Strange image-cacheing in Internet-Explorer with Java1.5-Applet

I have written a Java-Applet for showing image-slideshows.
In short words, the applet loads an image, scales it to screen-size,
and loads the next image when one clicks on the applet.
The applet causes a problem in MS Internet Explorer. The memory allocated by an image is never freed. After about 30-40 images, more tham 100MB are allocated by the JVM and the JVW crashes throwing an OutOfMemoryError.
The same Applet runs fine on Netscape and Mozilla. Here, the memory allocated is always between 8 and 25 MB, even after sliding through hundreds of images.
Some more coordinates:
The applet is written in Java1.5 source code. My test-system is a P4 with Windows XP SP2. I have tried out Sun's JVM 1.5.0_03 and BEA's JVM JRockit 1.5.0_02 as browser-plugins, both cause the same problem in MS-IE6.
I have tried to replace Applet.getImage() by com.sun.image.codec.jpeg.JPEGCodec.decodeAsBufferedImage() - same results.
I have tried to flush any loaded images explicitely in the Applet.stop()-method, but no effort.
The images are definitely not stored in some static containers inside my applet. The problem occurs on the level of the JVM/browser-constellation.
Now my question: Is there any trick to affect the cacheing-mechanisms of the JVM? Image.flush() does not solve the problem.
Is this a Java1.5 bug? Or a MS-IE bug?
Is there anything that I did not consider?
Thanks in advance

Similar Messages

Image Justification for Internet Explorer

I am trying to justify the images altrnately right and then left at http://www.theforrestproject.org/xcertification.html It looks fine in Google Chrome but looks awful in Internet Explorer with large gaps in the text. I would appreciate assistance to resolve this issue, please. I am using Dreamweaver CS3.
Ian Malik

I am viewing it in Explorer9 and I am trying to get all the text to wrap around the images....
OK I can't check in IE9 now because I am working on Windows XP. However, you may want to correct one of styles shown as follows:
.style47 { font-size: 24;
font-family: "Old English Text MT";
After 24 you should put px so that it looks like this:
.style47 { font-size: 24px;
font-family: "Old English Text MT";
hth

I just replaced Internet Explorer with Firefox. I usa Outlook for my email. When I try to go to a link from an email a long thin message appears which says in part: "error occurred sending command to application"

I just replaced Internet Explorer with Firefox. I usa Outlook for my email. When I try to go to a link from an email a long thin message appears which says in part: "error occurred sending command to application"

Try:
*http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

I get an "unable to connect" message yet I can connect and use Internet Explorer with no problem. I tried updating to Firefox4 and still get the same message. What do I do?

I get an "unable to connect" message yet I can connect and use Internet Explorer with no problem. I tried updating to Firefox4 and still get the same message. What do I do?

JungleTaxi Cabbie wrote:
Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
Enter your Incoming Mail Server, User Name, and Password using the following settings:
Incoming Mail Server: mail.me.com
User Name: Your iCloud email address (excluding @me.com)
Password: Your password
Last Modified: Jun 27, 2013
Maybe you should test these things before calling people out, because these settings do function perfectly well.
iCloud is not supported on Snow Leopard or lower, why bother to mention it?
The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
JungleTaxi Cabbie wrote:
Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
I never said that there was, perhaps you imagined it.

Images load in internet explorer, not in firefox, why is this?

The website i am working in is www.pestcontrolprofessional.com. On the upper lefthand corner is the company's logo. This loads fine in internet explorer, but i cant get it to load on firefox. On the "AboutUs" page i also can't get the image to load in FF. I checked the html to see why and i just can't come up with an answers. I am sure it's an obvious answer. I've seen similar questions on this site but i can't find one that apply's to this particular issue. Any help is appreciated.

No problem here with that logo.
Can you open that logo directly in a tab?
*http://www.pestcontrolprofessional<i></i>.com/logo2.jpg
If you use extensions (Tools > Add-ons > Extensions) like <i>Adblock Plus</i> or <i>NoScript</i> or <i>Flash Block</i> that can block content then make sure that such extensions aren't blocking content.
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (MAC)
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show

How to print multiple pages using Internet Explorer with af:showPrintablePageBehavior

Hello,
I am facing one issue with using af:showPrintablePageBehavior. I found similar posts and google pages, but unable to fix the issue. Most relevant post is,
Print issues with af:showPrintablePageBehavior and Internet Explorer
I have a page show in a af:popup. This page contain a Title in the top, af:outputText and a Print button below it. I have added af:showPrintablePageBehavior to Print button. I am using lots of data in the af:outputText. When I click on Print button, showPrintablePageBehavior is opening new browser window with multiple pages. But when I click on the Print Preview or Print, only first page is shown.
I have tried the solution mentioned in above post but no luck.
    <f:verbatim>
        <style type="text/css">
            textarea {
                width: 95%;
                height: 350px;
                overflow: auto;
            @agent ie {
                af|document:maximized::printable {
                    position: static;
        </style>
</f:verbatim>
<af:panelStretchLayout bottomHeight="10%" startWidth="0%" endWidth="0%" topHeight="10%" inlineStyle="height: 100%; width: 100%">
<f:facet name="top">
<af:panelGroupLayout id="pnlGrpTitle" layout="vertical" halign="center" inlineStyle="width: 100%;">
<af:spacer id="titleSpacer" height="10px" />
<af:label value="Title" inlineStyle="font-weight:bold; font-size: 16px; color:#000066; padding-left: 5px" id="dialogTitle" />
<af:spacer id="titleSpacer2" height="20px" />
</af:panelGroupLayout>
</f:facet>
<f:facet name="center">
<af:panelStretchLayout bottomHeight="0" topHeight="0" startWidth="0" endWidth="0">
<f:facet name="center">
<af:panelStretchLayout bottomHeight="0" topHeight="25" startWidth="0" endWidth="0">
<f:facet name="center">
<af:panelGroupLayout id="pnlTextArea" layout="scroll">
<af:outputText binding="#{mybean.tfdArea}" escape="false" id="tfdArea" />
</af:panelGroupLayout>
</f:facet>
</af:panelStretchLayout>
</f:facet>
</af:panelStretchLayout>
</f:facet>
<f:facet name="bottom">
<af:panelGroupLayout id="pnlGrpBottom" layout="vertical" halign="center" inlineStyle="width: 100%">
<af:commandToolbarButton id="cbPrint" shortDesc="Print" icon="/images/print.png" inlineStyle="width: 40%" >

<af:showPrintablePageBehavior />
</af:commandToolbarButton>
</af:panelGroupLayout>
</f:facet>
</af:panelStretchLayout>
Any idea how to fix it?
- Sujay

Hello,
I am facing one issue with using af:showPrintablePageBehavior. I found similar posts and google pages, but unable to fix the issue. Most relevant post is,
Print issues with af:showPrintablePageBehavior and Internet Explorer
I have a page show in a af:popup. This page contain a Title in the top, af:outputText and a Print button below it. I have added af:showPrintablePageBehavior to Print button. I am using lots of data in the af:outputText. When I click on Print button, showPrintablePageBehavior is opening new browser window with multiple pages. But when I click on the Print Preview or Print, only first page is shown.
I have tried the solution mentioned in above post but no luck.
    <f:verbatim>
        <style type="text/css">
            textarea {
                width: 95%;
                height: 350px;
                overflow: auto;
            @agent ie {
                af|document:maximized::printable {
                    position: static;
        </style>
</f:verbatim>
<af:panelStretchLayout bottomHeight="10%" startWidth="0%" endWidth="0%" topHeight="10%" inlineStyle="height: 100%; width: 100%">
<f:facet name="top">
<af:panelGroupLayout id="pnlGrpTitle" layout="vertical" halign="center" inlineStyle="width: 100%;">
<af:spacer id="titleSpacer" height="10px" />
<af:label value="Title" inlineStyle="font-weight:bold; font-size: 16px; color:#000066; padding-left: 5px" id="dialogTitle" />
<af:spacer id="titleSpacer2" height="20px" />
</af:panelGroupLayout>
</f:facet>
<f:facet name="center">
<af:panelStretchLayout bottomHeight="0" topHeight="0" startWidth="0" endWidth="0">
<f:facet name="center">
<af:panelStretchLayout bottomHeight="0" topHeight="25" startWidth="0" endWidth="0">
<f:facet name="center">
<af:panelGroupLayout id="pnlTextArea" layout="scroll">
<af:outputText binding="#{mybean.tfdArea}" escape="false" id="tfdArea" />
</af:panelGroupLayout>
</f:facet>
</af:panelStretchLayout>
</f:facet>
</af:panelStretchLayout>
</f:facet>
<f:facet name="bottom">
<af:panelGroupLayout id="pnlGrpBottom" layout="vertical" halign="center" inlineStyle="width: 100%">
<af:commandToolbarButton id="cbPrint" shortDesc="Print" icon="/images/print.png" inlineStyle="width: 40%" >

<af:showPrintablePageBehavior />
</af:commandToolbarButton>
</af:panelGroupLayout>
</f:facet>
</af:panelStretchLayout>
Any idea how to fix it?
- Sujay

Animated gifs appear to have image bleedthrough in Internet Explorer 9

I have been using Photoshop on a Mac for several years to make animated gif files for our company website and for our customers as well and have never had a problem until recently. On some Windows computers, these files are now appearing with ghost images bleeding through from one frame to another. I have made sure that all layers that are not needed in a particular frame are turned off and I have tried various ways of saving the gif out of Photoshop but have had no luck. I did discover if I turned the option for transparency off in the Save for Web and Devices box the image bleed issue would go away, but then white lines appeared in my gifs instead. After doing some research it appears the image bleed problem is happening in the Internet Explorer 9 browser, but does not happen in any other browser I have tested - Safari, Firefox on Mac and Firefox on Windows. Has anyone run across this issue and found any way to resolve it? It's hard to explain to my customers that their files are fine when what they see on their screens is not. Thanks!

Joel,
You are doing nothing wrong and it is not a Photoshop issue, but a Microsoft one from what I understand after researching this earlier this year. If you were to check you would NOT have this problem in Firefox on a Windows computer, only IE. I believe it started with version 8, but can't swear to that, but I know for sure it was in IE 9. At any rate the way to "fix" it is to change the Compatibility View Mode in IE. Depending on how this view is set you may see any number of issues including the lines that you descrbe. I've included a screen shot showing where to change this. (The small icon next to the address bar.) On my computer when the icon is blue it displays incorrectly, when it is gray things look as they should. Or you can use Firefox and avoid the problem all together. We even had issues where it made our web content reflow around the graphics incorrectly if we didn't have this set correctly. What's bad about it is that it's hard to explain to your customer why their stuff looks wrong and Microsoft has known about this issue for quite a while and hasn't fixed it.
Glad you posted on here so I could post back a fix. I usually do when I find a solution, but it took us several months to come up with what was happening and I'd forgotten to post back.

Increase still image cache when working only with images?

I've been having hundreds of out of memory issues when working on a still image project. Thought it was solved but it hasnt.
If im working totally with still images (Jpegs, Tiffs and PSD's) should I increase the Still Image cache from its default amount? I have scoured the internet trying to find out what the Still Image Cache is but cant find an explanation anywhere.
I increased it this morning and all is well so far.....
Might this solve my problem.

The Still image cache is the amount of RAM assigned to the playback of the stills. That's what that slider adds... it should help to make it larger when you are working with a lot of stills. They are cached to RAM instead of being read from disk...
From the manual:
Still Cache: This specifies the amount of RAM used to hold still images for real-time playback. The still cache that is allocated is a percentage of the excess RAM allocated to Final Cut Pro, so adjusting the Application slider also adjusts the amount of RAM available to the still cache. The more RAM allocated to the still cache, the more still frames can be played back in real time in the currently selected sequence. If another sequence is opened, the contents of the still cache are replaced with stills from the new sequence. If there is no excess RAM available, this slider is dimmed.
Jerry

How do I stop Firefox from updating Internet Explorer with my bookmarks?

I upgraded Mozilla Firefox recently and must have agreed to merge bookmarks. All my bookmarks now appear in Internet Explorer also. Any changes affect explorer. I can't figure out how to stop. I can disable on the explorer end but not Firefox.

I do not fully understand what you are trying to explain.
Firefox certainly does not ordinarily update or change your IE favourites.
(You are able to export Firefox bookmarks in a suitable {HTML} format though)
Firefox bookmarks are not the same as IE's favourites. You are able to import the HTML favourites from IE. Firefox then converts these to the required Firefox formats and keeps the bookmarks to itself.
Unless possibly you have some utility that exports the Firefox bookmarks and over writes the IE files ?
Or maybe you are just reading HTML files and folders with Firefox instead of using Firefox bookmarks.
Have a quick read of these articles and post bask with more information about what is happening.
See
* [[How to use bookmarks to save and organize your favorite websites]]
* [[Use bookmark folders to organize your bookmarks]]
* [[Import Internet Explorer Favorites from another computer]]
*[[Import Bookmarks from Internet Explorer]]
* [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]

How to stop the information bar cmoing in the Internet Explorer with java

hai all,
iam new to this forum and posting a question on java application where i had a problem.
I work in a software company. we have developed an application and it is in production and we had a small problem. we have deifferent kinds of reports te users can get dynamicalty based on theirn requet parameters. so when we are deployingthe application on server and accessing it from the client machine(bothe the server and client are diferent i mean different machines) they get an information bar that
"To help protect your security, Internet Explorer blocked this site from downloading files to your computer. Click here for options". and for this we have given them the solutions for setting the security features for the
Internet Explorer . but they want it to be done thru program such that they dont want to see that message. i need a small help for this.
It would be very help ful for me in my carreer if i get a solution for this.

I'm not 100% sure, but doesn't all applets have the same popup bar? I guess you can tell your customers to turn off their popup blocker beforehand. (This is what my uni does with WebCT Vista)

Search hover panel not showing up in Internet Explorer with custom master page

The hover panel is not showing up in internet explorer. I am using a custom master page and it works no problem in the other browsers. When I fire up the debugger there is an error message when i hover over a search result item:
I tried debugging the JavaScript but i am not sure what is going on with it.
Am I missing reference or something done like that? It has to be something simple because I have been scratching my head for a while on this.
Any ideas?
Brad Wight

Have you tried rendering the site in IE Compatability Mode? Compatability Mode solves a lot of problems in this area because older versions of IE had a unique interpretation of HTML code.
Start here:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-8
I trust that answers your question...
Thanks
C
|
RSS |
http://crayveon.com/blog |
SharePoint Scripts | Twitter |
Google+ | LinkedIn |
Facebook | Quix Utilities for SharePoint

Problems in IE -internet explorer- with Adobe web fonts embedded in EDGE compositions

Hi again friends,
For simplifying the problem: Im trying to create compositions, just some animated texts over video, using adobe web fonts in Edge. In this case using muse to insert them.
Everything works fine, but after uploading the result compositions, they always work fine in Chrome or Mozilla, but they dont work always fine in Explorer (tested in diferent versions and OSs).
Frustratingly, sometimes IE display the fonts correctly, some other times changes the font to arial or similar...
Frustrating example: Two instances of the same composition (only text moving over mp4 video) and sometimes one work fine and the other is changed to arial, some other times both ok, some other both arial.... its crazy.. just refresh, and it changes!!
If I create a page with only one composition (text over video) it works fine 90-95% of the times in IE. just refreshing... and after some good attempts.. the arial font apperar smiling to me!!!!!
Any suggestion?
What can I do?
Checked with diferent systems using latest versions of Edge and Muse in my job, only in Windows systems.
Sorry for my english, I hope is well explained...

Hi,
I have prepared for you a basic composition where the problem ALWAYS appear:
The page uses 2 compositions created in edge, inserted in a Muse project via .oam file (note that publishing directly to web structure, the problems occurs too)
1.- The upper element of the page is one composition with only ANIMATED TEXTS over a simple MP4 VIDEO BACKGROUND. The used font is -Fredoka One-
This first composition is inserted in the Muse Master page
In the Muse index main page are the other 2 elements:
2.- Above the first composition there is another Edge composition, that contains 4 video backgrounds with a title over each one. The font of each main title is -Fredoka One- too.
3.-In the bottom there is inserted THE SAME composition than in the upper side of the page.
Yuo can see it in http://www.comunicracia.es/
As you can see, everything is OK using Chrome or Mozilla, BUT PLEASE TAKE A LOOK USING INTERNET EXPLORER.
Using IE I can see every combination of problems with the font, BUT never the 3 elements Fine!!! (The tittles font is replaced by Arial frustratingly without any rule)
(My experience FYI) In this composition I have prepared for you, the bottom composition is usually (90%times) OK, the upper composition is usually (95%times) BAD, and the middle composition usually (70%times) BAD.
If I publish only the first composition in the page, it works fine in IE 95% of the times.
Pleeease, its frustrating..
Any suggestion?
What can I do??
Thank you very very much in advance, my friends!
All the best

The firefox page constantly says "Connecting" and will not load any websites. I've also updated the firefox software via internet explorer with the same reslults can you help?

Internet explorer works perfectly and firefox will not load any websites

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Firefox shows much larger images than in Internet Explorer

When I open a site like (BankofAmerica) in Internet Explorer the The site opens in the size I am use too!. If I do the same in FireFox site shows too large to work with it. I have had the problem for several months. So I have had to switch to Internet Explorer.
Any suggestions?
Gus Evans

Try "Ctrl+0" (zero) to reset the zoom, Firefox remembers zoom level per site.

PROBLEM IN INTERNET EXPLORER WITH THE fileupload API

i written a servlet to upload a file which will upload a file to a specific directory..............
this program is working with opera or Mozilla browser.......but it is not working in internet explorer 8.
i can not understand what is the problem..............
code working with opera or Mozilla and also for other browser but not with explorer 8..
my code is
index.jsp is a welcome file which is used to select a file which i want to upload
index.jsp
<html>
<head><title>Upload page</title></head></p> <p><body>
<form action="uploadFile" method="post" enctype="multipart/form-data" name="form1" id="form1">
<center>
<table border="2">
<tr>
     <td align="center"><b>Multipale file Uploade</td>
     </tr>
<tr>
     <td>
          Specify file: <input name="file" type="file" id="file">
     <td>     </tr>
     <tr>
     <td>
<div align="center">
<input type="submit" name="Submit" value="Submit files"/>
</div></td>
</table>
     <center>
<p>
     </p>
</form>
</body>
</html>
uploadFile.java is servlet file which is used to upload the file in the specific location....
the code of uploadFile.java is
uploadFile.java
import java.io.IOException;
import java.util.Iterator;
import java.lang.Object;
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.List;
import java.io.*;
import java.io.File;
import org.apache.commons.fileupload.servlet.ServletFileUpload;
import org.apache.commons.fileupload.disk.DiskFileItemFactory ;
import org.apache.commons.fileupload.*;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class uploadFile extends HttpServlet
public void doPost(HttpServletRequest request,HttpServletResponse response)
throws IOException,ServletException {
HttpSession session=request.getSession();
PrintWriter out=response.getWriter();
ServletConfig config=getServletConfig();
boolean isMultipart = ServletFileUpload.isMultipartContent(request);
if(!isMultipart)
else
     FileItemFactory factory = new DiskFileItemFactory();
     ServletFileUpload upload = new ServletFileUpload(factory);
     List items = null;
     try {
          items = upload.parseRequest(request);
     } catch (FileUploadException e) {
          e.printStackTrace();
     Iterator itr = items.iterator();
     while (itr.hasNext()) {
     FileItem item = (FileItem) itr.next();
     if (item.isFormField()) {
     } else {
          try {
               String itemName = item.getName();
               if(itemName.equals(""))
               session.setAttribute("itemName",itemName);
               response.sendRedirect("index.jsp");
               File savedFile = new File(config.getServletContext().getRealPath("/")+"uploadedFiles/"+itemName);
               item.write(savedFile);
               out.println("Your file has been saved at the loaction:"+"\n"+config.getServletContext().getRealPath("/")+"uploadedFiles"+"\\"+itemName);
          } catch (Exception e) {
               e.printStackTrace();
Now i want to solve my problem in my code...............
pleasde help me.............

First of all, please do not shout in topic titles. It is rude.
Secondly, please buy a new keyboard. Your dot key hangs all the time, it reads annoying.
Back to your problem: did you read the FAQ available at the [FileUpload homepage|http://commons.apache.org/fileupload]? There´s something stated about a misbehaviour in IE and how to fix it using Commons IO. It is namely sending the complete client´s file path instead of only the file name.

Strange image-cacheing in Internet-Explorer with Java1.5-Applet

Similar Messages

Maybe you are looking for