Storing data in a child node
Hi All,
I have a parent node called "tablemain" and child node for it is "tablechild" .
This "tablechild" has a attribute called "id" .
I have a input field and "save" button in my output screen.
If I enter value in inputfield and press save button the value should be stored as 1st element in the node ""tablechild" .
After clering the value in inputfield and if I again enter a new value in that and press save button the value should be stored as a second element in the "tablechild" .The process should be continued like this.
How can I do achieve this?Please help me in this.
Thanks in advance.
Message was edited by:
Bharath Akuthota
Hi Bharath,
Follow this code in your button click:
// Get the id from the input filed
String id = wdContext.currentContextElement().get<input filed att>();
IPrivateTableComponentView.I<TAblemain>element ele1 = wdContext.create<TAblemain>element();
wdContext.node<TAblemain>().addElement(ele1);
IPrivateTableComponentView.I<TAblechild>element ele = wdContext.node<TAblemain>.node<TAblechild>.createVn_ChildElement();
ele.set<table child att>(id);
wdContext.node<TAblemain>.node<TAblechild>.addElement(ele);
Then print the size of the node and see whne u add the attributes.
wdComponentAPI.getMessageManager().reportSuccess("Size of child node "+wdcontext.node<TableChild>().size());
This will solve ur problem,
Regards,
Nagarajan.
Similar Messages
-
How to process the data in a child node
Hi Guru,
would like to knows is that a way or best practice to process the child notes data? This is my case.
request input will have this structure.
<To>
<Email>[email protected]</Email>
<Email>[email protected]</Email>
</To>
<From>David</From>
from the above schema i will need to use the email add to invoke some DB process and get the user details. Any idea how can I get each of the nodes and process it. Sorry i am still new in XML.
In my mind is to loop the TO element but how? Thanks in advancesomething like that :
<while name="While_1" condition="bpws:getVariableData('varIndex') < ora:countNodes('inputVariable','payload','/client:To/client:Email') + 1">
<assign>
- first copy rule
varTemp = concat(bpws:getVariableData('varTemp','payload','/client:emailCollection')," ",bpws:getVariableData('inputVariable','payload','/client:To/client:Email[position() = bpws:getVariableData('varIndex')]'))
-second copy rule
bpws:getVariableData('varIndex') = bpws:getVariableData('varIndex') + 1
</asign>
</while> -
How to select data with multiple child nodes
We have the following data:
me table ei table
m1 e1
m1 e2
m1 e3
m1 e4
m2 e5
m2 e6
m3 e7
m3 e8
I would like to display them as:
m1 e1
e2
e3
e4
m2 e5
e6
m3 e7
e8
How to best do this with sql?
I would like to produce this list with sql and then transform it to xml.
Thanks.Since you did not use tags it is not clear what results should be:
SQL> WITH TBL AS (
2 SELECT 'm1' me, 'e1' ei FROM DUAL UNION ALL
3 SELECT 'm1' me, 'e2' ei FROM DUAL UNION ALL
4 SELECT 'm1' me, 'e3' ei FROM DUAL UNION ALL
5 SELECT 'm1' me, 'e4' ei FROM DUAL UNION ALL
6 SELECT 'm2' me, 'e5' ei FROM DUAL UNION ALL
7 SELECT 'm2' me, 'e6' ei FROM DUAL UNION ALL
8 SELECT 'm3' me, 'e7' ei FROM DUAL UNION ALL
9 SELECT 'm3' me, 'e8' ei FROM DUAL
10 )
11 SELECT CASE ROW_NUMBER() OVER(PARTITION BY ME ORDER BY EI) WHEN 1 THEN ME ELSE NULL END ME,
12 EI
13 FROM TBL
14 ORDER BY TBL.ME,
15 TBL.EI
16 /
ME EI
m1 e1
e2
e3
e4
m2 e5
e6
m3 e7
e8
8 rows selected.or
SQL> WITH TBL AS (
2 SELECT 'm1' me, 'e1' ei FROM DUAL UNION ALL
3 SELECT 'm1' me, 'e2' ei FROM DUAL UNION ALL
4 SELECT 'm1' me, 'e3' ei FROM DUAL UNION ALL
5 SELECT 'm1' me, 'e4' ei FROM DUAL UNION ALL
6 SELECT 'm2' me, 'e5' ei FROM DUAL UNION ALL
7 SELECT 'm2' me, 'e6' ei FROM DUAL UNION ALL
8 SELECT 'm3' me, 'e7' ei FROM DUAL UNION ALL
9 SELECT 'm3' me, 'e8' ei FROM DUAL
10 )
11 SELECT CASE ROW_NUMBER() OVER(PARTITION BY ME ORDER BY EI) WHEN 1 THEN ME ELSE EI END ME,
12 CASE ROW_NUMBER() OVER(PARTITION BY ME ORDER BY EI) WHEN 1 THEN EI ELSE NULL END EI
13 FROM TBL
14 ORDER BY TBL.ME,
15 TBL.EI
16 /
ME EI
m1 e1
e2
e3
e4
m2 e5
e6
m3 e7
e8
8 rows selected.
SQL>
SY. -
Table with DropDownBox with data from child node
Hi,
I have following context:
Node Parent (0..n)
-- Node Child (0..n)
Child Attribute 1
Child Attribute 2
-- Parent Attribute 1
-- Parent Attribute 2
The parent node has a child node with cardinality 0..n. Now I created a table from the Parent node with several columns. In one column is a
DropDownBox that should display the data of the Child node, depending on the Parent node element.
Parent | Parent DropDownBox |
Parent 1 | Parent 1 Child Attribute 1 |
Parent 1 Child Attribute 2
Parent 2 | Parent 2 Child Attribute 1 |
Parent 2 Child Attribute 2
How can I fill the child node with data depending on the parent node element? How is the mapping between both?
IParentElement parentElement;
IChildElement childElement;
while (rs.next()) {
parentElement = wdContext.createParentElement();
parentElement.setAttribute1(rs.getLong("ID"));
parentElement.setAttribute2(rs.getString("SYSTEM"));
wdContext.nodeParent().addElement(parentElement);
while (rs2.next()){
childElement = wdContext.createChildElement();
childElement.setAttribute1(rs2.getLong("ID"));
childElement.setAttribute2(rs2.getString("NAME"));
wdContext.nodeChild().addElement(childElement);
If the child node is non-singleton I have the following option
parentElement.nodeChild.addElement(childElement);
But this doesn't work for singleton nodes. How can I do something similar for singleton nodes?
Thanks for your help,
AndiNot quite correct.
You can add more than one <b>element</b> to a singleton node (if cardinality is *:N).
But a singleton child node exists only once per parent <b>node </b>and not once per parent <b>element</b>.
That's an important difference.
Armin -
Problem with childs nodes and automatic key mapping in a Data Object
Hi experts!
I'm doing the service order tutorial from the mobile help at [this link|http://help.sap.com/saphelp_nwmobile71/helpdata/en/21/9b5b924c3b434fba4767731794b029/frameset.htm] and I have a problem...
In the topic "Modeling the Equipment Data Object", says you have to mark the "Automatic Key Mapping" checkbox. So when I had to create a third child node ( the location node ) the system raised an exception with the message "Deselect automatic key mapping flag for more than two-level nodes". I'm trying deselecting the flag and creating the location node, but when I want mark again the automatic key mapping flag, this is disabled.
What can I do to solve this and create the three child nodes with the flag marked? It's a configuration thing?
Any help it's very welcome. Thanks in advance.
Best regards,
Simon.The thing is: Its not allowed to use automatic keymapping if you have more than two levels. This is why the message showed up, and this is why its been disabled.
What automatic keymapping does: Figures out automatically which child node belongs to which parent (by guessing from the field name and type, which fields in the child correspond to which key fields of the parent).
On three levels, this becomes more complicated => Its disabled.
How to do keymapping yourself instead of having the DOE do it automatically: Do 'Explicit keymapping' from each child to its parent. Explicit keymapping is done by clicking on the corresponding menu button in the child node. Here you need to associate child node fields (they need not be key fields of the child, but they are allowed to be that as well) to each of its parent nodes key fields (so that each child can be associated to its parent).
Cheers -
Create root node and child nodes while downloading data from internal table
Hi all,
i have to down load the details of three materials present in the internal table into
a XML file, the material number must be the root node, ERNAM,AENAM,VPSTA
fields must be its child nodes. in this way i have to display details of three
materials like material1,material2,material3.
how can i do that in 4.6c version.
Thanks,
satish.Hi Satish,
Please look into the following programs. These are sample SAP programs to deal with XML in 46c.
BCCIIXMLT1
BCCIIXMLT2
BCCIIXMLT3
Hope these will helps,
Sumant. -
Find the grand parent of child node
Hi gurus,
I have a table with the following structure
Supp_Num Parent_Num Inidicator
1 Null 0
2 1 1
3 2 1
4 Null 0
5 4 1
For all the parent Nodes the indicator will have '0'
For all the child Nodes the indicator will have '1'.
I want to write a sQL code where i provide a child name and it traces back to its root parent . For eg if i provide the procedure with Supp_Num=3 it should traverse back to 1 and give 1 as output
Thanks in advance9ba2a86d-5f7e-4e53-99ee-d675435c2efd wrote:
Thanks for the reply but i'm expecting Supp_Num =4 as well since its parent for Supp_num=5 . Also i want to write it in a Stored Proc form where i just provide the
Supp_num as input and i get the root parent node as output.
Thanks in advance
You wrote in your original post
I want to write a sQL code where i provide a child name and it traces back to its root parent . For eg if i provide the procedure with Supp_Num=3 it should traverse back to 1 and give 1 as output
And my solution did exactly the same. Now if you want the Root details for SUPP_NUM=5, it will provide the root node for same. See below:
with data as
select 1 supp_num, null par_num, 0 ind from dual union all
select 2 supp_num, 1 par_num, 1 ind from dual union all
select 3 supp_num, 2 par_num, 1 ind from dual union all
select 4 supp_num, null par_num, 0 ind from dual union all
select 5 supp_num, 4 par_num, 1 ind from dual
select *
from (
select supp_num, par_num, ind
from data
start with supp_num = 5
connect by supp_num = prior par_num
where par_num is null;
SUPP_NUM PAR_NUM IND
4 0
You just need to set the START WITH clause with appropriate SUPP_NUM. -
How do I create multiple types of child nodes in ADF Faces Tree Component
Hi,
I am trying to construct a tree using ADF Faces. The tree I am trying to develop should look something like:
- Departments
+ Dept 10
+ Dept 20
+ Dept 30
+ Dept 40
- Employees
+ SCOTT
+ALLEN
+ BLAKE
The nodes shown at the top level should serve as labels, indicating the various types of nodes available.
I have created the top level RootLabelsViewObj, with a SQL clause:
select rn, node_label
from (
select 1 rn
, 'Employees' node_label
from dual
union all
select 2 rn
, 'Departments' node_label
from dual
union all
select 3 rn
, 'Bonusplans' node_label
from dual
I have created ViewLinks between the RootLabelsViewObj and the DeptView and EmpView respectively (created on top of DEPT and EMP table in SCOTT schema), based on the LABEL attribute in the RootLabelsViewObj and with ViewLink SQL specified like:
:Bind_NodeLabel = 'Departments' for the link with DeptView and :Bind_NodeLabel = 'Employees' for the link with EmpView.
In the ADF BC Application Module Tester, I get exactly what I want.
However, when I create a JSF JSPX page and drag the RootLabelsViewObj from the Data Control Panel to the page as ADF Tree, I run into a little issue: it seems like I cannot create a second Branch Accessor rule for the RootLabelsViewObj1: I have created a first Branch Accessor Rule referring to DeptView and now try to create a second one for EmpView, to allow Employees to be displayed under the root label "Employees" - but I cannot.
The PageDefinition looks like:
<tree id="RootLabelsViewObj1" IterBinding="RootLabelsViewObj1Iterator">
<AttrNames>
<Item Value="Rn"/>
<Item Value="NodeLabel"/>
</AttrNames>
<nodeDefinition DefName="model.RootLabelsViewObj"
id="RootLabelsViewObjNode">
<AttrNames>
<Item Value="NodeLabel"/>
</AttrNames>
<Accessors>
<Item Value="DeptView"/>
</Accessors>
</nodeDefinition>
<nodeDefinition DefName="model.EmpView" id="EmpViewNode">
<AttrNames>
<Item Value="Ename"/>
</AttrNames>
</nodeDefinition>
<nodeDefinition DefName="model.DeptView" id="DeptViewNode">
<AttrNames>
<Item Value="Deptno"/>
</AttrNames>
</nodeDefinition>
</tree>
Does anyone know:
- whether it is possible (intended) to have more than one branch accessor per node (i.e. more than one type of child under a node in the tree)
- if so, how this can be achieved?
Right now it looks like I am limited to each node in the tree having only one type of child node.
Please tell me I am wrong.
best regards,
LucasGive this a shot mate
event.getNativeEventTarget();That will allow you to access the DOM object directly
Id can be retrieved via
event.getNativeEventTarget().id; -
Getting the value of a child node in an array
How do you get the value of a child node in an array titled "entries"? I used to do this in AS2, and now I'm trying in AS3. To top it off, I'm forced to use an XML format I'm unfamiliar with. So I'm not sure how to access these nodes in AS3. An example of the XML is;
<Row>
<Cell><Data ss:Type="String">Absorption Areas</Data></Cell>
<Cell><Data ss:Type="String">Drain fields where left over liquid from the septic system soak into the ground.</Data></Cell>
</Row>
How would I access ether of the <Cell> rows?
ThanksGiven that you declared ss namespace (otherwise it will throw an error) you have two options:
xml.Cell[0].Data - will output:
Absorption Areas
xml.Cell.Data will output:
<Data ss:Type="String">Absorption Areas</Data>
<Data ss:Type="String">Drain fields where left over liquid from the septic system soak into the ground.</Data>
So, xml.Cell.Data[1] will output:
Drain fields where left over liquid from the septic system soak into the ground. -
How do I include/show data from a child table in a Modal Window?
How do I show data from a child table in a Modal Window?
I have an application where each customer might have multiple addresses and phone numbers which are stored in child tables. When I show the customer in a record on a screen I can place a Modal Window button on the screen which can be pushed at runtime
to display detail information for the particular customer parent table which works great. However, I would also like to display the data from the address and phone number child tables. Is there a way to do that? Or can I just launch a hole separate screen
which would automatically display the needed data for the particular customer? If yes, how?
Thank you for any help.I am not even sure how to describe my situation in such a way that this forum incident would be of benefit to other people as I think it is fairly unconventional.
The “add contactaddress” link does not show up on the right.
The contactaddress table is a child of the contact table.
The contact table is a child of the contactlink table.
And the contactlink table is a child of the person table.
I have it set up this way because the contact in the contact table may be a contact to multiple persons in the person table and I do not want to re-enter the contact info every time the contact is used.
In the list detail screen of the person table I can see the contactlink child collection so that I can see the name of the person in the contact table at runtime. However, the contactaddress collection is not related to the person table so it does not show
up on the right hand side of the design screen as an “add contactaddress”; nor is there “add contact” link.
What I would like to happen during runtime is that it is not necessary to switch screens from the person list detail screen to a contact list detail screen to see the addresses and phone numbers for the contact.
Is my setup unnecessarily convoluted? Is there a better way? Please see the two snapshots below.
Perhaps there is a way to call up a Detail screen from the List Detail at runtime?
Anyway, if you are still reading, thank you very much for your help.
jjjjj -
How to find out if a NODE has any CHILD NODES in a hierarchical tree?
I want to find out programmatically if a node in a tree has CHILDREN.
My requirement is this: I want to only show nodes for which the user has permission to execute the program that node is associated with.
Problem is, my tree population query will not show the child nodes, BUT the sub-menu nodes are displayed and I need to get rid of these nodes.
There is a function to find out the PARENT of a tree node (FTree.Get_Tree_Node_Parent), but noting to find out if children exist for a node or not?
What I thought of was to display the tree and then traverse it from the ROOT onwards and then if a NODE is a submenu node (I can find this out by checking the PROGRAM value. If this is NULL it is a sub-menu node) and IF IT HAS NO CHILD NODES then I can delete the node.Please provide the examples with DATA
as far as i know we cannot get the Child Nodes but NODE's Parents we can get
parent_node := Ftree.Get_Tree_Node_Parent(htree, :SYSTEM.TRIGGER_NODE);I faced the similar problem but i solved it with query.
Provide the data and your Tree query then we can help -
Need to chart attribute value of just one child node of XML document
I have a XML document with (for example) 7 parent nodes, each
parent node has 5 child nodes. The parent nodes have an attribute
@EarlierDTS (DateTime type) that is the x-axis category of a chart.
Each child node has an attribute @eventid which specifies the id of
the event, and another atttribute @NumOccurs which specifies how
many times that event occured in that period.
How do I tell Flex I want a simple line chart of the eventID
= 215? What if I want two lines, for both eventID=215 and
eventid=307?
I have studied the posts and blogs for over a week now, and
have seen this question or similar come up quite a few places, with
no answer.
1) Should I focus on learning how to create a filterfunction
for the XMLList that underlies my XMLListCollection so that the
filtered data view is just one child node per parent node ( or two
child nodes for the second case)? And set the filtered data view as
the dataprovider of my chart's vertical series?
2) Should I focus on learning how to create a XML Filter
query that selects just one or two child nodes for each parent
node, and set the charts' series' dataprovider to this filter
expression? (I don't think this is allowed - but I'm checking with
the forum members...)
3) Should I focus on learning how to convert the
XMLListCollection into a HierarchicalData object, and then learning
how to filter this object so there is only one (or two) childs per
parent? This seems like a lot of coding - I almost have to create a
pair of classes - one for the parent and one for the child - so I
can create nested ArrayObjects.
4) Should I create a brand new XMLList by walking the
original XML list, and inserting Parent nodes and just the child
nodes that match the eventID(s) I want to chart, into the new
XMLList?
I believe that the easiest way would be to create a
Filterfunction for the XMLList, and bind the chart series to the
(filtered) XML List. But the problem with this approach is that I
have seen more than 2 posts asking how to accomplish filtering that
removes specific children from the view, with no solutions posted.
Help! What is the best way to get just one child for each
parent, from an XMLList?"whertzing" <[email protected]> wrote in
message
news:[email protected]...
>I have a XML document with (for example) 7 parent nodes,
each parent node
>has 5
> child nodes. The parent nodes have an attribute
@EarlierDTS (DateTime
> type)
> that is the x-axis category of a chart. Each child node
has an attribute
> @eventid which specifies the id of the event, and
another atttribute
> @NumOccurs
> which specifies how many times that event occured in
that period.
>
> How do I tell Flex I want a simple line chart of the
eventID = 215? What
> if I
> want two lines, for both eventID=215 and eventid=307?
>
> I have studied the posts and blogs for over a week now,
and have seen this
> question or similar come up quite a few places, with no
answer.
>
> 1) Should I focus on learning how to create a
filterfunction for the
> XMLList
> that underlies my XMLListCollection so that the filtered
data view is just
> one
> child node per parent node ( or two child nodes for the
second case)? And
> set
> the filtered data view as the dataprovider of my chart's
vertical series?
>
> 2) Should I focus on learning how to create a XML Filter
query that
> selects
> just one or two child nodes for each parent node, and
set the charts'
> series'
> dataprovider to this filter expression? (I don't think
this is allowed -
> but
> I'm checking with the forum members...)
>
> 3) Should I focus on learning how to convert the
XMLListCollection into a
> HierarchicalData object, and then learning how to filter
this object so
> there
> is only one (or two) childs per parent? This seems like
a lot of coding -
> I
> almost have to create a pair of classes - one for the
parent and one for
> the
> child - so I can create nested ArrayObjects.
>
> 4) Should I create a brand new XMLList by walking the
original XML list,
> and
> inserting Parent nodes and just the child nodes that
match the eventID(s)
> I
> want to chart, into the new XMLList?
>
> I believe that the easiest way would be to create a
Filterfunction for the
> XMLList, and bind the chart series to the (filtered) XML
List. But the
> problem
> with this approach is that I have seen more than 2 posts
asking how to
> accomplish filtering that removes specific children from
the view, with no
> solutions posted.
>
> Help! What is the best way to get just one child for
each parent, from an
> XMLList?
I'd just look at a dataFunction. There's an example here that
may point you
in the right direction:
http://flexdiary.blogspot.com/2008/08/charting-example.html
HTH;
Amy -
Check the value of attribute of a child node in datatype xmltype.
Hello,
I have a xml stored in column having datatype as "XMLTYPE"
<?xml version="1.0" encoding="ISO-8859-1"?>
<Settings>
<Setting Name="A1" Value="N"/>
<Setting Name="A2" Value="N"/>
<Setting Name="A3" Value="SOMEVALUE"/>
<Setting Name="A4" Value="N"/>
<Setting Name="A5" Value="Y"/>
<Setting Name="A6" Value="N"/>
</Settings>I do not want to loop into each child node. But want to find out if the value of setting A5 is Y or N? Is there a way I can find that without doing the extract of "Setting" child node and then looping each node to find the value?
Regards,You didn't specify your version of Oracle so here are two options. If 10.2 or greater, use XMLTable, else use the ExtractValue option.
-- The WITH simply simulates your existing table that I do not have.
WITH fake_tab AS
(SELECT XMLTYPE('<?xml version="1.0" encoding="ISO-8859-1"?>
<Settings>
<Setting Name="A1" Value="N"/>
<Setting Name="A2" Value="N"/>
<Setting Name="A3" Value="SOMEVALUE"/>
<Setting Name="A4" Value="N"/>
<Setting Name="A5" Value="Y"/>
<Setting Name="A6" Value="N"/>
</Settings>
') tab_col
FROM dual)
-- For 10.2 and higher use this SELECT
SELECT a5
FROM fake_tab,
XMLTABLE('/Settings'
PASSING fake_tab.tab_col
COLUMNS
a5 VARCHAR2(10) PATH 'Setting[@Name="A5"]/@Value');
-- For 10.1 and before
SELECT ExtractValue(tab_col, '/Settings/Setting[@Name="A5"]/@Value')
FROM fake_tab; -
Mapping tool: mapping child nodes (level2 hierarchy) to bapi wrapper fields
Hi,
I'm new to MI7.1. I'll try the demo on help.sap.com. I have following data object EQUIPMENT with node structure in DOE:
ROOTNODE (attr: EQUIPMENT_ID/ SERIAL_NO)
child node level 1 DETAILS (attr: SERIAL_NO/TYPE/BRAND/INSTRUCTIONS)
child node level 2 LOCATION (attr: SERIAL_NO/ADDRESS_LINE1/
ADDRESS_LINE2/ZIP_CODE/...)
In backend my bapi wrapper is build using structures:
TOP: ZSEQUIPMENT (attr: EQUIPMENT_ID/SERIAL_NO)
010: ZSEQUIPMENT_DET(attr: SERIAL_NO/TYPE/BRAND/INSTRUCTIONS)
020: ZSLOCATION(attr: SERIAL_NO/ADDRESS_LINE1/...)
When i want to use mapping tool in middleware for the backend adapter, after mapping the fields, during activation i get the error:
Referential integrity between node DETAILS and it's parent is not complete.
Referential integrity between node LOCATION and it's parent is not complete.
What does that mean? How can I solve this?
thanks
PeterSolved it myself with explicit key mapping. thanks anyway
-
How to assign ALV for parent node and child node that uses supply method.?
HI Dear friends,
I need to display header details ( VBAK ) and Item details ( VBAP ). I have created two node like HEADER_NODE inside this i have created ITEM_NODE for this item node i use supply function 'GET_ITEMS' any way it is working only when crete two separate table and binding but when i come to work with ALV i am totally confused .. i have created two 'View Controller UI Elements' when i try to map HEADER_NODE it mapped properly but for ITEM_NODE it shows mapping already defined. return status message as 'Action Cancelled' . In result both ViewContainer shows only HEADER_NODE data only.
How to achive ALV for Parent, child node that uses supply function ? ?
Thank youDelete Mapping is not enabled, that means there is no mapping done yet.
I just tried what you are saying and the application works and i am able to map the header table and item table and also again i could map the tables any number of times.. i didn't get any such message, sorry i couldn't recreate the scenario. might be there is something wrong in the context.
i just did it like this.
Please also move this to Web DynPro Discussion, Hope that would be helpful.
Message was edited by: Syed Ghulam Ali
Maybe you are looking for
-
I am on 10.4.11. Since the day I bought my computer and Airport Extreme, it's been intermittent. I have no choice right now but to use it. My Ethernet port is broken. Yet every 10 minutes to a half hour, my connection drops for a period of about 5 se
-
I have been charged for an app i dont have and judging by the name i wouldnt be interested in having, how can i get my money back?
-
How can I recover a game I deleted by mistake without paying again?
I bought Grand Theft Auto:Chinatown Wars a week ago. Today while moving my apps around, I accidently deleted it. When I go to redownload it, it says that I need to pay and that I never bought it before. How can I fix this problem?
-
Hi - I am trying to import images into FCE but am having a difficult time. I have clipped around a medicine ball and gotten rid of the background, so that it in the video it would appear as though I am holding the medicine ball. When I bring the im
-
Cannot purchase movies on my MacBook
I have a MacBook Pro with the latest version of iTunes. I can buy music from the iTunes store no problem, but I want to buy a movie and the option to purchase it is greyed out. I have tried a few different movies and TV programmes and it's the same