Street Number getting Truncated in BAPI_PO_CREATE and CHANGE
Dear All
For an PO create interface, we are trying to use BAPI_PO_CREATE and BAPI_PO_CHANGE .
The issue is in the structure POADDRDELIVERY. Here we give delivery address of the Purchase Order line item which later gets populated in Delivery address tab in PO item
As per SAP standard STREET filed in this structure will hold 60 characters. When I am testing the Function Module also,(SE37) I am able to enter 60 characters in STREET field. But when the PO is created in SAP through FM processing, the no of characters of STREET field is truncated
Only first 40 characters are populated in PO item. Also after execution of FM , if we see this field in display mode there also only 40 characters are displayed, rest 20 not present .
Why all 60 characters in STREET field in BAPI cannot be passed to Purchase Order ?
Can you please let me know your thoughts
Regards
Shyam
Dear Jurgen
Thanks for the feedback.
Checked along with ABAPer. but unfortunately our SAP release ECC 6.0 702 for which this note cannot be applied.
Please let me know if any other possibilities.
Regards
Shyam
Similar Messages
-
A few questions about my navigation bar, centering, getting rid of margins and changing colours via
I am having a few problems with my navigation bar, could be quite simple fixes but I haven't managed to find an answer yet that works. I am wanting to get rid of the white margins at the top of my page and just below the nav bar and centre the text on the page. I want to get rid of the gradient and turn the background white, black text and a light grey hover background. I have a link here
http://vps3147.inmotionhosting.com/~hannahro/home.html
I tried adding aligning the text in nav and I tried changing float left to center. but this only listed my nav bar contents under each other centered. I tried to change the background colour in nav ul from #efefef to #ffffff. However this made no difference either
Here is the navigation css
@charset "UTF-8";
/* CSS Document */
nav {
margin: 0 auto;
width: 100%;
text-align: center;
nav ul ul {
display: none;
nav ul li:hover > ul {
display: block;
nav ul {
width: 100%;
max-width: 1064px;
background: #efefef;
background: linear-gradient(top, #efefef 0%, #bbbbbb 100%);
background: -moz-linear-gradient(top, #efefef 0%, #bbbbbb 100%);
background: -webkit-linear-gradient(top, #efefef 0%,#bbbbbb 100%);
box-shadow: 0px 0px 9px rgba(0,0,0,0.15);
padding: 0px 60px 0px 60px;
/*border-radius: 10px;*/
list-style: none;
position: relative;
display: inline-table;
nav ul:after {
content: ""; clear: both; display: block;
nav ul li {
float: left;
nav ul li:hover {
background: #4b545f;
background: linear-gradient(top, #4f5964 0%, #5f6975 40%);
background: -moz-linear-gradient(top, #4f5964 0%, #5f6975 40%);
background: -webkit-linear-gradient(top, #4f5964 0%,#5f6975 40%);
nav ul li:hover a {
color: #fff;
nav ul li a {
display: block;
padding: 20px 20px;
color: #757575;
text-decoration: none;
nav ul ul {
width: auto;
background: #5f6975; border-radius: 0px; padding: 0;
position: absolute; top: 100%;
nav ul ul li {
float: none;
border-top: 1px solid #6b727c;
border-bottom: 1px solid #575f6a; position: relative;
nav ul ul li a {
padding: 15px 40px;
color: #fff;
nav ul ul li a:hover {
background: #4b545f;
nav ul ul ul {
position: absolute; left: 100%; top:0;I'm wanting to change the background colour of the nav bar to white, without a gradient,
Change this:
nav ul {
width: 100%;
max-width: 1064px;
background: #efefef;
background: linear-gradient(top, #efefef 0%, #bbbbbb 100%);
background: -moz-linear-gradient(top, #efefef 0%, #bbbbbb 100%);
background: -webkit-linear-gradient(top, #efefef 0%,#bbbbbb 100%);
box-shadow: 0px 0px 9px rgba(0,0,0,0.15);
padding: 0px 60px 0px 60px;
/*border-radius: 10px;*/
list-style: none;
position: relative;
display: inline-table;
To this:
width: 100%;
max-width: 1064px;
background: #FFF;
box-shadow: 0px 0px 9px rgba(0,0,0,0.15);
padding: 0px 60px 0px 60px;
/*border-radius: 10px;*/
list-style: none;
position: relative;
display: inline-table;
And add this:
nav li a {
width:5em; /**ADJUST TOP MENU WIDTH TO FIT**/
text-align:left;
Nancy O. -
I have an old apple id/email that i no longer have access to. So when I'm trying to sync my iphone to my computer/ itunes it's telling me that i will loose songs etc.. if I dont authorize that acct... I have no way to access that account. I have a new acct that I've been using and need to connect them or some how merge them and get rid of the old one. Any help please!!!
Good question. The people who can help update your Apple ID to an accessible email address are atexpresslane.apple.com
After you've navigated there...
Choose iTunes
Choose iTunes Store
Choose Purchases, Billing, ...
Choose topic not listed
In the box that appears type "no longer have access to my Apple ID email address and I need to reset my password. do not know security questions" (this will allow you to schedule a call to resolve the issue)
Click Continue
Click "Schedule a Call"
Someone will contact you to resolve this issue.
In the future, you might using only email addresses that you can access permanently. -
"Get Info" and change permissions
Since I installed Leopard – when I create a file in PhotoShop and save it. When I go to reopen it – it will not let me. I have to go to “Get Info” and change permissions to “read and write” to everybody each time. I also have to from time to time have to go to “Get Info” in application and change permissions to get them to boot. Is there a fix?
Where are you saving these files? When you open an Info Window to the file you just created in Photoshop, what names are listed? The top entry should be your username with Read&Write privs. The middle entry should be either staff, (unknown) or your username with Read Only privs. The last entry should be everyone with Read Only privs.
Also, save a file to your Desktop (name it foo) and see if the problem still happens. If it does, launch Terminal and type:
ls -lde ~/Desktop
ls -le ~/Deskop/foo
paste the spew from that into a reply and we'll try to see whats going on. -
I need to upload edit and change blueprints, what should i get
What should i get to upload edit and change blueprints
Sorry, this question is way too generic. "Edit and change" can mean a million things. what are the blueprints based on? What changes do you need to make?
Mylenium -
Problem accessing child object and changing its appearance (color)
For a program, I need to be able to access a child object (in this case a box) after adding it to a transform group and change its appearance, for example the color of its top face. I have included a small code example to show my problem. The box is the only child I have added to the TransformGroup, but when I call getChild(), it returns a node, and thus I can't then call getShape() to get the top face and change its appearance. What am I doing wrong?
public BranchGroup createSceneGraph() {
BranchGroup objRoot = new BranchGroup();
Transform3D rotate = new Transform3D();
Transform3D tempRotate = new Transform3D();
rotate.rotX(Math.PI/4.0d);
tempRotate.rotY(Math.PI/4.0d);
rotate.mul(tempRotate);
TransformGroup objRotate = new TransformGroup(rotate);
objRoot.addChild(objRotate);
Appearance ap = new Appearance();
Appearance app = new Appearance();
Appearance apr = new Appearance();
ColoringAttributes colr = new ColoringAttributes();
ColoringAttributes colg = new ColoringAttributes();
colr.setColor((float)1, (float)0, (float)0);
ap.setColoringAttributes(colr);
colg.setColor((float)0,(float)1, 0);
apr.setColoringAttributes(colg);
Box box = new Box((float)0.4, (float)0.4, (float)0.4, app);
box.getShape(4).setAppearance(ap);
objRotate.addChild(box);
objRotate.getChild(0).getShape(4).setAppearance(ap);
objRoot.compile();
return objRoot;
}It would help if you gave us the following System information:
Operating System/version
Photoshop version number
Amount of RAM installed
Hard drive(s) capacity
Make and model number of video card
Also try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem. -
My daughter has an iphone and changed her phone number . When u go to text her both phone numbers still show up . How do I get rid of that number in iMessage ??
She needs to deactivate iMessage on her device and the re-activate using the correct number.
-
I recently upgraded and changed from o2 to EE, however although my number has transferred i cannot deactivate my imessage to receive to my transferred number and cannot get messages. To original number? How do i do this.
That's because apps are DRM protected & tied to the account used to originally obtain them. They cannot be transferred to another iTunes account. You can contact iTunes support, explain the situation, and request they add these apps to the download queue of your new account:
http://www.apple.com/support/itunes/contact.html -
How to get the number of page which exists the change bar ?
In FDK development, I want to find the number of page which exists the change bar.
zhaopeng,
You can get the page number by querying the FP_PageNum property of the FO_Page object:
pageNum = F_ApiGetInt(docId, pageId, FP_PageNum);
...or you can use FP_PageNumString if you are using string page numbers.
If you do not have the ID of the FO_Page object, you can get it from the paragraph ID using the following function, courtesy of Rick Quatro, posted to the Yahoo Framedev list. Send the paragraph (FO_Pgf) ID as oObj and it will return the page ID:
F_ObjHandleT GetPage(F_ObjHandleT oDoc, F_ObjHandleT oObj)
F_ObjHandleT oFrame = 0;
IntT iObjType;
F_ObjHandleT oRow, oCell;
while(oObj)
oFrame = oObj;
iObjType = F_ApiGetObjectType(oDoc, oObj);
switch(iObjType){
case FO_SubCol:
oObj = F_ApiGetId(oDoc, oObj, FP_ParentTextFrame);
break;
case FO_Tbl:
oRow = F_ApiGetId(oDoc, oObj, FP_FirstRowInTbl);
oCell = F_ApiGetId(oDoc, oRow, FP_FirstCellInRow);
oObj = oCell;
break;
case FO_Row:
oCell = F_ApiGetId(oDoc, oObj, FP_FirstCellInRow);
oObj = oCell;
break;
case FO_Cell:
// handle FO_Pgf case
case FO_Pgf:
// handle FO_AFrame case
case FO_AFrame:
oObj = F_ApiGetId(oDoc, oObj, FP_InTextFrame);
break;
// handle graphic object cases
case FO_TextLine:
case FO_TextFrame:
case FO_UnanchoredFrame:
case FO_Arc:
case FO_Ellipse:
case FO_Group:
case FO_Inset:
case FO_Line:
case FO_Math:
case FO_Polygon:
case FO_Polyline:
case FO_Rectangle:
case FO_RoundRect:
oObj = F_ApiGetId(oDoc, oObj, FP_FrameParent);
break;
default:
// prevents loop if unknown object type is found.
oObj = 0;
break;
if(oFrame){
// Use FP_PageFramePage to get the page identifier of the object.
return (F_ApiGetId(oDoc, oFrame, FP_PageFramePage));
else
return(0);
Russ -
Change Height of Web Resource to Get Rid Of Blank and Scroll Bar
Hi, I am a junior CRM developer. I'm using CRM online.
I wrote a HTML web resources. In Web Resource Properties, I set the Number of Rows as 20.
But the problem is: If the form window are maximized, there will be blank under web resource; if the form windows become smaller, there will be a scroll bar on the side.
I want get rid of blank and scroll bar, automatically change height according to the size of the window.
I tried checkbox "Automatically expand to use available space", but it didn't work.
I don't think add CSS to my HTML will work, because CSS in HTML will change the html height, not the container in CRM.
Thank you in advance.You most likely have a malware infection. Run and update the following scanners. (Not all programs detect the same infection.)
1. [http://www.safer-networking.org/]
2. [http://www.malwarebytes.org/]
3. [http://www.spywareterminator.com/]
4. [http://www.microsoft.com/security/malwareremove/default.aspx]
If those programs do not do the trick, try to post in the following forum:
1. [http://www.bleepingcomputer.com[
Other spyware removal forums can be found in a search.
Does the issue occur in [[Safe Mode]]? -
MM02 - Enable options change number, change overview and change documents
I am with the following problem: I enter the transaction MM02, I enter the material 1000765, I select the view "Classification". Later I access the environment option from the menu bar and options for change number, change overwiew and change documents are disabled.
How do I enable these options change number, change overview and change documents?
Regards,
Sérgio SalomãHi Sergio,
If we activate the change documents for classification data, then we will be able to see the CHANGE DOCUMENTS for characteristic values through CL20N transaction (CL20N via menu ENVIRONMENT --> Change Documents) or MM02.
For reference please check SAP Note 65124.
For enabling change documents for classification data in SPRO --> Cross-Application Components --> Classification System --> Classes --> Maintain Object Types and Class Types.
In this enter into MARA table entry. Inside that corresponding to the respective CLASS TYPE (say 001) enable the CHANGE DOCS check box in Classifications part (For enabling this please check SAP Note 65124). Then for this CLASS TYPE (say 001) inside the OBJECTS folder, enable the CHANGE DOCS CLASS checkbox also.
Now in MM02 and in CL20N under menu Environment --> Change Documents you can view all the changes done to that characteristic values.
Once the change documents is activated, then we can get the change documents details in CDHDR and CDPOS tables. The OBJECTCLAS may be "CLASSIFY". We can also use the "CLLA_CHANGE_DOC_CLASSIFICATION" function module to fetch the data from these tables.
Hope this helps in solving your issue.
Thanks and Regards,
Harish kumar. -
Getting WLS host url and port number
Hello Experts,
I need to forward an authenticated request to JAAS LoginModule. How can I get wls host name and port numbe in the LoginModule?
Thank you in advance,
Thanks for reading my postHi friends.
I have used the last post, but it is not working.
Mat be the API had changed.
What class or interface could give me this data in web dynpro component?
Too, I'm using the SAP NetWeaver Developer Studio
Version: 2.0.16
Build id: 200602130353
Thank you.
Manuel Loayza
Living La Vida JAVA
Edited by: Manuel Loayza Gahona on Jul 23, 2008 6:54 PM -
Just updated to itunes 12.1.0.71 - big problem - can no longer access the legacy "Get Info" where you could change multiple files, easily add artwork, add album name for TV show, and much more. In previous iTunes 12 you'd right click and hold shift key and be able to get to it. Anyone figured this out?
The "legacy" metadata editors, for which there was a "back door" in iTunes 12.0, have gone from 12.1. However, the revised editors in 12.1 provide access to (almost) all the metadata elements that were available in iTunes 11, albeit in a different layout and with some additional constraints based on media kind. Some users have / will have an issue with the statement that "Get Info has been completely redesigned in iTunes 12 to focus your attention only on what’s necessary for the selected item" since that removes some metadata elements that people may have been using in creative ways. iTunes 12.1 basically gives you access to the fields that Apple think are necessary ... . Some of the things that have been excluded by this rule:
track and disc number fields for video media kinds
show and episode fields for music
description tab for audiobooks made up of more than one file
Obviously the first two examples can be regarded as "overloading" the metadata elements - i.e., using them in ways that the designers didn't intend - but given that some users do find valid cases for this it's a shame that they've been deprecated in the new UI. There are couple of workarounds:
in songs view (or any of the other columnar views), you can still select any fields to display, independent of media kind, and these can be edited (though only one at a time) by double-clicking in the relevant "cell"
you can (temporarily) change the media kind of an item (or group of items) to get access to metadata elements that would otherwise be inaccessible.
It may be worth submitting an issue via https://www.apple.com/feedback/itunesapp.html - I can't see it as a huge development task to have a user preference to switch between "show all fields" and "filter fields based on media kind".
One other oddity/irritation is that some of the tabs don't, by default, show all the available fields - you need to scroll up/down to access them or to expand the window by dragging on one of its corners. Fortunately, the latter seems to be persistent - once you've done this to make all the fields visible the editor will open at the same (larger) size when opened again. -
I am currently on a plan with my parents, but my two years is up and I am due for an upgrade. My plan was to drop from my parents plan and join my fiancee's. Will I be able to get a discounted phone, and keep my existing number?
You'll need to do an Assumption of Liability. The parent that is the account owner and your boyfriend will both have to be at the store to do this. Your line is actually your parents and it will be your fiancee's once the change is made. But you should be able to get your upgrade and you definitely get to keep your number. Also depending on your fiancee's credit history there may be a security deposit required.
-
Does moving and changing e-mail address affect connecting to sever to get updates to CS5 and Lightro
Does moving and changing e-mail address affect connecting to sever to get updates to CS5 and Lightroom? Old address was [Removed personal information], Old e-mail address was [Removed personal information], telephone number was [Removed personal information]. New e-mail address is [Removed personal information], same telephone number, new address is [Removed personal information],
Thank you for your help
Message was edited by: siniousNo. The activation is anonymous as are the updates.
Mylenium
Maybe you are looking for
-
I am moving to Europe - can I bring my Verizon iphone 5 or should I buy a new one there?
Hello, I am moving to Europe, specificaly France, soon and would like to know if I should bring my Verizon iphone 5, or just buy a new one there, since I will have to start a new contract with a European phone company while I am there. I haven't boug
-
No Sound on the internet ( Safari) !!
Everything else plays find but when I'm on the internet all the websites have no sound. Some please help me...
-
How do you take a picture of a PDF file to upload to a resume?
-
Upgrade to application server oc4j 9.0.4
I download the new version package of the application server. Unzip and copy the folder to oc4j_home . The server cannot start up. how to I upgrade 9.03 to 9.04
-
Can I run the old Adobe CS2 software on a new Macbook?
Can I run the old Adobe CS2 software on a new Macbook? I am planning on buying the new white 13" macbook online from apple. Although I have the old CS2 Adobe software. I was wondering if anyone knows if the new macbook is able to run that old softwar