Stored Procedure, "WITH EXEC AS CALLER"

I'm reviewing a stored procedure some one else wrote.
Right before the variable declarations (DECLARE) and right after the parameters they wrote the following:
WITH EXEC AS CALLER
AS
What does this do, exactly? I've looked at stored procedure tutorials and examples and none of them use this.
Here is more of the code snippet if need be.
USE [Database1]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[RagGetIt]
@initials nvarchar(3), @state nvarchar(2)
WITH EXEC AS CALLER
AS
DECLARE
@var1 INT,
@var2 INT,
@var3 INT,
Also, is there a point of having those three 'GO' statements in the beginning, or is GO just supposed to go at the end of the procedure's code?
-Nothing to see. Move along.

http://lmgtfy.com/?q=with+exec+as+caller+mssql
Don't forget to mark helpful posts, and answers. It helps others to find relevant posts to the same question.

Similar Messages

T-sql 2008 r2 place results from calling a stored procedure with parameters into a temp table

I would like to know if the following sql can be used to obtain specific columns from calling a stored procedure with parameters:
/* Create TempTable */
CREATE TABLE #tempTable
(MyDate SMALLDATETIME,
IntValue INT)
GO
/* Run SP and Insert Value in TempTable */
INSERT INTO #tempTable
(MyDate,
IntValue)
EXEC TestSP @parm1, @parm2
If the above does not work or there is a better way to accomplish this goal, please let me know how to change the sql?

declare @result varchar(100), @dSQL nvarchar(MAX)
set @dSQL = 'exec @res = TestSP '''+@parm1+''','' '''+@parm2+' '' '
print @dSQL
EXECUTE sp_executesql @dSQL, N'@res varchar(100) OUTPUT', @res = @result OUTPUT
select @result
A complicated way of saying
EXEC @ret = TestSP @parm1, @parm2
SELECT @ret
And not only compliacated, it introduces a window for SQL injection.
Erland Sommarskog, SQL Server MVP, [email protected]

Calling Stored procedure with Parameters in PowerPivot DataModel

Hi All,
I wanted to call a SQL stored procedure from PowerPivot(Excel) on based on changing slicer's value.
Currently, we can call stored procedure wihtout any parameter from Data Model tab using
Exec stored_proc_name in Table Properties window.
What if I want to call the same procedure with a parameter whouse value will come by changing slicer's value. I meant, changing slicer value will act as a parameter to that stored procedure & it should return updated results.
Is this possible in PowerPivot?

Hi Rameshwar,
According to your description, you call a SQL Server stored procedure in PowerPivot data model, now the problem is that you need to pass a parameter to the stored procedure, right?
Based on my research, it seems that we cannot achieve this requirement directly in current version of PowerPivot data model. Here is a similar thread for you reference.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/5350228d-bc62-4a3b-a1a6-e847483e2858/powerpivot-for-excel-2013-call-execute-stored-procedure-with-parameters?forum=sqlkjpowerpivotforexcel
If you have any concern about this behavior, you can submit a feedback at
http://connect.microsoft.com/SQLServer/Feedback and hope it is resolved in the next release of service pack or product. Your feedback enables Microsoft to make software and services the best that they can be, Microsoft might consider to add this feature
in the following release after official confirmation.
Regards,
Charlie Liao
TechNet Community Support

How to call a AS/400 Stored Procedure with a BigDecimal Value?

Hi,
Could you pls tell me how to call a stored procedure on the AS/400 which request an input value of packed decimal(10P 4) value.
I have tried to convert it to a BigDecimal in Java and call the stored procedure as follows but it gave me a decimal point error on the AS/400.
Could you pls show me where I'm wrong in the following code.
Thanks
Jan
========Java program to call AS/400 Stored procedure with setBigDecimal()===========
//Assign the value to String
string sBDVal = "30"
//Convert the String value to BigDecimal
BigDecimal bdAmt = new BigDecimal(sBDVal);
//Call Stored Procedure with parameters,
CallableStatement callSP = conn.prepareCall("{call OSCUPDLENS(?,?,?)}");
// Set in parm values
callSP.setString(1,"Value 1");
callSP.setBigDecimal(2,bdAmt);
callSP.setString(3,"");
// Register out parameter
callSP.registerOutParameter(3, Types.CHAR);
// Execute call to stored procedure
callSP.execute();
// Retrieve out parameters
sErrFlag = callSP.getString(3).trim();
========================Create Stored Procedure on AS/400===========================
c/EXEC SQL
c+ CREATE PROCEDURE TESTSPROC
c+ (IN VAL1 CHAR ( 8),
c+ IN BDAMT DEC (10, 4),
C+ INOUT ERR CHAR ( 1))
C+ LANGUAGE RPGLE NOT
C+ DETERMINISTIC NO SQL EXTERNAL NAME TESTSPROC PARAMETER STYLE
C+ GENERAL
c/END-EXEC
======RPG program on AS/400 to accept the BigDecimal value to a Packed decimal======
* Initialize the i/p parameter
DP#VAL1 S 8A
DP#AMT S 10P 4
DP#ERR S 1A
C*Input parameters
C *ENTRY PLIST
C PARM P#VAL1
C PARM P#AMT
C PARM P#ERR

Could you pls show me where I'm wrong in the following codeI don't know, you're doing a lot of things I have never tried. But "decimal data error" most likely means that the stored procedure is expecting packed data and the driver is giving it zoned data, or vice versa. You could confirm that by dumping your variables inside your RPG. If that is your problem, you could work around it by redefining your BDAMT parameter as integer or string and reformatting it in the RPG.

Calling stored procedures with parameters with the Database Connectivity Toolkit

Hi all,
I am new to the forum and am having difficulty finding a solution to a particular problem I am having regarding using the LabVIEW Database Connectivity Toolkit on a project I am currently working on at my job. I have a database in which I have tables and stored procedures with parameters. Some of these stored procedures have input, output, and return parameters.
I have been trying to follow this example but to no avail: http://digital.ni.com/public.nsf/allkb/07FD130746083E0686257300006326C4?OpenDocument
One such stored procedure I am working on implementing is named "dbo.getAllowablePNs", which executes "SELECT * from DeviceType" (DeviceType is the table). In this case, it does not require an input parameter, it has an output parameter that generates the table [cluster], and has a return parameter which returns an integer value (execution status code) to show if an error occurred. The DeviceType table has 3 columns; ID (PK, int, not null), PN (nvarchar(15), null), and NumMACAddresses (int, null). I have gone over many examples and have talking to NI support to try to implement this and similar stored procedures in LabVIEW but have not been successful. I am able to connect to the database with the Open Connection VI without error, but am running into some confusion following this step. I am then trying to use the Create Parameterized Query VI to call the stored procedure and set the parameters. I assume I would then use the Set Parameter Value VI for each parameter that is wired into the parameters input on the previous Parameterized Query VI? I am also having some confusion during and following these steps as well. I would greatly appreciate any advice or suggestions anyone might have in regards to this situation as I am not a SQL expert. Also, I would be happy to provide any more information that would be helpful.
Regards,
Jon
Solved!
Go to Solution.

Also, I don't know if this would be helpful but here is the actual stored procedure in SQL:
CREATEPROCEDURE [dbo].[getLastSequenceNumber]
@p1 nvarchar(10)='WO-00000'
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SETNOCOUNTON;
-- Insert statements for procedure here
selectmax(SequenceNumber)from Devices where WorkOrderNumber= @p1
END
GO

Calling a stored procedure with a CLOB as input parameter

Hello,
I was unsuccessfully trying to call a stored procedure with a clob as input parameter from my C++ application using occi.
Anyone got a working example to look at?
I already checked the thread Invalid OCI handle when creating a Blob which didn't help.
The problem seems to be that I don't have a lob locator to write my data (xml file) to. I tried creating a temporary clob using the sys.dbms_lob package which only resulted in a major headache on my part...
I would appreciate any help.
Kind regards
Horst
my environment:
Visual Studio 2008, C++ application
Oracle 11g

To start using a blob you have to insert it into the database and then get it back. Sounds weird but that is how it is. Here is a very simple program to do this:
#include<occi.h>
#include <iostream>
using namespace oracle::occi;
using namespace std;
int main()
try
    Environment *env = Environment::createEnvironment(Environment::OBJECT);
    Connection *conn = env->createConnection("hr","hr","");
    string stmt1 = "insert into blob_tab values (:1) ";
    string stmt2 = "select col1 from blob_tab";
    Blob blob(conn);
    blob.setEmpty(conn);
    Statement *stmtObj = conn->createStatement(stmt1);
    stmtObj->setBlob(1,blob);
    stmtObj->executeUpdate();
    conn->commit();
    Blob blob1(conn);
    Statement *stmtObj2 = conn->createStatement(stmt2);
    ResultSet *rs = stmtObj2->executeQuery();
    while(rs->next())
     blob1 = rs->getBlob(1);
    string stmt3 = "begin my_proc(:1) ;end;";
    Statement *stmtObj3 = conn->createStatement(stmt3);
    stmtObj3->setBlob(1,blob1);
    stmtObj3->executeUpdate();
catch (SQLException e)
    cout << e.getMessage();
/* The tables and procedure are primitive but ok for demo
    create table blob_tab(col1 blob);
    create or replace procedure my_proc(arg in blob)
    as
    begin
     -- just a putline here. you can do other more meaningful operations with the blob here
      dbms_output.put_line('hello');
   end;
}Hope this helps.
Thanks,
Sumit

Calling a Stored Procedure with output parameters from Query Templates

This is same problem which Shalaka Khandekar logged earlier. This new thread gives the complete description about our problem. Please go through this problem and suggest us a feasible solution.
We encountered a problem while calling a stored procedure from MII Query Template as follows-
1. Stored Procedure is defined in a package. Procedure takes the below inputs and outputs.
a) Input1 - CLOB
b) Input2 - CLOB
c) Input3 - CLOB
d) Output1 - CLOB
e) Output2 - CLOB
f) Output3 - Varchar2
2. There are two ways to get the output back.
a) Using a Stored Procedure by declaring necessary OUT parameters.
b) Using a Function which returns a single value.
3. Consider we are using method 2-a. To call a Stored Procedure with OUT parameters from the Query Template we need to declare variables of
corresponding types and pass them to the Stored Procedure along with the necessary input parameters.
4. This method is not a solution to get output because we cannot declare variables of some type(CLOB, Varchar2) in Query Template.
5. Even though we are successful (step 4) in declaring the OUT variables in Query Template and passed it successfully to the procedure, but our procedure contains outputs which are of type CLOB. It means we are going to get data which is more than VARCHAR2 length which query template cannot return(Limit is 32767
characters)
6. So the method 2-a is ruled out.
7. Now consider method 2-b. Function returns only one value, but we have 3 different OUT values. Assume that we have appended them using a separator. This value is going to be more than 32767 characters which is again a problem with the query template(refer to point 5). So option 2-b is also ruled out.
Apart from above mentioned methods there is a work around. It is to create a temporary table in the database with above 3 OUT parameters along with a session specific column. We insert the output which we got from the procedure to the temporary table and use it further. As soon the usage of the data is completed we delete the current session specific data. So indirectly we call the table as a Session Table. This solution increases unnecessary load on the database.
Thanks in Advance.
Rajesh

Rajesh,
please check if this following proposal could serve you.
Define the Query with mode FixedQueryWithOutput. In the package define a ref cursor as IN OUT parameter. To get your 3 values back, open the cursor in your procedure like "Select val1, val2, val3 from dual". Then the values should get into your query.
Here is an example how this could be defined.
Package:
type return_cur IS ref CURSOR;
Procedure:
PROCEDURE myProc(myReturnCur IN OUT return_cur) ...
OPEN myReturnCur FOR SELECT val1, val2, val3 FROM dual;
Query:
DECLARE
MYRETURNCUR myPackage.return_cur;
BEGIN
myPackage.myProc(
MYRETURNCUR => ?
END;
Good luck.
Michael

Call stored procedure with OUT parameter

Hello,
I have created a short-lived process. Within this process I am using the "FOUNDATION > JDBC > Call Stored Procedure" operation to call an Oracle procedure. This procedure has 3 parameters, 2 IN and 1 OUT parameter.
The procedure is being executed correctly. Both IN parameters receive the correct values but I am unable to get the OUT parameter's value in my process.
Rewriting the procedure as a function gives me an ORA-01460 since one of the parameters contains XML (>32K) so this is not option...
Has someone been able to call a stored procedure with an OUT parameter?
Regards,
Nico

Object is Foundation, Execute Script
This is for a query, you can change to a stored procedure call. Pull the value back in the Java code then put into the process variable.
import javax.naming.InitialContext;
import javax.sql.DataSource;
import java.sql.*;
PreparedStatement stmt = null;
Connection conn = null;
ResultSet rs = null;
try {
InitialContext ctx = new InitialContext();
DataSource ds = (DataSource) ctx.lookup("java:IDP_DS");
conn = ds.getConnection();
stmt = conn.prepareStatement("select FUBAR from TB_PT_FUBAR where PROCESS_INSTANCE_ID=?");
stmt.setLong(1, patExecContext.getProcessDataLongValue("/process_data/@inputID"));
rs = stmt.executeQuery();
rs.next();
patExecContext.setProcessDataStringValue("/process_data/outData", rs.getString(1));
} finally {
try {
rs.close();
} catch (Exception rse) {}
try {
stmt.close();
} catch (Exception sse) {}
try {
conn.close();
} catch (Exception cse) {}

Calling a stored procedure with RAW and SYS_REFCURSOR

How do you call a stored procedure with the following input and output parameters?
create or replace PROCEDURE test
v_col1 IN NUMBER DEFAULT NULL ,
v_col2 IN VARCHAR2 DEFAULT NULL ,
v_col3 IN RAW DEFAULT NULL ,
v_vol4 IN DATE DEFAULT NULL,
cv_1 IN OUT SYS_REFCURSOR
OPEN cv_1 FOR
SELECT
lv_tmp1 aaaa ,
lv_tmp2 bbbb,
lv_tmp3 cccc
FROM DUAL ;
END;
Edited by: 925963 on Apr 6, 2012 10:50 AM

Did you try just declaring the vars?
untested
declare
myCur SYS_REFCURSOR;
myRaw RAW(4);
BEGIN
test (0, 0, myRaw, sysdate, myCur);
END;

Calling Oracle Stored procedure with OUT parameter from ODI

Hi,
I called an oracle stored procedure with following anonymous block in the ODI procedure.
Declare
Status varchar2(10);
Begin
OTM.DeleteTarget('E_KPI_TARGET_VALUE', Status);
End;
I want to capture the OUT parameter STATUS value in a project level variable.
And based on its va;lue I would like to choose between 2 interfaces in my package.
Please help me in doing this.

Hi,
For that kind of situation I commoly use:
1) one step with:
create or replace package <%=odiRef.getSchemaName("W")%>.pck_var
Status varchar2(10);
end;
* transaction 9, for instance
2) step
Begin
OTM.DeleteTarget('E_KPI_TARGET_VALUE', <%=odiRef.getSchemaName("W")%>.pck_var.Status);
End;
* transaction 9
3) then, at an ODI variable, use a refresh like:
select <%=odiRef.getSchemaName("W")%>.pck_var.Status from dual
at same logical shema where the package was created.
Does it make sense to you?

Calling stored procedure with output parameters in a different schema

I have a simple stored procedure with two parameters:
PROCEDURE Test1(
pOutRecords OUT tCursorRef,
pIdNumber IN NUMBER);
where tCursorRef is REF CURSOR.
(This procedure is part of a package with REF CURSOR declared in there)
And I have two database schemas: AppOwner and AppUser.
The above stored procedure is owned by AppOwner, but I have to execute this stored procedure from AppUser schema. I have created a private synonym and granted the neccessary privileges for AppUser schema to execute the package in the AppUser schema.
When I ran the above procedure from VB using ADO and OraOLEDB.Oracle.1 driver, I got the following error when connecting to the AppUser schema:
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'TEST1'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
but when I was connecting to the AppOwner schema, everything is running correctly without errors.
Also, when I switch to the microsoft MSDAORA.1 driver, I can execute the above procedure without any problems even when connecting to the AppUser schema.
I got this error only when I am trying to execute a stored procedure with an output parameter. All other procedures with only input parameters have no problems at all.
Do you know the reason for that? Thanks!

If anyone has figured this one out let me know. I'm getting the same problem. Only in my case I've tried both the "OraOLEDB.Oracle" provider and the "MSDAORA" provider and I get an error either way. Also my procedure has 2 in parameters and 1 out parameter. At least now I know I'm not the only one with this issue. :)
'*** the Oracle procedure ***
Create sp_getconfiguration(mygroup in varchar2, myparameter in varchar2, myvalue out varchar2)
AS
rec_config tblconfiguration.configvalue%type;
cursor cur_config is select configvalue from tblconfiguration where configgroup = mygroup and configparameter = myparameter;
begin
open cur_config;
fetch cur_config into rec_config;
close cur_config;
myvalue := rec_config;
end;
'** the ado code ****
dim dbconn as new adodb.connection
dim oCmd as new adodb.connection
dim ors as new adodb.recordset
dbconn.provider = "MSDAORA" 'or dbconn.provider = "OraOLEDB.Oracle"
dbconn.open "Data Source=dahdah;User ID=didi;Password=humdy;PLSQLRSet=1;"
set ocmd.activeconnection = dbconn
cmd.commandtext = "{call fogle.sp_getconfiguration(?,?)}"
'i've also tried creating a public synonym called getconfiguration and just refering to procedure by that.
' "{call getconfiguration(?, ?)}"
' "{call getconfiguration(?,?, {resultset 1, myvalue})}"
'and numerous numerous other combinations
set oPrm = cmd.createparameter("MYGROUP", advarchar, adparaminput, 50, strGrouptoPassIn$)
cmd.parameters.append oPrm
set oPrm = cmd.createParameter("MYPARAMETER", advarchar, adParamInput, 50, strParameterToPassIn$)
cmdParameters.append oPrm
set rs = cmd.execute

JDBC-Adapter-Receiver Calling Stored Procedure with Input-Typ Record

Hallo,
I´ m trying calling a stored-procedure with two input-parameter; one of typ record (oracle) and one of type tabel of records. Is this possible (I think there are only types like string, integer etc. possible)? When not is there another possibility to work with that type?
Thanks in advance,
Frank

Hi Frank,
I think stored procedures will not take Array of Records as a Input. If you want to make a loop funtionality etc then JDBC adapter will work accordingly. You need to just call the stored procedure from the JDBC adapter. It will work for the array of records(multiple occurences).
Receiver JDBC Procedures.
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
Alternative option is you can make use of Java Proxy and from there you can call stored procedure ..I think it is possible.. not tried.
Hope this helps
Regards,
Moorthy

Java- Stored Procedure with Call by Result

Hi Oracle-Community,
I am looking for some example Code how to use a Java-Stored Procedure with Out-Parameters. Don't get me wrong. I dont want to call a Procedure with Out Parameters from Java (there are a lot of examples for this out there) . I just want to implement the Call by Result concept in a Java-Stored Procedure. A Client will call this Procedure with some parameters and the Java Procedure will fill them. So my first question: is this possible? And my second Question: How to implement it?
Greetings.

I found out a solution. It is very simple.
Just defining the parameters as java array (e.g. String[] P1). The first value (P1[0]) is the returned value.
At last just set in JDeveloper in the "Edit Method Signature" Dialog the parametermode to OUT.
The dialog can be found by rightclicking on the stored procedure in the dbexport file. You can read this
in Section 6 Publishing Java Classes With Call Specifications -> Setting Parameter Modes in
Oracle Database Java Developer's Guide.

How to call stored procedure with multiple parameters in an HTML expression

Hi, Guys:
Can you show me an example to call stored procedure with multiple parameters in an HTML expression? I need to rewrite a procedure to display multiple pictures of one person stored in database by clicking button.
The orginal HTML expression is :
<img src="#OWNER#.dl_sor_image?p_offender_id=#OFFENDER_ID#" width="75" height="75">which calls a procedure as:
procedure dl_sor_image (p_offender_id IN NUMBER)now I rewrite it as:
PROCEDURE Sor_Display_Current_Image(p_n_Offender_id IN NUMBER, p_n_image_Count in number)could anyone tell me the format for the html expression to pass multiple parameters?
Thanks a lot.
Sam

Hi:
Thanks for your help! Your question is what I am trying hard now. Current procedure can only display one picture per person, however, I am supposed to write a new procedure which displays multiple pictures for one person. When user click a button on report, APEX should call this procedure and returns next picture of the same person. The table is SOR_image. However, I rewrite the HTML expression as follows to test to display the second image.
<img src="#OWNER#.Sor_Display_Current_Image?p_n_Offender_id=#OFFENDER_ID#&p_n_image_Count=2" width="75" height="75"> The procedure code is complied OK as follows:
create or replace
PROCEDURE Sor_Display_Current_Image(p_n_Offender_id IN NUMBER, p_n_image_Count in number) AS
    v_mime_type VARCHAR2(48);
    v_length NUMBER;
    v_name VARCHAR2(2000);
    v_image BLOB;
    v_counter number:=0;
    cursor cur_All_Images_of_Offender is
      SELECT 'IMAGE/JPEG' mime_type, dbms_lob.getlength(image) as image_length, image
      FROM sor_image
      WHERE offender_id = p_n_Offender_id;
    rec_Image_of_Offender cur_All_Images_of_Offender%ROWTYPE;
BEGIN
    open cur_All_Images_of_Offender;
    loop
      fetch cur_All_Images_of_Offender into rec_Image_of_Offender;
      v_counter:=v_counter+1;
      if (v_counter=p_n_image_Count) then
        owa_util.mime_header(nvl(rec_Image_of_Offender.mime_type, 'application/octet'), FALSE);
        htp.p('Content-length: '||rec_Image_of_Offender.image_length);
        owa_util.http_header_close;
        wpg_docload.download_file (rec_Image_of_Offender.image);
      end if;
      exit when ((cur_All_Images_of_Offender%NOTFOUND) or (v_counter>=p_n_image_Count));
    end loop;
    close cur_All_Images_of_Offender;
END Sor_Display_Current_Image; The procedure just open a cursor to fetch the images belong to the same person, and use wpg_docload.download_file function to display the image specified. But it never works. It is strange because even I use exactly same code as before but change procedure name, Oracle APEX cannot display an image. Is this due to anything such as make file configuration in APEX?
Thanks
Sam

How to call PL/SQL stored procedure with TWO or more arguments from URL?

Hi all,
does anybody know, how to call stored procedure with more than one argument?
How to do this with one argument is known -
<img src="#OWNER#.retreive_img_data?i_id=#IMG_ID#" width="70" height="80" alt="No Picture">
But if I need to call procedure with two formal parameters? And need to pass through URL, for example, two page item values?

Just separate with an "&". Using your previous example, I'll add i_name and i_type:
<img src="#OWNER#.retreive_img_data?i_id=#IMG_ID#&i_name=somename&i_type=jpg" width="70" height="80" alt="No Picture" />
Tyler

Stored Procedure, "WITH EXEC AS CALLER"

Similar Messages

Maybe you are looking for