Subcontracting and Split Valuation

Hi
I have following queries
1.During Go-Live how do we upload the stock at Vendor's end which is sent out for subcontracting.
2.During Split Valuation is it necessary to have seperate valuation class for each valuation type.
Regards
Vaibhav Mahajan

Hello,
1.During Go-Live how do we upload the stock at Vendor's end which is sent out for subcontracting.
Answer: <b>You have to upload stock at vendor.</b> Mvt type 561O
2.During Split Valuation is it necessary to have seperate valuation class for each valuation type.
Answer: It is not necessary to have separate valuation class for each valuation type
Additional Information
All materials with the same material type are assigned to just one valuation class.
Different materials with the same material type are assigned to different valuation classes.
Materials with different material types are assigned to a single valuation class.
****Reward points if useful
Regards
Kedar Kulkarni

Similar Messages

  • Remove Batch Management and Split Valuation Dependencies

    Hi,
    I need to remove Batch Management Indicator and Split Valuation for a material. Which one should I do first? Are these dependent on one another?
    Thanks,
    Jograd

    You are correct. It did cause lots of error when i tried to do it in test client.
    I am trying to remove the valuation category of one right now. It has zero stock and no open documents.
    I saw in note Note 155874 - Change valuation category in material master that you need to do this:
    2. If you change from split to joint valuation, no valuation data must
    exist for a valuation type.
    I dont know where to start doing that? Because there is not data for the material. However i noticed that there is valuation for previous period. do i need to delete that too? But there are no stocks for the previous period.
    Please help.
    Thanks,
    Jograd

  • Batch and split valuation simultaneously

    hello all,
    we have scenarios in which both batch management and split valuation is active.
    we are currently uses STO with stocktransport order by using 351 and 101 movements.
    my question is that
    why the sap system does not allow plant to plant stock transfer by using 303 and 305 movement type when both batch management and split valuation is active?
    is this is a sap standard best practice?
    pls explain in detail.
    regards
    sumit simran

    HI,
    try following sap note
    66953 Stock transport order for split-valuated material
    801097 Stock transport order with split valuation
    Regards
    Kailas Ugale

  • Transport of Number range and release proceure and split valuation

    Dear Gurus,
    Can we transport number ranges from PRD server to Quality Server?
    Also, how will we trasport split valuation and release procedure?
    Kindly suggest..

    Hi
    Number ranges you have to create directly as it is not transportable.
    For release Strategy details, all your Release config details are transported Except for the below details
    1. Characteristics &  values assigned to it ( master data)
    2. Class & assigned characteristics to it (master data)
    3. Values/ranges inside the Release strategies ( classification details).
    These three details are to be recreated/assigned in the client you intend to work upon.
    Regards
    SAM

  • Batch and Split valuation

    Hi Friends,
                                      I need bach anagement for all our raw materials and some materials need split valuation ( imported, domestic) based on orizin. When I assign both, valuation type only selectable . But I want the batch control for FIFO. can anybody suggest, how to maintain both options?
    Regards,

    1. split valuation
    Valuation type
    http://www.sap123.com/showthread.php?t=29
    2.batch
    2-a - active batch mgmt in mat master
    2-b- do batch config steps.
    3.  FIFO.
    If Batch Management is active for the materials then use following process;
    First create characteristic in CT04 for Batch Creation Date, under "Addnl data", enter Table Name MCH1 or MCHA (As per Batch Class 022 or 023) and Field ERSDA and save it.
    Assign this characteristics in CL02 in your Batch Class.
    CU70 - Create a Sort Rule and specify the Characteristic of Batch Creation Date and activate "Ascending" indicator.
    Now assign the Sort Rule in MBC1 and keep Selection criteria as "O" for the Strategy type.
    Now do batch determination in MIGO.

  • View Batch Number and Split Valuation

    Hello Friends,
    I  have materials in my plant with Split Valuation ,I am also maintaining the batch Managemnt for a material aginst each vlauation type in batches.
    My query was how to view the batch number & split valuation  simulatenously , of a material
    Kindly suggest

    If you have activated batch management & Valuation for a material. You can see in Reports by changing Layout & Using Batch & Valuation type Fields.
    For Example Material Document Report MB51
    Run Report a normal --> Go to "Settings" -->Laypot ---> Change Layout --> & select & Insert both Batch & Valuation Type fields.
    See the report here you find both details Batch & Valuation Type(For Split Valuation).
    In report where you have no valuation Type field you can differentiate by No. Range as Batch Has & Defined No. Range & Valuation Type has & manualy customized name.
    Regards
    SAMUNDER

  • Batch management and split valuation

    Hello
    Clients wants to report stock by batch level on SAP BI.
    BW stock extracted from R3 is correct on material level. R3 doesnt show stock value for batch.
    Some batches have the following issue :
    only two transactions :
    Transaction    Quantity     Value 
    Receipts            100          1000
    Issue                  100           900
    R3 shows (MB5B) 0 stock quantity for this batch. Data extraction from R3 shows 0 quantity and stock for this batch.
    But  if you calculate stock using movements then it wont be 0.
    Can somedody tell me why it happens.
    Thanks

    HI
    Pls chek it BMBC tcode as per blw steps, it may help you
    1- enter material and plant and excute
    2-click maximise button or ctrl+F2
    3-clcik display selction reslut for stock or F6
    4- u can see the stock details in below tab then
    5-here click "display as list " button, which will give the batch wise stock
    check and revert
    Edited by: Jayakumar Raju A.S on Oct 22, 2009 2:12 PM

  • Material maintained in split valuation and batch management

    Dear Seniors,
      I have maintained a material with both split valuation and batch management. If i check in MMBE, only batch management is getting preference. Valuation type is not coming. Why is it so ? why maintaining both is not possible in SAP ??? kindly explain me please.
    Regards,
    JanaMM

    If you  Mantain both Split valuation as well as batch mgmt for  a material, then  all stock  reports will show  "Batch "  and  Not valuation type  since  batch  is relevant to inventory  mgmt  and split valuation is relevant for account determination and valuation. ,  the only  report which  wil show you both  is BMBC(batch info cockpit).
    You  can however run MB5B  w.r.t  valuation type in the input screen.
    In such cases , The  Valuation Type  forms a part of the batch master which  you can see in MSC3N .

  • GR for a STO with SD delivery and Batches with split valuation X

    Hello,
    We have a problem with the Goods Receipts for Stock Transfer Orders between plants for materials subject to batch split and split valuation with valuation type X.
    The scenario is very similar to the one explained on this thread: STO:problem with batch valuated material
    When creating the the STO, it automatically sets a valuation type that is not be the appropriate one, we cannot use only one valuation type per position because we can use more than one batch (and valuation type). The outbound delivery has the correct valuation types for each batch and material but when doing the GR at the receiving plant, it only takes into account the valuation type indicated in the STO with no chance to change it.
    I have seen the Note 212532 but we are not working with active ingredients.
    Does anybody know a useful EP to use?
    Thanks in advance for your help.
    Regards,
    Javier.

    Well, we can change the valuation type before Posting the goods issue of the delivery, but in most cases we need more than one batch (each batch has a different valuation type) for each item (material) in the purchase order.
    We can do this at delivery level but the GR only takes into account the valuation type of the purchase order.
    Thanks.

  • Split valuation conflict

    Folks,
    2 questions related to split valuation:
    1) We've valuation level at company code and split valuation active. We have set  valuation type A as a default in tcode OMWC. In the stock determination rule, we've set that valuation type A and B can be assigned to a delivery. Now, the default valuation type A will prevent B from doing GR as the default in the PO is set to A. There is no possibility to make different settings in OMWC for external PO's and internal PO's. How can we arrange that a valuation type different from the default can be processed during GR. How can we handle multiple valuation types in 1 PO automatically (so not splitting the different types into different PO-items)?
    2) When entering a specific batch with a different valuation type then the default A, system gives a hard error. Is it possible to have the valuation type of the batch overrule the default?

    Do you have the material master accounting view s created for A and B valuation type?
    What is the exact message  and its message number?

  • VPRS incorrect cost when using Split Valuation

    Hello,
    We are using split valuation thus each valuation type has a separate moving average price. When creating a  billing doc, my pricing procedure is called which includes VPRS. The problem is the cost returned is not for the correct valuation type which is passed in the billing document (Field BWTAR). The cost returned in pricing is the moving average without any valuation type. Does anyone know of any configuration to calculate VPRS based on the batch/valuation type provided in the billing document?
    My pricing procedure includes condition VPRS which is set to SUTOT = B, Reqt = 4 and statistical. The condition type is set to defaults (Cond Class = B, Calculation Type = C, Condition Category = G).  The article master has field Price Control set to V and split valuation is enabled.
    The billing document type being used is FP (POS Interface)
    The item category is DLN
    Any help would be greatly appreciated.
    Thanks,
    Pierre

    Hello Pierre
    I am not totally knowledgeable on this subject but want to give my best shot.
    I think you need to ensure that the system takes (redetermines)  the cost from Valuation segment in the material master.
    1) So make the cond category a T (Moving price). Don't change VPRS but copy it and set up ZPRS and then use it in the pricing procedure as an alternative to VPRS.
    2) You may also  need to work on the copy control- Item cat level-  especially Pricing Rules- Probably you need to set up a custom one which says 'keep manual prices as they are, but redetermine cost". Then you need to set up USEREXIT_PRICING_RULE  from Program RV61AFZA to make this work.  . Use OSS note 24832 to set up your new pricing rule.
    3) Also check out 'Price Source' field- in copy control again-  to see if it helps you achieve your objective.
    Also about VPRS, OSS note 547570 says  "If the condition control (KSTEU) is set to 'H', the cost was taken from the goods issue. If it set to 'A', it was redetermined from the valuation segment of the material master, in case of 'D' or 'E' it was copied from the preceding document:.  But I don't know how you can  use this information.
    Go through these OSS notes and those mentioned within for a good idea of VPRS.
    372772 - How does the system determine the cost?
    547570 - FAQ: VPRS in pricing
    24832 - Pricing rules / TVCPF
    371844 - Correction of incorrect costs
    372760 - Several problems with VPRS
    Hope this helps, Let me know.

  • Material Ledger with Split Valuation Type 'X' with FIFO

    Hi,
       The requirement from the customer is to have Raw Material, Intermediary and Finished Products valued at Actuals and on a FIFO basis. According to me, this is possible only if we activate Material Ledger, have batch split valuation u2018Xu2019 as the valuation type and have a batch search strategy which does a FIFO. Are there any technical issues with this solution? Or is there a better solution? Is any organisation ever using this solution for a similar requirement? As an extension of this requirement, how does commodity trading companies running in SAP handle their inventory and COGS valuation?
    Thanks and Regards
    Shivram.

    Hi,
    Using Material Ledger with batch management and split valuation of each batch ("X") leads to most aaccurate FIFO valuation result, however, depending on how many material and batch the customer has, huge number of materials will be processed and it will affect the performance issues. You should check the number and expected period-end time frame scheduling at least.
    Financial responsible tell you to need this kind of solution (detailed FIFO calculation)?
    They usualy needs to get simple FIFO valuation, meaning they don't care each individual logistic material movement as FIFO, but only care of periodic FIFO. I know, it depends on Finacial responsibes or their auditors, so it's also not general.
    Please double-check the new FIFO valuation function for Material Ledger with using Periodic Closing and AVR. Some information is in SAP Note 1431829 and 1247053. Related transactions are there, CKLMBB_xxxx under Actual Costing/Material Ledger -> Balance Sheet Valuation Procedures. I couldn't find any official documents for Material Ledger + FIFO valuation (like Release Notes).
    Hope this will be an additional option to yours.
    Best regards, Takashi

  • Split valuation for  material with two different price indicator S and V

    Hello Gurus,
    Is it possible to maintain split valuation for same material with two different price indicator S and V.
    For Ex. Material A is manufactured can be manufactured in house ,  procured from outside vendor and can be purchased from subcontracting vendor by providing raw material.
    We want to keep  Price control V for same material " A"  which is procured from outside vendor.
    And price control S for inhouse produced same material " A".
    Besically this material is semifinished and having BOM for subcontracting.
    Please advice.

    Hi
    When the material is split valuated, you maintain the accounting view for the material 1st with valuation category, here the price control should be V.
    When you will extend the material to valuation type "Inhouse mfgd" maintain the price control as S, for valuation type "Procured form outside vendor" maintain it as V.
    Regards
    Prasad

  • Split valuation with batch management and project stock

    Dear Gurus,
    I need to combine two following requirements:
    1. split valuation with batch management (valuation type = batch number)
    2. project stock
    These two functionalities work fine separately but not together.
    I receipt PO for material with spiit valuation on a batch level into a project stock. Posting is OK and material document (MSEG table) seems to be OK (batch number, valuation type and project stock are in this table). The problem appears when I want to display material in this valuation type (MM03) or batch (MSC3n). They don't exist!!!  Short investigation showed that during goods receipt table MBEW (valuated stock) was not updated with this valuation type.
    But If PO is receipt into normal stock first and then posted into project stock everything is OK.
    Have you had or heart about such issue? I would appreciate any sugestion. 
    Thsnks in advance.
    Marcin Bernat

    Hi,
    As you already know ,u are using project stock and doing goods receipt against project, stock table QBEW will be updated and not MBEW. MBEW only updates in case of plant stock valuation. If u receive any goods against project stock it does not contribute to plant stock. Irrespective whether your material is managed in split valuation or not, If it is received against project stock it only updates QBEW. There is no need to update MBEW, if u r using split valuation in project. QBEW also have valuation type as another level like MBEW. If u want to see material price for project stock, it can be  seen in QBEW -valuation type and not in mm03.
    As u r receiving goods against project stock this is d only reason QBEW is updated and not MBEW.
    QBEW will store all information like MBEW for batch number, valuation type and project stock assignment.
    Hope it answers your question.
    Deepak.

  • Split valuation : 'start and stop'

    Friends,
    My simple question is when can we start and stop SPLIT VALUATION.
    how to stop/deactivate, with which situation of stock / PO etc ?

    HI
    Yes it is possible.
    TCode - OMWC.  &  from menu Goto -global catogory-assignements.-
    You can deactivate the valuation catagory for Plants...
    or with respect to vauation catogory u can deactive the valuation classes.
    Regards
    S B H

Maybe you are looking for