Sub Query or Use Result of Query on OLAP BW Universe ?

Dear All,
Could you use in Webi report :
1 ) Sub Query ? I activate the option with Designer but button is still in grey...
2 ) Result of query on filter panel ? The button is still in grey
Regards
Cédric

Hi ,
I do it before my initial post... without success.
I already use Sub Query in relational database, but with OLAP BW universe, I can't use actually...
I am searching info, solution,...
Thanks
Cédric

Similar Messages

Query Performance and Result Set Query/Sub-Query

Hi,
I have an infoset with as many as 15 joins with different ODS and Master Data..The ODS are quite huge with 20 million, 160 million records)...Its taking a lot of time even for a few days and need to get atleast 3 months data in a reasonable amount of time....
Could anyone please tell me whether Sub-Query or Result Set Query have to be written against the same InfoProvider (Cube, Infoset, etc)...or they can be used in queries
on different infoprovider...
Please suggest...Thanks in Advance.
Regards
Anil

Hi Bhanu,
Needed some help defining the Precalculated Value Set as I wasnt succesful....
Please suggest answers if possible for the questions below
1) Can I use Filter Criteria for restricting the value set for the characteristic when I Define a Query on an ODS. When i tried this it gave me errors as below ..
"System error in program CL_RSR_REQUEST and form EXECUTE_VTABLE:COB_PRO_GET_ALWAYS.... Error when filling value set DELIVERY..
Job cancelled after system exception ERROR_MESSAGE"
2) Can I create a create a Value Set predefined on an Infoset - Not Succesful as Infoset have names such as "InfosetName_F000232" and cannot find the characteristic in Paramter Tab for Value Set in Reprting Agent.
3) How does the precalculated value Set variable help if I am not using any Filtering Criteria and is storing the List of all values for the Variable from the ODS which consists of 20 millio records.
Thanks for your help.
Kind Regards
Anil

Spatial Query that uses Result of another Spatial Query

Hi all,
I am using the SDO_DIFFERENCE Operator to return the difference between a query window and an intersection geometry. This is fine and i get an object back that is cast to a STRUCT using the SDO API. I want then to use this (returned)object in another SQL query that uses the SDO_RELATE Operator. The problem is that i dont know what type it needs to be so that the SDO_RELATE operator will accept it as a valid argument. Has anyone done this before or seen anything like it? Any help will be very much appreciated.
Keith.

Thanks for your help,
I have done the following steps, but i still dont understand why it doesnt work.
CREATE TABLE val_results (sdo_rowid ROWID, result varchar2(1000));
CALL SDO_GEOM.VALIDATE_LAYER_WITH_CONTEXT('SHAPES','SHAPE','VAL_RESULTS');
SELECT * FROM val_results;
1 null Rows Processed <3>
2 AAARDDAAEAAAAA+AAA 13348 [Element <1>] [Ring <1>]
3 AAARDDAAEAAAAA+AAB 13367 [Element <1>] [Ring <1>]
SELECT shape_id,SDO_GEOM.VALIDATE_GEOMETRY_WITH_CONTEXT(c.shape, 0.005)
FROM shapes c;
3 TRUE
2 13348 [Element <1>] [Ring <1>]
1 13367 [Element <1>] [Ring <1>]
If my rectangle and polygon is still invalid, can someone tell me why they are invalid. And how can i make them valid?
Thanks.
UPDATE:
I have solved Polygon issue.
In Spatial Developer's Guide it says:
Simple polygon whose vertices are connected by straight line
segments. You must specify a point for each vertex; and the
last point specified must be exactly the same point as the first
(within the tolerance value), to close the polygon. For
example, for a 4-sided polygon, specify 5 points, with point 5
the same as point 1.
I have added a point to polygon which is same as first point. Now, it can find the point in polygon.
INSERT INTO shapes VALUES (4, 'Polygon', SDO_GEOMETRY(2003, NULL, NULL, SDO_ELEM_INFO_ARRAY(1,1003,1), SDO_ORDINATE_ARRAY(306,193,130,441,489,653,88,183,442,354,306,193)));
But, when i run this query again:
SELECT shape_id,SDO_GEOM.VALIDATE_GEOMETRY_WITH_CONTEXT(c.shape, 0.005) FROM shapes c;
4 13349 [Element <1>] [Ring <1>][Edge <4>][Edge <1>]
3 TRUE
2 13348 [Element <1>] [Ring <1>]
1 13367 [Element <1>] [Ring <1>]
it doesn't say TRUE like it did for Circle ??
Edited by: WhiteScars on Jan 4, 2010 12:45 AM

Errors with querying a query table using non-QoQ query and QoQ query

HELP ! ! ! Going into testing soon. I need this to work to get correct report results ! ! ! !
My issue seems similar to the one just answered about Query of Queries RunTime Error
and the reply from lawhite01 caught my eye.
This is a 2 parter. The second part is the QoQ part, but the 1st part has a line in the query that is similar to the QoQ one and it uses the same data. Part 1 also throws an error.
PART # 1.
I'm trying to use a query table created through QueryNew and then query it.
I need multiple columns in the query table I create:
<cfscript>
 tot_AllCurrentDraftListing = QueryNew("AnnounceNum, JP_PDLoc, JP_JS_Title, JP_JS, JP_KW_1, JP_JobTitle, JP_Open, JP_Close, JP_CloseType, JP_CloseName, JP_PosNeed, JP_DirectHire, JP_Desc, JP_Draft, JP_Archived, JP_State, JP_AreaName, JP_AreaID, JP_AreaAlias, JP_Fac_SU, JP_Fac_Facility, JP_FAC_ID, JP_Grade1, JP_sal_low1, JP_sal_high1, JP_Grade2, JP_sal_low2, JP_sal_high2, JP_Grade3, JP_sal_low3, JP_sal_high3, JP_Grade4, JP_sal_low4, JP_sal_high4, JP_Grade5, JP_sal_low5, JP_sal_high5, JP_Posted, JP_TypeHire, JP_HRemail");
 </cfscript>
Then I populate all the cells of the query table.
Then I set up to use the created query table.
I do this first:
 <cfquery name="qAltPostID" datasource="#at_datasource#">
 SELECT AltPoster, fk_Job_AnnounceNum
 from JOB_JPContacts
 Where AltJPContactType = 'AltPosterID'
 and AltPoster = '#session.IHSUID#'
 </cfquery>
Then, in my first query using the created query, I expect to need to choose from multiple values, so I'm using this line in the query (this is NOT a QoQ query):
 and AnnounceNum IN (<cfqueryparam cfsqltype="CF_SQL_varchar" value="#ValueList(qAltPostID.fk_Job_AnnounceNum)#">)
I've also tried:
 and AnnounceNum IN (#ValueList(qAltPostID.fk_Job_AnnounceNum)#)
and:
 and JOB_AnnounceNum IN
 SELECT fk_Job_AnnounceNum
 from JOB_JPContacts
 Where AltJPContactType = 'AltPosterID'
 and AltPoster = '#session.IHSUID#'
ERROR is: one record should return. I get 0.
PART # 2: Here's the QoQ part.
I get the error:
Query Of Queries runtime error.
Comparison exception while executing IN.
Unsupported Type Comparison Exception: The IN operator does not support comparison between the following types:
Left hand side expression type = "LONG".
Right hand side expression type = "STRING".
A tutorial I found gave an example using only one column for this part of the fix:
 tot_AllCurrentDraftListing = QueryNew("AnnounceNum", "CF_SQL_VARCHAR")
How would I set up the query with the datatype when I'm using multiple columns:
<cfscript>
 tot_AllCurrentDraftListing = QueryNew("AnnounceNum, JP_PDLoc, JP_JS_Title, JP_JS, JP_KW_1, JP_JobTitle, JP_Open, JP_Close, JP_CloseType, JP_CloseName, JP_PosNeed, JP_DirectHire, JP_Desc, JP_Draft, JP_Archived, JP_State, JP_AreaName, JP_AreaID, JP_AreaAlias, JP_Fac_SU, JP_Fac_Facility, JP_FAC_ID, JP_Grade1, JP_sal_low1, JP_sal_high1, JP_Grade2, JP_sal_low2, JP_sal_high2, JP_Grade3, JP_sal_low3, JP_sal_high3, JP_Grade4, JP_sal_low4, JP_sal_high4, JP_Grade5, JP_sal_low5, JP_sal_high5, JP_Posted, JP_TypeHire, JP_HRemail");
 </cfscript>
I used this code after all the cells contained values and before running my QoQ query:
 <cfloop index="intID" from="1" to="#tot_AllCurrentDraftListing.recordcount#" step="1">
 <cfset tot_AllCurrentDraftListing["AnnounceNum"] [intID] = JavaCast("string", intID) />
 </cfloop>
 Is that correct?
Thanks.
Whoever can help me with this should be awarded extra points ! ! ! !

 and AnnounceNum IN (<cfqueryparam cfsqltype="CF_SQL_varchar" value="#ValueList(qAltPostID.fk_Job_AnnounceNum)#">)
If you're passing a list as a param, you need to tell <cfqueryparam> it's a list. Read:
http://livedocs.adobe.com/coldfusion/8/htmldocs/Tags_p-q_18.html#1102474
ERROR is: one record should return. I get 0.
It's a bit hard to comment on this sort of thing without knowing the data involved.
A tutorial I found gave an example using only one column for this part of the fix: tot_AllCurrentDraftListing = QueryNew("AnnounceNum", "CF_SQL_VARCHAR")
How would I set up the query with the datatype when I'm using multiple columns:
Again, this is a matter of reading the relevant docs:
http://livedocs.adobe.com/coldfusion/8/htmldocs/functions_m-r_19.html#292759
As a general rule, if you're having trouble with the syntax of a CFML statement, look it up in the docs.
Adam

How to design a query without using Net Weaver Query Designer

Does anyone know if any alternative way to design an query without using Net weaver GUI? in order to reduce the time consuming, I am wondering if there have any method which can define/modify a stack of cells, characteristics and structures without work through the GUI.
Deeply thank for any of your advices.

Can you give an example?
Just from what you write, I would assume that you talk about something like a mass-property-changer. As far as I know the BEx this is not really possible, but what I do normally is building one query and then either using query-views (saving more or less the navigation state) or by copying and changing the properties of the few characteristics and key figures.
But without a specific example it's difficult to exactly understand what you exactly need.
Mario

How to update multiple tables using results from query

I'm a bit rusty on this stuff and am hoping for some help.
Table 1 is:
location_id, location_name
Table 2 is
location_id, employee_id and misc. other columns
Then there are multiple tables with associated data, keys being location_id and employee_id.
There are no established relationships.
Trying to come up with a process to change location_id for all employees assigned to a particular location.
It seems to me that the basics are
select employee_id from Table2 where location_id='xxxxxx'
Then take each employee_id returned and change their location_id in each of the other tables
I'm not clear on how to load the returned employee id's as variables and then loop through them.
Thanks

Thanks for the welcome. I'll read up on the rules now.
Below is the DDL for a couple of the tables.
Version = 11g
I would query the users table for all users with a certain site_id and then use them to update the site_id in the users table (and other tables)
-- DDL for Table USERS
CREATE TABLE "USERS"
(     "USERID" VARCHAR2(8 BYTE),
     "PASSWORD" VARCHAR2(50 BYTE),
     "FIRST_NAME" VARCHAR2(50 BYTE),
     "LAST_NAME" VARCHAR2(50 BYTE),
     "SITE_ID" VARCHAR2(5 BYTE),
     "ROLE_ID" VARCHAR2(1 BYTE)
) SEGMENT CREATION IMMEDIATE
PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE "SITES_DATA_TS"
CACHE ;
-- DDL for Table EMPLOYEE_PROFILE
CREATE TABLE "EMPLOYEE_PROFILE"
(     "EMPLOYEEID" VARCHAR2(9 BYTE),
     "PROGRAM" NUMBER,
     "REQUIREMENT" NUMBER,
     "JOBNUM" VARCHAR2(50 BYTE),
     "STATUS" VARCHAR2(50 BYTE),
     "PROGRAM_TYPE" VARCHAR2(50 BYTE),
     "SITE_ID" VARCHAR2(5 BYTE),
     "NUM_QUAL_TEST_ATTEMPTS" NUMBER(7,0)
) SEGMENT CREATION IMMEDIATE
PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE "SITES_DATA_TS"
CACHE ;

SSIS query returns no results - same query in SQL management studio works

Hello,
I'm running a very simple join to get a result set:
SELECT dbo.sap_contracts.svc_id, dbo.sap_contracts.svc_code, dbo.sap_contracts.quantity, dbo.sap_contracts.start_date, dbo.sap_contracts.end_date
FROM dbo.sap_contracts
INNER JOIN dbo.contracts
ON dbo.contracts.contract_id=dbo.sap_contracts.contract_id
where customer_name='XXXXXXXXX'
When I run this in SQL management studio it works fine and returns the list of existing "SAP contracts" in the DB (to compare to the customer's contracts actually in SAP).
In SSIS (SQL 2012) I'm using an Execute SQL task to run this query and putting the full results set into a variable of type "object". I've done very similar things before and it worked fine. With this query in SSIS I get no results at all. Changing
the variable type to "string" throws an error showing that the type being written to the variable is "DBNull" - so it seems that the query in SSIS returns no records, when in SQL management studio I get the 15 records that should be returned.
Does anyone have any ideas of what could be wrong?
Cheers
Mark

There are several connections to the DB in tasks before this one, and the task after this is a whole load of C# in a script task doing SOAP communications to the SAP ERP system to compare the result set from this SQL with the contracts in SAP ERP for the
specific customer.
Input variables are all correct (I've checked them about 15 times now with breakpoints on just about every task in the whole package) and I'm at the point of having to test everything in an attempt to see exactly what query is being sent to the SQL server
and anything else I can do to see why nothing comes back. There is a almost complete lack of debugging tools in SSIS which doesn't make life any easier (something I've heard quite a few times in various forums).
I'm tearing my hair out on this for half a day now and it's not funny any more, so apologies if I come across as a little frustrated.
Cheers
Mark

How can I use a single query panel with two view criteria?

Hi all,
I have a requirement to allow users to change the "display mode" on a search results tree table for an advanced search page. What this will do is change the structure of how the data is laid out. In one case the tree table is 3 levels deep, in the other case it's only 2 with different data being at the root node.
What I've done so far:
1) I exposed the data relationship for these two ways of viewing the data in the application module's data model.
2) I created a view criteria in the two view objects that are at the root of the relationships, where (for simplicity sake) I'm only comparing a single field.
This is in one view object:
<ViewCriteria
 Name="PartsVOCriteria"
 ViewObjectName="gov.nasa.jpl.ocio.qars.model.views.PartsVO"
 Conjunction="AND">
 <Properties>... </Properties>
 <ViewCriteriaRow
 Name="vcrow23"
 UpperColumns="1">
 <ViewCriteriaItem
 Name="PartDiscrepantItemsWithIRVO"
 ViewAttribute="PartDiscrepantItemsWithIRVO"
 Operator="EXISTS"
 Conjunction="AND"
 IsNestedCriteria="true"
 Required="Optional">
 <ViewCriteria
 Name="PartDiscrepantItemsWithIRVONestedCriteria"
 ViewObjectName="gov.nasa.jpl.ocio.qars.model.views.PartDiscrepantItemsWithIRVO"
 Conjunction="AND">
 <ViewCriteriaRow
 Name="vcrow26"
 UpperColumns="1">
 <ViewCriteriaItem
 Name="InspectionRecordNumber"
 ViewAttribute="InspectionRecordNumber"
 Operator="="
 Conjunction="AND"
 Value=""
 Required="Optional"/>
 </ViewCriteriaRow>
 </ViewCriteria>
 </ViewCriteriaItem>
 </ViewCriteriaRow>
</ViewCriteria>
and this is in the other view object:
<ViewCriteria
 Name="IRSearchCriteria"
 ViewObjectName="gov.nasa.jpl.ocio.qars.model.views.InspectionRecordVO"
 Conjunction="AND">
 <Properties>... </Properties>
 <ViewCriteriaRow
 Name="vcrow7"
 UpperColumns="1">
 <ViewCriteriaItem
 Name="InspectionRecordNumber"
 ViewAttribute="InspectionRecordNumber"
 Operator="="
 Conjunction="AND"
 Required="Optional"/>
 </ViewCriteriaRow>
 </ViewCriteria>
3) I had a query panel and tree table auto-generated by dragging the data control for ONE of the view object data relationship that's exposed in the app module. Then I created a second query panel and tree table the same way but using the data control for the other. I'm hiding one of the query panels permanently and toggling the visibility of the tree tables based on the display mode the user chooses. Both tables have separate bindings and iterators.
This is a portion of the page definition:
<executables>
 <variableIterator id="variables"/>
 <searchRegion Criteria="IRSearchCriteria"
 Customizer="oracle.jbo.uicli.binding.JUSearchBindingCustomizer"
 Binds="InspectionRecordVOIterator"
 id="IRSearchCriteriaQuery"/>
 <iterator Binds="InspectionRecordVO" RangeSize="25"
 DataControl="QARS_AppModuleDataControl"
 id="InspectionRecordVOIterator" ChangeEventPolicy="ppr"/>
 <iterator Binds="Root.QARS_AppModule.PartsVO1"
 DataControl="QarsMasterAppModuleDataControl" RangeSize="25"
 id="PartsVO1Iterator"/>
 <searchRegion Criteria="PartsVOCriteria"
 Customizer="oracle.jbo.uicli.binding.JUSearchBindingCustomizer"
 Binds="PartsVO1Iterator" id="PartsVOCriteriaQuery"/>
</executables>
4) I've created a custom queryListener to delegate the query event.
This is in my advanced search jsp page:
<af:query id="qryId1" headerText="Search" disclosed="true"
 value="#{bindings.IRSearchCriteriaQuery.queryDescriptor}"
 model="#{bindings.IRSearchCriteriaQuery.queryModel}"
 queryListener="#{pageFlowScope.SearchBean.doSearch}"
 queryOperationListener="#{bindings.IRSearchCriteriaQuery.processQueryOperation}"
 resultComponentId="::resId2" maxColumns="1"
 displayMode="compact" type="stretch"/>
This is in my backing bean:
public void doSearch(QueryEvent queryEvent) {
 String bindingName = flag
 ? "#{bindings.IRSearchCriteriaQuery.processQuery}"
 : "#{bindings.PartsVOCriteriaQuery.processQuery}";
 invokeMethodExpression(bindingName, queryEvent);
 private void invokeMethodExpression(String expr, QueryEvent queryEvent) {
 FacesContext fctx = FacesContext.getCurrentInstance();
 ELContext elContext = fctx.getELContext();
 ExpressionFactory eFactory = fctx.getApplication().getExpressionFactory();
 MethodExpression mexpr =
 eFactory.createMethodExpression(elContext, expr, Object.class, new Class[] { QueryEvent.class });
 mexpr.invoke(elContext, new Object[] { queryEvent });
When no inspection record number (the only search field so far) is supplied in the query panel, then it behaves correctly. Namely, the tree tables shows all search results. However, when an inspection record number is supplied the tree table that was created with the query panel in use (remember there are two query panels, one of them is hidden) shows a single result (this is correct) while the other tree table (the one with the hidden query panel that isn't in use) shows all results (this is NOT correct).
Is what I'm trying to accomplish even doable? If so, what am I missing?
I'm using JDeveloper 11.1.1.7
Thanks,
Bill

I ended up keeping one query panel permanently visible and the other permanently hidden. When performing a search using the table that has the hidden query panel, I seed the query descriptor for the hidden query panel using the visible query panel's query descriptor and then delegate the request:
 public void doSearch(QueryEvent queryEvent) {
 String bindingName = null;
 if(isIrTableRendered()) {
 bindingName = "#{bindings.IRSearchCriteriaQuery.processQuery}";
 } else {
 seedPartsQueryDescriptor();
 bindingName = "#{bindings.PartsVOCriteriaQuery.processQuery}";
 queryEvent = new QueryEvent(partsQuery, partsQuery.getValue());
 invokeMethodExpression(bindingName, queryEvent);
 private void seedPartsQueryDescriptor() {
 ConjunctionCriterion criterion = irQuery.getValue().getConjunctionCriterion();
 for(Criterion criteria : criterion.getCriterionList()) {
 AttributeCriterion attributeCriteria = (AttributeCriterion)criteria;
 List values = attributeCriteria.getValues();
 String qualifiedName = attributeCriteria.getAttribute().getName();
 int indexOfDot = qualifiedName.lastIndexOf(".");
 String name = indexOfDot < 0
 ? qualifiedName
 : qualifiedName.substring(indexOfDot + 1);
 ConjunctionCriterion partsCriterion =
 partsQuery.getValue().getConjunctionCriterion();
 for (Criterion partsCriteria : partsCriterion.getCriterionList()) {
 AttributeCriterion partsAttributeCriteria =
 (AttributeCriterion) partsCriteria;
 String partsQualifiedName =
 partsAttributeCriteria.getAttribute().getName();
 if (partsQualifiedName.endsWith(name)) {
 partsAttributeCriteria.setOperator(attributeCriteria.getOperator());
 List partsValues = partsAttributeCriteria.getValues();
 partsValues.clear();
 for (int i = 0, count = values.size(); i < count; i++) {
 partsValues.set(i, values.get(i));
 private void invokeMethodExpression(String expr, QueryEvent queryEvent) {
 FacesContext facesContext = FacesContext.getCurrentInstance();
 ELContext elContext = facesContext.getELContext();
 ExpressionFactory expressionFactory =
 facesContext.getApplication().getExpressionFactory();
 MethodExpression methodExpression =
 expressionFactory.createMethodExpression(elContext, expr, Object.class, new Class[] { QueryEvent.class });
 methodExpression.invoke(elContext, new Object[] { queryEvent });
Then when the advanced/basic button is pressed for the visible query panel, I programmatically set the same mode for the hidden query panel:
 public void handleQueryModeChange(QueryOperationEvent queryOperationEvent) {
 if(queryOperationEvent.getOperation() == QueryOperationEvent.Operation.MODE_CHANGE) {
 QueryMode queryMode = (QueryMode) irQuery.getValue().getUIHints().get(QueryDescriptor.UIHINT_MODE);
 QueryDescriptor queryDescriptor = partsQuery.getValue();
 queryDescriptor.changeMode(queryMode);
 AdfFacesContext.getCurrentInstance().addPartialTarget(partsQuery);

Exception while retrieving deleted document using metadata based query

Hi,
I am using dbxml 2.4.11 on Mac OS 10.5. My xml documents are stored in the dbxml with some metadata. Index on metadata is built. After delete a document I get an exception (error code is DATABASE_ERROR) while trying to use metadata based query:
com.sleepycat.dbxml.XmlException: Error: DB_NOTFOUND: No matching key/data pair found, errcode = DATABASE_ERROR
at com.sleepycat.dbxml.dbxml_javaJNI.XmlResults_hasNext(Native Method)
at com.sleepycat.dbxml.XmlResults.hasNext(XmlResults.java:136)
at gov.nasa.gsfc.md.mms.dbserver.server.XmlDbServerImpl.selectDocuments(XmlDbServerImpl.java:111)
at gov.nasa.gsfc.md.xdba.server.ApplicationServiceImpl.findDocument(ApplicationServiceImpl.java:99)
the code used to query:
query = ... /DIF[dbxml:metadata('md:Id')='1234']
// Perform the query.
XmlResults results = getXmlManager().query(query, context);
while (results.hasNext()) {
XmlValue xmlValue = results.next();
DocumentDTO documentDTO = new DocumentDTO();
XmlDocument xmlDocument = xmlValue.asDocument();
XmlMetaDataIterator metadataIt = xmlDocument.getMetaDataIterator();
XmlMetaData md = metadataIt.next();
while (md != null) {
String name = md.get_name();
String value = md.get_value().asString();
NameValuePair nameValuePair = new NameValuePair(name,value);
documentDTO.addToMetadataList(nameValuePair);
md = metadataIt.next();
retVal.add(documentDTO);
counter = counter + 1;
results.delete();
context.delete();
As name and value of the metadata I use kind of Id. If I use the query with a never before existing Id, I get the expecting error code DOCUMENT_NOT_FOUND, which is ok.
Anybody has an idea why?
Thanks a lot,
Hoan.

Hi George,
I use now version 2.4.16, built a new database, but I can't found any records using the code mentioned above. First I thought there would be problem on Mac, tried to install the whole database and app on linux, but the problem still persists. The query I am using is:
collection('////usr/server/gcmdx/xmldb/data/live.bdbxml')/DIF[dbxml:metadata('md:docType')='DIF' and dbxml:metadata('md:internalId')='456']
(Switching back to 2.4.11, I find the records inserted)
I can send a record if you want.
Thank you for your help,
Hoan.

Interactive Reporting - Chg Query from Using Table to Result Set w/ same Co

Currently I have a query that uses an Oracle table. I would like to change the query to use the result set of another query wh/ contains the same information & column names (however, since I am creating the results from scratch, I don't have to wait for the Oracle table to be updated). Is there a way to do this change w/o IR automatically removing the column names from the results and then making me go back into each result set and re-adding them, formatting them, etc. For example, the query currently uses a table called Defect_History, wh/ has columns bug_id, application, sub-app, etc. This table is not updated on a daily basis, so I have created a new query wh/ goes against the source tables used in creating the Defect_History table and puts the latest information into an IR result set. Is there a way to change the current queries that use the Defect_History table to use the IR result set instead w/o basically recreating each of the subsequent queries? I have gone into Dashboard Studio Optimize Utility, but the queries show as using Data Model, Data Model2, etc as the Parent and I am not able to make changes to it.
Thanks.
Terri

I am in the Dashboard Studio - Optimize Utility. When I select that report (or any of the others), the Reparent button is grayed out on the toolbar. I've also tried right-clicking on the report and it's grayed out there as well. Any ideas?

Using Powershell Script Run simple query in MS Access 2007 and export the results of query to Excel

Hi Experts,
I have a Access 2007 DB file and 2 Big tables inside that (bigger than the size that can be easily handled by MS Excel 2007).
My requirement is automate using powershell scripts the below things.
1. Create a SQL query in Access DB and save that in access DB
2. Run the saved query and export the result in excel sheet where I can create the charts and Pivots. Thanks in advance
Prajesh

Do you have to use the Access query, couldn't you just recreate the query in Powershell? Here's a link with good info that references an existing script for querying an Access database:
http://blogs.technet.com/b/heyscriptingguy/archive/2009/08/13/hey-scripting-guy-can-i-query-a-microsoft-access-database-with-a-windows-powershell-script.aspx
Once you have your dataset you can pipe it to
Export-Csv -NoType c:\pathtofile\output.csv

How to use Results from Another Query for SAP BW universes

Hi Everyone,
I have two SAP BI universes.In my First universe I have Sales Doc no (dimension) and Orderqty (Measure) and in my second universe I have Sales Doc no(Dimension) and BillQty (Measure).
Here in my first dataprovider I have 1200 rows of data and in second dataprovider I have 75,000 rows. The report should fetch only the BillQty details that matches to corresponding Sales doc no in first data provider.
I want to place all these fileds into a single report like as shown.
(Datarpovider1) (Datarpovider1) (Datarpovider2)
*Sales Doc No* Orderqty BillQty
Here I am able to generate single report using merge dimension but it is leading to performance issues. I want to restrict the values at query level by passing the First dataprovider Sales doc no to second Data provider Sales doc number using Results from Anothery Query feature so that It can fetch only the matching records.
I tried it but it was giving the follwing error:
A filter contains a wrong value. You cannot run this query. (Error: WIS 00007)
How Can I get rid of this error. Can we use Results from Anothery Query option for OLAP universe. Are there any limitation on it.
All this I am doing in Webi Rich Client.
Appreciate your help
Thanks &in Advance
Kiran Saka

Hi Kiran,
I think the filter has a wrong operand. For example, a filter with an empty constant, or a filter that deals with numeric values is defined with an alphanumeric value.Check out for this.
Regards,
Neeraj

Can we use Result from another query in Webi using Bex uery universe?

Hi,
Can we use Result from another query filter option in Webi to create a report using a Bex Query universe?
I need to create a report using two universes, one is Bex Query Universe and the other is Orcle universe. I have two queries, one is using Oracle universe; the other using Bex Query universe. I need to pass the Oracle data from the Oracle query to the Bex Query query to get the matched data from SAP Bex query.
I used Result from another query in the query filter panel for the query using Bex query universe. But I got an error saying that 'A filter contains a wrong value. you cannot run this query. (Error: WIS 00007). The data used in the filter on both sides are the same. they are char.
I have tested by using two queries from the same Bex query universe to see if the Result from another query filter option works. And I got the same error.
Has anyone run into the same issue and if this is possible and what should be the solution?
Thanks in advance!
Edited by: BO_Haiyan on Oct 6, 2010 3:47 PM

In that situation:
Create two queries : Oracle and BW query.
@ Report:
As you have to see result set from both the Dataproviders, correct? To achieve thise one must have common dimension objects to merge them at report and use Objects those are coming from both queries to use them in single Table/Report.
Unless you don't use Merge Dimensions, you don't get a chane to use both queries objects in single Table/Report. (It will give tooltip saying: You can't drop here -- Incompatable Objects)
In case, if you don't have common dimensions, change object definitions to Detail objects, for those required.
Hope it helps you.
Thank You!!

SQL Query -How2bring multiple results into one field using Formatted Search

Hi Everyone
i am trying to bring in the results of the field dbo.Lot_ITEM.LOT using a formatted search into a row level using the following query:
SELECT     dbo.LOT_ITEM.LOT
FROM       dbo.DLN1 INNER JOIN dbo.LOT_ITEM ON dbo.DLN1.ItemCode = dbo.LOT_ITEM.ITEM
WHERE     dbo.LOT_ITEM.ITEM=$[DLN1.ItemCode]
however the result of the dbo.Lot_ITEM.LOT field could be more then one value depending on how many lots are assigned for that item
(for example this query would be similar to assigning batch/serial numbers to an item being despatched - as you can choose multiple batches/serials depending on the quantities available and required and then move from the left to the right side of the selection window) if that makes sense!
is it possible to bring in the multiple results into one field? and how can i amend the above query to include this?
Thankyou in advance :o)
Edited by: Asma Bi on Apr 23, 2008 7:22 PM
Edited by: Asma Bi on Apr 23, 2008 7:24 PM

Hi Suda
Thanks for replying :o) but im not sure about the query?
just to simplify it (as the query im working with is to do with 3rd party addons) i have used the serial/batchs field instead and used standard demo database fields from SBO 2005 sp01:
SELECT     dbo.ixvSerialNoFact.SRI1_IntrSerial
FROM       dbo.DLN1 INNER JOIN
                dbo.ixvSerialNoFact ON dbo.DLN1.DocEntry = dbo.ixvSerialNoFact.SRI1_BaseEntry
WHERE     dbo.ixvSerialNoFact.ItemCode='g1000' and dbo.ixvSerialNoFact.SRI1_BaseEntry = '193'
The above brings me the relevant results but when i change it to be used in a formatted search:
SELECT     dbo.ixvSerialNoFact.SRI1_IntrSerial
FROM       dbo.DLN1 INNER JOIN
                dbo.ixvSerialNoFact ON dbo.DLN1.DocEntry = dbo.ixvSerialNoFact.SRI1_BaseEntry
WHERE     dbo.ixvSerialNoFact.ItemCode=$[dln1.itemcode] and dbo.ixvSerialNoFact.SRI1_BaseEntry = $[dln1.DocEntry]
i cant seem to get it to work - now this may be because the serial number is not allocated until teh record is added to the system, however when this happens i am unable to go back in and manually trigger the query as the delivery note rows cannot be selected!
i think as what im originally wanting an answer for is same as this example, im wanting to know if this is even possible?
Thanks
Edited by: Asma Bi on Apr 24, 2008 3:53 PM
Edited by: Asma Bi on Apr 24, 2008 3:55 PM

Content Query not producing results when using [Me] filter

Hi
I'm using a Content Query web part and I'm trying to show the most recent document modified by each site user by applying it across the site collection and using the Filter, Modified By [_Hidden] equals [Me]. However, this doesn't seem to work for any user
- the web part is always blank. I have tried different combinations such changing equals to contains, and using the Modified By field etc - nothing gives me the correct results. If I instead take the [Me] out and instead use the "people chooser"
and set to a specific person then I seem to get the results I would expect - however I cannot hard code a given user.
Does anyone know how to use [Me] correctly?
Thanks

Hi sjb500,
According to your description, please take steps as below to meet your demand:
With the page layout open in Design view, double-click the Content Query Web Part.
In the Content Query Web Part dialog box, click the plus sign (+) next to Query to expand it.
In the Source section, click Show items from all sites in this site collection.
In List Type section, in the Show items from this list type, click Document Library.
In the Content Type section, in the Show items of this content type group list, click Document
Content Types.
In the Content Type section, in the Show items of this content type list, click Document.
In the Additional Filters section, under Show Items When, click Modified By [_Hidden] in
the first box, click Is Equal To in the second box, and then click [Me].
In the Content Query Web Part dialog box, click the plus sign (+) next to Presentation to expand it.
In the Grouping and Sorting section, in the Sort items by list, click Modified
and Select Show items in descending order.
Click OK.
Reference:http://office.microsoft.com/en-us/sharepoint-designer-help/display-data-from-multiple-lists-with-the-content-query-web-part-HA010174134.aspx
[Me] is a variable that stands for the user who is currently viewing the page that contains the Content Query Web Part in the browser.
Here is some scenarios using [Me] in Content Query Web Part:
http://social.technet.microsoft.com/Forums/en-US/346ffbe6-d7ba-467e-b7f5-6d6e289677a1/user-tasks-web-part
Please inform me freely if you have any questions.
Thanks

Sub Query or Use Result of Query on OLAP BW Universe ?

Similar Messages

Maybe you are looking for