.jdbc.spi.SqlExceptionHelper] (http--127.0.0.1-8080-1) SQL Error: 1465, SQLState: 72000
19:55:35,500 ERROR [org.hibernate.engine.jdbc.spi.SqlExceptionHelper] (http--127.0.0.1-8080-1) ORA-01465: invalid hex number
I don't know how. Pls, give me your advice. Thanks in advnace.
Best regards

Thank you for your reply, Chris!
I tried this one.
@NamedNativeQueries({
@NamedNativeQuery(name = "callSelectSP", query = "exec SP_SELECT_ORA( ?, :id_output, :passwd_output, :name_output) " , resultClass = Members.class)
@Entity
@Table(name="family")
public class Members implements Serializable
===================
query = em.createNamedQuery("callSelectSP");
query.setParameter(1, ID);
String id_output = null;
String passwd_output = null;
String name_output = null;
query.setParameter("id_output", id_output);
query.setParameter("passwd_output", passwd_output);
query.setParameter("name_output",name_output);
query.executeUpdate();
On Console hibernate shew the sql and ora # like below,
19:59:25,160 INFO [stdout] (http--127.0.0.1-8080-1) Hibernate: exec SP_SELECT_ORA( ?, ?, ?, ?)
19:59:25,192 WARN [org.hibernate.engine.jdbc.spi.SqlExceptionHelper] (http--127.0.0.1-8080-1) SQL Error: 900, SQLState: 42000
19:59:25,192 ERROR [org.hibernate.engine.jdbc.spi.SqlExceptionHelper] (http--127.0.0.1-8080-1) ORA-00900: Invalid SQL statement
Pls, inform me your advice. Thanks in advance.
Best regards.

Calling a stored procedure with default parameters

Dear all,
I am trying to call a stored procedure that has not all the parameters compulsory, and indeed, there are some I am not interested in. Therefore, I would like to call the stored procedure initializing only some of the parameters but if I miss some of them, I have an SQLException thrown. Is there any way to do that?
Thanks
Marie

Hi
One way to do it is ---
By using Default Parameters you can miss few parameters while calling a procedure.
=================================================================
As the example below shows, you can initialize IN parameters to default values. That way, you can pass different numbers of actual parameters to a subprogram, accepting or overriding the default values as you please.
Moreover, you can add new formal parameters without having to change every call to the subprogram.
PROCEDURE create_dept (
new_dname VARCHAR2 DEFAULT 'TEMP',
new_loc VARCHAR2 DEFAULT 'TEMP') IS
BEGIN
INSERT INTO dept
VALUES (deptno_seq.NEXTVAL, new_dname, new_loc);
END;
If an actual parameter is not passed, the default value of its corresponding formal parameter is used.
Consider the following calls to create_dept:
create_dept;
create_dept('MARKETING');
create_dept('MARKETING', 'NEW YORK');
The first call passes no actual parameters, so both default values are used.
The second call passes one actual parameter, so the default value for new_loc is used.
The third call passes two actual parameters, so neither default value is used.
Usually, you can use positional notation to override the default values of formal parameters.
However, you cannot skip a formal parameter by leaving out its actual parameter.
For example, the following call incorrectly associates the actual parameter 'NEW YORK' with the formal parameter new_dname:
create_dept('NEW YORK'); -- incorrect
You cannot solve the problem by leaving a placeholder for the actual parameter.
For example, the following call is illegal:
create_dept(, 'NEW YORK'); -- illegal
In such cases, you must use named notation, as follows:
create_dept(new_loc => 'NEW YORK');
===============================================================
For more details refer URL http://technet.oracle.com/doc/server.804/a58236/07_subs.htm#3651
Hope this helps
Regards
Ashwini

Calling stored procedures with output parameters using RDO and VB

I have a simple test procedure defined as follows:
CREATE OR REPLACE PROCEDURE test_sp (inval1 IN VARCHAR2,
inval2 IN NUMBER, inval3 OUT VARCHAR2, inval4 OUT NUMBER) IS
BEGIN
inval3 := 'RETURN TEST';
inval4 := 10;
END;
I am attempting to call this procedure from VB 5.0 using RDO and the Oracle ODBC Driver 8.01.06:
dim rdoQd as rdoQuery
dim grdoCn as rdoConnection
strSQL = "{ call test_sp('SOMETHING',?,?,?) }"
Set rdoQd = grdoCn.CreateQuery("", strSQL)
rdoQd(0).Direction = rdParamInput
' get error# 40041 at above line
' "Object Collection: Couldn't ' find item indicated by text."
rdoQd(0).Type = rdTypeINTEGER
rdoQd(0).Value = 5
rdoQd(1).Direction = rdParamOutput
rdoQd(1).Type = rdTypeVARCHAR
rdoQd(2).Direction = rdParamOutput
rdoQd(2).Type = rdTypeINTEGER
Set rdoApp = rdoQd.OpenResultset()
MsgBox (CStr(rdoQd(1)))
MsgBox (CStr(rdoQd(2)))
When I run this VB code, I get the above mentioned error. If I use placeholders for all parameters (like "{ call test_sp (?,?,?,?) }" ), no error occurs.
I really need to use the first type of syntax from above and not have to use placeholders for all parameters. Is there a way to accomplish this?
TIA,
Esther

Are you getting any warning while importing the stored procedure?
Please check the below datatypes:
While creating the stored procedure, if you have used varchar(MAX), please ALTER it to varchar(255) and reimport to DS.
Also, the datatype of $message (global variable or local variable) used inside DS should also be varchar(255)
Try a print statement in between.
ADMIN.DBO.SPJOBSUMMARY(69,$message,$rtCode,$rtVal);
print('Message is '||$message);
smtp_to('leighattest.com.au', 'Results of ' || job_name(), $rtCode || '//' || $rtVal || '~~' || $message || '//', 0,0);
and see in the job log if DS is able to retrieve the output from DB.
Regards,
Suneer

Stored Procedure VARCHAR2 Out Parameters NULL.

Similar Messages

Maybe you are looking for