String to hh:mm:ss and Check it

I create a Jdialog that I wish that it could input time of someone entering in my house.
I use jTextField2.getText() to get the String.
How could I check if it is "hh:mm:ss" format?
and would you like to tell me the standard method in Java to deal this kind of problem?
which tutorial I should read?
thank you a lot.

Hi
I suggest to use regular expression:
import java.util.regex.*; // J2SE 1.4
String tt = jTextField2.getText();
// check string against time pattern
boolean valid = tt.matches("^([01][0-9]|2[0-3])(:([0-5][0-9])){2}$");
or read documentation about DateFormat and/or SimpleDateFormat and try to parse string.
Regards.

Similar Messages

  • Where to find CurrencyHelper.java is and check its version

    HI
    where we ca find CurrencyHelper.java is and check its version,

    where we ca find CurrencyHelper.java is
    CurrencyHelper.class can be found under $JAVA_TOP/oracle/apps/fnd/common
    and check its versionAs applmgr user, source the env file and issue:
    $ cd $JAVA_TOP/oracle/apps/fnd/common
    $ strings -a CurrencyHelper.class | grep -i Header
    Or,
    $ cd $JAVA_TOP/oracle/apps/fnd/common
    $ adident Header CurrencyHelper.class

  • Every time I TRY to start firefox 18-19 I get an error message : Firefox has stopped working - close the program and check online for a solution - or - close ..

    Every time I TRY to start firefox 18-19 I get an error message : "Firefox has stopped working" - "close the program and check online for a solution" - or - "close the program" this happens TWICE every time I try to start firefox. Eventually after a random number of tries firefox will start normaly. I am useing firefox 19.0.2 now bit I belive it started when I upgraded to firefox 18 but am not sure, it might have been when I upgraded to firefox 19 ... but it has been happening for a very long time and I cannot find any helpfule solutions online.
    I have tried a Clean reinstall but it did not help.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Every time I TRY to start firefox 18-19 I get an error message : Firefox has stopped working - close the program and check online for a solution - or - close th

    Every time I TRY to start firefox 18-19 I get an error message : "Firefox has stopped working" - "close the program and check online for a solution" - or - "close the program" this happens TWICE every time I try to start firefox. Eventually after a random number of tries firefox will start normaly. I am useing firefox 19.0.2 now bit I belive it started when I upgraded to firefox 18 but am not sure, it might have been when I upgraded to firefox 19 ... but it has been happening for a very long time and I cannot find any helpfule solutions online.

    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!

  • How to log strings stored in Station Globals and/or PreUUT values?

    Hi all,
    I have a Station Global that is persistent across all UUTs in a particular PC. I have also created a custom PreUUT dialog to obtain user input that applies to the upcoming UUT (I pass this user input to the UUT by storing it in a File Global). Both the Station Global and the File Global store a string.
    What is a good way to log these strings into the ATML report and SQL database?
    Currently, the best solution I can think of is:
    Create a LabVIEW VI that takes a string input and passes it straight through to the output
    Pass the Station Global (or the File Global) into the VI input
    Assign the VI output to Step.Result.ReportText
    This seems rather cumbersome though. Is there a simpler way to achieve this? (i.e. is there a built-in TestStand action that logs a variable directly into the report?)
    In case it's important, I'm using TestStand 2013 SP1 and I'm using the default report templates: tr5_horizontal.xsl for ATML, and C:\Program Files\National Instruments\TestStand 2013\Components\Models\TestStandModels\Database\SQL Server Create Generic Recordset Result Tables.sql for SQL.
    Thanks!
    Solved!
    Go to Solution.

    JKSH,
    You can handle this with the Additional Results functionality in TestStand, which can be configured in the settings for an existing step, or as a standalone step type. We have an example of this in the TestStand Fundamental Example series here: http://www.ni.com/product-documentation/52354/en/#toc3   (Look for section 3, "Adding Custom Data to a Report"
    I hope it helps, and let us know if we can do anything else to help!
    Daniel E.
    TestStand Product Support Engineer
    National Instruments

  • Turkish Character and Check Box "?" Problem in XML Publisher

    In aplication and XML Publisher I must use Turkish Characters e.g. 'ş','ı','ğ','ç','ö' and check boxes. In html preview there is no problem, I can see all of them correctly. Hovewer in PDF preview in XML Publisher and also PDF output in Oracle Application all these Turkish Characters and Check Boxes looks like question mark (?). How can I solve this problem ?
    Thanks for helps....

    Hi Tim,
    Related to Special Italian characters, when I try with "Courier New" font with static data,the XML Preview display those characters.But when those chars come from XML source file,they get vanished.I tried two cases:
    Case1 ) IN EBS,I have attached courbi.ttf(font file) to the template manager(followed as per instructions in Font mapping section in User Guide).
    When I try running the report ,its getting completed with Warning.
    Case 2) I have also modified xdo.cfg ( as per Doc ID:400755.1 www.metalink.oracle.com)-
    In both cases ,I am not acheving the desired results.
    Please let me know where I am going wrong.
    Thanks and Regards,
    Kaveri

  • I am using Adobe XI Pro and in various parts of the document there is brown / biege lettering when on the document it shows as black.  My printer guy has been in and checked it out top to bottom and that part is fine.  I have tried to print the same docum

    I am using Adobe XI Pro and in various parts of the document there is brown / biege lettering when on the document it shows as black.  My printer guy has been in and checked it out top to bottom and that part is fine.  I have tried to print the same document and it comes out fine.  Any ideas ?   Using Windows 7 Service Pack 1

    Sorry my bad.  I have tried to print the same document on another printer and all the formatting is fine. 

  • I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection

    I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection

    Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.

  • Items greyed out after upgrading and migrating to Sharepoint 2013 - Open and Check Out + Manage Document Option

    Hi there,
    Following a migration to SharePoint 2013, the follow options have been disabled (Open and Check out + Manage) (see below). These are critically important functions and make it very hard to make SharePoint a useable interface. Any guidance on how to resolve
    these issues is greatly appreciated. This is not a branded website, and there has been no changes made to the standard interface.
    Kind regards
    Jarrad Koppen

    I'm not sure what the easiest way is either.  First, I would try to create a new site collection with a new library and see if you get the same behavior.  If not, then its something in the upgrade process.  If it does that also would point
    to something being wrong in the way that javascript is being executed.
    If it is happening everywhere I suspect you'll have to start tracing javascript using something like IE developer's toolbar to see why the status on those buttons isn't changing when you select a document.  I'm not sure what else to suggest.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • (Cisco Historical Reporting / HRC ) All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054

    Hi All,
    I am getting an error message "All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054"  when trying to log into HRC (This user has the reporting capabilities) . I checked the log files this is what i found out 
    The log file stated that there were ongoing connections of HRC with the CCX  (I am sure there isn't any active login to HRC)
    || When you tried to login the following error was being displayed because the maximum number of connections were reached for the server .  We can see that a total number of 5 connections have been configured . ||
    1: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Current number of connections (5) from historical Clients/Scheduler to 'CRA_DATABASE' database exceeded the maximum number of possible connections (5).Check with your administrator about changing this limit on server (wfengine.properties), however this might impact server performance.
    || Below we can see all 5 connections being used up . ||
    2: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:[DB Connections From Clients (count=5)]|[(#1) 'username'='uccxhrc','hostname'='3SK5FS1.ucsfmedicalcenter.org']|[(#2) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#3) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#4) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#5) 'username'='uccxhrc','hostname'='47BMMM1.ucsfmedicalcenter.org']
    || Once the maximum number of connection was reached it threw an error . ||
    3: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Number of max connection to 'CRA_DATABASE' database was reached! Connection could not be established.
    4: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Database connection to 'CRA_DATABASE' failed due to (All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054.)
    Current exact UCCX Version 9.0.2.11001-24
    Current CUCM Version 8.6.2.23900-10
    Business impact  Not Critical
    Exact error message  All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054
    What is the OS version of the PC you are running  and is it physical machine or virtual machine that is running the HRC client ..
    OS Version Windows 7 Home Premium  64 bit and it’s a physical machine.
    . The Max DB Connections for Report Client Sessions is set to 5 for each servers (There are two servers). The no of HR Sessions is set to 10.
    I wanted to know if there is a way to find the HRC sessions active now and terminate the one or more or all of that sessions from the server end ? 

    We have had this "PRX5" problem with Exchange 2013 since the RTM version.  We recently applied CU3, and it did not correct the problem.  We have seen this problem on every Exchange 2013 we manage.  They are all installations where all roles
    are installed on the same Windows server, and in our case, they are all Windows virtual machines using Windows 2012 Hyper-V.
    We have tried all the "this fixed it for me" solutions regarding DNS, network cards, host file entries and so forth.  None of those "solutions" made any difference whatsoever.  The occurrence of the temporary error PRX5 seems totally random. 
    About 2 out of 20 incoming mail test by Microsoft Connectivity Analyzer fail with this PRX5 error.
    Most people don't ever notice the issue because remote mail servers retry the connection later.  However, telephone voice mail systems that forward voice message files to email, or other such applications such as your scanner, often don't retry and
    simply fail.  Our phone system actually disables all further attempts to send voice mail to a particular user if the PRX5 error is returned when the email is sent by the phone system.
    Is Microsoft totally oblivious to this problem?
    PRX5 is a serious issue that needs an Exchange team resolution, or at least an acknowledgement that the problem actually does exist and has negative consequences for proper mail flow.
    JSB

  • How do I find out what the charges on my credit card are for? Where is the iTunes account to log into and check?

    How do I find out what the charges are on my credit card are for. Where is the iTunes account to sign in and check?

    Launch iTunes then select iTunes Store from the source list left side of the window.
    Click Sign In on the right side of the window just above Quick Links.
    Now click your account name.
    In the next window click See All to the right of Purchase History.

  • AirPlay not showing on iPad anywhere. I've tried ation and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

    AirPlay not showing on iPad anywhere. I've tried all of the rebooting functions and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

    To use AirPlay, you need the following:
    1. iPhone 4s (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)
    2. Apple TV (2nd or 3rd generation)
    3. AirPort Express
    4. Wi-Fi (802.11a/g/n) network
    http://support.apple.com/kb/ht4437

  • My iMessage for my Macbook Air is not working. It says no delivered with a red ! next to it. I have tried serval different options on trying to get it to work to include logging out of iCloud and checking my date and time. I have done about everythin

    My iMessage for my Macbook Air is not working. I have updated everything. My system is running on OS X Yosemite Version 10.10. When I go to send a message, it says no delivered with a next to it. I have tried serval different options on trying to get it to work to include logging out of iCloud and checking my date and time and updating FlashPlayer. I have done about everything I can think of. Any help would be greatly appreciate!

    Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
    I suggest that no response is made to this duplicate thread. 

  • Error Message on the printer - Remove and check right cartridge

    How to fix error message:  "remove and check right cartridge" which you have done numerous times, plus cleaned cartridge nozzle.  Also, I have turned off power to printer, but nothing changed.  Help for HP Officejet 7210 All-in-One needed.
    This question was solved.
    View Solution.

    Funny that multiple people have this problem appear just after 9/1 on multiple printers/all-in-ones. I wonder how many people have this problem and don't report it here. Mine is on a 2710a all-in-one in excellent condition except for this cartridge problem.
    My contacts are not suddenly damaged and it is a relatively new well within the expiration date genuine HP cartridge that we have had for more than a few months. It has not been out of the printer nor has the printer been moved. It sits in a clean room with very little temperature variation from 72 degrees. All printers should be so lucky.
    This is not the first time nor the first printer I've had cartridge problems with HP printers. This is my third one and I'm done with HP printers. I love all other aspects of the printer but this one is infuriating enough to sour me for good.

  • HT1338 when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 70

    when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 709e, connecter wirelessly

    I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
    HP Photosmart Premium Fax All in One - C410a
    I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print.  Since then I've been able to resolve my specific problem.
    I
    1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found), 
    2. grabbed the software/driver update from Aug, 2010,
    3. installed the Aug, 2010 update, and my problems seem to have been fixed.
    This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&...

Maybe you are looking for

  • Why can't I purchase on the app store?

    I have an early 2008 Macbook Pro that I had purchased the Snow Leopard for through the app store. I just paid the 20.00 bucks and downloaded it without any issues. I have now given the computer to my brother and in order to have all of my stuff erase

  • Can I add a second plot to an XY graph without having to re-draw the first?

    Hi, I'm trying to figure out a way to add a second plot (a linear fit between 2 cursors) to an XY graph without having to redraw the first plot (the underlying data). The reason this is important is that the first plot is typically hundreds of thousa

  • What type of sad should I get for my macbook

    I have a 13" MacBook the mid 2009, my HDD is 160 GB, and thinking for the option of SSD,  256GB will be great, but is there any specification that I need to take into consideration before ordering? like connection type and size matching?

  • Don't know how to fix...

    I have a CD stuck in my drive. It keeps making loud buzzing noises when it starts up and will not eject the disc. What should I do?

  • How to Remeove Batch Management in Material Master

    hi! I want to remove the 'Batch management* for a material Made stock as 0 and reversed all its relating documents. but its display error as *The batch management requirement cannot   * be changed for the following reasons: