Struts and Tiles Problem:compiler error message

I imported the application "tiles-documentation.war" from jakarta-struts-1.1 into the newly installed JDevloper(Version 9.0.5.2 Build 1618) and try to make it running.
While with the former Jdeveloper 9.0.4 I can run it nicely(a few manual editing of some files, though), with this newer version I just can not proceed with the following error message.
Project: D:\jdev\mywork\oc4j_startup\tiles_doc\tiles_doc.jpr
D:\jakarta-struts-1.1\webapps\tiles-documentation\tutorial\common\menu.jsp
Error: package and class have same name: tutorial.common._menu
the same kind of message repeated many many times.
It seems that I can not probe any more...
Can someone help me out? Thanks in advance

Right so these where messages from the JSP compile or from the import process?

Similar Messages

I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

Hello AKCamus
To give you some ideas of what to do next, I have provided a few articles that will give some troubleshooting Wi-Fi connections and recommended Wi-Fi settings.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem-.thanks

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks

If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

Same issue here, previously did work perfectly

I am trying to download iTunes and am getting an error message: "MobileMe Services encountered a problem and need to be closed"

I am trying to download iTunes and am getting an error message: "MobileMe Services encountered a problem and need to be closed"

Hello dananbar,
Thank you for the details of the issue you are experiencing when installing iTunes. I recommend following the steps in the article below when getting an error message trying to install iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

Am trying to update to 5.0 from 4.2.1 and keep getting an error message "There was a problem downloading for iphone. The network timed out. What do I do ?

Am trying to update to 5.0 from 4.2.1 and keep getting an error message "There was a problem downloading for iphone. The network timed out. What do I do ?

This is asked and answered many times each day. The forum search bar is on the right side of this page.
Disable your firewall/security software and try again.

Compiler Error Message: BC30451: Name 'UserEmail' is not declared.

Have the message when I test the page. Anyone sugest a
solution please?
Compiler Error Message: BC30451: Name 'UserEmail' is not
declared.
Page code below.
<%@ Page Language="VB" ContentType="text/html"
ResponseEncoding="iso-8859-1" %>
<%@ Register TagPrefix="MM" Namespace="DreamweaverCtrls"
Assembly="DreamweaverCtrls,version=1.0.0.0,publicKeyToken=836f606ede05d46a,culture=neutra l"
%>
<MM:DataSet
id="dsUsers"
runat="Server"
IsStoredProcedure="false"
ConnectionString='<%#
System.Configuration.ConfigurationSettings.AppSettings("MM_CONNECTION_STRING_conSQLPerene lle")
%>'
DatabaseType='<%#
System.Configuration.ConfigurationSettings.AppSettings("MM_CONNECTION_DATABASETYPE_conSQL Perenelle")
%>'
CommandText='<%# "SELECT dbo.Users.UserEmail,
dbo.Users.UserPassword FROM dbo.Users WHERE
dbo.Users.UserEmail=@UserEmail AND
dbo.Users.UserPassword=@UserPassword" %>'
Expression='<%# IsPostBack %>'
Debug="true"
><Parameters>
<Parameter Name="@UserEmail" Value='<%#
IIf((Request.Form("UserEmail") <> Nothing),
Request.Form("UserEmail"), "") %>' Type="NVarChar" />
<Parameter Name="@UserPassword" Value='<%#
IIf((Request.Form("UserPassword") <> Nothing),
Request.Form("UserPassword"), "") %>' Type="NVarChar" />
</Parameters></MM:DataSet>
<MM:PageBind runat="server" PostBackBind="true" />
<script language="VB" runat="server">
Protected Sub Page_Load(ByVal Src As Object, ByVal E As
EventArgs)
' Don't cache this page.
Response.Expires = -1
Response.AddHeader("Pragma", "no-cache")
Response.AddHeader("cache-control", "no-store")
' Check user credentials entered on the page
If (UserEmail.Value =
dsUsers.FieldValue("UserEmail",Nothing))
&&(UserPassword.Value =
dsUsers.FieldValue("UserPassword",Nothing)) Then
' The user has been authenticated.
' 1. Create the authentication ticket.
' 2. Redirect to the appropriate page.
' 1. Create the authentication ticket.
' Create and use the forms authentication ticket.
FormsAuthenticationTicket ticket = New
FormsAuthenticationTicket(1,
Request.Form("UserEmail"),
DateTime.Now, ' issue time
DateTime.Now.AddMinutes(30), ' expires in 30 minutes
False, ' not persistent
Dim ' role assignment gets stored in the UserData As
"Users")
' Create a new (encrypted) HttpCookie using the ticket just
created
' and name it accordingly to the value specified in the
<forms> element
' in the web.config file.
Dim cookie As HttpCookie = New
HttpCookie(FormsAuthentication.FormsCookieName,FormsAuthentication.Encrypt(ticket))
' Add the cookie to the outbound response.
Response.Cookies.Add(cookie)
' Redirect as appropriate.
Dim ReturnUrl As String
If Request.QueryString("ReturnURL") Is Nothing Then
ReturnUrl = "/client-area/index.aspx"
Else
ReturnUrl = Request.QueryString("ReturnURL")
End If
Response.Redirect(ReturnUrl)
Else
Msg.Text = "Invalid Credentials: Please try again"
End If
End Sub
</script>

Answered myself. JUst named the imput fields incorrectly.
Couple of other problems also but sorted and now working
fine...

Compiler Error Message: CS0433

Compiler Error Message: CS0433: The type 'CrystalDecisions.Web.CrystalReportPartsViewer' exists in both 'c:\WINDOWS\assembly\GAC_MSIL\CrystalDecisions.Web\11.5.3700.0__692fbea5521e1304\CrystalDecisions.Web.dll' and 'c:\WINDOWS\assembly\GAC_MSIL\CrystalDecisions.Web\10.2.3600.0__692fbea5521e1304\CrystalDecisions.Web.dll'
Support Information:
Windows Server 2003
Crystal 9,10 and 11 support required based on reports and web configuration.
This error relates to the following configuration:
Visual Studio 2005
Crystal .Net that comes with VS2005 SP2 (10.2.3600.0)
Web application deployment.
I am told that some Web.Config settings would fix this, but no one has been to specific.
Thanks
-Jonathan

Been over those files many times today actually. Thanks for the suggestion though. Apparently this type of issue is a known issue when you have multiple DLL's in the assembly cache with regards to how Crystal is laid out.
My Web.Config has no refference to either assembly, the project reference only refferences 10.2.3600.0 DLL's, Specific Version is set to true on all of them. The only way around this problem from what I have read is to use some sort of Web.Config adjustment, and the only article that even slightly goes into this is:
http://blogs.gotdotnet.com/richarde/archive/2005/09/02/468187.aspx
As you can see by that article, Microsoft is not only aware of this problem, but have had to do work arounds in the Web.Config themself to get around it. The problem is, I do not know the xmlns to use for Crystal, the depenentAssembly information, or even the assemblyIdentity to use in this case.
What I need is the <runtime> variables for atleast version 10.2.3600.0 and 11.5.3700.0 along with 11.5.3300.0, some of my reports are directly created inside of VS 2005 C# .Net and need to be displayed in a web project, others are created in VS 2003 and used in an application layer and those are fine, but finally, I have Crystal XI R2 reports (several people creating these) which are displayed on a web page via <assemblies> tags within those sub project websites.
The sticker at the moment is the VS2005 C# projects. I would LOVE to just shove a package at VS 2005 to force it to upgrade from 10.2.3600.0 to 11.5.3700.0, then it wouldn't matter as much, but Microsoft won't support me, they consider this a Business Objects issue. What I am looking for is the Web.Config <runtime> setttings.
<runtime>
   <assemblyBinding xmlns="????">
        <dependentAssembly>
             <assemblyIdentity name="???" publicKeyToken="???" />
             <bindingRedirect oldVersion="??" newVersion="??" />
        </dependentAssembly>
   </assemblyBinding>
</runtime>
One for me to get past this issue.. Or some sort of upgrade to VS 2005 to bring it up to Crystal XI R2 package level, or some direction there of.

I run mac os 10.4.11 and firefox 7 will not open, and I get an error message saying firefox is not supported on this version of mac os. is there a different version I can download? Am I missing something?

firefox used to work no problem, I updated firefox a few month ago, now firefox will not open and I get the error message as above

As of Firefox 4.0 and newer one needs both OSX 10.5+ and a Intel Mac.
The last version to work on a Intel Mac using OSX 10.4.* is Firefox 3.6.*
http://www.mozilla.org/en-US/firefox/all-older.html
http://www.mozilla.org/en-US/firefox/7.0/system-requirements/
http://www.mozilla.org/en-US/firefox/4.0/system-requirements/
http://www.mozilla.org/en-US/firefox/3.6/system-requirements/

I just purchased survivor season 11 to watch on my iphone4. I synced the first 4 episodes and I get an error message that episode 2 can not be played in my iphone4? How do I get it to play on my iPhone 4?

I just purchased survivor season 11 to watch on my iphone4. I synced the first 4 episodes and I get an error message that episode 2 can not be played in my iphone4? How do I get it to play on my iPhone 4?

In order to use ''nxm://'' links, Nexus Mod Manager must be installed and associated with the ''nxm'' protocol.
* http://www.nexusmods.com/skyrim/mods/modmanager/
In case of problems with this third-party program, please refer to its support forum:
* http://forums.nexusmods.com/index.php?/forum/1413-nmm-code-development-chat

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, Mark

Unfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

I just downloaded Itunes 11.1.4 (64-bit) and am running Windows 7, Itunes will not open and I get an error message about Microsoft runtime and I get an error R6034 and 1114 which says Itunes was installed incorrectly. Can anyone help?

I just downloaded Itunes 11.1.4 (64-bit) update and am running Windows 7. Itunes will not run after installing this update and I receive an error message R6034 on Loading Microsoft C Runtime Library incorrectly. Also Error message 1114 the Itunes Installer was installed incorrectly. Is there an new update for this problem? Is anyone else having this problem? Please help. Thanks.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99425)

Firefox crashes when I try to attach a file. Seems related to second problem, receive error messages when opening a pdf in adobe (which I've reinstalled twice)

Crash report:
bp-74bcae4f-7091-4121-a809-5d0a12140616 is the crash report.
I have a Toshiba.
When I open my email (gmail, school email) and try to attach a file, firefox immediately crashes and gives me two error messages. first one is a WerFault, i think. I don't know if that's relevant.
Apart from these crashes in Firefox, I am also having the same problem when trying to view or open a pdf in adobe reader, or even open adobe reader itself. It won't try to open, I just receive the error messages. I've uninstalled and reinstalled it two times now. I did this thing suggested online where you go into the control panel and look at all your plugins. Then, "repair" adobe reader - pretty sure it's just a button that says repair. that didn't do anything, of course I also could have done something wrong.
I realize this could be a problem unrelated to Firefox, but I'm doing what I can before I take my laptop in.
Please save me.

Ok two things based on the crash report and the steps you took right before the crash:
# Try to disable scrolling acceleration and restart Firefox. Does it continue to crash?
# Try Safe Mode and do the same task as above with email and the pdf [[Troubleshoot Firefox issues using Safe Mode]]
# Also pdf.js may be helpful to read pdfs in the meantime. You can change the default reader in the Preferences/Options > Application menu of Firefox.
# Try to clear out the downloads folder and update flash to version 14 (that should do it)
IF it crashes again please also provide the new crash signatures and we can take a look :-) Sorry for the crashing :-(

I am trying to download itunes and keep getting an error message cannot access network location %appdata%

I am trying to download itunes to windows 7 and keep getting the error message "cannot access network location $APPDATA%\." I have contacted an Apple advisor and was not able to resolve the problem. What to do?

Since this a problem pertaining to the iTunes application, you might have better luck posting this in the iTunes forum.
https://discussions.apple.com/community/itunes
B-rock

Struts and Tiles Problem:compiler error message

Similar Messages

Maybe you are looking for