Strange Probelm with ABAP Editor

Hi Experts,
I am facing a strange problem with the editor, it behaves like NUMLOCK key is on i.e insert mode.
When i change the settings from front end editor to old editor it goes away.
There is no numlock key on my computer also when i write anything in a worpad its in a normal mode.
Is there any settings for front end editor to close this numlock key?
I tried rebooting my system , logged off and logged in again no success.
Any ideas?
Thanks

Don't know - how does it work on other machines?
Rob

Similar Messages

Aperture - strange behavior with external editor

Although I don't do this often, there are times I need to edit images with a 3rd party editor like Elements or Pixelmator. I noticed when I send an image by Photos> Edit with Pixelmator, the image that comes in is lacking any edits I may have created previously, particularly with Nik filters. Obviously, those edited versions are not being exported to the editor correctly. However, if I first "export" the image, and then bring it in an editor, the edits are carry over as one would expect. I am using the latest versions of both Aperture and Lion.
Anyone else noticing this and is there a way to change this strange behavior?
Ken

Hi Perfectism-
Most likely it is a bad power supply brick. This can be difficult to troubleshoot as the drive appears to spin up and the little light blinks but that is about all you get.
If the drive is still under warranty contact LaCie about replacing the power supply brick.
Luck-
-DP

Probelm with layout Editor

i have 5 JButtons and i want to put them on a panel vertically and not horizontally?
i am using Flow Layout editor but it is placing the button horizontally in 1 row
how to put each button under other button

which 1 i have used null layout also but whr=en i ad this panel to my main panel it does not appear

JPlatin ABAP Editor problem

I have some problems with ABAP Editor for Java Frontend, some programs are showed with blur data
see http://picasaweb.google.com/clebersantz/General#5246954499862047650
Anyone can solve this ?
Regards,
Cleber Santz

Hello,
does this mean you are using SAP GUI for Java? Which version?
Please double check with SAP GUI for Java 7.10 rev 6 available on the [SAP GUI Family page|SAP GUI Family]. In case the issue is still reproducible, please create a [bug report|http://service.sap.com/message] and provide sufficient information like described in [note 326558|https://service.sap.com/sap/support/notes/326558].
Best regards
Rolf-Martin

Problem in calling abap editor with the program name in Web Dynpro ABAP

Hi,
I have to caal ABAP Editor screen with the display of program after clicking a button from web dynpro abap application.
I am able to call the ABAP Editor initial screen, but i want the editor display screen with a program.
How to do that?
Please find my code below:
DATA : FINAL_URL TYPE STRING,
         URL TYPE STRING.
DATA: LV_HOST TYPE STRING,
        LV_PORT TYPE STRING.
DATA V_TCODE TYPE TCODE.
DATA: LO_WINDOW_MANAGER TYPE REF TO IF_WD_WINDOW_MANAGER.
DATA: LO_API_COMPONENT TYPE REF TO IF_WD_COMPONENT.
DATA: LO_WINDOW         TYPE REF TO IF_WD_WINDOW.
DATA: LD_URL TYPE STRING.
V_TCODE = 'SE38'.
*Call below method to get host and port
CL_HTTP_SERVER=>IF_HTTP_SERVER~GET_LOCATION(
     IMPORTING
       HOST = LV_HOST
       PORT = LV_PORT ).
CONCATENATE 'http'
'://' LV_HOST ':' LV_PORT '/sap/bc/gui/sap/its/webgui/?sap-client=&transaction=' V_TCODE '&OKCODE=SHOW'
INTO URL.
LO_API_COMPONENT = WD_COMP_CONTROLLER->WD_GET_API( ).
LO_WINDOW_MANAGER = LO_API_COMPONENT->GET_WINDOW_MANAGER( ).
LD_URL = URL.
CALL METHOD LO_WINDOW_MANAGER->CREATE_EXTERNAL_WINDOW
    EXPORTING
      URL    = LD_URL
    RECEIVING
      WINDOW = LO_WINDOW.
LO_WINDOW->OPEN( ).
Now, how to pass my Zprogram name into the URL.
I need to get the editor screen with the display of the program.
Thanks,
Radhika

Hi Kiran,
Please find my code below:
DATA :   URL TYPE STRING.
DATA: LV_HOST TYPE STRING,
        LV_PORT TYPE STRING.
DATA: LO_WINDOW_MANAGER TYPE REF TO IF_WD_WINDOW_MANAGER.
DATA: LO_API_COMPONENT TYPE REF TO IF_WD_COMPONENT.
DATA: LO_WINDOW         TYPE REF TO IF_WD_WINDOW.
DATA: LD_URL TYPE STRING.
*Call below method to get host and port
CL_HTTP_SERVER=>IF_HTTP_SERVER~GET_LOCATION(
     IMPORTING
       HOST = LV_HOST
       PORT = LV_PORT ).
CONCATENATE 'http'
'://' LV_HOST ':' LV_PORT '/sap/bc/gui/sap/its/webgui/?&transaction=se38&RS38M-PROGRAMM=Y2PSOLTREE&~okcode=shop'
INTO URL.
LO_API_COMPONENT = WD_COMP_CONTROLLER->WD_GET_API( ).
LO_WINDOW_MANAGER = LO_API_COMPONENT->GET_WINDOW_MANAGER( ).
LD_URL = URL.
CALL METHOD LO_WINDOW_MANAGER->CREATE_EXTERNAL_WINDOW
    EXPORTING
      URL    = LD_URL
    RECEIVING
      WINDOW = LO_WINDOW.
LO_WINDOW->OPEN( ).
Here,, Y2PSOLTREE is the program, that should show in SE38 screen.
I used the above code, but still it is showing the SE38 initial screen.
Thanks,
Radhika

What is the meaning of ABAP/4 editor integrated with ABAP/4 data dictionary

hi All
i want the correct meaning of the following sentence <b>"What is the meaning of ABAP/4 editor integrated with ABAP/4 data dictionary"</b>.If any onre knows kindly explain me...
thanks in advance...

Hi,
Abap is programming language in business, data dictionary is kind a interface for editor to retrive from database level to presentation area. its a meta data.
The ABAP Dictionarys integration with the rest of the development environment enables ABAP programs to automatically recognize the names and characteristics of dictionary objects.
Additionally, the system provides easy navigation between development objects and dictionary definitions. For example, as a programmer, you can double-click on the name of a dictionary object in your program code, and the system will take you directly to the definition of that object in the ABAP/4 Dictionary.
Reward points if helpful,
regards,
jinesh

Editing ABAP Program with out using ABAP Editor

Dear Gurus,
I know that ABAP Programs like SAPMSSY1, etc. are stored in Table D010S or REPOSRC as per the version of the SAP Released.
my problem is that whem i open the table REPOSRC (Having around 34 colums), no doubt thati found the program list but i am not be able to see any thing which is written in Program language..!
how I will be able to access these program in there source language and so make certain changes in them.
actually during the RFC Logon, I am getting the error that "Error in Reading Program SAPMSSY1"
R/3 Basis System: Run-time error "GEN_SOURCE_FORMAT " occurred in accessing SAPMSSY1.
So pls tell me where I can find the actual program language so that I can make certian changes in them.
Pls REMEMBER THAT I CAN NOT USE ANY T-CODE LIKE SE36 etc. TO ENTER INTO ABAP EDITOR, AS STILL I AM NOT LOGGED ON. AT THE TIME OF GUI LOGIN I AM GETTING THE SYSTEM ERROR MESSAGE "DUMMY". WHAT THIS IS MEAN FOR??
Regards,
Abhishek

I CAN NOT ENTER INTO THE SYSTEM. AS I GOT THIS ERROR IN THE LAST STEP (RFC JOBS- POST PROCESSING) OF MY SAP INSTALLATION.so can not log in into the system.
SO WHERE I CAN MODIFY THE PROGRAMMING OF "SAPMSSY1" ?
AND RESOLLVED THE ABOVE SAID PROBLEM.
I am using ORACLE 9i with patch 92080 on Windows 2000 Server with SP 4
SAP Kernel is 620 with patch no. 251 and patch level 0
SAP GUI IS 710
Abhishek

Probelm with the sql editor window

hi
i ahve installed sql developer 1.5.1
when i run the sql command the result pane display has the overlapped columns.
at times the result rows are shown twice.
there is some issue with the editor used in the sql editor window

You should upgrade to 1.5.3 if you can.
These type of display issues are often a result of problems with java and the display adapter.
What version of java are you using?
What operating system and version are you using?

New ABAP editor - opinions

I am interested to know other people's opinions on the new ABAP Editor and Debugger. I just started to use the new editor and I am kind of dissapointed:
- the code completion feature is a far cry from the Java editor. It shows only one element in the code completion list based on a strange rule (I think it is first in the alphabetical order, and then based on the previously selected item)
- it does not provide code completion for types
- the code completion dissapears after a short period of time (why isn't the code completion triggered on a CTRL-key ?!)

It appears that you are focusing on the code completion as the source of your disappointment. Let me brighten your day a bit by saying that the real code completion has not yet been shipped. In a future release of Netweaver, there will be full code completion very similar to what you have in the java area, where you will type a class name and get a list of methods to choose from. This functionality is not there in NetWeaver 7.0, but if you pay close attention when working in the editor you will see small pieces that will evolve into the full blown code completion. For example, in your editor type.....
at selection-screen o
After you typed the "o", there should have been a dropdown box with a bunch of suggestions to complete the statement. (This may not work depending on the gui, but it does in my system, NetWeaver 7.0 SP10, using Gui 7.10 Patch 1.
So again, you are right, the code completion is not really up to par, and never really claimed to be, but just wait, the real code completion is coming.
Regards,
Rich Heilman

Your thoughts on the new ABAP editor

I am interested to know other people's opinions on the new ABAP Editor and Debugger. I just started to use the new editor and I am kind of dissapointed:
- the code completion feature is a far cry from the Java editor. It shows only one element in the code completion list based on a strange rule (I think it is first in the alphabetical order, and then based on the previously selected item)
- it does not provide code completion for types
- the code completion stays on for a short period of time, after that it dissapears. Is there a key combination that can launch the code completion on demand?

Hello Tiberiu,
With the new Editor, you can launch the code completion with the combination "Ctrl + Space".
Regards,
Walter

Saving bookmarks in the new ABAP editor?

Hi experts,
either I'm stupid or something but I don't see how I can save my code boomarks for future usage. I mean the bookmarks which can be created by CTRL + ALT + number and navigation to them by CTRL + number.
The similar problem I have with saving my break-points set in the new ABAP editor.
Could you please give me a tip how I can save it I'm using SAP GUI 710 patch level 4.
Thanks in advance!
ZDENEK STASTNY
ABAP programmer
We are now in upgrade process 4.6C to SAP ERP 2005

Hello,
Use "Tab" instead of "ENTER"

Commenting a Line in ABAP Editor when using SAP GUI for java

Hi,
In ABAP editor we can highlight the line which are to be comment and use cmd+< sign to comment those lines. What will be the command to be used to achieve the same functionality when using SAP GUI for JAVA on an iMac.

Hello Kedar,
please check with SAP GUI for Java 7.20 rev 5 before submitting a bug report.
Also please verify, that cmd-< and cmd-> are not assigned as "Keyboard Shortcuts" in the "Keyboard" control panel of "System Preferences".
Bug reports can be submitted with the [SAP Message Wizard|http://service.sap.com/message], for SAP GUI for Java please use component BC-FES-JAV.
Best regards
Rolf-Martin

Pdf live cycle form through sap abap editor to validate user input by java script coding

I am new to apply a java script in a Adobe form.
So i need of help that i have 9 page form of HR module i need to verify every blank field and wrong entry field also.
I look around a lot of code but still i am not able to perform good validation in a Adobe form.
I am using SAP ABAP editor where i am making through PDF Live cycle FORM & try to put java script validation on the field.
My problem is that how can i link or configured to Adobe form.
Here are some event are given "mouseup","validate" or more are given.So how i can do.
i wrote the code like
/ Get the field value
var f1 = this.getField("VORNA");----why it is not working.Some thing is wrong?
var v1 = f1.valueAsString;
if (v1) {
} else {
app.alert("Field: " + f1.name + " is blank.", 1);
//above code is not working.
but here we used rawValue() method it works , but it popup message javascript with window error.
if( this.rawValue()==' ' || this.rawValue==null)---------this works
xfa.host.MessageBox("First name is blank!");---------this works
"VORNA" is "First name" field name binding with this value.
How we can linked java script file with Adobe form.
Kindly help me

You're mixing code for an acroform with code for an XFA form. SInce you're creating the form with LiveCycle Designer, it wold be better if you posted this to the LiveCycle Designer forum, if you haven't already.

Pdf live form through sap abap editor to validate user input by java script coding

I am new to apply a java script in a Adobe form.
So i need of help that i have 9 page form of HR module i need to verify every blank field and wrong entry field also.
I look around a lot of code but still i am not able to perform good validation in a Adobe form.
I am using SAP ABAP editor where i am making through PDF Live cycle FORM & try to put java script validation on the field.
My problem is that how can i link or configured to Adobe form.
Here are some event are given "mouseup","validate" or more are given.So how i can do.
i wrote the code like
/ Get the field value
var f1 = this.getField("VORNA");----why it is not working.Some thing is wrong?
var v1 = f1.valueAsString;
if (v1) {
} else {
app.alert("Field: " + f1.name + " is blank.", 1);
//above code is not working.
but here we used rawValue() method it works , but it popup message javascript with window error.
if( this.rawValue()==' ' || this.rawValue==null)---------this works
xfa.host.MessageBox("First name is blank!");---------this works
"VORNA" is "First name" field name binding with this value.
How we can linked java script file with Adobe form.
Kindly help me.

You're mixing code for an acroform with code for an XFA form. SInce you're creating the form with LiveCycle Designer, it wold be better if you posted this to the LiveCycle Designer forum, if you haven't already.

Mismatch in linenumbers of ABAP editor and debugger

Hi all,
although the ABAP program is shown as active in our editor, we sometimes have a mismatch in line numbers between ABAP editor and debugger.
E.g.: FORM ITEM_PRINT in report RVADOR01 starts at linenumber 1403 in our ABAP editor. Debugger shows line number 1410 as startline.
When I try to set a breakpoint in editor at line 1403, the breakpoint is displayed in line 1410 of the editor.
I cannot navigate forward to FORM ITEM_PRINT and when I select FORM ITEM_PRINT in the objects tree in SE80, cursor jumps to line 118 of source code.
We use new editor and debugger and have installed SAP ECC 6.0 EHP3.
Any suggestions?
Regards,
Hubert
Edited by: Hubert Heitzer on Jul 30, 2009 7:36 AM
Edited by: Hubert Heitzer on Jul 30, 2009 7:41 AM

Hi Lakshman,
thx a lot for your help, nearly all my Problems are solved.
Generating a new navigation index cleared problems with forward navigation and objects tree in SE80.
I applied OSS Note 1279209.
SAP Note 986915 is for SAP_BASIS 640, we are at 700, so I didnt apply it.
Mismatch in line numbers between ABAP editor and debugger in some source codes still remains.
I take report RVADOR01 again as example - like in my startpost:
In my editor FORM ITEM_PRINT starts in line 1403 of RVADOR01
When I set a breakpoint in this form, eg.
CALL FUNCTION 'WRITE_FORM' "First header
and my debugger stops at this BP, I see that FORM ITEM_PRINT starts at line 1389 (now!!! unlike before at my startpost, which was 1410).
Regards,
Hubert

Strange Probelm with ABAP Editor

Similar Messages

Maybe you are looking for