.SubmitChanges does not update foreign key to the database

My problem occurs in a Windows Phone 8.1 Silverlight VB application. The CatDataContext defines a table Books with items Title and a foreign key _seriesID, with belongs to a table Series.
Updating of the field Title alone, or the fields Title and _seriesID works fine. However when I only change the _seriesID then no update of the underlying database is done. In this case .GetModifiedMembers shows no modifications.
A demo project with this problem is available.

Your demo project url is missing, check it.

Similar Messages

I have iCloud on my iMac, macbook and iPhone. However, when I update my contacts on one, it does not update on any of the other devices. The calendar seems to be working. Any suggestions?

I have iCloud on my iMac, macbook and iPhone. However, when I update my contacts on one, it does not update on any of the other devices. The calendar seems to be working. Any suggestions?

On the iMac and MacBook open System Preferences > iCloud
Deselect the box next to Contacts, then reselect it then restart the Macs.
On the iPhone tap Settings > iCloud
Switch Contacts off then back on then restart the iPhone.
Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.

I cleared the cache and my site does not update! What's the secret?

I cleared the cache and my site does not update! What's the secret? I created a second website and bought a domain name. You can get to the site by it's mac name or the purchased domain name. I linked the domain name and with my server and it works. The site comes up wither way. BUT, either way, I cannot get my changes to appear. I had realized that my links were not working because I had placed them within the header. So, I moved the links out of the header, republished, and now the new pages (with links in body of website) will not load. Here are the two ways to get to see the site. Both show the old way (links in header). What is up with me not being able to see the changes in either Firefox or Safari?
http://www.frankysoldiesbutgoodies.com/
http://web.mac.com/musbegin/iWeb/OldiesButGoodies/OldiesButGoodies.html
Thanks,
musicalbeginnings

hello mccormick.lee, please try downloading the full setup file for the current firefox version from https://www.mozilla.org/firefox/all/ and install it on top of your current installation.

The contained field name "ADTAGR" does not exist in any of the database tab

hı all
how can l solved thıs problem
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "PUT_QMFECAT" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An Open SQL clause was specified dynamically. The contained field name
"ADTAGR" does not exist in any of the database tables from the FROM clause.
Information on where terminated
    Termination occurred in the ABAP program "SAPDBZQNQ" - in "PUT_QMFECAT".
    The main program was "ZQMR_BILDIRIM ".
    In the source code you have the termination point in line 732
    of the (Include) program "SAPDBZQNQ".
Error occurred during batch input processing
    The termination is caused because exception "CX_SY_DYNAMIC_OSQL_SEMANTICS"
     occurred in
    procedure "PUT_QMFECAT" "(FORM)", but it was neither handled locally nor
     declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPDBZQNQ "; its source code begins in line
    715 of the (Include program "SAPDBZQNQ ".
FORM put_qmfecat.
DATA: l_tab_fields TYPE rsfs_tab_fields.
DATA: l_ds_clauses TYPE rsds_where.
Dynamische Feldselektion
MOVE 'QMFECAT_C' TO l_tab_fields-tablename.
READ TABLE select_fields WITH KEY l_tab_fields-tablename
                                INTO l_tab_fields.
IF sy-subrc <> c_rc00.
    CLEAR l_tab_fields.
ENDIF.
Dynamische Selektionskriterien
MOVE 'QMFECAT' TO l_ds_clauses-tablename.
READ TABLE dyn_sel-clauses WITH KEY l_ds_clauses-tablename
                             INTO l_ds_clauses.
DB-Zugriff
>>>>> SELECT (l_tab_fields-fields) FROM qmfe
INTO CORRESPONDING FIELDS OF TABLE qmfecat_tab
   WHERE qmnum = rqmqmel-qmnum
   AND kzloesch = space
   AND (l_ds_clauses-where_tab)
   ORDER BY PRIMARY KEY.
regard sinan
Edited by: eyup_sinan on Jan 6, 2012 3:21 PM
Edited by: eyup_sinan on Jan 6, 2012 3:30 PM

You seem to have made a copy of the standard program. You'll have to make sure that you are handling this field correctly in your code.
Rob

How do I update my adobe flahplayer OS X 10.6.8? It does not update when I install the update from the adobe site

When I try to update my adobe flashplayer from the adobe website it does not show updated and I still get the error that my adobe is out of date.

Try un-installing and then re-installing.
Adobe Flash Uninstaller
Adobe Flash Player

Itunes does not update playlists properly on the ipod touh 4g - help??

Hi Guys,
Newbie here. Thanks for the help in advance.
I have an ipod touch 4g with the latest 5.1 OS update and the latest itunes installed 10.6.1.7 on my computer.
I usually make and edit playlists on my computer/itunes and then sync it with the ipod.
Lately what itunes has started doing is that it syncs the songs and other things like i want to but when it comes to playlists it will either sync playlists to the ipod with a couple of songs missing from the original playlists or only a couple of songs or just a playlist with no songs . The playlists look fine on the itunes but not on the ipod. The songs are physically there on the ipod and it syncs them fine but not the playlists. Some playlists are okay other are not. No consistency. Sometimes this and sometimes that.
Has anybody got any ideas why it is likely doing this?? software screwup?? some option that i am not selecting or something??

okay, I don't know about the rest, but about the songs never actually loading onto your iPod, I found in another discussion how to fix that. I'm using Windows 7, so I don't know if the steps are the same, but the end result is the same. So go into your Start menu, then into accessories, right click 'Command Prompt' and click 'Run as administrator'. Then type in the following: netsh winsock reset then press Enter. After a few seconds it should tell you to to restart your computer for changes to take effect. Restart your computer, then restart iTunes, then everything should be working fine. It still takes forever sometimes to update the iPod, but eventually it will work. I've had to do this multiple times, so I'd suggest copying & pasting this solution into a notepad or Word document and saving it on your computer, so you don't have to go through the discussions again to find it. This tends to happen to me nearly every day unfortunately Hope this fixes that problem, but I'm not having any of the other problems fortunately, except for removing the artwork of the songs it updates without me asking it too. PS I think my problem may be with iOS 5, because iTunes 10.5 came out before iOS 5, and I think everything was fine before I updated my iPod, but I really don't know where the problem lies

Type 2 SCD -- does not update the old value.

I have following columns in the source table:
SSN, credit_score
In the target, I have following columns,
SK_ID, SSN, credit_score, flag
I am flagging the old credit_score as 'N' when updating the row and at the same time it is supposed to enter a new credit score with flag 'Y' in another row.
Second, If a row is completely new, It should be inserted with the flag 'Y'.
SK_ID is the surrogate key and SSN is the natural key, My trigger column is credit_score.
The problem is that when I run this type 2 mapping, it does not update anything but inserts the new rows only.
I have posted the screen shots at the following link.
http://www.box.net/shared/ea9v48r0xa
Thanks for your help in advance.

First of all, thanks for the reply...
You can also look at the screen shots I posted in previous post.
Here is how I am updating the rows (update logic).
If source_SSN=target_SSN and source_credit_score!=target_credit_score
then flag = 'N' (this is the update from 'Y' to 'N' after which i will insert a new row containing new value of credit_score with flag 'Y')
As an example, if my old rows in the target table were:
sk_id SSN credit_score flag
101 2212 654 Y
102 3023 707 Y
Now let's say my source table has these values.
SSN credit_score
2212 648
2220 690
Then my target table should be like this:
sk_id SSN credit_score flag
101 2212 654 N
103 2212 648 Y
102 3023 707 Y
104 2220 690 Y
Do you see what I mean...

E52 Date Display does not update and reflect the c...

Right from day 1 the display date of my E52 does not update and reflect correct the correct date. Got the phone replaced once still the same issue. Called the customer service and they say there is no such problem with E52. They asked me to go to the repair center...(isnt that ridiculous to ask a customer of a new phone to do so?). I went to the repair center with a hope that they will replace it for me but all in vain. They also gave me a ridiculous answer that Nokia does not have a replacement policy...and I was like so is it Nokia's policy to sell broken and faulty mobiles? I was utterly dejected. The electronic store where I bought also refuse to replace because they think there is a problem and no matter I get it changed it will recur. I still do not have a solution as all my ways of getting this problem resolved are exhausted. Anyone has a solution or came across this issue which can be solved without repairing?

Ok let me state my problem. There is a date display and at midnight the date should automatically change to the next date. However that does not happen. The dealer makes the following changes Control Panel>Settings>General>Date and time> Automatic time update> On and this does not solve the problem. Then I get the mobile replaced and that too has the same problem. after going through all permutations and combinations the problem persists. To quote the email from the Contact center for Nokia in HK this was what was suggested
Menu→Ctrl. panel→Settings→General→Date and time→Time zone→please select Hong Kong→Automatic time update→please select Off
However, if the situation still occurred by following the above settings, please be advised to bring your Nokia E52 along with the valid sales invoice to one of our Hong Kong Nokia Care Centres for the handset checking since we do not have such arrangement of replacing a new phone to you.
Please help!!!

Time stamp does not update automatically

Hi, All. I want include the time stamp (yyyy-mo-dd-min-sec) in the file name. However, the value of the time stamp does not update automatically/synchronizes with the computer clock at each new run. I need to do it manually with the right click and update the time to the current.
How can I solve this? Thanks a lot in advance.

What does this have to do with NI counter/timer hardware?
What language are you using and what function are you using to get a timestamp? If the language is LabVIEW, then all you need is Get Date/Time in Seconds. If you are using a front panel Time Stamp control, then you are using the incorrect function.

Real time ROLAP or Automatic molap cubecube does not update the value

Hello Everyone,
I am working with Real time Rolap and Automatic MOLAP cube. I had created cube using AdventureWorks DW sample given by Microsoft Tutorial. when i fire insert query, It updates data. It works fine in both the cases after reconnecting in SSMS and SSAS browser.
But I have a one database table in SQL server with 4 varchar and 10 numeric fields [simple table with one primary key without any relationship with other table]. I tried to create both type of cube from direct database table [selecting varchar fields as
dimensions and numeric as measures], created partitions, specified server side tracking table. It processes the cube. but when i add rows into this table. It inserts record but does not update in SSAS browser or SSMS browser.
Please help me what is the problem???
Thanks in Advance!

I noticed the same behavior reported by Bob: Not regarding the "process filter" or the "update frequency" selected "CPU Time" column is only updated when details dialog is open. I noticed it just today (which triggered the search here), I wonder if this "feature" has been always present or maybe activity monitor is getting lazy?
Regards,
Mauro

My firefox beta 12 using Linux platform does not update to firefox RC1 via the "check for update" function. I know windows' beta version had this fixed, when would Linux get similar support ?

Current platform : Linux
Current firefox version : Firefox 4 beta 12
Issue : does not update to RC 1 using the check for update feature.
Background : previously downloaded beta 8 and then it automatically updated to beta 12 using update features but for RC1, it does not.
I know users under Windows platform had same problem but was resolved and they can now update via check for update feature.
Please implement for Linux users too.
Thanks !!

If you can't update then you can download and install the full Firefox 4 RC version.
* http://www.mozilla.com/firefox/all-beta.html

Can't add music my iPhone from iTunes. When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load. [Manually manage music and videos] is checked. And, this is the only Mac I have ever used to

Can't add music my iPhone from iTunes.
When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load.
[Manually manage music and videos] is checked. And, this is the only Mac I have ever used to add music to my phone.
Also, just updated the phone's software today, and iTunes' software is already up to date.

Hi Gregg,
Have you tried resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Home screen redisplays, see if your Music app is behaving normally.
Cheers,
GB

HT2513 The date on my dock does not update automatically ? - Ps anybody.

I use MACCBOOK PRO with OS X ver 10.6.8.
I Cal Version 4.0.4 (1395.7)
Sometimes the current date does not update on my ical icon in the dock. After clicking on it the date becomes OK.
I would appreciate if someone has a solution.

I solved the problem by uninstalling Glims.

Batch Split in OBD & billed for the entire Quantity .RG1 register does not update the excise values

Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank you

My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi

I updated an iphone 3g and it does not want to restore after the backup.

i have an old iphone 3g and there was an update available from my itunes. i updated and it went through the whole process, but when it started to restore and update i get a message saying that device was unable to restore unknown error (1015) i have updated my itunes to the most recent version and i restarted my computer but i still get the same error code. i dont know what else to do. and right know i cant afford to pay for online support. what eles can i do to fix this?? PLEASE HELP!!

Welcome to the discussions,
did you try to connect in recovery mode? http://support.apple.com/kb/HT1808
If this does not work, try to delete the iphone software file located in C:\Documents and Settings\username\Application Data\Apple Computer\iTunes\iPhone Software Updates to make iTunes download a new copy when you connect in recovery mode. Maybe the file stored on your PC is damaged.
Message was edited by: Ingo2711

.SubmitChanges does not update foreign key to the database

Similar Messages

Maybe you are looking for