Strange problem - app install failed randomly - OSD SCCM 2012 R2

Hi,
We have this problem for a few weeks and despite various test the problem persists. I hope the community can help me on this problem.
Problem : During TS New computer Win 7 x64 or X86 OSD, app failed to install randomly. Some example
: on the same model, morning OSD test, all app located on TS will be installed, then test the afternoon and no application is here. Sometimes, it works during 4 days and after doesn't work during 1 week / 2 day, it's very randomly. Problem is here for all
models.
Test made :
Add reboot step in TS just before install app > Not ok
Change deployment option app TS to : "Download content and run locally" > Not ok
Add following properties to the client agent in TS : SMSMP=SCCMSRV.domain.lan DNSSUFIX=Domain.lan > Not ok
Enable anonymous mode > Not ok
Informations :
App concerned : Adobe flash, google chrome etc...
Domain integration : OK
App installation tested across software center : OK
Account service for distribution app : OK
Some errors that i've notice :
Policy Evaluation failed, hr=0x80004005 (smsts.log)
Install application failed: 'Adobe Shockware Player'. Error Code 0x80004005 InstallApplication
(smsts.log)
Policy prevents failover to WINS for lookup (LocationServices.log)
Error sending HEAD request. HTTP code 401, status 'Unauthorized' (LocationServices.log)
No error in AppEnforce.log
Do you have an idea ? Thank you in advance.

Finally the pause Works and all app was installed after 8 test on different models.
For my case I following this order :
- 1 Before install app: Put a pause (3m) with this script
Set fso = CreateObject("Scripting.FileSystemObject")
Wscript.Sleep 180000
And this command line : %SYSTEMROOT%\System32\wscript.exe Pause_TS_3m.vbs
- 2 Then put a pause ( about 30s) before each app with a run command line ping :
cmd.exe /c "ping -n 30 localhost" > NUL
As Damon
A. Johns say "At the very least it can result in unreliable results."
Well I hope i'll find a reliable solution, thanks a lot all for help me it was a long time to test.
These topic help me :
http://social.technet.microsoft.com/Forums/en-US/221bcfe8-4c1e-4766-be5b-fbf54fe0e66c/specific-model-suddenly-fails-on-any-application-install-packages-work-fine?forum=configmanagerosd
http://social.technet.microsoft.com/Forums/systemcenter/en-US/17cc2c51-2769-4a43-b456-570373b24643/pausing-the-sccm-osd-task-sequence?forum=configmgrosd

Similar Messages

Operating system install fails and reboots SCCM 2012 r2

Image was working and pushing out just fine then stopped. Might have been when we upgraded from adk8 to adk8.1 not sure.
Below is log from client machine. Very new to Sccm and I don't know what I am to look for. Variables.dat is red and failing but I don't know what that is or where I check that data? Nic is working as I can map to share and copy off
log files so I don't believe it is a nic issue.
Thanks for any help!
==============================[ TSBootShell.exe ]============================== TSBootShell 8/25/2014 10:20:04 AM 868 (0x0364)
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL' TSBootShell 8/25/2014 10:20:04 AM 868 (0x0364)
Debug shell is enabled TSBootShell 8/25/2014 10:20:04 AM 868 (0x0364)
Waiting for PNP initialization... TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
RAM Disk Boot Path: NET(0)\BOOT\X64\IMAGES\BOOT.SHQ0003D.WIM TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
Booted from network (PXE) TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
Network(PXE) path: X:\sms\data\ TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
Found config path X:\sms\data\ TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
This is not a fixed non usb disk TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
Booting from removable media, not restoring bootloaders on hard drive TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
X:\sms\data\WinPE does not exist. TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
X:\_SmsTsWinPE\WinPE does not exist. TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
Executing command line: wpeinit.exe -winpe TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
Executing command line: X:\WINDOWS\system32\cmd.exe /k TSBootShell 8/25/2014 10:20:05 AM 868 (0x0364)
The command completed successfully. TSBootShell 8/25/2014 10:20:05 AM 868 (0x0364)
Successfully launched command shell. TSBootShell 8/25/2014 10:20:05 AM 868 (0x0364)
The command completed successfully. TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
Starting DNS client service. TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
Executing command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\ TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
The command completed successfully. TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
==============================[ TSMBootStrap.exe ]============================== TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
Command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\ TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL' TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
Succeeded loading resource DLL 'X:\sms\bin\x64\TSRESNLC.DLL' TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
Current OS version is 6.2.9200.0 TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
Adding SMS bin folder "X:\sms\bin\x64" to the system environment PATH TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
PXE Boot with Root = X:\ TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
Executing from PXE in WinPE TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
Loading TsPxe.dll from X:\sms\bin\x64\TsPxe.dll TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
TsPxe.dll loaded TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Device has PXE booted TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Succesfully added firewall rule for Tftp TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Executing: X:\sms\bin\x64\smstftp.exe -i 172.16.1.5 get X:\sms\data\variables.dat TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Command line for extension .exe is "%1" %* TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Set command line: "X:\sms\bin\x64\smstftp.exe" -i 172.16.1.5 get X:\sms\data\variables.dat TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Executing command line: "X:\sms\bin\x64\smstftp.exe" -i 172.16.1.5 get X:\sms\data\variables.dat TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Process completed with exit code 1 TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Succesfully removed firewall rule for Tftp TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
uExitCode == 0, HRESULT=80004005 (e:\nts_sccm_release\sms\server\pxe\tspxe\tspxe.cpp,185) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Failed to download pxe variable file. Code(0x00000001) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
PxeGetPxeData failed with 0x80004005 TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
HRESULT_FROM_WIN32(dwError), HRESULT=80004005 (e:\qfe\nts\sms\client\tasksequence\tsmbootstrap\tsmbootstraputil.cpp,1459) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
TSMBootstrapUtil::PxeGetPxeData(&bPxeBooted, sVariablesFile, sPxePasswd), HRESULT=80004005 (e:\qfe\nts\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2665) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
oTSMediaWizardControl.Run( sMediaRoot, true, sTSLaunchMode ), HRESULT=80004005 (e:\qfe\nts\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1078) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Execute( eExecutionEnv, sConfigPath, sTSXMLFile, uBootCount, &uExitCode ), HRESULT=80004005 (e:\qfe\nts\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1226) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Exiting with return code 0x80004005 TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
hMap != 0, HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentscope.cpp,493) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,335) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
this->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,553) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Execution complete. TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
hMap != 0, HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentscope.cpp,493) TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
m_pGlobalScope->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,335) TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
this->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,553) TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
::RegOpenKeyExW (HKEY_LOCAL_MACHINE, sKey.c_str(), 0, KEY_READ, &hSubKey), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\utils.cpp,809) TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
RegOpenKeyExW is unsuccessful for Software\Microsoft\SMS\Task Sequence TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
GetTsRegValue() is unsuccessful. 0x80070002. TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
End program: TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
Finalizing logging from process 864 TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
Finalizing logs to root of first available drive TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
Successfully finalized logs to X:\SMSTSLog TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
Cleaning up task sequencing logging configuration. TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)

Found problem:
was not reinstalling pxe and wds in right order. followed this thread
http://blogs.technet.com/b/configurationmgr/archive/2011/01/05/troubleshooting-the-pxe-service-point-and-wds-in-configuration-manager-2007.aspx
now all is working again.

0x80004005: app install failed - OSD SCCM 2012 R2 - randomly

Hi,
I have visited many forums with this error before posting.
Problem : During TS New computer OSD, app failed to install randomly on all model Win 7 x86 or x64.
Information :
App concerned : Adobe flash, office, chrome...
Domain integration : OK
App installation tested across software center : OK
smsts.log error :
Policy Evaluation failed, hr=0x80004005
Install application action failed: 'Adobe Shockwave Player '. Error Code 0x80004005 InstallApplication
LocationServices.log error :
Policy prevents failover to WINS for lookup
Successfully sent location services HTTP failure message.
Error sending HEAD request. HTTP code 401, status 'Unauthorized'
Client is not assigned to a site. Cannot get security settings.
Client is not assigned to a site. Cannot get site signing cert.
An idea ?

Hi,
I create another topic and my problem (App install during OSD) is now solved yes:
http://social.technet.microsoft.com/Forums/en-US/bb10bfc3-f5ec-46a6-9535-ea299266795c/strange-problem-app-install-failed-randomly-osd-sccm-2012-r2?forum=configmanagerosd#f54d0af1-2658-49ee-a57a-1ec9e2b09a3e
You can Check "Continue on error" inside "Options" Tab on your TS. Even if App install fail At least the rest ends well...

OSD SCCM 2012 R2: 0x80004005: app install failed

Hi,
I have this application in a simple task sequence which fails to install (error 0x80004005).
The application itself installs correctly in a windows session. It has "Allow this application to be installad from the Install Application task sequene ..." enabled.
Also when I run the installation manually in the tasksequence (next to the error I open a dosbox -F8- and map the source, run the exact command of the application "msiexec ...") this install correctly.
Error in smsts.log =Installation job completed with exit code 0x00000000   InstallApplication   26/02/2014 12:50:09   2320 (0x0910)
Execution status received: (Application download failed )   InstallApplication   26/02/2014 12:50:09   2320 (0x0910)
App install failed.   InstallApplication    26/02/2014 12:50:09   2320 (0x0910
Not sure why it tries to download and why it fails. Network access account is ok.
Please advise.
J.
Jan Hoedt

Execution status received: (Application download failed )   InstallApplication   26/02/2014 12:50:09   2320 (0x0910)
I totally missed that line when I read your posting first. Check CAS.log, LocationServices.log and ContentTransferManager.log.
Torsten Meringer | http://www.mssccmfaq.de

Question in Installing exchange connector in SCCM 2012 R2

Hi,
I am installing Exchange connector in SCCM 2012 R2 environment. I have Exchange 2010 SP3 in my environment.
While adding the exchange connector wizard, in the Settings page, I am confused which option to select in
"ALLOW EXTERNAL MOBILE DEVICE MANAGEMENT". The options are
Exchange Default, Allowed and Prohibited.
As per my requirement, i just need the mobile device inventory. Nothing else is required. I have found that incorrect settings here will not allow the users to receive mails.
Can anyone please guide me that which option needs to be selected here as all the settings will be managed by Exchange only and SCCM just requires the inventory information.
Thanks.
-AB
-Thanks AB

So, I think the correct option should be Exchange(Default). Please correct me if I am wrong.
You would have to ask your Exchange admin how it is configured. Wally already provided the link which explains it: "If the mobile device synchronizes with Exchange Server, set the Exchange flag
AllowExternalDeviceManagement to ensure that the mobile device continues to receive email from Exchange after it is enrolled by Configuration Manager. If you install the Configuration Manager Exchange Server connector, you
can set this flag by configuring the option External mobile device management in the Exchange Server connector properties" So it has to be set to "allowed" somehow (either by specifying it in the connector's
properties or using the Exchange settings).
Torsten Meringer | http://www.mssccmfaq.de

Strange problems after installing Solaris 10 u6 on 64-bit PC

Hi all,
I have run into some very strange issues after installing Solaris 10 update 6 on my 64-bit PC (it's almost new). The problems are with graphical applications and desktop environments based on GTK (so it seems, at least).
I have installed Solaris normally, following most of the default options and choosing the "Entire Group" software packages installation. However, after the first login I've seen that:
1. No user creation process was offered to me and I had to login as root (I find it pretty strange)
2. After logging in as root into JDK system, my screen went blank for a couple of seconds and then the system threw me back to the login screen.
3. Logging into the old CDE environment was possible, but launching Firefox from there (using a command line terminal) wasn't. It gave me the following error message:
ld.so.1: firefox-bin: fatal: libmlib.so.2: open failed: no such file or directory
ld.so.1: firefox-bin: fatal: relocation error: file /usr/bin/firefox/firefox-bin: symbol gtk_init: referenced symbol not found.
It's very strange because GTK toolkit and JDK environment are supposed to be the core functionalities provided by Solaris. Does anyone have an idea what's going on?
My system sum-up:
CPU: Intel Core 2 Quand Q6600 @ 2.4 GHz
RAM: 2 Gb of DDR2 SDRAM
Motherboard: MSI MS-7529 (Intel G31 chipset)
Monitor: AOC LM725
Graphics card: NVIDIA GeForce 9400 GT
Hard disk: 2 Western Digital HDs (SATA) 320 Gb each,
1 Western Digital external USB HD MyBook Essential 2, 500 Gb
DVD drives: 2 LG DVD drives (SATA)
Network card: Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC
I use my system in the following way:
On the first hard disk, I have a one-partition 32-bit Windows XP SP3 installation (ported from my old computer).
On the second hard disk, I have a functioning Fedora Core 9 installed on the first half of the disk's space (the installation is self-organized into several Linux partitions, e. g. /boot, /swap etc; I am a newbie so I don't know too much about Linux partitioning - only specified to Fedora how much space it could use for its volume group). I installed Solaris onto the second half of the second disk.
It has be noted that my USB external drive seemed to conflict with the network or graphics cards during the Fedora installation and caused it to hang sporadically, so I installed Fedora with this disk detached. I also detached it when I was installing Solaris, though it seems to have not influenced the problems I experienced. I also have attempted installing Solaris before I did so with Fedora, but had the same issues.

Well, it seems that the cause of the problem was that my DVD image was just corrupted - I didn't check it vs MD5 codes supplied by Sun assuming it went automatically OK. I downloaded the image again (this time it was OK), reinstalled the system and successfully logged into JDS. However, I am still puzzled why Solaris doesn't offer to create a default non-root user during the installation process.

Air app install fail in IE with Badge Installer Error # 2032

Much has been written about this problem, and the most quoted solutions are
Ensure the appurl FlashVar is not a relative url but fully qualified http://domain.com/app.air
Uninstall and reinstall Air
Empty browser's cache
None of these have solved my issue and I still have a reproducible bug.
I have set up a badge installer at http://tx.flamjam.com/mms/ which attempts to install appurl=http:/tx.flamjam.com/mms/MMSReview.air
This works beautifully in OS X but fails in Windows with the error window,
Sorry, an error has occurred.
The application could not be installed. Try installing it again. If the problem persists, contact the application author.
Error# 2032
I've tested IE and Chrome, both updated to the most recent versions.
When Air is not installed I get a slightly different error message, with no error number.
The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.
With Air installed, if I instead visit the appurl directly in the browser — http:/tx.flamjam.com/mms/MMSReview.air — the file downloads and installs without problem.
To the best of my knowledge, the error is a generic stream error which essentially means that the appurl could not be found. To demonstrate this, simply use a fictitous appurl and now the same error can be seen on OS X as well. This implies that something is malforming the appurl withing the badge, but I have modified the status display text of the badge to display the appurl parsed from the LoaderInfo object containing FlashVars payload and can confirm that the appurl appears to be consistent between OS X and Win.
Log file in next post.
I'll continue digging for a solution, and post my findings here, but would value other's input on this subject greatly.

An interesting development.
When I monitor my network traffic using ServiceCapture I can see that no attempt is made to connect to the appurl, with the install failing instantly without even attempting to connect to the appurl.
ServiceCapture on OS X confirms the attempt to connect to the appurl even if the url is deliberately fictitous resulting in a 404 response.
The badge begins the installation process using the installApplication method of the following file
http://airdownload.adobe.com/air/browserapi/air.swf
which the badge loads on startup.
It would appear to me that the installation problem is failing inside that loaded swf's code, but I'm at a loss as to how to debug that.

Strange problem: apps are self clonning / duplicating

I have a very strange problem since the last update, if I go to my Applications Folder and press cmd-alt + i (get info) and click over an app while the info window is open, it gets cloned (more than duplicated) because if I trash one of the two displayed apps, both get trashed.
Mac OS X 10.4.5
2 GHz Intel Core Duo

Somehow I believe you have a problem with your finder refreshing windows or not doing something fast enough.
My suggestion, repair permissions
If that does not work, then try the following, in your user Library, go to preferences and change "com.apple.finder.plist" to "com.apple.minder.plist" or anything that is not there.
Either restart the findar via dock or logout and login.
Check to see if things are alright. If they are you can trash the "com.apple.minder.plist" if not, then trash the new "com.apple.finder.plist" and change back the "com.apple.minder.plist" to "com.apple.finder.plist". The problem is elsewhere.
Deivy

Task Sequence Failed 0x80091007. SCCM 2012 R2 OSD

Hi,
I have multicast deployment issue with Configuration Manager 2012 R2.
Unicast is working fine, Multicast throwing error 0x80091007.
Wait time starts and after 40 to 50 seconds pops up with error 0x80091007
I have already tried Redistributing and recreating image, trying with different systems, Direct access from DP settings, validating share access and all.
There is no SMSTS.LOG available on client systems.

Hi,
How about MCSISAPI.log?
Here is a blog talks about this error, you could have a look.
"Update 19-6-2013: Nick send me a possible solution in comments. What you have to do is make sure you don't have a custom Multicast range set - use the setting "Use IPv4 addresses within any range"
in the SCCM 2012 multicast tab under Distribution Point properties.
The default is 239.0.0.1 to 239.0.0.254 - if you have a custom range set - it IGNORES it and uses a random address in 239 range anyways. He has tried to statically set a 239 range on both SCCM multicast and WDS multicast settings - ignores them still uses a
random address in the 239 range regardless.
On your Cisco core - if your using that - make sure your ACL's and Rendezvous Point ACL for PIM permits the 239 range. As soon as this was done it's all working. > Will try that myself next month! "
http://henkhoogendoorn.blogspot.com/2013/02/multicast-error-0x80091007-during.html
(Note: Microsoft provides third-party contact information to help you find technical support. This contact
information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

ProClarity 6.3 PAS install fails on Windows Server 2012

We are trying to install PAS 6.3 on Windows Server 2012 and the install fails with the following error
The following requirements are missing:
Windows Server 2003 SP1
We have successfully installed on Windows Server 2008 R2, so it really isn't a Windows Server 2003 SP1 issue.
Has anyone successfully installed on Windows Server 2012? Is there a way to force the installer not to check for the OS?
Thanks.
Kevin

I have a PAS server running in Windows 2012, by doing exactly the same pre-requisites that you do in Windows 2008 r2 (iis, Framework, SQL ADO 2005 / 2008). With the Windows Server 2003 SP1 message you can avoid it by doing a really simple thing that
is right click the setup file --> properties, and head to the "Compatibility Tab" and run it with compatibility mode Windows 7, also run it with Admin permissions. This let you pass by the message and let you install the product. Remember, after the
installation, you need to check all the IIS config, folder permissions, that you did in Windows 2008 x64 installation. Also, the App pool needs to work with .NET 2.0 not 4.0.
Good luck!
Byron
BNavas

VMM Agent install fails on Windows Server 2012 R2 Hyper-V

Hi,
We are unable to install VMM 2012 R2 agent on Windows Server 2012 R2 server either from VMM console or manually on the hyper-v server.
Error on VMM Console:
Error (410)
Agent installation failed on chsicoecdh03.casper.com.
Fatal error during installation (0x80070643)
Recommended Action
Try the operation again. If the problem persists, install the agent locally and then add the managed computer.
==================================================================
Error on Hyper-v server:
MSI (c) (E8:D0) [16:53:24:726]: Windows Installer installed the product. Product Name: Microsoft System Center Virtual Machine Manager Agent (x64). Product Version: 3.2.7510.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success
or error status: 1603.
Also, I suspect may be issue with WMI then checked WMI repository and it is in consistent state. winmgmt /verifyrepository.
Please help on this issue.
Any help would be appreciated.
Thanks
Kumaresan Lakshmanan

So, I've managed to research this some more since Thursday and I've come to the conclusion that Hyper-V does a horrible job of supporting Qualcomm NIC cards. That's the only thing I can conclude as far as where the issue is originating. I've read many
post and walkthroughs but nothing that has helped. The issue wasn't with any settings in the domain controller. The issue was that there really is a slow connection originating at the domain controller that is a VM and has network connectivity through the
virtual switch from Hyper-V. So, next question is, how do I get the DC to have better connectivity through the NIC that Hyper-V won't give it? If hyper-v would allow passthrough, this would be so much simpler. VM-ware is looking really good at this point.
Im disappointed in MS right now.

Issue getting WDS to Install for PXE in SCCM 2012 SP1 Primary Site

Hi All
I'm trying to get PXE boot working from our SCCM 2012 box but it never actually gets to the point of installing WDS when I check the box for PXE booting. I don't have SMSPXE.log since it never gets to that point and the distmgr.log never reaches
that point either. I've tried
uncheck pxe boot option - restart - re-check
uncheck pxe-boot - restart - install wds - leave it unconfigured - reboot - check pxe boot
uncheck pxe-boot - uninstall the vcredist 2008 packages - rebooting - install vcredist - check pxe boot option
the above with installing wds unconfigured
Below is the relevant portions of the distmgr.log file after I enable the pxe boot option no matter what manner of software is installed. We are running it on a VM in a Hyper-V 2012 enviornment in Windows 2008 SP2 x64. This issue is similar to this link
WDS PXE Secondary Site Issues but mine is on the Primary Site.
ConfigureDP SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:09 AM 4008 (0x0FA8)
DP registry settings have been successfully updated on TUSC2012.TALISKERUTAH.LOCAL SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
STATMSG: ID=9500 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=TUSC2012.TALISKERUTAH.LOCAL SITE=001 PID=2728 TID=4008 GMTDATE=Thu Mar 28 17:48:10.083 2013 ISTR0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
STATMSG: ID=9503 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=TUSC2012.TALISKERUTAH.LOCAL SITE=001 PID=2728 TID=4008 GMTDATE=Thu Mar 28 17:48:10.084 2013 ISTR0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
ConfigurePXE SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
CcmInstallPXE SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
RegQueryValueExW failed for Software\Microsoft\SMS\DP, PxeInstalled SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
RegReadDWord failed; 0x80070002 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
Running: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
Waiting for the completion of: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
Run completed for: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Created the DP mutex key for WDS. SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Finding Wimgapi.Dll SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
MsiEnumRelatedProducts failed SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
FindProduct failed; 0x80070103 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
MsiEnumRelatedProducts failed SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
FindProduct failed; 0x80070103 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
GetFileAttributesW failed for SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
FindWimgapiDll failed; 0x80070002 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Running: msiexec.exe /quiet /i c:\program files\microsoft configuration manager\wim\wimgapi.msi /log c:\program files\microsoft configuration manager\wim\wimgapi.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Waiting for the completion of: msiexec.exe /quiet /i c:\program files\microsoft configuration manager\wim\wimgapi.msi /log c:\program files\microsoft configuration manager\wim\wimgapi.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:29 AM 4668 (0x123C)
Created policy provider trigger for ID 16777217 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:29 AM 4656 (0x1230)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:34 AM 4668 (0x123C)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:39 AM 4668 (0x123C)

HI again, sorry for the late reply.
By saying that WDS don't get configured, I mean that when i enabled the PXE functionality, the WDS role got installed but the folder remote install wasn't created.
I ahve now actually gone back to an earlier snapshot from before I started play with the PXE settings of the VM and now nothing happens when activating PXE on the distribution point, but not even the smspxe.log is created.
The Account used is a local admin and the distribution point is located on the primary site server.
EDIT: in the events log, it states the following:SMS_SITE_COMPONENT_MANAGER on computer XXX.XXXX.XXX reported: SIte comoponent Manger failed to to install on this site system.
On error (source: MsiInstaller) below:
Product Application Web Service -- Internal Error 25001. 80070490
I havent mentioned it earlier, but the Server OS is Server 2012.
I hope this might help you help me :)

Updating an App-v 5 package in SCCM 2012, update not applying automatically

Hello, just doing some testing of updating an App-v 5 package in SCCM. The application has been deployed and run on a client pc. I've gone back and opened the package in the sequencer and made some changes and saved it as a new package.
In SCCM I've updated the content and pointed it at the new package. That all looks fine. It's showing the new files in the content.
The application deployment settings are set to required and set to install outside maintenance windows. The client has received the update, I can see it in the software center but it's not being applied automatically.
I've waited over 12 hours so the client has also had its maintenance window but it still has not updated. I've also tried launching the application to see if that would bring in the update but still no joy.
Just wondered what experience other people have had with this?

Firstly, just because you mentioned saving as a new package, if you select that option it will create a brand new v0.0.0.1 package and users settings will not transfer to the new version, so just use save or save as in most cases.
Have you tried logging the user off and on again? And if the app is published globally, rebooting?
If the application is in use, then the update will be delayed until either of these events occur, depending on how it was published. Also, if the app has certain integration points such as shell extensions or browser plugins, these can create a lock on the
package even though you don't have the application running. You can run a powershell command to stop the package and speed things up if you wish, although this runs the risk of terminating explorer.exe or iexplore.exe:
Get-AppvClientPackage *name* | Stop-AppvClientPackage (and add -global to the end if it was globally published)
Dan Gough - UK App-V MVP
Blog: packageology.com
Twitter: @packageologist
LinkedIn

Installing SCRIPT'S from SCCM 2012 R2

Hello
I am using SCCM 2012 R2 in my environment recently. I am able to install SCEP to most of my computers, but there are around 150 computers that are facing difficulty in installing SCEP because of old incompatible antivirus (Password Protected). The protected
password cannot be removed silently and the old antivirus server is already down. I have made a script which will uninstall old antivirus and installs SCEP, and it is running perfectly when installed locally. When i package it and deploy to my collection,
it is not installed on my clients. When i monitor my deployment the package appears in the error tab. I also searched some resources in the internet but of no use. Pls help
Thanks
Ashok

What product is the old antivirus?
All Configmgr is doing is running your script via command line using the local system account.
Download pstools
https://technet.microsoft.com/en-gb/sysinternals/bb896649.aspx
run psexec -i -s cmd.exe from a command line.
This will open another window, check it's open with the system account by typing whoami.
Then run your script from that command line window and see why it fails.

Sccm Agent will not install via push on SCCM 2012 to computers that have sccm 2007 agents

I can not install the sccm 2012 agent on client computers via the push method or selecting the computers in a collection and clicking on install client nothing happens on the clients.
Also another problem is when i install the clients manually on the machines there is no site code and i can not "find site"
in both cases teh machines did have the sccm 2007 agent and were working fine on that.

1.make sure you have created the boundary group first. if you cant push the agent via push method, check the log files.
2. also make sure that in your environment if you have a firewall then there are port need to be open for agent push.
3. also if you have installed MacAfee agent on your client machine make sure the policies are not blocking file and print sharing.
4. also the windows firewall need to open for file and print sharing of you are using push method.
did you try to push the agent via GPO?
IF not try to run the following script in one of the client machine. use this command in the command prompt.
in my case smssitecode is BLL
MP is the management point.
ccmsetup.exe SMSSITECODE=BLL /mp:sccmserver.contoso.com /source:\\sccmserver.contoso.com\sms_bll\client
run the above command in the command prompt of one of the client machine which you cant install the agent and see.

Strange problem - app install failed randomly - OSD SCCM 2012 R2

Similar Messages

Maybe you are looking for