Strange: stored exit -1 in hotbackup and archive mode

Hello all,
we got strange problem with enabled hotbackup and archive mode with calendar database. (JES 4 2005Q4 with all available patches, 116577-42)
Store daemon exited wit -1 if one of above activated.
Checked Database - ok, 'make' new database with rebuilt - same condition.
Both prozesses are stopping after copy of ics50alarms.db and daemon exited wit -1.
But csbackup will work right.
Any ideas ?
Thanks in advance
Frank

Hello,
we found the reason of this malefunction:
As storedaemon act a perl script - this script unfortunatly do not check the
language but grep some system messages.
So we corrected language settings (system messages) and the storedaemon will run correctly.
Regards
Frank

Similar Messages

Hot back up and archive mode with RMAN

Just diving back into back up world...
I know I can do a hot back up of the Database with no archivelog option not using RMAN.
Just wonder if I can do it with RMAN with no Archivelog option?
TIA

Thanks. Without rman, you can do tablespace online
backup, using start and finish as far as I remember.This is true only if ur database is in ARCHIVELOG MODE. If its not then the only way to back it up is cold backup by either RMAN or without. In short you can do HOT/online backup ONLY if your database is in ARCHIVELOG MODE.
Now what u actually want tell us..
Daljit Singh

RMAN BACKUPS AND ARCHIVED LOG ISSUES

제품 : RMAN
작성날짜 : 2004-02-17
RMAN BACKUPS AND ARCHIVED LOG ISSUES
=====================================
Scenario #1:
1)RMAN이 모든 archived log들을 삭제할 때 실패하는 경우.
database는 두 개의 archive destination에 archive file을 생성한다.
다음과 같은 스크립트를 수행하여 백업후에 archived redo logfile을 삭제한다.
run {
allocate channel c1 type 'sbt_tape';
backup database;
backup archivelog all delete input;
Archived redo logfile 삭제 유무를 확인하기 위해 CROSSCHECK 수행시 다음과
같은 메시지가 발생함.
RMAN> change archivelog all crosscheck;
RMAN-03022: compiling command: change
RMAN-06158: validation succeeded for archived log
RMAN-08514: archivelog filename=
/oracle/arch/dest2/arcr_1_964.arc recid=19 stamp=368726072
2) 원인분석
이 문제는 에러가 아니다. RMAN은 여러 개의 arhive directory중 하나의
directoy안에 있는 archived file들만 삭제한다. 그래서 나머지 directory안의
archived log file들은 삭제되지 않고 남게 되는 것이다.
3) 해결책
RMAN이 강제로 모든 directory안의 archived log file들을 삭제하게 하기 위해서는
여러 개의 채널을 할당하여 각 채널이 각 archive destination안의 archived file을
백업하고 삭제하도록 해야 한다.
이것은 아래와 같이 구현될 수 있다.
run {
allocate channel t1 type 'sbt_tape';
allocate channel t2 type 'sbt_tape';
backup
archivelog like '/oracle/arch/dest1/%' channel t1 delete input
archivelog like '/oracle/arch/dest2/%' channel t2 delete input;
Scenario #2:
1)RMAN이 archived log를 찾을 수 없어 백업이 실패하는 경우.
이 시나리오에서 database를 incremental backup한다고 가정한다.
이 경우 RMAN은 recover시 archived redo log대신에 incremental backup을 사용할
수 있기 때문에 백업 후 모든 archived redo log를 삭제하기 위해 OS utility를 사용한다.
그러나 다음 번 backup시 다음과 같은 Error를 만나게 된다.
RMAN-6089: archive log NAME not found or out of sync with catalog
2) 원인분석
이 문제는 OS 명령을 사용하여 archived log를 삭제하였을 경우 발생한다. 이때 RMAN은
archived log가 삭제되었다는 것을 알지 못한다. RMAN-6089는 RMAN이 OS 명령에 의해
삭제된 archived log가 여전히 존재하다고 생각하고 백업하려고 시도하였을 때 발생하게 된다.
3) 해결책
가장 쉬운 해결책은 archived log를 백업할 때 DELETE INPUT option을 사용하는 것이다.
예를 들면
run {
allocate channel c1 type 'sbt_tape';
backup archivelog all delete input;
두 번째로 가장 쉬운 해결책은 OS utility를 사용하여 archived log를 삭제한 후에
다음과 같은 명령어를 RMAN prompt상에서 수행하는 것이다.
RMAN>allocate channel for maintenance type disk;
RMAN>change archivelog all crosscheck;
Oracle 8.0:
RMAN> change archivelog '/disk/path/archivelog_name' validate;
Oracle 8i:
RMAN> change archivelog all crosscheck ;
Oracle 9i:
RMAN> crosscheck archivelog all ;
catalog의 COMPATIBLE 파라미터가 8.1.5이하로 설정되어 있으면 RMAN은 찾을 수 없는
모든 archived log의 status를 "DELETED" 로 셋팅한다. 만약에 COMPATIBLE이 8.1.6이상으로
설정되어 있으면 RMAN은 Repository에서 record를 삭제한다.

Very strange, I issue following command in RMAN on both primary and standby machine, but it they don't delete the 1_55_758646076.dbf, I find in v$archived_log, this "/home/oracle/app/oracle/dataguard/1_55_758646076.dbf" had already been applied.
RMAN> connect target /
RMAN> CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
old RMAN configuration parameters:
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
new RMAN configuration parameters:
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
new RMAN configuration parameters are successfully stored
RMAN>
----------------------------------------------------------------------------------

Queries related to DMS and Archive link

Hi Experts,
1. Is it possible to link documents in MIGO or FB03 through Archive link with documents already stored via OAWD or CV01N.
2. Can we use any single transaction code for reporting purpose where we can find all the documents stored via DMS and Archive link.
Kind Regards,
Vikas

Hi,
Christoph already answered that question in regard to document info records.
Regarding documents from OAWD, your question is a bit surprising. The main idea of OAWD is to trigger a workflow for linking an external document to a SAP object (document in FB03 or whatever). This is done via ArchiveLink, so all documents linked via OAWD will appear in transactions like MIGO or FB03. Once more, please refer to the documentation:
[Storage Scenarios with Integration of SAP Business Workflow|http://help.sap.com/saphelp_nw73/helpdata/en/4c/f3ee755e21458ae10000000a42189b/frameset.htm]
regards,
Juan

How to create Live and Archive Streaming URLs??

Hello Pros,
I am new to QT Streaming Server, and how it is setup and delivered. Please take it easy on me. Here are my questions.
Our school has been using Helix (Real) Server to deliver some video content via Live/Archive streaming video. The school will be changing a format to QuickTime Streaming server to move away from Real. We would like to deliver MPEG4 file via Live Streaming and archive. We set up QT Streaming Server and we can deliver video now.
How do you create and display URLs on a webpage to share live and archive movies? In RealServer, you can list URLs with live and archive, and RealPlayer opens separately and play movie. The videos are lectures so the website will have list of lecture links as we record every week.
If I click this link, a RealPlayer opens and start playing. Currently, I know that “sdp” file is assigned under RealPlayer. When I changed it to QuickTime Player, the player does not open to play movie. Is there way for me to setup URL to open it in external player? We are not interested in making the movie playable inside webpage. We would like to let viewers have option to stretch the movie player to view larger image if they wish. Strange thing is that when the live movie is played in RealPlayer, the image size is smaller that what we stream (320x240). How is it possible? I am confused…
How about archived streaming URLs? I have seen sites with embedded movie in the webpage, but how do you make links that when a viewer click the URL, it will start QuickTime Player externally instead of open it in new webpage? Is this possible? In RealServer, you can use “ramgen” code in a part of URL to open RealPlayer to play a movie.
Any help will be appreciated it.
Thank you.
Reed
G5, PB 17, Xserver, XSAN Mac OS X (10.4.7)
G5, PB 17, XServe, XSAN Mac OS X (10.4.7)

The Photoshop Forums (mac & PC) can be found here:
Photoshop Windows
Photoshop Macintosh

Diff. between content server and archive server(SARA on content server)

I am very interested about difference between content server and archive server. Is there content server supplied by SAP and archive server by third party producers or something else?
If so dditionally what needs to be done to archive data (via Sara) on content server. I did it on sap R/3 4.0 on an archive server. Is it huge difference to do it on 4.7x2 on content server?

Hey,
The content server is used to save documents,
and SARA (and other third party producers) are used to archive old data.
For example:
You should use Content server - When you need to save un-structured data about worker (e.g: pictures, documents and etc) .
You should use SARA (and other third parties) - When you need to move to archive old
worker which have left your organization before 5 or more years (there for they are not relevant for you)
Here is some more information about Content server
from help.sap.com:
"Therefore, besides the SAP database, an external content server is always available in every SAP system installation. In this way, the necessary technical infrastructure is provided for all document-centric applications and business scenarios that do not require a long-term archiving solution"
Here is some more information about SARA and archiving
from help.sap.com:
"Data Archiving removes from the database application data from closed business transactions that are no longer relevant for the operational business. The archived data is stored in archive files that can be accessed by the system in read-only mode."
for more information:
http://help.sap.com/saphelp_nw70/helpdata/en/8c/e9ddbb5d9a524bbb7854d31b963248/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/73/c335406ee32e34e10000000a155106/frameset.htm

Import performance and archive logs

Well we are working on Oracle 10 R2 on Solaris.
During import (impdp) its generating huge volume of archive logs.
Our database size is in terabytes.
How to stop the archive log generation during import or atleast minimize the generation ??

Hello,
If you can restart your database then you may set your database in NOARCHIVELOG mode.
Then, after the import is finished, you'll have to set back your database in ARCHIVELOG mode (you'll need to restart again the database).
Afterwards, you'll have to Backup your database.
Else, without changing the Archive mode of the database, you can Backup and compress your archived "logs".
For instance, with RMAN:
connect target /
backup
as compressed backupset
device type disk
tag 'BKP_ARCHIVE'
archivelog all not backed up
delete all input;
exit;By that way you'll save space on disk.
Hope this help.
Best regards,
Jean-Valentin

How to attach document to invoice and archive

From trans VF03 I can manually attach document via
System -> Service Object -> Create attachment.
Does anyone know how can I attach the real invoice image (PDF file) to the invoice in back ground mode because I want to attach document to every single invoice.
My final goal is to attach the document to billing document and archive them to an external storage system. Can some one point me to the right direction. Thanks.

Hi
That tools create only an hit in some tables where the path of attach document is stored (not file).
So you should check which are those tables.
Try to see <a href="http://172.24.40.56/saphelp/helpdata/EN/c8/96c998142f11d389940000e8216438/frameset.htm">here</a>
Max

Lost email bodies on Thunderbird: many of my emails in Inbox and Archive are missing.

Some emails disappear from my Inbox and Archives. When I try to do a search for some of those emails, I find the header and the first few words, but not the email body. I have four email accounts on Thunderbird--Fastmail, Wiscmail (University of Wisconsin) and two Google accounts, but it doesn't matter which account is used--all accounts occasionally lose an email. For awhile I tried archiving emails right away but discovered that some would get "disembodied" right away. My archives are not stored online--instead they are stored on my computer. I use Thunderbird version 31.3.0 on Ubuntu Linux 14.04.

I think you have the guts of it. Which is a shame, both for you and for me as I really would like to get hold of a before and after file to see what exactly happens when the file is full. I can guess, but without evidence I just can not get the developers to fix it as no one can say for sure what happens.

My first gen. iPad exits out of apps and safari at random times when I am trying to use them. So I basically can't do anything on it. Is there some way I can fix this?

Crashing apps. What do I do to fix it?
My first gen. iPad exits out of apps and safari at random times when I am trying to use them. So I basically can't do anything on it. Is there some way I can fix this?

I have the same problem. Yahoo Sportacular aborts every time I try to open it. It attempts to load and then the device goes right back to the home screen. The problem started April 26 after I switched leagues from NHL to NBA. Closing all apps and Restarting doesn't solve solve the problem.
All other apps on the iPad work fine. IPad2, OS6.
Any other suggestions? I suppose I could delete the app from the iPad and try re-installing it

Firefox has remberd a password to a website ... chessatwork and I get loged in to my main page and when I click on any link it takes me right back to my log in page, where it has it stored.... password and user name,,, whats up and how do I turn that off?

Firefox has remberd a password to a website ... chessatwork and I get loged in to my main page and when I click on any link it takes me right back to my log in page, where it has it stored.... password and user name,,, whats up and how do I turn that off? chessatwork has ran great for me for many yrs, then one day I down loaded firefox and went to play chess on this site chessatwork.com, well the window popped up asking to remember the log in and pass word and so I said ok, and it did, but now when I click log in and I go to my main page (home) and click on any link, say to play game I return right back to log in

See http://kb.mozillazine.org/Deleting_autocomplete_entries<br />
Remove a saved password here: Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
You may also need to remove the cookies from that website.<br />
* Tools > Options > Privacy > Cookies: "Show Cookies"

Exit for role determination via exit for scheduling agreement and contract?

Hi..
I have a requirement to fetch the agents in run-time for PO,PR,SCHEDULE AGREEMENT, CONTRACT..
For PO i am using EXIT : - M06E0005
For PR release i am using EXIT :- M06B0001
By using above 2 exits i am getting the agents at run-time...
Same way i need the EXIT for SCHEDULE AGREEMENT and CONTRACT..
if there is any EXIT for this please share with me..
Regards,
Imtiaz Khan

Hi Imtiaz,
Ideally you should have your agent determination logic in workflow itself instead of determinining them in EXIT.
Can you tell me why you are determining agents in exit and how you are making use of it ?
Also let us know how your workflows are getting trigger for all these documents.
Regards,
Ibrahim

User exit / BADI for training and event management

Hi all,
Can anybody tell me if there is any user exit / BADI for training and event management module?
Thanks & regards,
LOI

Hi
BADI's for Training and Event Management
HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
HRTEM00NET_ACTIVITY      Determine Activities of an Attendee (e.g. ESS PV8I)
HRTEM00NET_WEBST      Set Cancellation Reason in ESS PV8I
HRTEM_CORR_NOTIF_REQ      Customer Enhancement:Confirmation on Send (R/3 Mail, E-Mail)
HRTEM_HANDLE_BOOKING      HR-TEM BAdI: Employee Leaves Company - Update TEM Data
HRTEM_INT_ZW           HR-TEM: Badi for Integration TEM - Time Management
HRTEM_READ_OBJECT      Customer Enhancement: Name Format
RHPV0001 Customer      Enhancement for Additional Checks for Booking
Enhancemnet Spot:
HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
~~~Ganesh Kumar K.

Capture all SQL statements and archive to file in real time

Want to Capture all SQL statements and archive to file in real time?
Oracle Session Manager is the tool just you need.
Get it at http://www.wangz.net
This tools monitor how connected sessions use database instance resources in real time. You can obtain an overview of session activity sorted by a statistic of your choosing. For any given session, you can then drill down for more detail. You can further customize the information you display by specifying manual or automatic data refresh, the rate of automatic refresh.
In addition to these useful monitoring capabilities, OSM allows you to send LAN pop-up message to users of Oracle sessions.
Features:
--Capture all SQL statement text and archive to files in real time
--Pinpoints problematic database sessions and displays detailed performance and resource consumption data.
--Dynamically list sessions holding locks and other sessions who are waiting for.
--Support to kill several selected sessions
--Send LAN pop-up message to users of Oracle sessions
--Gives hit/miss ratio for library cache,dictionary cache and buffer cache periodically,helps to tune memory
--Export necessary data into file
--Modify the dynamic system parameters on the fly
--Syntax highlight for SQL statements
--An overview of your current connected instance informaiton,such as Version, SGA,License,etc
--Find out object according to File Id and Block Id
Gudu Software
http://www.wangz.net

AnkitV wrote:
Hi All
I have 3 statements and I am writing some thing to a file using UTL_FILE.PUT_LINE after each statement is over. Each statement takes mentioned time to complete.
I am opening file in append mode.
statement1 (takes 2 mins)
UTL_FILE.PUT_LINE
statement2 (takes 5 mins)
UTL_FILE.PUT_LINE
statement3 (takes 10 mins)
UTL_FILE.PUT_LINE
I noticed that I am able to see contents written by UTL_FILE.PUT_LINE only after statement3 is over, not IMMEDIATELY after statement1 and statement2 are done ?
Can anybody tell me if this is correct behavior or am I missing something here ?Calling procedure must terminate before data is actually written to the file.
It is expected & correct behavior.

How can a JVM terminate with an exit code of 141 and no other diagnostics?

Hello,
We are encountering a JVM process that dies with little explanation other than an exit code of 141. No hotspot error file (hs_err_*) or crash dump. To date, the process runs anywhere from 30 minutes to 8 days before the problem occurs. The last application log entry is always the report of a lost SSL connection, the result of an thrown SSLException. (The exception itself is unavailable at this time – the JVM dies before it is logged -- working on that.)
How can a JVM produce an exit code of 141, and nothing else? Can anyone suggest ideas for capturing additional diagnostic information? Any help would be greatly appreciated! Environment and efforts to date are described below.
Thanks,
-KK
Host machine: 8x Xeon server with 256GB memory, RHEL 6 (or RHEL 5.5) 64-bit
Java: Oracle Java SE 7u21 (or 6u26)
java version "1.7.0_21"
Java(TM) SE Runtime Environment (build 1.7.0_21-b11)
Java HotSpot(TM) 64-Bit Server VM (build 23.21-b01, mixed mode)
JVM arguments:
-XX:+UseConcMarkSweepGC
-XX:+CMSIncrementalMode
-XX:+CMSClassUnloadingEnabled
-XX:MaxPermSize=256m
-XX:NewSize=64m
-Xms128m
-Xmx1037959168
-Djava.awt.headless=true
-Djava.security.egd=file:///dev/./urandom
Diagnostics attempted to date:
LD_PRELOAD=libjsig.so.   A modified version of libjsig.so was created to report all signal handler registrations and to report SIGPIPE signals received. (Exit code 141 could be interpreted as 128+SIGPIPE(13).) No JNI libraries are registering any signal handlers, and no SIGPIPE signal is reported by the library for the duration of the JVM run. Calls to ::exit() are also intercepted and reported. No call to exit() is reported.
Inspect /var/log/messages for any indication that the OS killed the process, e.g. via the Out Of Memory (OOM) Killer. Nothing found.
Set ‘ulimit –c unlimited’, in case the default limit of 0 (zero) was preventing a core file from being written. Still no core dump.
‘top’ reports the VIRT size of the process can grow to 20GB or more in a matter of hours, which is unusual compared to other JVM processes. The RES (resident set size) does not grow beyond about 375MB, however, which is an considered normal.
This JVM process creates many short-lived Thread objects by way of a thread pool, averaging 1 thread every 2 seconds, and these objects end up referenced only by a Weak reference.   The CMS collector seems lazy about collecting these, and upwards of 2000 Thread objects have been seen (in heap dumps) held only by Weak references. (The Java heap averages about 100MB, so the collector is not under any pressure.) However, a forced collection (via jconsole) cleans out the Thread objects as expected. Any relationship of this to the VIRT size or the JVM disappearance, however, cannot be established.
The process also uses NIO and direct buffers, and maintains a DirectByteBuffer cache. There is some DirectByteBuffer churn. MBeans report stats like:
Direct buffer pool: allocated=669 (20,824,064 bytes), released=665 (20,725,760), active=4 (98,304) [note: equals 2x 32K buffers and 2x 16K buffers]
java.nio.BufferPool > direct: Count=18, MemoryUsed=1343568, TotalCapacity=1343568
These numbers appear normal and also do not seem to correlate with the VIRT size or the JVM disappearance.

True, but the JNI call would still be reported by the LD_PRELOAD intercept, unless the native code could somehow circumvent that. Using a test similar to GoodbyeWorld (shown below), I verified that the JNI call to exit() is reported. In the failure case, no call to exit() is reported.
Can an OS (or a manual) 'kill' specify an exit code? Where could "141" be coming from?
Thanks,
-K2
=== GoodbyeWorldFromJNI.java ===
package com.attachmate.test;
public class GoodbyeWorldFromJNI
    public static final String LIBRARY_NAME = "goodbye";
    static {
        try {
            System.loadLibrary(LIBRARY_NAME);
        } catch (UnsatisfiedLinkError error) {
            System.err.println("Failed to load " + System.mapLibraryName(LIBRARY_NAME));
    private static native void callExit(int exitCode);
    public static void main(String[] args) {
        callExit(141);
=== goodbye.c ===
#include <stdlib.h>
#include "goodbye.h" // javah generated header file
JNIEXPORT void JNICALL Java_com_attachmate_test_GoodbyeWorldFromJNI_callExit
(JNIEnv *env, jclass theClass, jint exitCode)
    exit(exitCode);
=== script.sh ===
#!/bin/bash -v
uname -a
export PATH=/opt/jre1.7.0_25/bin:$PATH
java -version
pwd
LD_PRELOAD=./lib/linux-amd64/libjsigdebug.so java -classpath classes -Djava.library.path=lib/linux-amd64 com.attachmate.test.GoodbyeWorldFromJNI > stdout.txt
echo $?
tail stdout.txt
=== script output ===
[keithk@keithk-RHEL5-dev goodbyeJNI]$ ./script.sh
#!/bin/bash -v
uname -a
Linux keithk-RHEL5-dev 2.6.18-164.2.1.el5 #1 SMP Mon Sep 21 04:37:42 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
export PATH=/opt/jre1.7.0_25/bin:$PATH
java -version
java version "1.7.0_25"
Java(TM) SE Runtime Environment (build 1.7.0_25-b15)
Java HotSpot(TM) 64-Bit Server VM (build 23.25-b01, mixed mode)
pwd
/tmp/goodbyeJNI
LD_PRELOAD=./lib/linux-amd64/libjsigdebug.so java -classpath classes -Djava.library.path=lib/linux-amd64 com.attachmate.test.GoodbyeWorldFromJNI > stdout.txt
echo $?
141
tail stdout.txt
JSIG: exit(141) called
JSIG: Call stack has 4 frames:
JSIG: ./lib/linux-amd64/libjsigdebug.so [0x2b07dc1bdc2f]
JSIG: ./lib/linux-amd64/libjsigdebug.so(exit+0x29) [0x2b07dc1bea41]
JSIG: /tmp/goodbyeJNI/lib/linux-amd64/libgoodbye.so [0x2aaab3e82547]
JSIG: [0x2aaaab366d8e]
=== ===

Strange: stored exit -1 in hotbackup and archive mode

Similar Messages

Maybe you are looking for