Strange MC duplication in FLash CS3

I created a movieclip in flash cs3 and then i duplicated same
movieclip in library using the duplicate command and exported for
actionscript and then applied few transformations like made larger
than original. Now if i test my flash file the original movieclip's
instances are also larged like the duplicated movieclip.
Is it a bug? if not then what is the logic.
Note: the original movieclip is not exported for
actionscript.

Hi Jostrom,
Thanks for reporting this. We were able to narrow down this issue and has already been logged internally under bug #3585950.
We shall update once this is investigated and gets fixed.
Regards,
Nipun

Similar Messages

Flash CS3 Strange IDE Problem

Hi --
I am having a totally bizarre issue with the Flash CS3 IDE in
that my
"Output" window is always blank. This just started happening
to me today. I
have tried creating a new Flash movie and putting in a single
line of
Actionscript:
trace("Hi")
When I run the movie the Output window pops up but its blank.
Any ideas?
Thanks
Rich

Hi --
It was the "filter level" setting. I changed it from "none"
to "verbose" and
all is good. I never even knew that setting existed so I have
no idea how I
changed it! Thank you so much.
Rich
"Noelbaland" <[email protected]> wrote in
message
news:g8t2nd$4nh$[email protected]..
> Try this. Open your Output window and go to the options
menu in the top
> right
> corner. In the menu go down to Filter Level and just
check that None is
> not
> checked. If nothing is checked then choose Verbose
>
> Another thing you can check is in the Publish Settings
under the Flash
> tab.
> See if the Omit trace actions has been checked - uncheck
it if it has.
>
> Hope that helps!
>

Quicktime movie export from Flash CS3 is skipping frame.

When I try to export Quicktime movie from Flash CS3, the
resulting mov file is skipping frames. i.e.: The movie is showing
frame number 1, 2, 3, 4, 5, 6, 7, 7, 7, 10, 11, 12, 12, 12, 15
etc...
As you can see the frame number 7 is repeated 3 times and
frame 8 and 9 are nowhere to be found.
The last configuration I used is 960x540, Sorenson video 3
medium quality, 25 fps, keyframe every 25 frames. 6400 kbits/s.
I tried various configurations,with different codecs and even
with keyframe all frames and I always get simillar problems.
Anyone have an idea what is going on, and how to fix this?
Thank you,
Olivier.

The QT exporter in Flash is honestly my least favorite
feature - not the feature itself but how it
works (or how it doesn't work in some cases). For me it is
almost unusable unless you have a very
short timeline, small stage, lower frame rate - like AS
generated effects or something - otherwise,
for true frame accuracy to video output - it is not reliable
enough and not fast enough for any real
world production environment.
So typically for me - I love SWF2Video (www.flashants.com) as
it takes any SWF and makes it into an
AVI that is frame accurate no matter what the frame rate is -
quite incredible - enough so that I
always felt it should have been bundled with Flash (as well
as Wacom tablets).
Harmony is an incredible product - as is SOLO and TBS (Toon
Boom mStudio) - each of those programs
are dedicated animation programs designed for output to video
- Flash has a lot of hats to fill and
it was never really designed for animation to video even
though many of us have found it suitable
for all intents and purposes as an animation program for full
production.
But all in all - the quicktime exporter doesn't really
deliver how we would expect it too I am sorry
to say - I only hope it works as well as it does on the Mac
(Mac users could always choose to export
to Quicktime Video but not PC users).
For now if I am exporting to video I keep it all on the
timeline or nested in Graphic symbols or use
the SWF2Video tool.
hope this helps.
-chris
Chris Georgenes / mudbubble.com / keyframer.com / Adobe
Community Expert
OBastien wrote:
> Thank you for your reply Chris.
>
> I tried different possible solutions you listed but it's
not working.
> Disabling sound had no effects. Changing the FPS is not
an option, it has to be
> 25 FPS. I lowered the resolution to 300 something, it
seemed to be a little bit
> better, but it still dropped some frame, and the image
quality was horrible.
>
> I think it is really sad that we have to try different
settings in the hope
> that flash will grab all the frames. I'm really
disapointed in Adobe. I'm
> pretty sure it is the fault of Adobe and not Apple,
because I don't have does
> problems with Quicktime in ToonBoom Harmony. What is
strange is when I do an
> AVI export I never noticed a dropped frame. I'm not
using AVI video right now
> because I can not find a codec that gives me small size,
fast encoding times,
> the ability to seek in the movie by dragging the
timeline progress bar, and the
> possibility to edit in After Effects. If you know an AVI
codec that does all
> that it would be really great news.
>
> Thank you again,
> Olivier.
>

Flash CS3 fl.* package cannot be used in Flex Builder 3

Hi,
I was very disappointed to find out that one cannot import
the fl.* package, which is available for flash CS3. I found a work
around by creating swc file and importing them, however it's
disappointing that flash CS3 would have such a major advantage over
Flex Builder 3 when building an Action Script 3.0 Application.
Best, E

I've looked over that sample.
Part of the problem is that I don't have access to
mx.effects. I think this is because that example is a Flex 3
Project and has a MXML file attributed to it. I opened a Flex 3
project and was able to access mx.effects - but my project is
different in that it's an ActionScript project - meaning, I opened
an ActionScript project in Flex Builder 3. Apperantly the
ActionScript projects don't have access to mx.effects.Tween. And
niether do they have access to fl.transitions.Tween. It's strange -
and I'm trying to find a way to access them by connecting the build
path to the Tween classes somehow.
My project preferences already have the fl.* folders in the
build path. It just still doesn't seem to work.

Flash CS3 Remoting

Hi to all,
I have some questions about actionscript 3 in flash cs3.
I'm a developer and I develop application and website in c#,
flex, and flash.
Currently I would like to port some complex website to flash
cs3.
Why in actionscript flash cs3 there isn't a recordset class
or arrayCollection class ?
Another issue is that if i use Flash cs3 to manage old flash
project that use for example the recordset classes , this classes
are not present in the default package.
Another strange think for example is that the package fl.data
is not present for default , why I need to specify is in the global
classpath.
I try this very strange so I hope that someone can explain to
me this issue.
Bye

We're working on a TechNote covering this, expected next
week.
The Remoting Component and the Remoting classes are no longer
used with ActionScript 3. Rather you'd use the
flash.net.Netconnection class.
For AMFPHP users there's a third-party example here:
http://www.oscartrelles.com/archives/as3_flash_remoting_example
If you want to migrate content to an AS3 SWF you'll have to
update.
More info on this will be posted next week.

Help: symbol shifting between mac and windows, flash cs3

I'm doing work reviewing flash files created by other users
on mac and windows. I'm using os x 10.5.6. When I open a file
created in windows / flash cs3 some symbols on the stage will have
shifted upwards on the y axis. If I correct the shift and then send
it back to the windows user they see the symbols incorrectly
aligned, as if I had moved symbols around on a correctly aligned
file.
The strange thing is not everything on the stage is shifted.
Only particular symbols will move, and it's usually symbols only
(not text frames, drawing objects, etc).
I believe there's a general history of bad behavior when
saving flash files and trading them back and forth between mac and
windows, but does anyone know what may be causing this? Or a
remedy?
Thank you in advance.
Peter

also, I tried opening the same files in vista using a mac
mini with vista installed on a bootcamp partition. When opening
other windows authored flash files there I had shifting issues as
well, so I'm not convinced it's strictly a mac vs. windows issue.
Unless it's a flash cs3 on windows xp doesn't like mac flash cs3
and vista flash cs3...

Has Actionscript 3 changed since Flash CS3?

maybe it is a strange question?
I find that sometimes opening a Flash CS3 or Flash CS4 file in Flash CS5 causes the scripts to either fail or I get some strange results.
I do not have specific examples to mention as it does happen on occasions.
At the moment, I am doing a project for a University.
They only run Flash CS3 Flash Player 9, which already leads to issues.
I use Flash CS5 currently.
The first time I sent in a draft example, they could not open the file and also they could not play the SWF file, as they only run Flash Player 9. They will not update the Flash Player to 10 as it will affect other ongoing projects in the University.
I only purchase Master Suites, so I had to reinstall Flash CS4 from the CS4 Master Suite and also Flash CS3 from the Web Premium Suite.
The Flash CS5 file had to be saved out as Flash CS4. I then had to open the Flash CS4 file and save it for Flash CS3.
I found on occasions that opening the file in Flash CS3 cause some placement issues of Text and soemtimes, but not always some Actionscript 3 code would cause some errors.
Has Flash CS5.5 rectified this and added the option to save to Flash CS3 perhaps, this would solve alot of issues.
Has Actionscript 3 changed since Flash CS3?

Actionscript 3 has changed since CS3, though what existed in CS3 has not changed. Newer versions have newer features, so new code was created to support those features.

Flash CS3 Professional crashing on exit

Hi to all,
I have a strange problem. Every time I use Flash CS3, the
program works with no problem, with no lags and crashes. But once
my work is done and I close it, Windows prompts a dialog about a
"Flash not responding" warning. It happens every time I close the
program, why is that?
My laptop has 2 Gigs of Ram, Vista Home Premium.
Thanks in advance...

I do not recommend you to use CS3. And Vista. Too big, heavy
and slow. If it was not a program but something else, you'd run
like hell, right?

Sending Captivate 3 projects to Flash CS3

I am have a consistant problem with the background slide
layer being sized when I export a Captivate 3 project to Flash CS3.
I have tried several different projects and they all react the
same. The Layer for the slide background resizes to about 1/2 of
the orginial size but the overal (screen) project size stays the
same with all other components remaining at the correct position.
I encounter the same problem when I import a Captivate 3 file
to the stage in Flash CS3 as well.
Everything else is as it should be but the graphic is
resized.
Does anyone have any ideas?

> i'm not an expert Flash user and I can't solve a strange
problem. I hope
> in
> some useful suggestions : ).
>
> I exported several projects originally made with
Captivate 2 and re-saved
> with
> Captivate 3 to Flash CS3.
> After the export, the background slides size is
drastically reduced while
> the
> overall project size doesn't change (see also
>
http://groups.google.it/group/macromedia.flash/browse_thread/thread/840313a46eeb
>
18ca/f9a0f586a44c8376?hl=it&lnk=gst&q=export+Captivate+CS3+#f9a0f586a44c8376).
>
> I don't know what to do : ). Have you some ideas to fix
the problem?
>
Yeah this was asked and answered a couple of times recently
- The slide backgrounds are all held on one layer in Flash.
Looks to
consistently be layer 2, named Slide Backgrounds :-)
- This layer is locked. So click on the little padlock and
unlock the layer.
- Select "Onion Skin" and "Edit Multiple Frames"
- Two little 'start onion skin" and "end onion skin"
indicators appear at
the top of the timeline - move them to the start and end of
the timeline, so
they encompass the whole project.
- Select the Slide Backgrounds layer so that all of the Slide
Background
images are selected at once. You may need to also click on
the background.
- If you get it right. You'll see size and location values
for the
background in the Properties panel.
- Type in the correct slide background size, and position
0,0.
I sent in a draft technote to Adobe about this last week, so
hopefully it
will show up on Adobe.com sometime soon.
Steve
Adobe Community Expert: eLearning, Mobile and Devices
European eLearning Summit - EeLS
Adobe-sponsored eLearning conference.
http://www.elearningsummit.eu

How do I use a Flex swc in Flash CS3?

My engineering team has used Flex to create a nice little swc
for me to use inside of Flash CS3, but now I'm having trouble
finding any documentation on how to actually import it. Placing it
in the Components folder doesn't work, as it's not recognized by
the Components window (either as an AS2 or AS3 swc). Is it even
possible to use swcs from Flex in Flash? Thank you very much for
the help.
-- Jeremy

Use these links
Modular Applications
http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf69084-7f22.html
Creating Flex Libraries
http://help.adobe.com/en_US/Flex/4.0/UsingFlashBuilder/WS6f97d7caa66ef6eb1e63e3d11b6c4d0d2 1-7fe6.html
-Pramod
http://www.flexmycode.com

Problem with FLVPlayer in Flash CS3 (need to save out as Actionscript 3.0 SWf file)

I am using Flash CS3 and am trying to publish a SWf file that
makes use of the "FLVPlayback" component. I need for this SWF file
to be published as an Actionscript 3.0 file, so I have set my
publish settings to Flash Player 9.0 and Actionscript 3.0, but keep
getting an error as follows:
"WARNING: The component 'FLVPlayback' requires ActionScript
2.0."
Has anyone encountered this?? I am doing something wrong? I'm
pretty comfortable within Actionscript/Flash 2.0, but am only
beginning my first steps into the relam of CS3 and AS3.
I have also attached a screenshot of the files that represent
my FLVPlayback component (or so I assume). (see this link for
attachments
http://www.actionscript.org/forums/showthread.php3?t=140886)
Thanks all,
Mark
http://www.actionscript.org/forums/showthread.php3?t=140886

Mark,
> I have set my publish settings to Flash Player 9.0 and
Actionscript
> 3.0, but keep getting an error as follows:
>
> "WARNING: The component 'FLVPlayback' requires
ActionScript 2.0."
Gotcha. You must have started the document in AS2, then
changed the
publish settings. Each version of the language has its own
version of the
FLVPlayback Component (written in the relevant language).
Start over and
compare two compleley new FLA documents: make one for AS3 and
one for AS2.
Open the Components panel and note the differences between
the two. There
are a different set of Components depending on the language
chosen for the
document. Drag the FLVPlayback Component from the Components
panel in an
AS3 document, and you'll have the AS3 version.
David Stiller
Co-author, Foundation Flash CS3 for Designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design."

Error embed / insert Flash CS3 9.0 swf in Acrobat 8.1.2

Goal: embed Flash swf file in Acrobat pdf.
Software: Flash CS3 9.0, Acrobat Pro 8.1.2, Mac OS 10.5.2 (all updates applied as available 3/27/08). If it matters: Quicktime Player 7.4.1. All swf files are associated to open with Flash Player 9 (9,0,115,0).
Hardware: PowerMac Dual 2GHz G5, 9.5 GB RAM
Error Description: This error is seen on 2 out of 3 PowerMacs; the 3rd PowerMac will inexplicably work. Here is what is done to receive error: Open pdf document in Acrobat. Select Movie Tool from Advanced Editing Toolbar, choose swf file from Desktop (pdf file is also saved on Desktop to eliminate network considerations). All defaults are retained in dialog window, when "OK" is pressed, status message "Initializing authoring system" appears and remains indefinitely. "Cancel" is pressed and produces following error message window: "Cannot create the movie annotation because the movie could not be loaded. This can occur if the file cannot be found or the URL is unreachable (make sure proxy server settings are correct)."
Adobe Support claims Leopard incompatibility with embedded Quicktime 7.3.1 (I have updated to 7.4.1). Also, AS recommended file association of swf to Flash Player exclusively. Have taken all actions recommended...still have problem.
Anyone have any ideas?

I believe that the latest version of QuickTime which you no doubt have installed does not support the latest version of Flash (9.0). Since Acrobat depends on QuickTime for multimedia in Acrobat 8 Professional, this feature breaks.
What needs to happen is for the next version of Acrobat to support Flash directly, not using QuickTime.

How to add special characters in Flash CS3

Hi, i need the help of some flash guru… these last weeks we were working with cloversites.com to build a community website… the interface is awesome etc etc however we in Malta have eight special characters (GCZ with a dot on top of them and an H with a second strikethrough). Those at cloversites wrestled with the problem, they could see the characters on their computers but when they entered the text in the site, flash couldn't render the special characters. Here is their message:
I am extremely sorry about this, but we were unable to add in your characters. We attempted to add them into our software but they did not work. We worked on it all morning and realized that we need an extra add-on for our keyboards. Adding special characters is nothing new to us and have answered this request for many of our international users. For some reason, the Maltese characters did not work in our sites. For example, our "option-G" is the copyright symbol so it will need to be transferred over to international characters.
Unfortunately, we thing that this has to do with Adobe Flash CS3. The software allowed me to embed the characters, but we were unable to render them on the web. Which led us to think it had to do with the version Adobe is running and its inability to render the text through its software on the web. None of the characters worked on the web, and it looks like its just an Adobe bug. So we are able to type and use the Maltese characters, but Adobe Flash is having trouble with them.
Does anybody know of any possible solution?

see if codepoints-to-string() is suitable for you ..
Re: how to concatenate hexadecimal value to string in XQuery in PS Message Flow

How to create a comment form in Flash CS3

I am trying to create an add comment form in Flash cs3. I
have the background design and the text input areas and sub mit
buttons. But how do I get the submit button to add the comment to a
different area in the same flash file? My inputs and buttons are on
the left side of the stage and my display comments is on the right
side of the stage. How do I connect the two?

The user types something into a text input space and when the
user then uses the submit button, you want that same, user entered,
text to display in another, different, text area? If that's the
case then make that second text area a dynamic textfield and set
its text property to the text property of the input text
space.

How to creating a web banner in Flash CS3?

Hi all,
I'm very new to Flash CS3. Can anyone give me a step-by-step
instructions on how to make a banner for a web-site? Or a link were
i can find step-by-step instructions?
I have googled it but found no real help. I have tryed
"Youtube" hoping to even fine any one (most likely a child) with
directions on how to do this. Funny thing is that it seems most 8
year olds are better at Flash CS3 than I am & i'm 45.
Anyway, if you can help please make it simple or for the
simple minded. :)
Thanks to all!!
BJ

I understand your pain...I just posted a similar request
earlier today for help but finally figured it out on my own. I've
done lots of searching online and used Adobe's Flash Classroom in a
Book and also took an online ed2go class and I still don't have a
good handle on Flash. Nothing seems to give clear step by step
directions on animating images for web banners. You just have to do
a lot of trial and error. These websites may help if you don't have
time for the classes:
http://www.smartwebby.com/Flash/default.asp
http://animation.about.com/lr/flash_animation/150331/1/
mek113

Strange MC duplication in FLash CS3

Similar Messages

Maybe you are looking for