Structure Value used to ZPGM

HI,
i_RM08M-VORGANG this Field value used for Standard MIRO Transaction Event.
This Same Value Used to User exit for LMR1M001 Function For EXIT_SAPLMRMP_010.
How is used this Field Value.
Plz, Advise me.
By,
Jeevan.S

Hi,
if you want to get the value of RM08M-VORGANG in the user-exit, you can get it via
field-symbols.
e.g.
    CONSTANTS: c_vorgang(23) TYPE c VALUE '(SAPLMR1M)RM08M-VORGANG'.
    FIELD-SYMBOLS: <fs_vorgang> TYPE ANY.
    ASSIGN (c_vorgang) TO <fs_vorgang>.
    CASE <fs_vorgang>.
    WHEN '1'.
    .......etc
    ENDCASE.
Best regards.

Similar Messages

How to get STPOV structure values using BOM number and Plant number

hello All,
could you please help me out
'How to get STPOV structure values using BOM number and Plant number'
is there any function module where can i give input as bom and plant number .
waiting for your response.
regards
srinivas

I did a quick where-used lookup in SE11 on the structure STPOV in function module interfaces and came up with the following:
Function Module                             Short Description
CK_F_TOTALCOST_COMPUTE
CS_ALT_SELECT_COUPLED_PRODUCT
CS_WHERE_USED_CLA                Bills of material; class use
CS_WHERE_USED_CLA_ANY        Bills of material; direct class use or via other class
CS_WHERE_USED_CLA_VIA_CLA        Bills of material; class use via classes
CS_WHERE_USED_COP
CS_WHERE_USED_DOC                Bills of material; document use
CS_WHERE_USED_DOC_ANY:Bills of material; direct and (indirectly) document use via
CS_WHERE_USED_DOC_VIA_CLA        Bills of material; document use via classes
CS_WHERE_USED_KNO                Bills of material; use object dependency
CS_WHERE_USED_MAT                Bills of material; where-used list
CS_WHERE_USED_MAT_ANY:Bills of material; where-used list as article or class item
CS_WHERE_USED_MAT_VIA_CLA        Bills of material; where-used list via classes
EXIT_SAPMC29M_001                BOM; Article Where-Used List
It appears that this structure is primarily used for where-used look-ups for components within the BOM. I don't know if any of these are what you're in need of.
Hope this helps,
Mark Schwendinger

Inserting values using merge

Hi everyone,
I need help with inserting values using merge.
* I need to check all the units in a parent category. For example, NF_ARTICLECATEGORYID = 7462 is a parent category.
* Im going to compare all the units in the parent category(7642) to the units in a subcategory (8053).
* If the units in parent category(7642) is not present in the subcategory(8053) then the units will be inserted in the same table.
table structure:
Table name : ARTICLECATEGORYACCESS
Fields: IP_ARTICLECATEGORYACCESSID
NF_ARTICLECATEGORYID
NF_UNITID
NF_USERID
N_VIEW
N_EDIT
Sample data:
CREATE TABLE articlecategoryaccess (
IP_ARTICLECATEGORYACCESSID NUMBER(5),
NF_ARTICLECATEGORYID NUMBER (10),
NF_UNITID NUMBER (10),
NF_USERID NUMBER (10)
N_VIEW INT,
N_EDIT INT);
INSERT INTO articlecategoryaccess VALUES (255583, 7642, 29727, NULL, 1 ,1);
INSERT INTO articlecategoryaccess VALUES (243977,7642,29728, NULL, 1 ,1);
INSERT INTO articlecategoryaccess VALUES (240770,7642,29843, NULL, 1 ,1);
INSERT INTO articlecategoryaccess VALUES (243413,7642,29844, NULL, 1 ,1);
INSERT INTO articlecategoryaccess VALUES (274828,7642,44849, NULL, 1 ,1);
INSERT INTO articlecategoryaccess VALUES (274828,8053,44849, NULL, 1 ,1);
Units ID 29727, 29728, 29843, 29844, 44849 has access to parent category 7642.
The units id 29727, 29728, 29843, 29844 dont have access to subcategory 8053.
29727, 29728, 29843, 29844 should be inserted in the same table and will have an access to 8053.
After they are inserted, it should look like this
IP_ARTICLECATEGORYACCESSID     NF_ARTICLECATEGORYID     NF_UNITID NF_USERID N_VIEW N_EDIT
255583     7642     29727 null 1 1
243977     7642     29728 null 1 1
240770     7642     29843 null 1 1
243413     7642     29844 null 1 1
274828     7642     44849 null 1 1
new value     8053     44849 null 1 1
new value     8053     29843 null 1 1
new value     8053     29844 null 1 1
new value     8053     29728 null 1 1
new value     8053     29727 null 1 1
NOTE: IP_ARTICLECATEGORYACCESSID is a sequence and it should be unique
DECLARE
BEGIN
MERGE INTO articlecategoryaccess b
USING (SELECT *
FROM articlecategoryaccess c
WHERE nf_articlecategoryid = 7642
MINUS
SELECT *
FROM articlecategoryaccess c
WHERE nf_articlecategoryid = 8053) e
ON (1 = 2)
WHEN NOT MATCHED THEN
INSERT (b.ip_articlecategoryaccessid, b.nf_articlecategoryid, b.nf_unitid, b.NF_USERID, b.N_VIEW, b.N_EDIT)
VALUES (articlecategoryaccessid_seq.nextval, 8053, e.nf_unitid, null, 1, 1);
END;
i got an error after running the script:
*Cause:    An UPDATE or INSERT statement attempted to insert a duplicate key.
For Trusted Oracle configured in DBMS MAC mode, you may see
this message if a duplicate entry exists at a different level.
*Action:   Either remove the unique restriction or do not insert the key.
why would it be duplicated? its a sequence and its unique.. I dont know, maybe there is something wrong my script..
Any help is appreciated..
Ed

Ed,
1. What is the current value of the Sequence? Does the current value of sequence exist in the table? If yes, then increment the sequence to a value that is not present in the Table.
2. Do you have any unique constraint on any of the columns that you are inserting?
I have to ask you again, Why are you insisting on Merge statement when a simple Insert can do the job for you? Don't you feel that the below specified Merge statement is making things look more Complicated than they actually are, do you?
Think on it and then proceed. I hope these pointers help you to resolve the issue.
Regards,
P.

Printing Nested Structure values

Hi
i have two structures and i want to print those values using c#.. I have parent structure which has 5 properties on it and inside that having another child structure which refers 5 properties on it. so now i want to print the values for both structure
?Can you help me out ?

You should use classes instead of structures. Here is one method
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
namespace ConsoleApplication1
class Program
static void Main(string[] args)
test t = new test();
Console.WriteLine(t.Print());
public class test
int a;
int b;
test2 c;
public string Print()
string results = "";
results = string.Join(",", new string[] { "a = " + a.ToString() + ", ", "b = " + b.ToString() + ", ", c.Print() });
return results;
public class test2
int d;
int e;
public string Print()
string results = "";
results = string.Join(",", new string[] { "d = " + d.ToString() + ", ", "e = " + e.ToString() + ", " });
return results;

How to display structure value

hi
i want to disply structure value should be come as column in alvgrid.
now i am getting structure value in grid as row.
for example now getting
article no
color
size
but i want to display this above in grid like
article no color size
thanks .

READ - EACH READ WILL GET ONE RECORD FROM THE DATASET. IN BINARY MODE IT READS THE LENGTH OF THE FIELD AND IN TEXT MODE IT READS EACH LINE.
READ DATASET <FILE NAME> INTO <FIELD>.
then use
FOR DOWNLOADING, USE GUI_DOWNLOAD RATHER THAN WS_DOWNLOAD.
<b>
Please reward if useful...</b>

Which data structure to use in this scenario? queue, stack, list, ...

Hi,
I'm hesitant about what data structure to use (best efficient one) in the following scenario
At a given moment I have an ordered set of data such as:
(1,3,6,9,10)
and a current value (by instance, 11)
Then I need to access the LAST one (10) and
If my value is greater I will add it to the list. In this example I will add 11 so the list will be (1,3,6,9,10,11)
On the other hand, as a second step, I will iterate on the list as follows: I will get the first element, do something, then remove it, and go to next one until the list is empty. Therefore, basically I will access always the first element on the list.
I don't really care about the elements in the middle.
Which data structure do you suggest me to use?
I was thinking on Queue (easy to access the head, and extract one by one in order), but I don't know how to get the tail element (10 in this case), as it is the one that tells me if I have to add another element...
Thank you.

>
At a given moment I have an ordered set of data such as:
(1,3,6,9,10)
and a current value (by instance, 11)
Then I need to access the LAST one (10) and
If my value is greater I will add it to the list. In this example I will add 11 so the list will be (1,3,6,9,10,11)Any data structure will do, I would suggest a LinkedList.
On the other hand, as a second step, I will iterate on the list as follows: I will get the first element, do something, then remove it, and go to next one until the list is empty. Therefore, basically I will access always the first element on the list.Use an iterator and the corresponding remove methods.
Mel

Return all the column values using the F4IF_INT_TABLE_VALUE_REQUEST

Hi,
How to return all the column values using the F4IF_INT_TABLE_VALUE_REQUEST?
For example : if the row has 3 columns then after selecting the particular row, the RETURN_TAB internal table should contain all the three column values.
Regards,
Raghu

Hi,
   Try the following...
DATA : it_fields like help_value occurs 1 with header line.
data: begin of w_vbap,
        vbeln      like vbap-vbeln,
        posnr      like vbap-posnr,
        werks      like vbap-werks,
      end of w_vbap.
data: i_vbap   like w_vbap   occurs 0 with header line,
         w_fields type help_value,
      i_dfies type table of dfies,
      i_return_tab type table of ddshretval with header line,
      i_field type dfies.
select vbeln posnr werks
      from vbap into table i_vbap up to 5 rows.
if sy-subrc = 0.
   sort i_vbap by vbeln.
endif.
clear it_fields[] , it_fields.
it_fields-tabname = c_vbap.
it_fields-fieldname = 'VBELN'.
it_fields-selectflag = c_on.
append it_fields.
it_fields-tabname = c_vbap.
it_fields-fieldname = 'POSNR'.
it_fields-selectflag = space.
append it_fields.
it_fields-tabname = c_vbap.
it_fields-fieldname = 'WERKS'.
it_fields-selectflag = space.
append it_fields.
loop at it_fields into w_fields.
    i_field-tabname   = w_fields-tabname.
    i_field-fieldname = w_fields-fieldname.
    i_field-keyflag   = w_fields-selectflag.
    append i_field to i_dfies.
endloop.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
      retfield               = 'VBELN'
     window_title           = 'Select'
    tables
      value_tab              = i_vbap
      field_tab                = i_dfies
      return_tab             = i_return_tab
   exceptions
     parameter_error        = 1
     no_values_found        = 2
     others                 = 3
read table i_return_tab into w_return_tab index 1.
if sy-subrc = 0.
endif.
Regards,
Srini.

How to get multiple values using HttpSession.getAttribute(java.lang.String)

Hey Guys
I'm trying to find a way to get multiple values using the following method
HttpSession.getAttribute(java.lang.String)
Here's the scenerio. Its a already written application and now i'm trying to make some changes. earlier in the jsp page a combo box was used and value was retrieved in the servlet using the getAttribute method of Session. Now I'm using a html multiple selection list and have to retrieve all the values selected in the list in the servlet. Can anyone please suggest me how to do that. HTTPRequest class has a method getParameterValues which will let me do that but i have to do is using HTTPSession.
Thanks for your time to read this

I'm not sure what you are trying to do. You can only use session.getAttribute to retrieve something that has already been stored in the session with a previous setAttribute. If you need to store multiple values under one attribute name using setAttribute, you can store an array, or an ArrayList or whatever type of Collection you want. The request.getParameterValues method is the only way you can retrieve form parameters than can have multiple values. If the servlet hasn't already processed these parameters and put them into the session for you, you have to use request.getParameterValues.

Tables and structures are used in a standard scripts

how to find which tables and structures are used in a standard scripts?
pls explain step by step process...
Edited by: abap on Jun 21, 2008 4:36 PM

Go to Transaction SE80, Select Program and paste that program name below..
Then drop down the tree of that program...then you will find option " Dict. Structures"..
Here you can find the tables which has been you for that transaction / program.
Regards,
Santosh

How to find bpel instance in 11g based on the index values using Java APIs

Hi ,
In SOA10G we had option to find the instances based on the index value using Java APIs like below.
WhereCondition criteria= new WhereCondition(SQLDefs.CX_index_1 + " = ?");
criteria.setString(1, "indexValue");
Locator mLoc = getLocator();
IInstanceHandle[] foundInstances = mLoc.listInstancesByIndex(criteria);
Please tell me how to achieve the same functionality in SOA 11G using Java APIs
Regards,
Saba

I have multiple bpel in my composite. I checked in ci_indexes table and it shows the instance number of the bpel process. But the em console is showing only the composite instance number. when I opened composite instance, I could see all the bpel process with instance number in the audit trail. How can I find the the actual composite instance number that I should search for in the em console ???

How to pass multiple query string values using the same parameter in Query String (URL) Filter Web Part

Hi,
I want to pass multiple query string values using the same parameter in Query String (URL) Filter Web Part like mentioned below:
http://server/pages/Default.aspx?Title=Arup&Title=Ratan
But it always return those items whose "Title" value is "Arup". It is not returned any items whose "Title" is "Ratan".
I have followed the
http://office.microsoft.com/en-us/sharepointserver/HA102509991033.aspx#1
Please suggest me.
Thanks | Arup
THanks! Arup R(MCTS)
SucCeSS DoEs NOT MatTer.

Hi DH, sorry for not being clear.
It works when I create the connection from that web part that you want to be connected with the Query String Filter Web part. So let's say you created a web part page. Then you could connect a parameterized Excel Workbook to an Excel Web Access Web Part
(or a Performance Point Dashboard etc.) and you insert it into your page and add
a Query String Filter Web Part . Then you can connect them by editing the Query String Filter Web Part but also by editing the Excel Web Access Web Part. And only when I created from the latter it worked
with multiple values for one parameter. If you have any more questions let me know. See you, Ingo

Unable to populate the default value using form personalization

Hi, I need to default a value in order managemnt for waybill number
shipping -- transaction - delivery - detail --
In Order management
Shipping - Transactions
Source system -- Order management
From Order number - Any ordernumber
say find
I want to default this Detail ( xxxxx) as Way bill
value of :DLVB.DETAIL_LABEL
I have put the following condition on form personalization
Condition tab
Triger event
When new record instance
Trigger object
dlvy_s
Processing mode both
Actions tab
Property
Object type Item
Target Object DLVY_S.WAYBILL
Property name Value
Value
:DLVB.DETAIL_LABEL
but it is not defaulting... Appreciate if any one has idea what is wrong in this.
Edited by: 885022 on Oct 3, 2011 11:31 AM
Edited by: 885022 on Oct 3, 2011 11:33 AM

yes Srini
as we dont have any option via personalization to set the default values ,it can be done through controller extension ,
in processRequest method of extended controllere get the control for that particular field where u want to set the default value and set the value using fieldbean.setValue(pagecontext,value);
in case of any particular case ,please post in the forum
thanx
Pratap

How to find out that particular structure is used in which tables

Hello Friends,
Most of the times through techinal information we come to know the table name for a particular field.And in se16 when i give that table name than system says its structure and not the table.So in se11 when i give that structure name in database table field, its shows all the field in that structure, but not the data stored in that field.
So my question is how to find out that particular structure is used in which tables,so that i can view data stored in that structure?
Thanking you guys in advance.
Regards,
Jitendra

Dear,
When you click on the technical information it will give the structure name and field, double click on the structure and it will take you the display structure screen, there you will have the where-used List icon (Ctrl + Shift + F3) at the top , click on that and it will show the options, select Database tables and execute, it will give the tables related to the structure, you can explore the list of tables and find where your required field is stored in them.
Thanks & Regards,
Vijaya Bhaskar A

Unable to get values within scope of the RowGroup(only got values using Previous and current scope value)

Hi All,
I already calculated a row(Add Total row) like Gross profit within Group1 (a,b,c,d,e which are sub groups) using Previous and current scope column group values. ex: Gross Profit = a - b. (within group1)
Gross Profit = Previous(Sum(Fields!Trans_amount.Value)) - Sum(Fields!Trans_amount.Value) in Group1
Now, I want to get values for Net income like Net income = a - b - c in Group1. (OR)
Net income = Gross Profit - c in Group1 (Using Gross Profit textbox values using Reportitems!textbox.value). but, values different. Since Expression got new calculation)
Please help me.
Thanks Advance.
- Prem Kumar T D http://www.sharepointbasic.com/

Hi Premtd,
As per my understanding, there are group and subgroups in the report, you added total to a group with the expresson: Previous(Sum(Fields!Trans_amount.Value)) - Sum(Fields!Trans_amount.Value). You want to add a text box to the report to calculate Net income
with the expression: Previous(Sum(Fields!Trans_amount.Value)) - Sum(Fields!Trans_amount.Value) - Sum(Fields!Trans_amount.Value). In order to improve the efficiency of troubleshooting, I need to ask several questions:
• “I already calculated a row(Add Total row) like Gross profit within Group1 (a,b,c,d,e which are sub groups)” What’s the meaning of Group1 and subgroup a, b, c, d, e ? Could you please mark Gross profit and the groups in the screenshot?
• How to calculate Net income? Please provide some more detailed information of your requirements. I would be appreciated it if you could provide sample data and clear screenshot of the report.
This may be a lot of information to ask for at one time. However, by collecting this information now, it will help us move more quickly toward a solution.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

In BAPI's why the structures are used in table parameters?

Hello sir,
what is BAPI sir? In BAPI's why the structures are used in table parameters? table parameters they are using structures but not using any customized tables ?
regards
rachu.

Hello Rachu
BAPIs provide RFC-enabled interfaces to SAP business objects (e.g. like customer, sales order, purchase order, etc.).
A BAPI does basically the same like you would need to do calling the corresponding transaction (e.g. BAPI_SALESORDER_CREATE -> VA01).
Since they are RFC-enabled they can be called from external systems.
BAPIs represent an external interface for the outside world. Very often you will find within the BAPI that there is a mapping done to the (SAP-)internal structures at the beginning of the coding and vice versa at the end of the coding. Thus, you will (almost) never find any DB table name used as type of a BAPI TABLES parameter.
Regards
Uwe

Structure Value used to ZPGM

Similar Messages

Maybe you are looking for