Stripping digits from a multi digit number

I am writing a VI that will initially prompt an operator to input a whole number as a serial number for the device under test (e.g 13579). I need to take each individual integer and send it as an eight bit word to an EEPROM i.e send 1 = 00000001, then send 3 = 00000011, etc until the whole serial number is stored in the EEPROM. I'm only a simple sparky and just starting life with Labview. Has anyone any ideas how to start this please?
Regards
Ian

hi there
i attached a vi with some functions you may find useful.
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"
Attachments:
ByteConvert.vi ‏24 KB

Similar Messages

I received a $25 iTunes gift card when cashing in my Air Miles points and when removing the label on the back or the card (which had tape over top of it) there is a number missing from the 16 digit number. What do I do?

I received a $ 25 iTunes gift card - when I cashed in some air miles points. Unfortunately the label on the back was covered in tape and when I tried to remove the tape and the label I found that there were only 15 numbers out of the sixteen. How can I find out what the number/letter is that is missing? If I provide you with the GCA # will that help?
Please get back to me,

Consult this handy guide: iTunes Store: Invalid, inactive, or illegible codes

I have a new iPhone 5 and receive the following message when texting some people within my contacts. Message sent using invalid number of digits please resend using 10 digit number or valid short code Msg:2114

I have a new iPhone 5 and receive the following message when texting some people within my contacts. Message sent using invalid number of digits please resend using 10 digit number or valid short code Msg:2114. Online I found a discussion that stated i needed to delete contact and re-add. I have done that to no avail. Any ideas?

I had the same issue with the iPhone 6 and tried everything! I now understand that at some point I stored a number for a contact without including the area code and sent a text message. So, to correct the issue, you must literally "erase" all references to the contact, not just the number. Deleting the contact and entering a new one is not enough because the iPhone stores references to that number in multiple places. The steps below worked and are very simple:
1) On the contact screen, delete everything stored for that number. You can't just edit the contact to fix the problem, so write down or record the info somewhere before you complete this step. Choose edit and then select DELETE to eliminate the entire contact which means home, work, cell, email address, etc.
2) Delete the entire string of messages you sent to that number. That's every single message...
3) Now delete the entire string of invalid 2114 messages you received after your text(s) failed.
4) Finaly, remove the contact from FAVORITES if you saved it that way.
5) To validate that all this worked, simply go to the keypad or contact screen and enter the number associated with the contact to verify successful removal. I used the keypad and dialed to confirm. If the contact number still shows up, you need to go back and recheck your steps. Trust me, I had to do this a few times.
Several posts suggested that you should reset and turn off your phone. After following these steps, it was not necessary for me to reset or turn off my device.
is there a much faster way to achieve the same results? Probably, but this was safe for an iPhone novice and may help you avoid inadvertently deleting other contacts or replacing factory settings that you need.

TS1646 hello I have problem with regist my visa and I cannot buy from store the message came in the end of form is says the phone number must be a 7-digit number and I have writed but not accepted iam from saudi arabia my mobile is 966504850992 pls answe

hello
I have problem with regist my visa and I cannot buy from store
the message came in the end of form is says
the phone number must be a 7-digit number
and I have writed but not accepted
iam from saudi arabia
my mobile is 966504850992
pls answer
thanks
dfr aldossary

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

I have bought elements 13 from amazon and cannot find the serial number anywhere? It appears you needa 24 digit number

I have bought photoshop elements 13 from Amazon and can not find the serial number anywhere? It appears that it needs to be a 24 digit number. Can any one help?

To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
Redemption Code Help
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

Message sent using invalid number of digits. Please resend using 10 digit number or valid short code. Msg 2114

Message sent using invalid number of digits. Please resend using 10 digit number or valid short code. Msg 2114
How can this be fixed? Most of my numbers are saved as 7 digit

So I THINK I've figured this out. Hopefully. I was getting the same problem when I was trying to text my boss and my dad. I went back to try to delete the contact and try again and I noticed that I had the little phone icon next to their numbers and not the messaging text bubble. But I'd also left their type of phone as "home" in the drop down menu. I edited that to mobile and boom, got the text messaging bubble. Tried texting them both, I could now send the message.
I think if the number is set to home the phone assumes it's a landline and doesn't even try to send. I think the people who have had success deleting and re-inserting the contact edited that piece of information without realizing it.
I really hope this solves your problem!

I got an unused Adobe After effects CS6 from an ebay seller.He said the disc was cracked and sent me the 24 digit number key.Do I still need the disc to get the program?And where do i input the 24 digit key?Also do I have to sign up for CC I can't afford

I got an unused Adobe After effects CS6 from an ebay seller.He said the disc was cracked and sent me the 24 digit number key.Do I still need the disc to get the program?And where do i input the 24 digit key?Also do I have to sign up for CC I can't afford that monthly charge.

You can download from the page linked below:
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

How do I stop msging from adding a "1" to a 10 digit number?

How do I stop messaging from adding a 1 to a 10 digit number?

It is clean, I set up the contacts card, and reentered the 10 digit number after the second fail message.
I entered: xxxxxxxxxx and the display on my contact card is (xxx) xxx-xxxx.
Might the carrier-provider be the issue?
Thank-you.
Tschüß
Ray

Living in Japan on an AF base my number is 8 digits, but to sign into Apple store to get APPs etc it's requiring a 7 digit number. any fixes????

my number is 070-xxxx-xxxx...and I cant log into get apps or anything tell i give a 7 digit number...which I dont have. Whats the work around as I have already added my adress, zip APO AP etc etc ????

kickingcloud007 wrote:
my number is 070-xxxx-xxxx...and I cant log into get apps or anything tell i give a 7 digit number...which I dont have. Whats the work around as I have already added my adress, zip APO AP etc etc ????
It sounds as if you are trying to use the US store. Use the Japan store or use the US store with a US based address, credit card and phone number.

What is, how to fix, stop, small popup window from 'plugin-container.exe' with 3 digit number that won't stop re-appearing???

I get very small windows popping up on the screen on top of anything else I'm doing regardless of what apps I'm running or not running. If I R-click on the icon in the task bar, it's identified as "plugin-container.exe"
The window doesn't say why it's there, but only displays a 3 digit number (for example the on on the screen now says 587) and allows only the usual X to close, or an 'OK' button to close. But a short time later it pops up again.
I'm running Windows 7 64bit MS Security Essentials and Firefox, though it will pop up even if I just booted and haven't started Firefox yet.
It's really (really really) annoying. How can I fix it or disable it or whatever it takes to make it STOP.
Perhaps if I had some idea what it was I could attack it that way, but I haven't a clue. BTW, I've cleaned the registry, and done full scan's for virus and turned up nada.
Thanks.
D.

As per the web site:
There will be no update to Waterfox 25.0 as a bug causes Adobe Flash to crash on 64-Bit Windows 7 systems. Bug here. Although Firefox 25.0.1 is now available and we could build it, there would be no point of releasing a new version of Waterfox for only two weeks.
I mostly only use Waterfox and had no problem in the past. I suspect a flash problem may be at the root of my problem however.
As stated, I've performed (full) virus scans with MS Security Essentials. Also with Housecall, and also with HiJackThis. No problems detected.
Screen shot of popup window attached.

Strip Digits

I have a number of 2851 utilizing the IOS gatekeeper. These all point to a 2851 which is acting as a directory gatekeeper. From the directory gatekeeper down our dialing plan is 10 digits in length. We also are part of a bigger organization in which our directory gatekeeper is neighbored/peered to their gatekeeper. In order for someone from the outside organization to dial into us they have a 6 digit prefix they add to the E164. How can I get our directory gatekeeper to strip the 6 digit prefix from the dial string and forward the remaining 10 digits to the appropriate gatekeeper below it?
Thanks for any suggestions/help!
Alan

you can strip digits by using this
voice translation-rule 1
rule 1 /^Number You Want To Strip/ //
then
voice translation-profile voice
translate calling 1
then
translation-profile incoming write this statement in dialpeer .
Regards
Irfan Tariq

Mifi 5510l pop the battery out and on the white barcode label at the bottom right is a 6 digit code. is that 6 digit only for my device or other devices alike ? what is that 6 digit number called ?

what is that 6 digit number called ?

The photo did not attach but I think I can see on my own devices the 6 digit number you are referring to. Both the 4510L and the 4620L have these 6 digit numbers posted near the IMEI number. I would assume that these are batch numbers from the production process and are not unique for each individual device. 6 digits does not give you very many possible models to work with.
While the origins of that specific number are not certain we can confirm for you that the MAC and the IMEI are much more reliable identification numbers to go from. If the MAC and IMEIs from your coworkers photo do not match the MAC and IMEI of the device in your hand then there is nothing to debate. If they do happen to match well then you may have to dig into the problem a little more.
IMEI's are sprint identification numbers. MAC addresses are hardware identifications used on a network. Although IP Addresses can be dynamically assigned to anyone, a MAC address is always going to be unique and the same for a specific device. These two should be entirely unique for each device according to the stickers on the backs of the jetpacks.

Texting problem: Please re-send using a valid 10-digit number

I've been having problems texting ever since I've upgraded to the latest firmware. When I try to text a person from my contacts, I get a text right back from 1 (121)611-611 : Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code.
I KNOW my contacts have 10 digits. I've double and triple checked that. The only way I can text is by going into the text window, open a new text, enter the 10 digit number and then write the message. It goes through fine. It even converts the 10 digit number to my contacts name when I do it like that and it sends.
I also have this issue when I reply to texts! I try to reply but it doesn't go through.
Has anyone experienced this and/or know how to fix this? I've tried a Restore, but it keeps happening.

I'm not sure about your issues with Safari and such.
On GSM-based phones, like the iPhone, you can store and use phone numbers in the international format. eg. +12025551212, +61411123456. That's with the + sign. The network should realise it is in the international format and handle it without a problem. Storing numbers this way allows people to travel to other countries and still make calls to people from the address book and not worry about the local international access code.
Usually SMS messages are received with this form. Try sending an SMS using a number in this form.

Error Invalid Number - 7 digit number prevents future SMS messages

I can't send SMS messages to one of my contacts at all.
my contact had only 7 digits under "Mobile" phone because he was in my area code.
I tried to send a text to him and got this response:
"####### Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code. <my text message>"
The ####### was his 7-digit number from the contact info.
So, I modified the contact info and put in the area code to make it 10-digits. I tried sending another text message, but that had the same exact response (with only 7 digit number).
I cleared the messages for that contact and tried again, same result.
I synch'ed my iPhone and then tried again, same result.
My contact now has the correct 10 digit number, but whenever I try to send a SMS message to him I get the response with the 7-digit number saying Error Invalid Number.
How can I fix this?

Apparently the phone is wrongly remembering the shorter number, so try this. Edit the contact to put back the 7 digit number, but add a NEW phone number with the 10 digit code, and a different label, perhaps a custom label. Try sending an SMS to that new number. If it works, you can just delete the old 7 digit number entry entirely.

HT4972 My phone is not responding since I downloaded the IOS update 7, I am locked out of using my iPhone, I enter my 4 digit number and a screen appears saying Joining "Sherry's Wi-Fi Network" but nothing else is happening and I can't use me phone.

An update from Apple appeared on my iPhone so I downloaded it, it was an IOS update. The screen said to swipe to open, then enter a 4 digit number, which I did then it went to a screen asking for my network info which I entered (except I guessed at the security as being "WPA2", I have not idea, I entered my password and now the only screen that will appear is one stating it is Joining my stated Network??? but nothing is happening and I can't use any of my iPhone features at all? Help

Go back to the previous page. If there's no available wireless networks listed except "Other" which is manually putting the wireless network information, see if you have "activate using cellular" or "connect to iTunes" option.

Stripping digits from a multi digit number

Similar Messages

Maybe you are looking for