Strange (for me) applet loading error.

I�m developing an applet on an embedded server and I have been experienced the following error. When I load it from a 100 mbits LAN the applet loads and works well.
But, If I try to open it through 10mBits switch, the applet refuses to work and a lot class of class not found errors appears. (The same from a location outside my LAN)
Can it be a speed related problem?
here is a copy of my htm (myClass is stored inside cab3.cab)
<HTML>
<HEAD>
</HEAD>
<BODY BGCOLOR="FFFF82">
<CENTER>
<APPLET
     codebase = "."
     archive = "cab2.cab, cab3.cab, cab4.cab, cab5.cab"
     code = "myClass.class"
     width = "760"
     height     = "420"
     >
</APPLET>
</CENTER>
</BODY>
</HTML>
Thanks in advance.

A Full trace might help us out:
http://forum.java.sun.com/thread.jspa?threadID=656028

Similar Messages

Javafx applet load error

Hi
i'm getting the following error while loading javafx applet in browser and javafx applet is not loading.Can some one suggest a solution to eliminate this error.
Exception occurred during event dispatching:
java.lang.NoClassDefFoundError: com/sun/javafx/runtime/location/NumericLocation
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Unknown Source)
     at com.sun.javafx.runtime.adapter.Applet.launchStage(Unknown Source)
     at com.sun.javafx.runtime.adapter.Applet$1.lambda(Unknown Source)
     at com.sun.javafx.runtime.adapter.Applet$1.invoke(Unknown Source)
     at com.sun.javafx.runtime.adapter.Applet$1.invoke(Unknown Source)
     at com.sun.javafx.runtime.Entry$2.run(Unknown Source)
     at java.awt.event.InvocationEvent.dispatch(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: java.lang.ClassNotFoundException: com.sun.javafx.runtime.location.NumericLocation
     at sun.plugin2.applet.Plugin2ClassLoader$2.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.plugin2.applet.Plugin2ClassLoader.findClassHelper(Unknown Source)
     at sun.plugin2.applet.JNLP2ClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClassInternal(Unknown Source)
     ... 15 moreThanks in advance,
Naveen

This is the jnlp file i'm using.
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="./" href="videoPlayer.jnlp">
    <information>
        <title>Player</title>
        <vendor>xyz</vendor>
        <homepage href=""/>
        <description></description>
        <offline-allowed/>
        <shortcut>
            <desktop/>
        </shortcut>
    </information>
     <security>
        <all-permissions/>
    </security>
    <resources>
        <j2se version="1.5+"/>
        <jar href="../sisJars/VideoPlayer.jar" main="true" download="eager" />
        <extension name="JavaFX Runtime" href="http://dl.javafx.com/javafx-rt.jnlp"/>
    </resources>
    <applet-desc name="VideoPlayer" main-class="com.sun.javafx.runtime.adapter.Applet" width="646" height="375">
        <param name="MainJavaFXScript" value="com.sis.recordit.jfx.player.Main">
    </applet-desc>
    </jnlp>Thanks

SAP Ticket Verifier for Domino R7 Load Error

Hello All,
i try to run a SAP Ticketverifier with Lotus Domino Server V.7.0 and i catch an Errormessage when i restarting a HTTP-Server
23.07.2008 14:52:08 HTTP Server: Using Web Configuration View
23.05.2005 14:52:08 JVM: Java Virtual Machine initialized.
23.05.2005 14:52:08 HTTP Server: Java Virtual Machine loaded
23.05.2005 14:52:08 HTTP Server: Failed to load DSAPI module c:\winnt\system32\ds_ticket.dll
23.05.2005 14:52:08 HTTP Server: DSAPI Domino Off-Line Services HTTP extension Loaded successfully
23.05.2005 14:52:08 Servlet engine initialization was successful
23.05.2005 14:52:09 HTTP Server: Started
On my Test Mashine 6.5.4, i'v any Problems to Install a Ticket Verifier, now we plan an Update to 7.0, an on my Test Domino , it didn't work. I followed the same Steps as on my Test-Domino, the only difference are the Domino Releases. I'v already tryed a Sollution with msvcr71.dll without result.
I use :
ds_ticket.dll - 2.2.1.0
sapsecu.dll - 5.4.28.5
wpsso_v3.dll - 5.0.2.8
I hope someone can help me

Hi
Sorry, i have no solution for two different DNS-Domains and i think u can't do this with TicketVerifier Solution.
The Ticket Verifier solution is based on browser cookies. The cookie-handling is domain-dependent and the browser only attaches the corresponding cookies to an HTTP request for a particular domain.
- SAP Administration Guide Groupware -
Pehaps u can avoid this using an alias hostname for your domino server, for example i have two different dns names i use to access for my domino server
Many Luck

I want to writte C# code for 503 Service Unavailable error to web application page immediate close connection any page loaded

Here is a ticket regarding our current client web application ( Image data add, edit , delete in folder with form data in MSSQL Database) that using code c#, web form, ajax, VS2008, MSSQL Server2008 , it appears that there is an error where the HTTP
503 error occurs.
. Below is a conversation with Host Server support assistant.Can you take a look at it?
Ben (support) - Hi
Customer - We're having an issue with our windows host
Ben (support) - What's the issue?
Customer - 503 errors
Ben (support) - I am not getting any 503 errors on your site, is there a specific url to duplicate the error?
Customer - no, it comes and goes without any change Customer - could you have access to any logs ?
Ben (support) - Error logs are only available on Linux shared hosting, however with this error it may be related to you reaching your concurrent connections
Ben (support) - You can review more about this at the link \
Customer - probably yes - how can we troubleshoot ?
Ben (support) - http://support.godaddy.com/help/article/3206/how-many-visitors-can-view-my-site-at-once
Ben (support) - This is something you need to review your code and databases to make sure they are closing the connections in a timely manner
Customer - we're low traffic, this is an image DB to show our product details to our customers
Customer - ahhhh, so we could have straying sessions ?
Ben (support) - Correct Customer - any way you could check if it's the case ?
Customer - because it was working previously
Ben (support) - We already know that's the case as you stated the 503 errors don't happen all the time if it were issue on the server the the 503 would stay.
Customer - so our 2/3 max concurrent users can max out the 200 sessions
Customer - correct ?
Customer - is there a timeout ?
Ben (support) - no that's not a time out concurrent connections are a little different then sessions and or connections. Lets say for an example you have 5 images on your site and 5 7 users come to your site this is not 7 concurrent connections but 35. They
do close after awhile hence why the 503 error comes and goes. You can have these connections close sooner using code but this is something you have to research using your favorite search engine
Customer - thank you so much
Customer - I'm surprised that this just started a few weeks ago when we haven't changed anything for months
Customer - any changes from your side ? lowering of the value maybe ?
Customer - I'm trying to understand what I can report as a significant change
Ben (support) - We haven't touched that limit in years
Ben (support) - This could just be more users to your site than normal or even more images
Customer - I was thinking that could be it indeed
Customer - so I need to research how to quickly close connections when not needed
Ben (support) - Correctly
Ben (support) - correct
Customer - thanks !!
Ben (support) - Your welcome
Analysis :
The link provided tells us : All Plesk accounts are limited to 200 simultaneous visitors.
From what Ben (support) says and a little extra research, if those aren't visitors but connections then it's quite easy to max out, especially if the connections aren't closed when finished using. I'd suggest forwarding this to Kasem to see what he thinks.
Cheers,
Customer

Hi Md,
Thank you for posting in the MSDN forum.
>>
I want to writte C# code for 503 Service Unavailable error to web application page immediate close connection any page loaded.
Since
Visual Studio General Forum which discuss VS IDE issue, I am afraid that you post the issue in an incorrect forum.
To help you find the correct forum, would you mind letting us know more information about this issue? Which kind of web app you develop using C# language? Is it an ASP.NET Web Application?
If yes, I suggest you could post the issue directly on
ASP.NET forum, it would better support your issue.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Error "Unable to load word breaker for locale 0. Error code 8007007e." with search service application.

I recreate the Search service application and the default Content source stayning in the 'Recovering' status.
The log give multiple error 'Unable to load word breaker for locale 0. Error code 8007007e.'
The default language is English and the reference in registry for word breaker dll is naturallanguage1.dll but I found only the naturallanguage6.dll.

Hi,
For your issue, check your current language settings and ensure that search supports the current language.
On the SharePoint Server open Registry Editor (Start -> type “Regedit” and hit enter).
Point to : HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\OfficeServer\14.0\Search\Setup\ContentIndexCommon\LanguageResources\Default\English
Under the registry key for each of the languages there is a value called StemmerDLLPath and WBDLLPathOverride
Updated the registry entry with NATURA~1.dll to NATURA~2.dll
Point to Start -> Administrative Tools -> Services, right click on SharePoint Server Search 14 and click on Restart.
Performed a Full Crawl and wait for the Full Crawl to complete and try searching again.
For more detailed information, refer to the following blogs:
http://blog.ithinksharepoint.com/2008/04/20/a-word-breaker-was-not-found-for-the-given-language-error-when-crawling-content/
http://www.sharepoint2013.me/Blog/Post/175/Word-breakers-in-SharePoint-2013
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Error when crawling "Unable to load stemmer for locale 1033. Error code 80040111."

In the Sharepoint Search Service I get tose error "MAPI: Logon failed. " in the log and "Unable to load stemmer for locale 1033. Error code 80040111." in ULS.
The error code 80040111 is well a relation with Mapi but what about stemmer???

Hi,
For your issue, check your current language settings and ensure that search supports the current language.
On the SharePoint Server open Registry Editor (Start -> type “Regedit” and hit enter).
Point to : HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\OfficeServer\14.0\Search\Setup\ContentIndexCommon\LanguageResources\Default\English
Under the registry key for each of the languages there is a value called StemmerDLLPath and WBDLLPathOverride
Updated the registry entry with NATURA~1.dll to NATURA~2.dll
Point to Start -> Administrative Tools -> Services, right click on SharePoint Server Search 14 and click on Restart.
Performed a Full Crawl and wait for the Full Crawl to complete and try searching again.
For more detailed information, refer to the following blogs:
http://blog.ithinksharepoint.com/2008/04/20/a-word-breaker-was-not-found-for-the-given-language-error-when-crawling-content/
http://www.sharepoint2013.me/Blog/Post/175/Word-breakers-in-SharePoint-2013
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Java applet loading for a long time.

If you go here (warning - long load to start with) -
www.aclwebsite.co.uk
I have placed a newsticker java applet there but when you first visit the site the browser freezes up for a while untill the applet loads.
Any idea on whats causing this to load so much?
Thanks.

If you go here (warning - long load to start with) -
www.aclwebsite.co.uk
I have placed a newsticker java applet there but when
you first visit the site the browser freezes up for a
while untill the applet loads.
Any idea on whats causing this to load so much?
Thanks.A long-running init() or start() method of the applet. I guess you better do something about your own code then.

Installer LV7.1 - LabVIEW load error code 21: An external subroutine required for execution could not be found.

Bonjour,
Je cherche à créer un installer portatif utilisant les drivers NI-DAQmx 8.7.1 et NI-CAN 2.6.0.
Je dispose d'un code LV 7.1 et j'ai installé l'application builder 7.1.
Mais une fois l'application installé sur un PC vierge de Labview, j'obtiens le message suivant:
load error code 21: An external subroutine required for execution could not be found.
Ce message est répété plusieurs fois (pour différents VIs) puis le programme ne se lance pas.
J'ai bien veillé à installer les drivers NI-CAN et NI-DAQmx correspondant au préalable sur la machine cible.
En chercant sur le forum, plusieurs pistes m'ont été proposé:
La version NI-DAQ
L'intégration du Run time Engine
Un problème de DLL
J'ai vérifié ces 3 points mais cela n'a pas règlé mon problème.
Résolu !
Accéder à la solution.

Bonjour,
Merci de ta réponse.
En fait, j'ai bien inclu le runtime engine de Labview qui était effectivement la source de l'erreur.
L'installation de NI-DAQmx v 8.7.1 provoque la mise à jour de la version du runtime engine (passage de 7.1 à 7.1.1).
J'ai donc désinstallé Le runtime engine 7.1.1 (ce qui a provoqué la désinstallation de labview et NI-DAQ).
Puis je suis passé par une version plus ancienne de NI-DAQ (7.2) que j'ai adapté (inclusions de DLL et de VIs).
Les messages d'erreurs ont alors tout simplement disparus!

Power book not loading (error: unable to find driver for this platform) help me please

power book not loading (error: unable to find driver for this platform) help

That usually happens when trying to install Mac software intended for Intel-powered Macs (made in 2006 through present) on a PowerPC mac like teh powerbook (made before 2006).
You post is a little cryptic, however. We may be of further help if you can tell us:
<> the PowerBook's processor type (G3 or G4) and the Mac OS version, both available by doing "About the Mac" from your Apple menu.
<> what program and its version your were trying to run and/or install.

Application Loader error, how to submit app for approval

Firstly, here's my info:
1) App is for iPad and iPhone/iPod Touch
2) Build using Flash CS 5 (Windows), packaged using Air 2.6 using ADT.
3) Successfully build and tested my .ipa file.
4) I just got a Mac OSX (I'm new to Mac) for submitting to Apple for approval.
When I submit my app using the Application Loader:
Error is: "Application failed codesign verification. The signature was invalid, or it was not signed with an Apple submission cartificate"
(read that I need to rename my .ipa to .zip and submit that, but it still gave the error)
Forgive me if this has been answered before, but it's bits and pieces of tips all over.
And I don't understand why I need to manually hack files when Adobe claims Flash can develope apps for iOS.
- ok, yes Flash can develope iOS apps, but with that statement, don't we all presume we can also submit it to the App store?
I've spent months optimizing the app from PFI builds to now using AIR 2.6.
Bought all the devices to test on. Now that I'm ready to submit it to Apple, I'm hitting the wall again.
I've gone through lots of tips but none works for me.
Can someone give step by step instructions?
Thanks,
-alfred

Ok, it was sweet while it lasted
Apple sent an email:
"Invalid Signature - Make sure you have signed your application with a distribution certificate, not an ad hoc certificate or a development certificate. Verify that the code signing settings in Xcode are correct at the target level (which override any values at the project level). Additionally, make sure the bundle you are uploading was built using a Release target in Xcode, not a Simulator target. If you are certain your code signing settings are correct, choose "Clean All" in Xcode, delete the "build" directory in the Finder, and rebuild your release target."
I'm sure I used the Distribution certs.
Since I'm using Flash and not Xcode, what are the possible problems?
I used adt -package -target ipa-app-store ....
-alfred

Facebook games not loading, Error message was SSL peer rejected a handshake message for unacceptable content. (Error code: ssl_error_illegal_parameter_alert).

The facebook game not loading properly, it getting struck, when i refresh the page Error message was showing. The error message was
"Secure Connection Failed
An error occurred during a connection to imabigfanof.criminalcasegame.com. SSL peer rejected a handshake message for unacceptable content. (Error code: ssl_error_illegal_parameter_alert)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site. "
I had reset the firefox, but it doesn't fix my problem. I had checked same page in other browsers, like Google Chrome & Internet Explorer. I didnot get problem in that browser, The problem coming in firefox browser only.
Firefox is my best web browser, Please help me to fix this problem.
Waiting for ur kind reply...

Thank you for the advice, I do run Kaspersky and will disable it to see if this will work and report back so that if there is others that are experiencing the same problem can also bennefit from this advice

Keep receiving down load error try again later, when I try to download some previous music purchases for my new iphone

Keep receiving down load error try again later, when I try to download some previous music purchases for my new iphone

Hello JaseW,
The following article provides a number of steps which can help get your downloads moving again.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
Allen

Error Downloading Plugin for Swing Applet

Dear Fellows!
i am using following Java Script in HTML to download Java Plugin for Swing Applet.
<b>But</b>
During download and installation it gives the error that the file is corrupted try to download again...., I have checked it on more than one PC,s and platforms ....
Please guide if there is problem in script or in the available plugin...
Thanking you !!!!!
/////////////////////// HTML /////////////////
<html>
<head>
<title>Swing Applet</title>
</head>
<body BGCOLOR="#ffffff" LINK="#000099">


<SCRIPT LANGUAGE="JavaScript"></SCRIPT>
<COMMENT><SCRIPT LANGUAGE="JavaScript1.1"></SCRIPT></COMMENT>
<SCRIPT LANGUAGE="JavaScript"></SCRIPT>
<APPLET CODE = "Client.class" CODEBASE = "./Chat" ARCHIVE = "*.class" WIDTH=600 HEIGHT=500 ></XMP>
<PARAM NAME = CODE VALUE = "Client.class" >
<PARAM NAME = CODEBASE VALUE = "./Chat" >
<PARAM NAME = ARCHIVE VALUE = "Client.class" >
<PARAM NAME="type" VALUE="application/x-java-applet;version=1.1.2">
</APPLET>
</NOEMBED></EMBED></OBJECT>
</body>
</html>

I remeber there is an example in Sun java toturial,
you may find the answer from there.
peter
JawaBeginer (A powerful JavaIDE tool for Java Programmer, exp: beginer)
http://www.pivotonic.com

Two load errors for a standard SRM Contract ODS

We've just installed standard business content for SRM Contract ODS. The standard InfoSource we installed is 0BBP_TD_CONTR_1.   Two loading errors occur:
1st error:
No return value <> 0 allowed in update routines in transfer mode
Diagnosis
The return code was set to <> 0 in routine 'r0063_0SR_TARGVDC ', but the corresponding data field is updated with MOVE. You therefore can not prevent the update of a single data field for certain key values.
System Response
The load process is terminated.
Procedure
When you update with MOVE, you do not have to update all the data records. In this case you should use a start routine in the update rules in which you delete the data records that you do not want to update from    table DATA_PACKAGE. Set the return code for all routines affecting a data field that is updated with MOVE to 0 (also the corresponding key field routines).
Procedure for System Administration
2nd error:
Error converting currency to standard currency (see long text!)     RSBCTBBP
Diagnosis
Record number 1 : Error during currency conversion to standard currency.
The currency JPY of field 0OUTAGTARGT could not be determined.
Procedure
    Possible causes are listed below:
    - Could not find currency tables RSCURTRT or TCURR
    - Could not determine conversion date
    - Could not find an exchange rate for currency JPY in table TCURR
    Check the erroneous data record, currency unit, and date.If all data is
    available, check whether the standard currency was created correctly.
You can change it in transaction <rscur> by changing the settings for InfoObject 0SR_DEFCUR.
Furthermore, the global settings must be transferred from the source system in order to get the currency keys of the currencies (maintained for currency JPY in table TCURR). Use transaction <rsa1> to transfer the global settings. Select 'Source Systems' and choose the entry 'Transfer Global Settings' for the respective source system.
Note: we've transfer the global settings at currency from our SRM source system already, but we still get the same error msgs.
Any idea/solution?
Thanks

Hello All,
As I have already mentioned the condition types in SRM are identically matched to ERP condition type hence the data is flowing correctly and even the idoc has the z-condition type Z123.The IDOC in backend ERP has status 53.
On trial and error method we did unchecked the manual indicator check in the pricing schema for the relevant condition type and because of that now the Z-condiiton type can be seen in the backend ERP contract.
If the indicator was checked, this means that this condition can be maintained only manually (directly in the transaction
ME32K in ECC) and nothing can be transfer from other source.
Note: If the same condition type is being used in more than one pricing procedure then ensure that the check bok is unchecked for agianst the relevant condition type.
Thanks,
Yatin

Applet loading Failed .... for diagnostics-console-extension.jar

Hi everybody,
i downloaded diagnostics-console-extension.jar from bea site. i copied this file to D:\bea9.0\user_projects\domains\mydomain\console-ext. i started weblogic server . in administration console when i clicking WLDF console extension tab it gives the Applet loading failed....and also in server console it gives an exaception as follows ""
java.lang.ClassNotFoundException: jsp_servlet._com._bea._diagnostics._dashboard.
__chartpanelapplet_class.
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubI
mpl.java:512)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:224)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(Servlet
StubImpl.java:383)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:298)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:165)
Truncated. see log file for complete stacktrace
>
in Java console output Exception
Java Plug-in 1.5.0_06
Using JRE version 1.5.0_06 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\mselvan
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
java.lang.ClassFormatError: Truncated class file
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(Unknown Source)
     at java.security.SecureClassLoader.defineClass(Unknown Source)
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception in thread "Thread-5" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception in thread "thread applet-com.bea.diagnostics.dashboard.ChartPanelApplet.class" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
so kindly any one help for the same.please help me
Thanks & regards
Selvan.M

Several issues with the diagnostic console extension have been fixed in WLS 9.2. Can you try the extension from 9.2? WLS 9.2 is now ready for download from the BEA site.
Thanks

Strange (for me) applet loading error.

Similar Messages

Maybe you are looking for