Strange but True

Hi All
Below are the 2 exactly same code to send Email :
CODE 1:_
BEGIN
UTL_MAIL.send(
sender => '[email protected]'
,recipients => '[email protected]'
,subject => 'Testing email'
,message => 'Dear :
Sending email from Oracle
Mailfully Yours,
Mudassir'
END;
CODE 2:_
BEGIN
UTL_MAIL.send(
sender => '[email protected]'
,recipients => '[email protected]'
,subject => 'Testing email'
,message => 'HERE THERE is a PROBLEM'
END;
When i change the "MESSAGE"i am getting the errror ORA-29279: SMTP permanent error: 550 5.7.1 Requested action not taken: message refused .
What may be the reason.
Regards,
Mudassir
Edited by: Mudassir on Mar 27, 2010 3:38 PM

Hello Mudassir,
When i change the subject i am getting the errror ORA-29279:IN your code above i see the subject is the same.
Or are you saying when you change the Message you get that error, because the message in your 2 codes above is different.
Also is this the copy paste?
May be your server rejects with certain words in the message (Assuming the messga in the actual
mail you are sending is differne than given below)
Case 2:
When you try next try this
Execute the second code first and then the first code.
If your first code fails, that means your SMTP expects some delay between messages sent from the same user or IP.
Hope it helps.
Kind Regards,
Bhushan

Similar Messages

  • Strange But True can anyone explain????

    I have used a Time Capsule for sometime now as backup , shared drive and Network. and i have only ever been able to access it for my iphoto and itunes (300gb of photos and music) from the TC wifi network.
    then tonight i have been able to access my TC fully through my BT Homehub and also use printers connected to that network get my iphoto file and also my itunes music , but not able to use my speakers on my airtunes network.
    the only change i have made is adding an HP all-in-one printer , scanner etc to the BT network.
    and if i change network to the TC i can not use the printer that is connected on the BT network.
    and also i can not use or see the printer connected to the TC if i am on the BT network.
    and light that you may be able to shed would be most apppreciated

    Normally you would connect the Time Capsule wirelessly to your network as a wireless client. In that mode, anyone on the network would be able to use any of the Time Capsule services.
    If you connect the Time Capsule via Ethernet to your existing network, you would need to configure the Time Capsule to act as a bridge (not sharing a single IP address) to get the same ability.

  • Strange but true - need help!

    My project in iMovie is 19GB.(due to photos) Exported to Quicktime it is 2.5 GB but it you get movie info whilst open in Quicktime it is 4.97.
    If I launch directly in iDVD it seems to be 0.4 (best quality). If I burn it, it quits about 90% of the way thro' and the DVD seems full.
    I originally suspected a glich so I exported to QT then imported to iDVD (0.4 again). I am trying to loop it but either way it quits, the DVDs both play but finish at exactly to same frame (about 90%)
    I preview it in iDVD it plays and loops. I have archived the project and it is 4.97GB. Yet the movie is only 12 minutes long.
    Welcome any ideas or help. This is a Promotional School DVD that I am desperate to finish.

    My project in iMovie is 19GB.(due to photos)
    Exported to Quicktime it is 2.5 GB
    What form of QuickTime file? What you want is
    'full-quality', DV video.
    A 12 minute QuickTime movie in DV form should be
    about 2.6 GB in size. When put on a DVD is Best
    Performance mode, it should take about 1 GB when the
    theme content is taken into account.
    Yes, it is infact 2.49 GB according to preview. I exported it using full-quality as you suggest. I have been burning DVDs since at least Spring '02, so to produce two coasters on the run is a bit of a surprise! As I have burnt 60 minute DVDs of about 4GB I would expect about 1-1.5 Gb at most. I have checked the DVD in preview it runs OK. I am beginning to think it has something to do with the photos, their original size and final size on rendering. 19GB for a movie project also seems excessive.
    Still puzzled.
    Thanks, Geraint

  • STRANGE but TRUE! This is really happening...

    I can't figure this one out. I hope someone can help. My iMac suddenly hates the internet with a passion. It started happening after I downloaded iTunes 5.0 with the albumn "yello - the eye".
    First off, I have had to hold down the power button to shut down my frozen iMac 4 times in the past 2 days. When I reboot, the boot music is gone, my volume display is gone, it locks up with Safari, Firefox, Mail, etc. and I can't seem to run any software having to do with the internet as well as any other software. I can only open and use about 2 programs at a time (if I'm lucky) that have nothing to do with the internet such as Word & photoshop, but when those hang, force-quit won't even open and I can't shut the system down except for the power button.
    Now get this, as soon as I unplug my cat5 cable from the back of my iMac, everything suddenly works fine, my volume display returns, other programs open up just fine, I can now force-quit, and when I reboot, the mac music/sound plays.
    What in the world is going on??? Please help. Thanks

    Hello AgeMaker!
    I don't know if anybody has asked you to do this, but try this. Go into your hard drive, click Applications, go to Utilities, and finally scroll down to Disk Utility. Open that and click on your hard drive under Disk Utility. At the bottom of the window, it will tell you if your hard drive is either "Verified" or "Failed". Verified is good and means that the problems you are experiening aren't with your hard drive, but if it is failed you hard drive is dying and you will need to back up all your data and contact AppleCare to get the drive replaced.

  • Strange but probably easy problem

    Strange but probably easy problem...
    I have made two pages recently. One for a company and one for
    a game I'm making during my spare time. I have made them both in
    the same way with an html page for every side.
    The problem is that when it changes sides... On the first
    page I made it looks like it leaves the back ground graphic and
    just reload the text that has changed... this is how I want it to
    be. But on the second it loads the backgrounds's every time...
    These are the links... I hope someone understands what I mean
    1st page www.ardent.se
    2:nd page www.indylc2.com

    cjh81 wrote:
    > Strange but probably easy problem...
    >
    > I have made two pages recently. One for a company and
    one for a game I'm
    > making during my spare time. I have made them both in
    the same way with an html
    > page for every side.
    >
    > The problem is that when it changes sides... On the
    first page I made it looks
    > like it leaves the back ground graphic and just reload
    the text that has
    > changed... this is how I want it to be. But on the
    second it loads the
    > backgrounds's every time... These are the links... I
    hope someone understands
    > what I mean
    >
    >
    > 1st page www.ardent.se
    > 2:nd page www.indylc2.com
    >
    it's the same, but the first page loads faster than the
    second.
    seb ( [email protected])
    http://webtrans1.com | high-end web
    design
    Downloads: Slide Show, Directory Browser, Mailing List

  • It's Strange but its true...

    Hi,
    i'm implementing a form. In this form there are two panels with different layouts. The first one has a Cardlayout: lets call it cLPanel
    JPanel cLPanel = new CLPanel();
    The second one contains a ScrollPane: lets call it scrollPanel
    JPanel scrollPane = new ScrollPanel();
    //booth panels extends JPanel
    I want to add a the same panel to both panel so i do the following:
    AddressPanel addressPanel1 = new AddressPanel();
    AddressPanel addressPanel2 = addressPanel1;
    CLPanel cLPanel.addl(addressPanel1);
    ScrollPanel scrollPane.add(addressPanel2);
    The problem is that the AddressPanel does not appear on any panel;
    Unless i create a second AddressPanel and i use it for one of the two panels (CLPanel or ScrollPanel);
    I want to use the reference to the same object because a change to appear in all the panels;

    yes you cannot do this:
    AddressPanel addressPanel1 = new AddressPanel();
    AddressPanel addressPanel2 = addressPanel1;
    you never add same reference in two places.
    bye

  • Alarm........strange but I cannot find....

    Hi all,
    I am having a very strange thing happening on my E71. I have set an alarm during the very early days of my E71 usage. At one point I stopped seeing it in my calendar, time applet etc but it still rings on a daily basis.
    I have used the search feature of the phone too to locate it but it persists. I do not have any third party application which has any alarm set either.
    Anyone have any idea how I can go deeper into this ?
    ...thanks!

    It could be an alarm of a note like meeting notififaction you inserted ?

  • Impossible but true startup problem/solution

    My girlfriend's ibook G3, 700 mh processor, 384 ram, running 10.2.8 starting having problems. The ball would spin forever… one day while in the Mail program the ball spun and spun and she finally held down the power button till the thing shut down. When she tried to turn it back on, it gave the chime, greyscreen with apple and spinning gear… and never went past that mark. If you let it run for an hour or so, it would eventually go to the black Darwin screen and ask for a password. I started it up from the install disk, ran DU, it said all was well. Attempts to reboot resulted in the spinning gear forever and/or Darwin. I ran fsck numerous times; always told me the volume appeared to be OK. I attempted to start up from the install disk again -- wouldn't do it. I ran fsck some more. All OK. I tried starting up in safe mode -- it took a LONG time, but finally did. I backed up all the files onto an external HD. Restart: back to the spinning gear. After numerous repeats of all this, I managed to start up again from the install disk -- so I chose Archive and Install and clicked continue. It ran through it's whole cycle, restarted to the spinning gear. I restarted to the disk, this time it worked for awhile, then said it was examining the target disk and predicted 8 hours, then 10 hours, then 13 hours -- and then all of a sudden it ran through everything and finished and restarted. Got a nice blue screen and request to insert disk 2. Did so and it installed all the rest and then the HD and all the files and apps reappeared magically! Found a previous systems folder too, as predicted. But what I can't understand is this: the system returned to 10.2.1, which was what it was when she bought it. BUT -- all the non-Apple software she had is STILL THERE and STILL RUNS. Microsoft Office, airport (which didn't come on the original disks), some other apps. How is that possible? While Netgear, for example, appears as the airport connection, and works fine -- although the Netgear software is nowhere to be found!
    It's been running now for several hours and seems more or less OK. But every so often it is quite SLOW, particularly in the mail program. VERY SLOW.
    Strange, huh?

    Archive/install option doesn't wipe your disk. All your third party software should still be there. Here is a link to the FAQ "Installation Options and Their Meaning"
    http://discussions.apple.com/thread.jspa?threadID=121995

  • Here's my story sad but true!

    Firstly my spec
    27-inch, Mid 2011
    Processor  3.1 GHz Intel Core i5
    Memory  4 GB 1333 MHz DDR3
    Graphics  AMD Radeon HD 6970M 1024 MB
    Software  OS X 10.8.3 (12D78)
    I bought my imac in Nov 2011, not quite a year later I got the pink screen of death (I followed instructions to remedy) all seemed fine for a little while then when I played World of Warcraft it would crash. The mac would seem to be quite hot (top right of casing) anyway I took it back to the Apple shop, they looked it over told me there was nothing wrong. Seemed ok for a while but now my mac crashes even when not gaming. I have had every sort of crash I think possible, black screen, grey vertical pinstripe, black screen but can still hear everything I was watching ok, stuttering screen etc etc so I have to reboot to get back.
    I did AHT, utility repairs, upgrade from lion to mountain lion erased & clean installed hoping that would fix it but no! tried smc fan fix but it won't let me get into that?
    So I am guessing (I am a noob not an IT expert) that something major is wrong with the graphics.
    I am also guessing a trip back to the apple store is imminent, at my expense (as I am now out of date for warrenty etc)
    Any ideas? Help?
    Just call me Dr Graphic-berg (iceberg ahoy!)

    I am also guessing a trip back to the apple store is imminent, at my expense (as I am now out of date for warrenty etc)
    Worth a shot:  Since you are only 5 months out of warranty, call Apple Customer Relations.  Tell them exactly what you stated in your posting (politely).  If you have any receipts or paperwork documentation from your trips to the AS tell ACR.   See what they can do for you!
    GOOD LUCK!!!! 

  • Strange but anoying bug!

    hi ppl it seems for mr that when i log in trow gdm it doenst load my color background...i have everything on black..but still it remaisn blue..can anyone have any ideias how to change this? since last gdm update that this is like this

    There's also qingy, wdm.

  • K7N2G-ILSR sad but true

    after 6 proud month of owning this board.........i must say my time with msi has almost ended. the board has given up on the most important part of her duty and thats the SATA connection..... when i first got the board there were 2 connectors. well 1 didnt work off the bat, so i had 1 working which was fine cuz i only had 1 drive. heres wut drove me oever the edge. just a few days ago the MOBO wont detect MY ONLY SATA maxtor 80gb , but after continuously pressing the power. it finally came up, it almost felt like winning the lottery.but days later it seems no matter how many times i press that power button. it just wont detect. i have gotten a new drive from the nice people at maxtor with the same result. and my delta doesnt have the sata connection...so my question is to u'll could it be the cable is bad or is it the mobo.

    Read the blue link in my signature and then make your self one like mine.
    The only way to answer your question is try replacing the cable and then if that does not work swap the motherboard, you could have a bad one, that does happen to everyone at some point, with EVERY manufacturer.
    Try the latest BIOS for your motherboard lately?
    Come back with the rest of the info we need to help you better.

  • AT&T; sad but true

    My family had been customers of AT&T for 10 years. We moved to a different town approximately one year ago. AT&T coverage in the new town was supposed to be acceptable but we constantly battled dropped calls, etc. We tried the booster that AT&T recommended which did not help much. We were forced to shop around for a different cell company that would provide coverage that my husband needed to run his business out of our home. Long story short, we did switch providers. We left AT&T in good standing. No outstanding balances, etc. We ended our service with AT&T 4 days into a new billing cycle. One of our five phone lines was still under contract for which we owed AT&T $400. I completely understand the $400 charge but they are also charging us for the whole 30 days of that new billing period even though we only had service for 4 of the 30 days. I attempted to talk to customer service who refused to look into prorating the monthly charge to reflect only those days that AT&T actually provided us service. I'm sure AT&T has a legal explanation but sometimes ethics in a situation is just as important as the legal aspect. It's really sad that a major corporation would run a business in this fashion. Be very careful if you cancel service with AT&T. If you cancel even one hour into the next billing cycle, you will be charge for the whole month.

    Yes, it is in the terms of service that AT&T (and all the other providers) will not prorate the final month's service. Yes, it would be ethical if they would prorate the final month but I don't think that is going to happen.

  • Sad but True

    Hello all! new to this forum, and my first post is for help :S. Well my problem is that im using Netbean IDE and ime trying to use scanner to get input from the keyboard but i dont kno where to put it :(.
    Any help is appreciated.
    P.S im wondering how do i get app to work outside the console of the IDE ?like i would like to see the app on the command prompt or something beside the output screen of NetBean IDE. Much Thx!

    Hello all! new to this forum, and my first post is
    for help :S. Well my problem is that im using Netbean
    IDE and ime trying to use scanner to get input from
    the keyboard but i dont kno where to put it :(.Hint: don't use Netbeans. Otherwise: try writing into the same area where System.out prints its messages to. Works in most IDEs, I'd say.
    This isn't a Netbeans forum, btw. http://www.netbeans.org
    P.S im wondering how do i get app to work outside the
    console of the IDE ?
    java -classpath . mypackage.MyClasshttp://java.sun.com/docs/books/tutorial/getStarted/cupojava/win32.html

  • Gross but True - Mold on the Flat Surface Near the keyboard.

    OK, yes, I may have slightly more sweaty then average hands, but still...
    I can see these small blue splotches forming where my palms rest during typing, on the large flat areas below my keyboard.
    I dont' want to use bleach on that surface, any suggestons on what to use to remove this?

    Anodized aluminum is usually pretty inert, but there is the occasional person whose skin chemistry will actually start to react and leave permanent marks. There may not be any way to remove these if that is in fact what is happening. It may not be mold, but corrosion. If that's the case, you might have to spring for one of those (Marware I think) protection deals with the palm rest protector.
    Alcohol may not be be capable of removing surface mold. You could also try something like a 409 wipe or even a bit of ammonia based cleaner or Lysol on a soft cloth. Do NOT use bleach as it would attack the aluminum. Do NOT use acetone as it would attack any painted or plastic parts.
    But if there is actual corrosion and the spots are actually tiny pits, I don't know of anything that will make them go away. You might want to examine the surface closely under magnification and see if you can tell.
    Good luck!

  • Autofill Issue - Kinda' strange, but maybe not

    I was wondering if anyone else is having this problem - I just purchased a Shuffle today, and when I use the "Autofill" function, with "Replace all songs" checked, it only replaces some songs from Shuffle. Yes, I am autofilling from my library and not a smart playlist. I have tried restoring my ipod's defaults but it still only randomly replaces a portion of the songs on the Shuffle, not all of them. I was thinking that it is because I only have around 700 songs, but that shoudn't be the case, since the Shuffle only holds between 200 and around 260 if you're lucky (bit rate 128). I also have the random box checked too, as I don't want songs in order from my library to be extracted and put onto the iPod. I hope I haven't confused the heck out of anyone. Like I said, I hope this is a minor problem that someone else may have experienced and not a malfunction with my new toy. Thanks everyone for your time.

    A random replacement from an entire Library will inevitably select some of the same tracks that you already have on there ... hence the randomness. It will, in fact, wind up selecting many more than most folks would expect.
    The "Replace All ..." menu selection doesn't mean that all songs currently in the Shuffle's playlist will be removed and will not be repeated on this load. It's just a short way of designating all of the tracks for possible replacement. If you want to guarantee total replacement then you have to do things differently.

Maybe you are looking for