Studio 2 can create/see remote servers but not in remote deployment

In Sun Studio Creator 2, I can create and see my remote servers but when I try to remote deploy my web app from "Deploy to Remote Server", my remote servers do not show up on the list (Only Add Remote Server is there).
On my laptop with the same version of SSC, this is not a problem (I can see the remote servers in the deployment list) so I suspect that the problem is just on my desktop machine. The remote server settings are the same on both machines.
I have tried reinstalling SSC with no success. If anyone has run into this or have any suggestions on how to fix this, I would appreciate it.
-Rick

Further update looking through the Creator log I found that I was getting the following error message below. Would a 503 error indicate an out of resource condition in my Sun Web Server?
java.io.IOException: Server returned HTTP response code: 503 for URL: http://myserver:8888/https-admserv/bin/status
at sun.reflect.GeneratedConstructorAccessor131.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at sun.net.www.protocol.http.HttpURLConnection$6.run(HttpURLConnection.java:1202)
at java.security.AccessController.doPrivileged(Native Method)
at sun.net.www.protocol.http.HttpURLConnection.getChainedException(HttpURLConnection.java:1196)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:885)
at org.netbeans.modules.j2ee.sun.ws61.ManagerImpl.syncRun(ManagerImpl.java:1509)
at org.netbeans.modules.j2ee.sun.ws61.ManagerImpl.getTargets(ManagerImpl.java:198)
at org.netbeans.modules.j2ee.sun.ws61.SunWebDeploymentManager.getTargets(SunWebDeploymentManager.java:274)
at org.netbeans.modules.j2ee.deployment.impl.ServerInstance.getTargetMap(ServerInstance.java:398)
at org.netbeans.modules.j2ee.deployment.impl.ServerInstance.getTargets(ServerInstance.java:356)
at org.netbeans.modules.j2ee.deployment.impl.ServerInstance.initCoTarget(ServerInstance.java:1277)
at org.netbeans.modules.j2ee.deployment.impl.ServerInstance.refresh(ServerInstance.java:293)
at org.netbeans.modules.j2ee.deployment.impl.ServerInstance.isRunningWithinMillis(ServerInstance.java:494)
at org.netbeans.modules.j2ee.deployment.impl.ServerInstance.isRunning(ServerInstance.java:484)
at org.netbeans.modules.j2ee.deployment.impl.ui.InstanceNode$2.run(InstanceNode.java:86)
at org.openide.util.Task.run(Task.java:189)
at org.openide.util.RequestProcessor$Task.run(RequestProcessor.java:330)
at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:721)
Caused by: java.io.IOException: Server returned HTTP response code: 503 for URL: http://myserver:8888/https-admserv/bin/status
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1149)
at java.net.HttpURLConnection.getResponseCode(HttpURLConnection.java:367)
at org.netbeans.modules.j2ee.sun.ws61.ManagerImpl.syncRun(ManagerImpl.java:1492)

Similar Messages

¿Dear Sirs, I can create with "Photoshop Elements 12", a PDF file of several pages?. I can create a "pdf" file, but not of several pages. Thank you

¿Dear Sirs,
I can create with "Photoshop Elements 12", a PDF file of several pages?.
I can create a "pdf" file, but not of several pages.
Thank you
Valentín Uriarte

This is the Photoshop Elements forum.
If you are using Acrobat, ask Here:
Acrobat

I previously owned an iPad. I want to restore my iBook collection from my iPad to my Macbook. I can only see my collections but not the books. How can I restore it from my iPad backup?

I prevsiouly owned an Ipad. Before selling it, I backup it on my Macbook. When the new Mavericks has been released, i upgraded my Mac. Now that I have iBooks on my Mac, I want to restore my iBook collection from my previous Ipad to my Mac. On my Mac, I can only see the iBooks collection of my previous iPad but not the books that I have purchased. I probably had more than a hundred books on my collection (in epub and pdf formats). I have already tried transferring purchases in iTunes and adding to my Library but to no avail.
Can anyone give me a solution to this.

Restore as a NEW device to test. If this solves it, that means there is some corruption in your backup file, or maybe it's one of your apps causing the trouble. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.

HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>

It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.

Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.

Bonjour - Mac A can see Mac B but not vice versa

Hi
Very odd behaviour with Bonjour. Up until yesterday, my macbook pro (call it A) would see my mac pro (B) - it would appear automatically in A's sidebar, I could listen to B's iTunes library on A and so on. No problem and there hasn't been for a couple of years. B could not see A - but I didn't really need it to and this wasn't an issue.
Suddenly, this morning, the situation is completely reversed. A can no longer see B at all, but B can see A.
I can connect both ways by using 'Connect', I can ping both ways, but I can't get A to discover B using Bonjour.
The only think I've done that I can think can have caused the changes is to use Omnifocus sync (with B holding the sync server) - it worked fine all day, but overnight Bonjour seems to have reversed itself as described above.
Bonjour Browser shows me that B can see A, but A can't see B. I have identical settings on both machines for sharing, network, firewall (all everything).
Bizarrely, for one two minute period a couple of hours ago, the situation reversed itself (A could see B but not vice versa), but then immediately went back to B can see A, but not vice versa.
Both computers are running the same version of Leopard (10.5.7). I've reinstalled the OS on B, just to see, but this hasn't improved matters.
I can find nothing on google or this discussions forum to explain this bizarre behaviour - most support threads seem to peter out without being resolved. Has anyone any idea what's going on please? I'm quite happy getting stuck into the command line, if that's needed.
Many thanks
David

The Macbook Pro is connected wirelessly to the router, the Mac Pro connects to the same router by ethernet.
As far as I'm aware, I'd made no changes to any of the setups (computers or router) before the problem occurred: bonjour worked fine, but in one direction only (the MBP could see the Mac Pro, but not vice versa). Now, the Mac Pro can see the MBP, but not vice versa - and this is a problem because my printer and itunes server both sit on the Mac Pro.
I've set all the firewall and security settings I could find to transparent access - and (except for the obvious difference between the wired and wireless links), the setups are identical on both computers.
By the way, I can connect to the Mac Pro easily enough and transfer files, I just can't see it via bonjour or use Screen Sharing (again the settings haven't changed since they were working!)
Many thanks
David
Many thanks
David

I have just downloaded itunes to my new laptop. I can see purchased music but not all my cds - do i needto reload them?

I have just downloaded itunes to my new laptop. I can see purchased music but not all my cds - do i need to reload them?

See Empty/corrupt iTunes library after upgrade/crash.
tt2

Document library: user can see the metadata but not the file itself

Hello,
For a specific document library certain users will have the right to see the metadata but not the file itself. The only solution I can think of is using a http handler. But I don't know if I can get the user that requests the document.
Are there any other approaches to this requirement?
Can I get the username of the user that makes that request?
I guess that http handler is deployed at the Web application level - am I right?
Thank you
Christos

Nicolas, thank you for your answer.
I think this this is not a strong protection. Everybody can istall sp designer or go through UNC path, like \\myserver\documentlibray or \\myserver\lists\mylist and see the documents- and we use unc paths a lot. I don't want to get into trouble when a (wiki)
leak is made.
Christos

HT5361 suddenly I cannot see my gmail in my inbox on my macbook. I deleted the gmail account and added it back but I cannot see new gmail in my inbox. I can see sent gmail but not incoming gmail. The gmail is visible if I go to my google account on goo

Suddenly I cannot see my gmail in my inbox on my macbook. I tested it and I can see my gmail in google. I deleted my gmail account on my macbook mail and re-added it and still cannot see incoming gmail. I can see new icloud e-mail. I have both a gmail account and an icloud account. For my test e-mail in gmail, I can see sent gmail but not incoming gmail. How do I fix this?

Try rebuilding the mailbox. This can take awhile if you have a lot of mail.
Rebuild mailbox
Try re-indexing the mailbox. This can take awhile if you have a lot of mail.
Reindex messages
What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
Troubleshooting sending and receiving email messages

My Ipod Nano (6th gen.) has gone white but I can barely still see the icons but not letters, what do I do?

My Ipod Nano (6th gen.) has gone white but I can barely still see the icons but not letters, what do I do?

Bring it to an Apple Store. That happened to my iPhone as well before it died. My nano wouldn't turn on so I brought it to an apple store and they gave me a new one

Creating an OSB cluster but not with Configuration Wizard

Hi experts,
I would like to create an OSB cluster but not with Configuration Wizard. So my scenario for creating OSB cluster is:
- create an AdminServer with Configuration Wizard
- log into Administration Console and create two machines and a cluster
- start node managers
- configuration for starting servers automatically with node managers
After these steps I have a cluster with 2 managed servers which will start with the node manager. However these managed servers are appropriate for deploying normal Java applications but not OSB components...
My questions is what should I do with these managed servers to be able to deploy OSB components onto them?
Or can I create an OSB domain only with Configuration Wizard?
Thanks,
V.
Edited by: RickFlair on May 13, 2012 1:10 PM

Hi Pierluigi,
Thanks for the answer!
When I created the domain (with Configuration Wizard) I could set that the domain should be an OSB domain so I think I don't need this template afterwards.
If I create an OSB domain (with Configuration Wizard) with one AdminServer in it and later I add managed servers on the admin console then I get this message on the OSB Administration Console: Unable to obtain metrics data from the server. It means that something is wrong with the managed servers I can't use them properly.
However if I create an AdminServer and managed servers with Configuration Wizard then I don't get this error (or warning?) message.
Could you help me why it is?
Thanks,
V.

I have recently deleted several old backups from a portable usb drive (formated NTFS-3g(MacFUSE). The macmini can´t see it anymore but my imac does?

I have recently deleted several old backups from a portable usb drive (formated NTFS-3g(MacFUSE). The macmini can´t see it anymore but my imac does? The usb ports of the mac mini can still see my other drives formated with FAT32.

Thanks, it is working now, after I have installed NTFS3G.
I did not format the drive. I was using it as purchased to do backups for a while. After the corporate backup system was working correctly again I was using the disk at home for my homevideos. Since the corporate backup was running correctly for ten days in a row, I have decided to delete those backupfiles on the usb drive. Each backup was a folder consisting of almost 30GB data, mirroring the servers harddrive which is running on windows xp. After I have deleted those folders, only the video files remaind and I could not open the drive on the macmini anymore.

I had a repair done at the apple store where the replaced my hard drive and copied my other hard drive over to the new one. Everything is fine except the time machine wont reconnect to my old file and is trying create a new file but not enough space?

I had a repair done at the apple store where the replaced my hard drive and copied my other hard drive over to the new one. Everything is fine except the time machine wont reconnect to my old file and is trying create a new file but not there is not enough space for both files files? Do I need to do something to have it continue to update my old file instead of recreating a new one?

Depending on what version of OSX you're running, and how the data was transferred, you may be out of luck.
If you're running Lion, and your backups were made to a directly-connected external HD (ie, not a Time Capsule or other network location), you may be able to get Time Machine to "associate" the new disk with the old backups. See #B6 in Time Machine - Troubleshooting, especially the pink box there.
If you're running Snow Leopard, you might be able to do a full system restore of your backups to the new HD. See Time Machine - Frequently Asked Question #14 for detailed instructions. That should leave a "trail" that Time Machine can follow to "associate" the new drive with the old backups. Unfortunately, that doesn't always work, and there's no way to do it manually, as there is with Lion.

Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all?? Looks like I can set it for one but not others. All, one, or nothing

Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all?? Looks like I can set it for one but not others. All, one, or nothing

Hey Eric,
Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
Again, thanks for trying, it is appreciated.

Why can I sync a movie but not TV shows on my nano (7th gen)?

I am using iTunes 11.0 and can sync a movie (Miracle on 34th Street) to my new ipod nano 7th gen but when I try a TV Show (a Planet Earth HD episode) or even a brief video clip taken with my camara I am told that such an action is not permitted on this ipod. So why can I sync a movie but not TV shows on my nano (7th gen)? Thank you.

Before you can sync video files, it must be converted into a format compatible with ipod. If you can’t sync a video convert it by doing the following:
In iTunes, select the video you want to convert. Do one of the following then sync again after:
1) Choose File > Create New Version > Create iPod or iPhone Version.
2) Choose File > Create New Version > Create iPad or Apple TV Version.
I hope this works.

Studio 2 can create/see remote servers but not in remote deployment

Similar Messages

Maybe you are looking for