Submit report to spool & import spool id
hi all.
I want to submit the report to the sap spool & then import that spool number.
I want to use use SUBMIT statement.
give me the code
Hi,
use this code:
DATA: number TYPE tbtcjob-jobcount,
name TYPE tbtcjob-jobname VALUE 'JOB_TEST',
print_parameters TYPE pri_params.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = name
IMPORTING
jobcount = number
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF sy-subrc = 0.
SUBMIT submitable TO SAP-SPOOL
SPOOL PARAMETERS print_parameters
WITHOUT SPOOL DYNPRO
VIA JOB name NUMBER number
AND RETURN.
IF sy-subrc = 0.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = number
jobname = name
strtimmed = 'X'
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ENDIF.
From jobnumber you obtain the spool number.
Similar Messages
-
Submit report to spool, from page 2?
Dear experts,
I need to send a report to spool via the "submit" command through my program, but I want to print pages from 2 to the end.
SUBMIT rls10020 WITH s1_lgnum = lrf_wkqu-lgnum
WITH s1_lgtyp IN r_lgtyp
WITH s1_lgpla IN r_lgpla
WITH p_vari = disvariant-variant
TO SAP-SPOOL
DESTINATION pri_params_pdest
IMMEDIATELY 'X'
WITHOUT SPOOL DYNPRO
AND RETURN.
there seem to be no parameter available to send my request "FROM PAGE = 2".
although if i send it to spool and go from sp01 to pint with changed parameters I can do it.
Please help. Is there any parameter available for this?
Thank you,
Roxani AthousakiHi,
use this code:
DATA: number TYPE tbtcjob-jobcount,
name TYPE tbtcjob-jobname VALUE 'JOB_TEST',
print_parameters TYPE pri_params.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = name
IMPORTING
jobcount = number
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF sy-subrc = 0.
SUBMIT submitable TO SAP-SPOOL
SPOOL PARAMETERS print_parameters
WITHOUT SPOOL DYNPRO
VIA JOB name NUMBER number
AND RETURN.
IF sy-subrc = 0.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = number
jobname = name
strtimmed = 'X'
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ENDIF.
From jobnumber you obtain the spool number. -
CALL a report from WDA using SUBMIT to sap-spool
Hi,
I need to call a report from one of the methods of a WDA application.
The out of this report is a sapscript. I want show it in WDA (PDF).
The report is called when a user clicks EXECUTE button.
The piece of the code is:
call function 'GET_PRINT_PARAMETERS'
exporting
immediately = 'X'
new_list_id = 'X'
no_dialog = 'X'
receiver = sy-uname
release = 'X'
sap_cover_page = 'X'
importing
out_archive_parameters = t_arcpar
out_parameters = t_pripar
valid = i_valid
exceptions
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
others = 4.
submit hbrcced0
with pnppernr-low eq i_pernr
with pnpbukrs-low eq t_p0001-bukrs
with pnpbegda eq i_begda
with pnpendda eq i_endda
with p_expot eq ''
with ano eq v_gjahr
with respcc eq v_sachn
to sap-spool
spool parameters t_pripar
archive parameters t_arcpar
without spool dynpro
and return.
if sy-calld eq ''.
message 'err' type 'E'.
else.
If i execute this code in WDA, the sy-calld never is equal 'X'.
But if i execute it in program (SE38) the sy-calld is 'X'.
How i can call the program 'hbrcced0' in WDA ?
Cheers,
Silvio GaleryHi Silvio,
a submit REPORT to spool does work from WDA.
ONLY when "and return" is used.
You have that, so it should work.
Note you had print immediate on, so it will be output on printer,
and not available to read after the call.
(which option was the keep after print?, I would have to check docu)
The sy-calld will be set to X inside the REPORT when it is running.
After the submit has run back inside WDA it is of course reset to space again.
Cheers
Phil. -
Suppress spool in Submit Report
Hi All
I am doing a Submit Report in background in loop.
I can check from the background job if the Submit was successful or not. But if it is successful I dont want any output in spool.
By default it is creating a spool request for every Submit.
But dont want any spool to be created as the submit will be executed no. of times.
Kindly let me know if and how we can suppress the spool request. The code I have written is attached below.
LOOP AT lt_t320a INTO ls_t320a.
SUBMIT XYZ
WITH matnr IN matnr
WITH werks = ls_t320a-werks
TO SAP-SPOOL SPOOL PARAMETERS print_parameters
WITHOUT SPOOL DYNPRO
VIA JOB job NUMBER jno
AND RETURN .
ENDLOOP.
Thanks in advance.
Regards
PrafullaHi Narinder,
I have tried without TO SAP-SPOOL but it doesn't work.
Submit is automatically creating the spool request when run in background mode.
Kind Regards
Prafulla -
Hi All,
how to send output of a report to spool and output of of report should not be display and i need spool number in status bar of the selection screen.all this function should happen when i exectute selcetion after providing varient in selection and selection secreen should not change and in staus bar i need spool number.
thanks in advanceTry this too
Consider ZSPOOLTEST holds all your write statements.
call ZSPOOLTEST from a program in this manner
data: mstr_print_parms like pri_params.
data: mi_rqident like tsp01-rqident.
call function 'GET_PRINT_PARAMETERS'
exporting
authority = space
copies = '1'
cover_page = space
data_set = space
department = space
destination = space
expiration = '1'
immediately = space
in_archive_parameters = space
in_parameters = space
layout = space
mode = space
new_list_id = 'X'
no_dialog = 'X'
user = sy-uname
importing
out_parameters = mstr_print_parms
valid = mc_valid
exceptions
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
others = 4.
if mstr_print_parms-pdest = space.
mstr_print_parms-pdest = 'LOCL'.
endif.
submit (ZSPOOLTEST) to sap-spool without spool dynpro "Include any selection screen entries if any
spool parameters mstr_print_parms
and return.
perform get_spool_number using sy-repid
sy-uname
changing mi_rqident.
if mi_rqident is not initial.
message s000(ZSD) with mi_rqident. "Your message triggers here
endif.
form get_spool_number using f_repid
f_uname
changing f_rqident.
data: lc_rq2name like tsp01-rq2name.
concatenate f_repid+0(8)
f_uname+0(3)
into lc_rq2name separated by '__'.
select * from tsp01 where rq2name = lc_rq2name
order by rqcretime descending.
f_rqident = tsp01-rqident.
exit.
endselect.
if sy-subrc ne 0.
clear f_rqident.
endif.
endform." get_spool_number -
Dear all,
I have a requirement to write the report output to spool. For that I have used the syntax, new-page print on and new-page print off. But in ECC 5.0 system is telling that the command is obsolate. Can you please suggest what can be done to write the output of a report to spool? Is there any function module available to write the output to spool?
Thanks and regards,
AtanuHi,
Example
Without archiving
DATA: PARAMS LIKE PRI_PARAMS,
DAYS(1) TYPE N VALUE 2,
COUNT(3) TYPE N VALUE 1,
VALID TYPE C.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION = 'LT50'
COPIES = COUNT
LIST_NAME = 'TEST'
LIST_TEXT = 'SUBMIT ... TO SAP-SPOOL'
IMMEDIATELY = 'X'
RELEASE = 'X'
NEW_LIST_ID = 'X'
EXPIRATION = DAYS
LINE_SIZE = 79
LINE_COUNT = 23
LAYOUT = 'X_PAPER'
SAP_COVER_PAGE = 'X'
COVER_PAGE = 'X'
RECEIVER = 'SAP*'
DEPARTMENT = 'System'
NO_DIALOG = ' '
IMPORTING OUT_PARAMETERS = PARAMS
VALID = VALID.
IF VALID <> SPACE.
SUBMIT RSTEST00 TO SAP-SPOOL
SPOOL PARAMETERS PARAMS
WITHOUT SPOOL DYNPRO.
ENDIF.
Example
With archiving
DATA: PARAMS LIKE PRI_PARAMS,
ARPARAMS LIKE ARC_PARAMS,
DAYS(1) TYPE N VALUE 2,
COUNT(3) TYPE N VALUE 1,
VALID TYPE C.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION = 'LT50'
COPIES = COUNT
LIST_NAME = 'TEST'
LIST_TEXT = 'SUBMIT ... TO SAP-SPOOL'
IMMEDIATELY = 'X'
RELEASE = 'X'
NEW_LIST_ID = 'X'
EXPIRATION = DAYS
LINE_SIZE = 79
LINE_COUNT = 23
LAYOUT = 'X_PAPER'
SAP_COVER_PAGE = 'X'
COVER_PAGE = 'X'
RECEIVER = 'SAP*'
DEPARTMENT = 'System'
SAP_OBJECT = 'RS'
AR_OBJECT = 'TEST'
ARCHIVE_ID = 'XX'
ARCHIVE_INFO = 'III'
ARCHIVE_TEXT = 'Description'
NO_DIALOG = ' '
IMPORTING OUT_PARAMETERS = PARAMS
OUT_ARCHIVE_PARAMETERS = ARPARAMS
VALID = VALID.
IF VALID <> SPACE.
SUBMIT RSTEST00 TO SAP-SPOOL
SPOOL PARAMETERS PARAMS
ARCHIVE PARAMETERS ARPARAMS
WITHOUT SPOOL DYNPRO.
ENDIF.
Best regards,
Prashant -
Hey SAPians,
i am stuck here with an issue. i am trying to print a report using spool in Russian, its status ends in error. however when i try printing same in english its status is complete.
where am i going wrong, how do i make this work?
THANKS IN ADVANCE
AbhinavHi,
Why do you want to do
SELECT *
FROM table_name;
inside the procedure? Why not have your script run the procedure (without the query above), and then do that query afterwards, when you can use SPOOL to put the results in a file?
If you really must write a file from a procedure, here's an example of how to use utl_file.
First, SYSTEM (or some other user with the CREATE ANY DIRECCTORY system privilege) must create a directory, and grant privileges to use it. For example:
CREATE OR RPLEACE DIRECTORY a_dir AS 'C:\Foo\A_Folder';
GRANT ALL ON DIRECTORY a_dir TO PUBLIC;
Typically, SYSTEM does this once, and other people use it hundreds of times.
You might create a file in that directory like this:
CREATE OR REPLACE PROCEDURE write_dept
IS
f utl_file.file_type;
BEGIN
f := utl_file.fopen ('A_DIR', 'Dept.txt', 'W');
FOR r IN ( SELECT *
FROM scott.dept
LOOP
utl_file.put_line ( f
, TO_CHAR (r.deptno, 'FM00')
|| ' '
|| RPAD (r.dname, 15)
|| r.loc
END LOOP;
utl_file.fclose (f);
END write_dept;
SHOW ERRORS -
FBL5N: missing one line item while viewing the report in spool
Hi Experts,
I 've got a problem while viewing FBL5N report in spool. The report is missing one line item, but when I
execute it in foreground, the report was ok.
Can somebody explain?
TQ.Hello,
It seems you should implement notes 1100728 and 1166251 !
Best Regards,
Glayds xing -
Hi,
can any one help me out how to get the output from a report by using the submit report . with out disturbing the report sequence of the calling programme
ie need to capture the output of a report in back ground and use the output in the calling report with out any calling screens or stopping the report sequence,,,,,,,,,,,,
ThankX in advance...............Hi Siva
do it like this
Construct job name
PERFORM job_name USING v_text
v_vsg
CHANGING v_jobname.
Open job
PERFORM job_open USING v_jobname
CHANGING p_jobcnt.
Submit Job
SUBMIT RLKOMM40
WITH p_warehno = warehouse number
WITH p_group = group
VIA
JOB v_jobname NUMBER p_jobcnt
TO SAP-SPOOL WITHOUT SPOOL DYNPRO
WITH immediately = space
WITH keep_in_spool = 'X' AND RETURN.
*& Form job_name
text
FORM job_name USING p_v_text
p_v_vsg
CHANGING p_v_jobname.
CONCATENATE p_v_text p_v_vsg INTO p_v_jobname.
CONDENSE p_v_jobname.
ENDFORM. " job_name
*& Form job_open
text
FORM job_open USING p_v_jobname
CHANGING p_p_jobcnt.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = p_v_jobname
IMPORTING
jobcount = p_p_jobcnt
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " job_open
Do Reward if helpful.
Regards
Azad. -
Will SUBMIT report EXPORTING LIST TO MEMORY work, when Run in Background?
You can use SUBMIT <report> EXPORTING LIST TO MEMORY, and then Call the FM LIST_FROM_MEMORY to get the Data.
This works fine, when the Program is Run in Foreground. My question is, will it work when I Run the Program in Background? i.e. When I Run the Program in Background, will the SUBMIT Statement, Export the List to Memory? Because only then the FM LIST_FROM_MEMORY will get the Data.
Any alternate solution to meet the same requirement will be appreciated.It works for me... my spool output looked like:
11.01.2008 JC: Calling program - test list to memory 1
ZLOCAL_JC_SDN_CALLING_PROGRAM started at 12:54:29
ZLOCAL_JC_SDN_CALLING_PROGRAM call complete 12:54:30
ZLOCAL_JC_SDN_CALLING_PROGRAM started at 12:54:30
11.01.2008 JC: Called program - testing list to memory
ZLOCAL_JC_SDN_CALLED_PROGRAM was called at: 12:54:29
for the following code:
report zlocal_jc_sdn_calling_program.
parameters:
p_start(1) type c.
start-of-selection.
perform testcase.
*& Form testcase
form testcase.
data:
lt_list type table of abaplist.
write: / sy-repid, 'started at', sy-uzeit.
submit zlocal_jc_sdn_called_program
exporting list to memory
and return.
write: / sy-repid, 'call complete', sy-uzeit.
call function 'LIST_FROM_MEMORY'
tables
listobject = lt_list.
write: / sy-repid, 'started at', sy-uzeit.
call function 'WRITE_LIST'
tables
listobject = lt_list.
endform. "testcase
and
report zlocal_jc_sdn_called_program.
start-of-selection.
write: / sy-repid, 'was called at:', sy-uzeit. -
Skip Error message in submit report
Hello Gurus,
I am using SUBMIT <REPORT> command inside a loop of my calling report. For one record the SUBMIT <report> is throwing an eror message due to which my report is getting stopped by displaying the error message.
My requirement is to skip the record if there is any error in SUBMIT <report> and process rest of the records.
Please help me out.Hi,
Vasanth's idea regarding doing a CALL FUNCTION IN BACKGRUOND TASK does work, unless you need to get back some information from the SUBMIT, as export parameters can't be set when using IN BACKGRUOND TASK.
As i need to get data from the SUBMIT, i'll keep looking for other alternatives, so other ideas are still welcome...
Regards,
mr.
Hi Manuel,
Try calling report in background task like below:
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = c_name "this name can be any name defined in constants(you do not have to create a job name anywhere in system or SM36)
IMPORTING
jobcount = w_number
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
*" Job opened successfully
IF sy-subrc EQ c_0.
*" Call program to process IDoc
SUBMIT ZSubmit WITH <any value> " e.g. p_field1 EQ <value>
VIA JOB c_name NUMBER w_number
AND RETURN.
[Note: In ZSubmit report you can send the data to calling program through ABAP memory i.e. Use EXPORT parameter to export data
Ex: constants: c_memory(7) type c value 'MEMORY1'.
At the end of ZSubmit report, before returning to the calling program write below statement:
EXPORT i_message TO MEMORY ID c_memory1.]
*" Successful processing of IDoc
IF sy-subrc EQ c_0.
"Here you can import data from ZSubmit report
import i_message from memory id c_memory1.
After retrieving the data, free the memory otherwise it will affect the performance of your report:
Free memory id c_memory1.
*" Close the job
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = w_number
jobname = c_name
strtimmed = c_x
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
ENDIF.
ENDIF.
Hope this helps!
Regards,
Saba -
Submit report to get output list
Hi friends,
I have one requirement to take output list of a transaction in one internal table.
As the transaction is very much interactive , that perticular internal table gets populated somewhere in the middle of the standard program...later on that table undergoes further processing to cope up with he interaction...
using SUBMIT report , we can export it to memory
and using FM 'LIST_FROM_MEMORY' we can get it back as following.
list_tab contains data in two fields RFCSIZE and RFCRECORD in numbers only...
Submit report_name with SELECTION-TABLE SELTAB
exporting list to Memory and return.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = list_tab
EXCEPTIONS
not_found = 1
OTHERS = 2.
BUT , Can we get the same output list (i.e before interaction) in one internal table...
thanksHi,
You can check whether the list is exported in between before the submit.
Supposed it is exported before the interaction den you can import it ..Just check the value is fetched and stored in a temporary table.
Is it a csutom program or standard SAP one..?
Hope this helps.
Regards,
Navin. -
Submit report with dynamic selections
Hi All,
I am trying to Submit a report with dynamic selections. I am using the option SUBMIT REPORT WITH FREE SELECTIONS.
But the dynamic selections are not getting passed.
Request you to kindly provide some inputs
My code is
DATA: trange TYPE rsds_trange,
trange_line LIKE LINE OF trange,
trange_frange_t_line LIKE LINE OF trange_line-frange_t,
trange_frange_t_selopt_t_line LIKE LINE OF trange_frange_t_line-selopt_t,
texpr TYPE rsds_texpr.
trange_line-tablename = 'PA0002'.
*trange_frange_t_line-tablename = 'PA0002'.
trange_frange_t_line-fieldname = 'GBJHR'.
trange_frange_t_selopt_t_line-sign = 'I'.
trange_frange_t_selopt_t_line-option = 'EQ'.
trange_frange_t_selopt_t_line-low = '1987'.
trange_frange_t_selopt_t_line-high = '1987'.
APPEND trange_frange_t_selopt_t_line TO trange_frange_t_line-selopt_t.
APPEND trange_frange_t_line TO trange_line-frange_t.
APPEND trange_line TO trange.
CALL FUNCTION 'FREE_SELECTIONS_RANGE_2_EX'
EXPORTING
field_ranges = trange
IMPORTING
expressions = texpr.
submit RPCADVQ0
VIA SELECTION-SCREEN
WITH SELECTION-TABLE rspar_tab
WITH FREE SELECTIONS it_texpr
and returN.
Kindly provide your inputs
Regards
ReshmaHi Reshma,
Use the FM - RS_REFRESH_FROM_DYNAMICAL_SEL before FREE_SELECTIONS_RANGE_2_EX.
data: trange type rsds_trange,
g_repid type sy-repid.
g_repid = 'RPCADVQ0'.
call function 'RS_REFRESH_FROM_DYNAMICAL_SEL'
exporting
curr_report = g_repid
mode_write_or_move = 'M'
importing
p_trange = trange
exceptions
not_found = 1
wrong_type = 2
others = 3.
if sy-subrc eq 0.
" Do the changes to the trange
CALL FUNCTION 'FREE_SELECTIONS_RANGE_2_EX'
EXPORTING
field_ranges = trange
IMPORTING
expressions = texpr.
submit RPCADVQ0
VIA SELECTION-SCREEN
WITH SELECTION-TABLE rspar_tab
WITH FREE SELECTIONS it_texpr
and returN.
endif.
Cheers,
Kothand -
Report output list to internal table using submit report
Hello,
I have a report that generates the output in the form of an abap list. I want this data in an internal table for further processing. the report internally does not do a export data to memory so i cannot use import later on to get the data.
i did the following
SUBMIT <report name> exportING LIST TO MEMORY and return.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = itab_list
EXCEPTIONS
not_found = 4
OTHERS = 8.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
list_index = -1
TABLES
listasci = ascitab
listobject = itab_list
EXCEPTIONS
empty_list = 1
list_index_invalid = 2
OTHERS = 3.
This returns the data in the ascitab, but the data contains additional unwanted info like lines and hyphens etc. Also the data is in a table with a single column, so pulling out individuals fields is again an issue. Is there a way to get this data into an internal table directly?
best regards,
Surajhi suraj
export the internal table of report
DATA: BEGIN OF SR_VBAK ,
VBELN LIKE VBAK-VBELN,
END OF SR_VBAK.
DATA: IR_VBAK LIKE STANDARD TABLE OF SR_VBAK WITH HEADER LINE.
EXPORT IR_VBAK TO MEMORY ID 'SALES'.
SUBMIT <program name in which u want internal table records > AND RETURN.
now import that data in submit program .
here u have to creat a internal table with same structure as the internal table from which u r trying to export the data
DATA: BEGIN OF SR_VBAK,
VBELN LIKE VBAK-VBELN,
END OF SR_VBAK.
DATA : IR_VBAK LIKE STANDARD TABLE OF SR_VBAK WITH HEADER LINE.
IMPORT IR_VBAK FROM MEMORY ID 'SALES'.
regards
ANIL CHAUDHaRY -
Hello Friends
I am calling another report in my program , I am passing the parameter to that program within my same program, but i don't want to get the output screen of the submitted report and it should process without displaying output screen
Hope you will understand my requirement.
Thanks in Advance
Nagaraj Su can run it in the background
*Submit report as job(i.e. in background)
data: jobname like tbtcjob-jobname value
' TRANSFER TRANSLATION'.
data: jobcount like tbtcjob-jobcount,
host like msxxlist-host.
data: begin of starttime.
include structure tbtcstrt.
data: end of starttime.
data: starttimeimmediate like btch0000-char1.
Job open
call function 'JOB_OPEN'
exporting
delanfrep = ' '
jobgroup = ' '
jobname = jobname
sdlstrtdt = sy-datum
sdlstrttm = sy-uzeit
importing
jobcount = jobcount
exceptions
cant_create_job = 01
invalid_job_data = 02
jobname_missing = 03.
if sy-subrc ne 0.
"error processing
endif.
Insert process into job
SUBMIT zreport and return
with p_param1 = 'value'
with p_param2 = 'value'
user sy-uname
via job jobname
number jobcount.
if sy-subrc > 0.
"error processing
endif.
Close job
starttime-sdlstrtdt = sy-datum + 1.
starttime-sdlstrttm = '220000'.
call function 'JOB_CLOSE'
exporting
event_id = starttime-eventid
event_param = starttime-eventparm
event_periodic = starttime-periodic
jobcount = jobcount
jobname = jobname
laststrtdt = starttime-laststrtdt
laststrttm = starttime-laststrttm
prddays = 1
prdhours = 0
prdmins = 0
prdmonths = 0
prdweeks = 0
sdlstrtdt = starttime-sdlstrtdt
sdlstrttm = starttime-sdlstrttm
strtimmed = starttimeimmediate
targetsystem = host
exceptions
cant_start_immediate = 01
invalid_startdate = 02
jobname_missing = 03
job_close_failed = 04
job_nosteps = 05
job_notex = 06
lock_failed = 07
others = 99.
if sy-subrc eq 0.
"error processing
endif.
Maybe you are looking for
-
Seeing times in day and week view
Is it possible to see times (eg 7.00am, 7.30am, 8.00am, 8.30am, 9.00am, etc etc) along the y axis in day and week view of iCal? I can only see actual times when I in the process of making appointments, ie when wiping my cursor over a section of the p
-
ITunes and Front-Row no longer in Sync
Since I moved my whole iTunes library to an external drive, Front-Row is no longer showing if a TV Show is new or not. And it won't update the iTunes counter for that show. The video-podcasts are working correctly. When I download a new one, it shows
-
I need help! On following tables, "Proj_Dict_Cost" is a cost list to be a dictionary, And I want keep the accumulatative relation on "Proj_Cost". But It doesnot work Return an Error with code -4091. Where I missed? create table Proj_Dict_Cost ( Cost_
-
Changes to applications and gaming have no effect on WRT54Gv2.2 and restarting breaks routing
If I power off my router and power it back on, nothing on my network can get out and none of the port forwarding works. If I log into the router and use diagnostics to ping stuff outside my network it works just fine, but nothing on my network works
-
Hi! I`m very beginner and I would like to know how can I make models?For example a cube,which I can move in the program?Where can I read about this.I don`t understand the official articles.I use j2sdk1.4.2_08 .Thanks for all help.